This is a note to let you know that I've just added the patch titled
usb: typec: intel_pmc_mux: Do not configure SBU and HSL Orientation
to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-linus branch.
The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.)
The patch will hopefully also be merged in Linus's tree for the next -rc kernel release.
If you have any questions about this process, please let me know.
From 7c6bbdf086ac7f1374bcf1ef0994b15109ecaf48 Mon Sep 17 00:00:00 2001
From: Utkarsh Patel utkarsh.h.patel@intel.com Date: Mon, 7 Sep 2020 17:21:52 +0300 Subject: usb: typec: intel_pmc_mux: Do not configure SBU and HSL Orientation in Alternate modes
According to the PMC Type C Subsystem (TCSS) Mux programming guide rev 0.7, bits 4 and 5 are reserved in Alternate modes. SBU Orientation and HSL Orientation needs to be configured only during initial cable detection in USB connect flow based on device property of "sbu-orientation" and "hsl-orientation". Configuring these reserved bits in the Alternate modes may result in delay in display link training or some unexpected behaviour. So do not configure them while issuing Alternate Mode requests.
Fixes: ff4a30d5e243 ("usb: typec: mux: intel_pmc_mux: Support for static SBU/HSL orientation") Signed-off-by: Utkarsh Patel utkarsh.h.patel@intel.com Cc: stable stable@vger.kernel.org Signed-off-by: Heikki Krogerus heikki.krogerus@linux.intel.com Link: https://lore.kernel.org/r/20200907142152.35678-3-heikki.krogerus@linux.intel... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/typec/mux/intel_pmc_mux.c | 8 -------- 1 file changed, 8 deletions(-)
diff --git a/drivers/usb/typec/mux/intel_pmc_mux.c b/drivers/usb/typec/mux/intel_pmc_mux.c index bb9cb4ec4d6f..ec7da0fa3cf8 100644 --- a/drivers/usb/typec/mux/intel_pmc_mux.c +++ b/drivers/usb/typec/mux/intel_pmc_mux.c @@ -61,8 +61,6 @@ enum {
#define PMC_USB_ALTMODE_ORI_SHIFT 1 #define PMC_USB_ALTMODE_UFP_SHIFT 3 -#define PMC_USB_ALTMODE_ORI_AUX_SHIFT 4 -#define PMC_USB_ALTMODE_ORI_HSL_SHIFT 5
/* DP specific Mode Data bits */ #define PMC_USB_ALTMODE_DP_MODE_SHIFT 8 @@ -178,9 +176,6 @@ pmc_usb_mux_dp(struct pmc_usb_port *port, struct typec_mux_state *state) req.mode_data = (port->orientation - 1) << PMC_USB_ALTMODE_ORI_SHIFT; req.mode_data |= (port->role - 1) << PMC_USB_ALTMODE_UFP_SHIFT;
- req.mode_data |= sbu_orientation(port) << PMC_USB_ALTMODE_ORI_AUX_SHIFT; - req.mode_data |= hsl_orientation(port) << PMC_USB_ALTMODE_ORI_HSL_SHIFT; - req.mode_data |= (state->mode - TYPEC_STATE_MODAL) << PMC_USB_ALTMODE_DP_MODE_SHIFT;
@@ -208,9 +203,6 @@ pmc_usb_mux_tbt(struct pmc_usb_port *port, struct typec_mux_state *state) req.mode_data = (port->orientation - 1) << PMC_USB_ALTMODE_ORI_SHIFT; req.mode_data |= (port->role - 1) << PMC_USB_ALTMODE_UFP_SHIFT;
- req.mode_data |= sbu_orientation(port) << PMC_USB_ALTMODE_ORI_AUX_SHIFT; - req.mode_data |= hsl_orientation(port) << PMC_USB_ALTMODE_ORI_HSL_SHIFT; - if (TBT_ADAPTER(data->device_mode) == TBT_ADAPTER_TBT3) req.mode_data |= PMC_USB_ALTMODE_TBT_TYPE;