[Public]
-----Original Message----- From: Niklas Cassel Niklas.Cassel@wdc.com Sent: Monday, September 26, 2022 13:38 To: Damien Le Moal damien.lemoal@opensource.wdc.com; Limonciello, Mario Mario.Limonciello@amd.com Cc: Niklas Cassel Niklas.Cassel@wdc.com; stable@vger.kernel.org; Jaap Berkhout j.j.berkhout@staalenberk.nl; linux-ide@vger.kernel.org Subject: [PATCH] libata: add ATA_HORKAGE_NOLPM for Pioneer BDR-207M and BDR-205
From: Niklas Cassel niklas.cassel@wdc.com
Commit 1527f69204fe ("ata: ahci: Add Green Sardine vendor ID as board_ahci_mobile") added an explicit entry for AMD Green Sardine AHCI controller using the board_ahci_mobile configuration (this configuration has later been renamed to board_ahci_low_power).
The board_ahci_low_power configuration enables support for low power modes.
This explicit entry takes precedence over the generic AHCI controller entry, which does not enable support for low power modes.
Therefore, when commit 1527f69204fe ("ata: ahci: Add Green Sardine vendor ID as board_ahci_mobile") was backported to stable kernels, it make some Pioneer optical drives, which was working perfectly fine before the commit was backported, stop working.
The real problem is that the Pioneer optical drives do not handle low power modes correctly. If these optical drives would have been tested on another AHCI controller using the board_ahci_low_power configuration, this issue would have been detected earlier.
Unfortunately, the board_ahci_low_power configuration is only used in less than 15% of the total AHCI controller entries, so many devices have never been tested with an AHCI controller with low power modes.
Fixes: 1527f69204fe ("ata: ahci: Add Green Sardine vendor ID as board_ahci_mobile") Cc: stable@vger.kernel.org Reported-by: Jaap Berkhout j.j.berkhout@staalenberk.nl Signed-off-by: Niklas Cassel niklas.cassel@wdc.com
Thanks!
Reviewed-by: Mario Limonciello mario.limonciello@amd.com
Since Damien was still intending to modify the default policy so that LPM applies everywhere I feel like more of this is going to show up. Should we consider to maybe keep all CD/DVD/BD devices excluded from LPM?
drivers/ata/libata-core.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 826d41f341e4..c9a9aa607b62 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -3988,6 +3988,10 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "PIONEER DVD-RW DVR-212D", NULL, ATA_HORKAGE_NOSETXFER }, { "PIONEER DVD-RW DVR-216D", NULL, ATA_HORKAGE_NOSETXFER },
- /* These specific Pioneer models have LPM issues */
- { "PIONEER BD-RW BDR-207M", NULL, ATA_HORKAGE_NOLPM },
- { "PIONEER BD-RW BDR-205", NULL, ATA_HORKAGE_NOLPM },
- /* Crucial BX100 SSD 500GB has broken LPM support */ { "CT500BX100SSD1", NULL, ATA_HORKAGE_NOLPM },
-- 2.37.3