5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Beleswar Padhi b-padhi@ti.com
commit 3c8a9066d584f5010b6f4ba03bf6b19d28973d52 upstream.
PSC controller has a limitation that it can only power-up the second core when the first core is in ON state. Power-state for core0 should be equal to or higher than core1.
Therefore, prevent core1 from powering up before core0 during the start process from sysfs. Similarly, prevent core0 from shutting down before core1 has been shut down from sysfs.
Fixes: 6dedbd1d5443 ("remoteproc: k3-r5: Add a remoteproc driver for R5F subsystem") Signed-off-by: Beleswar Padhi b-padhi@ti.com Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240430105307.1190615-3-b-padhi@ti.com Signed-off-by: Mathieu Poirier mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/remoteproc/ti_k3_r5_remoteproc.c | 23 +++++++++++++++++++++-- 1 file changed, 21 insertions(+), 2 deletions(-)
--- a/drivers/remoteproc/ti_k3_r5_remoteproc.c +++ b/drivers/remoteproc/ti_k3_r5_remoteproc.c @@ -429,7 +429,7 @@ static int k3_r5_rproc_start(struct rpro struct k3_r5_cluster *cluster = kproc->cluster; struct mbox_client *client = &kproc->client; struct device *dev = kproc->dev; - struct k3_r5_core *core; + struct k3_r5_core *core0, *core; u32 boot_addr; int ret;
@@ -478,6 +478,15 @@ static int k3_r5_rproc_start(struct rpro goto unroll_core_run; } } else { + /* do not allow core 1 to start before core 0 */ + core0 = list_first_entry(&cluster->cores, struct k3_r5_core, + elem); + if (core != core0 && core0->rproc->state == RPROC_OFFLINE) { + dev_err(dev, "%s: can not start core 1 before core 0\n", + __func__); + return -EPERM; + } + ret = k3_r5_core_run(core); if (ret) goto put_mbox; @@ -518,7 +527,8 @@ static int k3_r5_rproc_stop(struct rproc { struct k3_r5_rproc *kproc = rproc->priv; struct k3_r5_cluster *cluster = kproc->cluster; - struct k3_r5_core *core = kproc->core; + struct device *dev = kproc->dev; + struct k3_r5_core *core1, *core = kproc->core; int ret;
/* halt all applicable cores */ @@ -531,6 +541,15 @@ static int k3_r5_rproc_stop(struct rproc } } } else { + /* do not allow core 0 to stop before core 1 */ + core1 = list_last_entry(&cluster->cores, struct k3_r5_core, + elem); + if (core != core1 && core1->rproc->state != RPROC_OFFLINE) { + dev_err(dev, "%s: can not stop core 0 before core 1\n", + __func__); + return -EPERM; + } + ret = k3_r5_core_halt(core); if (ret) goto out;