6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Remi Pommarel repk@triplefau.lt
[ Upstream commit befd716ed429b26eca7abde95da6195c548470de ]
On full monitor HW the monitor destination rxdma ring does not have the same descriptor format as in the "classical" mode. The full monitor destination entries are of hal_sw_monitor_ring type and fetched using ath11k_dp_full_mon_process_rx while the classical ones are of type hal_reo_entrance_ring and fetched with ath11k_dp_rx_mon_dest_process.
Although both hal_sw_monitor_ring and hal_reo_entrance_ring are of same size, the offset to useful info (such as sw_cookie, paddr, etc) are different. Thus if ath11k_dp_rx_mon_dest_process gets called on full monitor destination ring, invalid skb buffer id will be fetched from DMA ring causing issues such as the following rcu_sched stall:
rcu: INFO: rcu_sched self-detected stall on CPU rcu: 0-....: (1 GPs behind) idle=c67/0/0x7 softirq=45768/45769 fqs=1012 (t=2100 jiffies g=14817 q=8703) Task dump for CPU 0: task:swapper/0 state:R running task stack: 0 pid: 0 ppid: 0 flags:0x0000000a Call trace: dump_backtrace+0x0/0x160 show_stack+0x14/0x20 sched_show_task+0x158/0x184 dump_cpu_task+0x40/0x4c rcu_dump_cpu_stacks+0xec/0x12c rcu_sched_clock_irq+0x6c8/0x8a0 update_process_times+0x88/0xd0 tick_sched_timer+0x74/0x1e0 __hrtimer_run_queues+0x150/0x204 hrtimer_interrupt+0xe4/0x240 arch_timer_handler_phys+0x30/0x40 handle_percpu_devid_irq+0x80/0x130 handle_domain_irq+0x5c/0x90 gic_handle_irq+0x8c/0xb4 do_interrupt_handler+0x30/0x54 el1_interrupt+0x2c/0x4c el1h_64_irq_handler+0x14/0x1c el1h_64_irq+0x74/0x78 do_raw_spin_lock+0x60/0x100 _raw_spin_lock_bh+0x1c/0x2c ath11k_dp_rx_mon_mpdu_pop.constprop.0+0x174/0x650 ath11k_dp_rx_process_mon_status+0x8b4/0xa80 ath11k_dp_rx_process_mon_rings+0x244/0x510 ath11k_dp_service_srng+0x190/0x300 ath11k_pcic_ext_grp_napi_poll+0x30/0xc0 __napi_poll+0x34/0x174 net_rx_action+0xf8/0x2a0 _stext+0x12c/0x2ac irq_exit+0x94/0xc0 handle_domain_irq+0x60/0x90 gic_handle_irq+0x8c/0xb4 call_on_irq_stack+0x28/0x44 do_interrupt_handler+0x4c/0x54 el1_interrupt+0x2c/0x4c el1h_64_irq_handler+0x14/0x1c el1h_64_irq+0x74/0x78 arch_cpu_idle+0x14/0x20 do_idle+0xf0/0x130 cpu_startup_entry+0x24/0x50 rest_init+0xf8/0x104 arch_call_rest_init+0xc/0x14 start_kernel+0x56c/0x58c __primary_switched+0xa0/0xa8
Thus ath11k_dp_rx_mon_dest_process(), which use classical destination entry format, should no be called on full monitor capable HW.
Fixes: 67a9d399fcb0 ("ath11k: enable RX PPDU stats in monitor co-exist mode") Signed-off-by: Remi Pommarel repk@triplefau.lt Reviewed-by: Praneesh P quic_ppranees@quicinc.com Link: https://patch.msgid.link/20240924194119.15942-1-repk@triplefau.lt Signed-off-by: Jeff Johnson quic_jjohnson@quicinc.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/ath/ath11k/dp_rx.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/dp_rx.c b/drivers/net/wireless/ath/ath11k/dp_rx.c index 73f299f65e2eb..d01616d06a326 100644 --- a/drivers/net/wireless/ath/ath11k/dp_rx.c +++ b/drivers/net/wireless/ath/ath11k/dp_rx.c @@ -5224,8 +5224,11 @@ int ath11k_dp_rx_process_mon_status(struct ath11k_base *ab, int mac_id, hal_status == HAL_TLV_STATUS_PPDU_DONE) { rx_mon_stats->status_ppdu_done++; pmon->mon_ppdu_status = DP_PPDU_STATUS_DONE; - ath11k_dp_rx_mon_dest_process(ar, mac_id, budget, napi); - pmon->mon_ppdu_status = DP_PPDU_STATUS_START; + if (!ab->hw_params.full_monitor_mode) { + ath11k_dp_rx_mon_dest_process(ar, mac_id, + budget, napi); + pmon->mon_ppdu_status = DP_PPDU_STATUS_START; + } }
if (ppdu_info->peer_id == HAL_INVALID_PEERID ||