5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Giulio Benetti giulio.benetti@benettiengineering.com
[ Upstream commit 5ae4b0d8875caa44946e579420c7fd5740d58653 ]
Errata ERR010450 only shows up if voltage is 1.8V, but if the device is supplied by 3v3 the errata can be ignored. So let's check for if quirk SDHCI_QUIRK2_NO_1_8_V is defined or not before limiting the frequency.
Cc: Jim Reinhart jimr@tekvox.com Cc: James Autry jautry@tekvox.com Cc: Matthew Maron matthewm@tekvox.com Signed-off-by: Giulio Benetti giulio.benetti@benettiengineering.com Acked-by: Haibo Chen haibo.chen@nxp.com Acked-by: Adrian Hunter adrian.hunter@intel.com Link: https://lore.kernel.org/r/20230811214853.8623-1-giulio.benetti@benettiengine... Signed-off-by: Ulf Hansson ulf.hansson@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mmc/host/sdhci-esdhc-imx.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index 70f388f83485c..b030f657e2534 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -166,8 +166,8 @@ #define ESDHC_FLAG_HS400 BIT(9) /* * The IP has errata ERR010450 - * uSDHC: Due to the I/O timing limit, for SDR mode, SD card clock can't - * exceed 150MHz, for DDR mode, SD card clock can't exceed 45MHz. + * uSDHC: At 1.8V due to the I/O timing limit, for SDR mode, SD card + * clock can't exceed 150MHz, for DDR mode, SD card clock can't exceed 45MHz. */ #define ESDHC_FLAG_ERR010450 BIT(10) /* The IP supports HS400ES mode */ @@ -873,7 +873,8 @@ static inline void esdhc_pltfm_set_clock(struct sdhci_host *host, | ESDHC_CLOCK_MASK); sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL);
- if (imx_data->socdata->flags & ESDHC_FLAG_ERR010450) { + if ((imx_data->socdata->flags & ESDHC_FLAG_ERR010450) && + (!(host->quirks2 & SDHCI_QUIRK2_NO_1_8_V))) { unsigned int max_clock;
max_clock = imx_data->is_ddr ? 45000000 : 150000000;