The patch below does not apply to the 4.9-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to stable@vger.kernel.org.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From b284909abad48b07d3071a9fc9b5692b3e64914b Mon Sep 17 00:00:00 2001
From: Josh Poimboeuf jpoimboe@redhat.com Date: Wed, 30 Jan 2019 07:13:58 -0600 Subject: [PATCH] cpu/hotplug: Fix "SMT disabled by BIOS" detection for KVM
With the following commit:
73d5e2b47264 ("cpu/hotplug: detect SMT disabled by BIOS")
... the hotplug code attempted to detect when SMT was disabled by BIOS, in which case it reported SMT as permanently disabled. However, that code broke a virt hotplug scenario, where the guest is booted with only primary CPU threads, and a sibling is brought online later.
The problem is that there doesn't seem to be a way to reliably distinguish between the HW "SMT disabled by BIOS" case and the virt "sibling not yet brought online" case. So the above-mentioned commit was a bit misguided, as it permanently disabled SMT for both cases, preventing future virt sibling hotplugs.
Going back and reviewing the original problems which were attempted to be solved by that commit, when SMT was disabled in BIOS:
1) /sys/devices/system/cpu/smt/control showed "on" instead of "notsupported"; and
2) vmx_vm_init() was incorrectly showing the L1TF_MSG_SMT warning.
I'd propose that we instead consider #1 above to not actually be a problem. Because, at least in the virt case, it's possible that SMT wasn't disabled by BIOS and a sibling thread could be brought online later. So it makes sense to just always default the smt control to "on" to allow for that possibility (assuming cpuid indicates that the CPU supports SMT).
The real problem is #2, which has a simple fix: change vmx_vm_init() to query the actual current SMT state -- i.e., whether any siblings are currently online -- instead of looking at the SMT "control" sysfs value.
So fix it by:
a) reverting the original "fix" and its followup fix:
73d5e2b47264 ("cpu/hotplug: detect SMT disabled by BIOS") bc2d8d262cba ("cpu/hotplug: Fix SMT supported evaluation")
and
b) changing vmx_vm_init() to query the actual current SMT state -- instead of the sysfs control value -- to determine whether the L1TF warning is needed. This also requires the 'sched_smt_present' variable to exported, instead of 'cpu_smt_control'.
Fixes: 73d5e2b47264 ("cpu/hotplug: detect SMT disabled by BIOS") Reported-by: Igor Mammedov imammedo@redhat.com Signed-off-by: Josh Poimboeuf jpoimboe@redhat.com Signed-off-by: Thomas Gleixner tglx@linutronix.de Cc: Joe Mario jmario@redhat.com Cc: Jiri Kosina jikos@kernel.org Cc: Peter Zijlstra peterz@infradead.org Cc: kvm@vger.kernel.org Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/e3a85d585da28cc333ecbc1e78ee9216e6da9396.154879434...
diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c index 1de0f4170178..01874d54f4fd 100644 --- a/arch/x86/kernel/cpu/bugs.c +++ b/arch/x86/kernel/cpu/bugs.c @@ -71,7 +71,7 @@ void __init check_bugs(void) * identify_boot_cpu() initialized SMT support information, let the * core code know. */ - cpu_smt_check_topology_early(); + cpu_smt_check_topology();
if (!IS_ENABLED(CONFIG_SMP)) { pr_info("CPU: "); diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c index 4341175339f3..95d618045001 100644 --- a/arch/x86/kvm/vmx/vmx.c +++ b/arch/x86/kvm/vmx/vmx.c @@ -26,6 +26,7 @@ #include <linux/mod_devicetable.h> #include <linux/mm.h> #include <linux/sched.h> +#include <linux/sched/smt.h> #include <linux/slab.h> #include <linux/tboot.h> #include <linux/trace_events.h> @@ -6823,7 +6824,7 @@ static int vmx_vm_init(struct kvm *kvm) * Warn upon starting the first VM in a potentially * insecure environment. */ - if (cpu_smt_control == CPU_SMT_ENABLED) + if (sched_smt_active()) pr_warn_once(L1TF_MSG_SMT); if (l1tf_vmx_mitigation == VMENTER_L1D_FLUSH_NEVER) pr_warn_once(L1TF_MSG_L1D); diff --git a/include/linux/cpu.h b/include/linux/cpu.h index 218df7f4d3e1..5041357d0297 100644 --- a/include/linux/cpu.h +++ b/include/linux/cpu.h @@ -180,12 +180,10 @@ enum cpuhp_smt_control { #if defined(CONFIG_SMP) && defined(CONFIG_HOTPLUG_SMT) extern enum cpuhp_smt_control cpu_smt_control; extern void cpu_smt_disable(bool force); -extern void cpu_smt_check_topology_early(void); extern void cpu_smt_check_topology(void); #else # define cpu_smt_control (CPU_SMT_ENABLED) static inline void cpu_smt_disable(bool force) { } -static inline void cpu_smt_check_topology_early(void) { } static inline void cpu_smt_check_topology(void) { } #endif
diff --git a/kernel/cpu.c b/kernel/cpu.c index c0c7f64573ed..d1c6d152da89 100644 --- a/kernel/cpu.c +++ b/kernel/cpu.c @@ -376,9 +376,6 @@ void __weak arch_smt_update(void) { }
#ifdef CONFIG_HOTPLUG_SMT enum cpuhp_smt_control cpu_smt_control __read_mostly = CPU_SMT_ENABLED; -EXPORT_SYMBOL_GPL(cpu_smt_control); - -static bool cpu_smt_available __read_mostly;
void __init cpu_smt_disable(bool force) { @@ -397,25 +394,11 @@ void __init cpu_smt_disable(bool force)
/* * The decision whether SMT is supported can only be done after the full - * CPU identification. Called from architecture code before non boot CPUs - * are brought up. - */ -void __init cpu_smt_check_topology_early(void) -{ - if (!topology_smt_supported()) - cpu_smt_control = CPU_SMT_NOT_SUPPORTED; -} - -/* - * If SMT was disabled by BIOS, detect it here, after the CPUs have been - * brought online. This ensures the smt/l1tf sysfs entries are consistent - * with reality. cpu_smt_available is set to true during the bringup of non - * boot CPUs when a SMT sibling is detected. Note, this may overwrite - * cpu_smt_control's previous setting. + * CPU identification. Called from architecture code. */ void __init cpu_smt_check_topology(void) { - if (!cpu_smt_available) + if (!topology_smt_supported()) cpu_smt_control = CPU_SMT_NOT_SUPPORTED; }
@@ -428,18 +411,10 @@ early_param("nosmt", smt_cmdline_disable);
static inline bool cpu_smt_allowed(unsigned int cpu) { - if (topology_is_primary_thread(cpu)) + if (cpu_smt_control == CPU_SMT_ENABLED) return true;
- /* - * If the CPU is not a 'primary' thread and the booted_once bit is - * set then the processor has SMT support. Store this information - * for the late check of SMT support in cpu_smt_check_topology(). - */ - if (per_cpu(cpuhp_state, cpu).booted_once) - cpu_smt_available = true; - - if (cpu_smt_control == CPU_SMT_ENABLED) + if (topology_is_primary_thread(cpu)) return true;
/* diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c index 50aa2aba69bd..310d0637fe4b 100644 --- a/kernel/sched/fair.c +++ b/kernel/sched/fair.c @@ -5980,6 +5980,7 @@ static inline int find_idlest_cpu(struct sched_domain *sd, struct task_struct *p
#ifdef CONFIG_SCHED_SMT DEFINE_STATIC_KEY_FALSE(sched_smt_present); +EXPORT_SYMBOL_GPL(sched_smt_present);
static inline void set_idle_cores(int cpu, int val) { diff --git a/kernel/smp.c b/kernel/smp.c index 163c451af42e..f4cf1b0bb3b8 100644 --- a/kernel/smp.c +++ b/kernel/smp.c @@ -584,8 +584,6 @@ void __init smp_init(void) num_nodes, (num_nodes > 1 ? "s" : ""), num_cpus, (num_cpus > 1 ? "s" : ""));
- /* Final decision about SMT support */ - cpu_smt_check_topology(); /* Any cleanup work */ smp_cpus_done(setup_max_cpus); }