6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jeremy Kerr jk@codeconstruct.com.au
commit dba7567c2fbbf10a4de2471cdb0e16e5572dc007 upstream.
In the aspeed UDC setup, we configure the UDC hardware with the assigned USB device address.
However, we have an off-by-one in the bitmask, so we're only setting the lower 6 bits of the address (USB addresses being 7 bits, and the hardware bitmask being bits 0:6).
This means that device enumeration fails if the assigned address is greater than 64:
[ 344.607255] usb 1-1: new high-speed USB device number 63 using ehci-platform [ 344.808459] usb 1-1: New USB device found, idVendor=cc00, idProduct=cc00, bcdDevice= 6.10 [ 344.817684] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 344.825671] usb 1-1: Product: Test device [ 344.831075] usb 1-1: Manufacturer: Test vendor [ 344.836335] usb 1-1: SerialNumber: 00 [ 349.917181] usb 1-1: USB disconnect, device number 63 [ 352.036775] usb 1-1: new high-speed USB device number 64 using ehci-platform [ 352.249432] usb 1-1: device descriptor read/all, error -71 [ 352.696740] usb 1-1: new high-speed USB device number 65 using ehci-platform [ 352.909431] usb 1-1: device descriptor read/all, error -71
Use the correct mask of 0x7f (rather than 0x3f), and generate this through the GENMASK macro, so we have numbers that correspond exactly to the hardware register definition.
Fixes: 055276c13205 ("usb: gadget: add Aspeed ast2600 udc driver") Cc: stable@vger.kernel.org Reviewed-by: Neal Liu neal_liu@aspeedtech.com Reviewed-by: Andrew Jeffery andrew@codeconstruct.com.au Signed-off-by: Jeremy Kerr jk@codeconstruct.com.au Link: https://lore.kernel.org/r/20240613-aspeed-udc-v2-1-29501ce9cb7a@codeconstruc... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/gadget/udc/aspeed_udc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/usb/gadget/udc/aspeed_udc.c +++ b/drivers/usb/gadget/udc/aspeed_udc.c @@ -66,8 +66,8 @@ #define USB_UPSTREAM_EN BIT(0)
/* Main config reg */ -#define UDC_CFG_SET_ADDR(x) ((x) & 0x3f) -#define UDC_CFG_ADDR_MASK (0x3f) +#define UDC_CFG_SET_ADDR(x) ((x) & UDC_CFG_ADDR_MASK) +#define UDC_CFG_ADDR_MASK GENMASK(6, 0)
/* Interrupt ctrl & status reg */ #define UDC_IRQ_EP_POOL_NAK BIT(17)