From: Arkadiusz Kubalewski arkadiusz.kubalewski@intel.com
[ Upstream commit 65662a8dcdd01342b71ee44234bcfd0162e195af ]
Correct the message flow between driver and firmware when disabling queues.
Previously in case of PF reset (due to required reinit after reconfig), the error like: "VSI seid 397 Tx ring 60 disable timeout" could show up occasionally. The error was not a real issue of hardware or firmware, it was caused by wrong sequence of messages invoked by the driver.
Fixes: 41c445ff0f48 ("i40e: main driver core") Signed-off-by: Aleksandr Loktionov aleksandr.loktionov@intel.com Signed-off-by: Arkadiusz Kubalewski arkadiusz.kubalewski@intel.com Tested-by: Tony Brelinski tonyx.brelinski@intel.com Signed-off-by: Tony Nguyen anthony.l.nguyen@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/intel/i40e/i40e_main.c | 58 ++++++++++++--------- 1 file changed, 34 insertions(+), 24 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index 4f4ec1f166ef..3514e36d1487 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -4403,11 +4403,10 @@ int i40e_control_wait_tx_q(int seid, struct i40e_pf *pf, int pf_q, }
/** - * i40e_vsi_control_tx - Start or stop a VSI's rings + * i40e_vsi_enable_tx - Start a VSI's rings * @vsi: the VSI being configured - * @enable: start or stop the rings **/ -static int i40e_vsi_control_tx(struct i40e_vsi *vsi, bool enable) +static int i40e_vsi_enable_tx(struct i40e_vsi *vsi) { struct i40e_pf *pf = vsi->back; int i, pf_q, ret = 0; @@ -4416,7 +4415,7 @@ static int i40e_vsi_control_tx(struct i40e_vsi *vsi, bool enable) for (i = 0; i < vsi->num_queue_pairs; i++, pf_q++) { ret = i40e_control_wait_tx_q(vsi->seid, pf, pf_q, - false /*is xdp*/, enable); + false /*is xdp*/, true); if (ret) break;
@@ -4425,7 +4424,7 @@ static int i40e_vsi_control_tx(struct i40e_vsi *vsi, bool enable)
ret = i40e_control_wait_tx_q(vsi->seid, pf, pf_q + vsi->alloc_queue_pairs, - true /*is xdp*/, enable); + true /*is xdp*/, true); if (ret) break; } @@ -4523,32 +4522,25 @@ int i40e_control_wait_rx_q(struct i40e_pf *pf, int pf_q, bool enable) }
/** - * i40e_vsi_control_rx - Start or stop a VSI's rings + * i40e_vsi_enable_rx - Start a VSI's rings * @vsi: the VSI being configured - * @enable: start or stop the rings **/ -static int i40e_vsi_control_rx(struct i40e_vsi *vsi, bool enable) +static int i40e_vsi_enable_rx(struct i40e_vsi *vsi) { struct i40e_pf *pf = vsi->back; int i, pf_q, ret = 0;
pf_q = vsi->base_queue; for (i = 0; i < vsi->num_queue_pairs; i++, pf_q++) { - ret = i40e_control_wait_rx_q(pf, pf_q, enable); + ret = i40e_control_wait_rx_q(pf, pf_q, true); if (ret) { dev_info(&pf->pdev->dev, - "VSI seid %d Rx ring %d %sable timeout\n", - vsi->seid, pf_q, (enable ? "en" : "dis")); + "VSI seid %d Rx ring %d enable timeout\n", + vsi->seid, pf_q); break; } }
- /* Due to HW errata, on Rx disable only, the register can indicate done - * before it really is. Needs 50ms to be sure - */ - if (!enable) - mdelay(50); - return ret; }
@@ -4561,29 +4553,47 @@ int i40e_vsi_start_rings(struct i40e_vsi *vsi) int ret = 0;
/* do rx first for enable and last for disable */ - ret = i40e_vsi_control_rx(vsi, true); + ret = i40e_vsi_enable_rx(vsi); if (ret) return ret; - ret = i40e_vsi_control_tx(vsi, true); + ret = i40e_vsi_enable_tx(vsi);
return ret; }
+#define I40E_DISABLE_TX_GAP_MSEC 50 + /** * i40e_vsi_stop_rings - Stop a VSI's rings * @vsi: the VSI being configured **/ void i40e_vsi_stop_rings(struct i40e_vsi *vsi) { + struct i40e_pf *pf = vsi->back; + int pf_q, err, q_end; + /* When port TX is suspended, don't wait */ if (test_bit(__I40E_PORT_SUSPENDED, vsi->back->state)) return i40e_vsi_stop_rings_no_wait(vsi);
- /* do rx first for enable and last for disable - * Ignore return value, we need to shutdown whatever we can - */ - i40e_vsi_control_tx(vsi, false); - i40e_vsi_control_rx(vsi, false); + q_end = vsi->base_queue + vsi->num_queue_pairs; + for (pf_q = vsi->base_queue; pf_q < q_end; pf_q++) + i40e_pre_tx_queue_cfg(&pf->hw, (u32)pf_q, false); + + for (pf_q = vsi->base_queue; pf_q < q_end; pf_q++) { + err = i40e_control_wait_rx_q(pf, pf_q, false); + if (err) + dev_info(&pf->pdev->dev, + "VSI seid %d Rx ring %d dissable timeout\n", + vsi->seid, pf_q); + } + + msleep(I40E_DISABLE_TX_GAP_MSEC); + pf_q = vsi->base_queue; + for (pf_q = vsi->base_queue; pf_q < q_end; pf_q++) + wr32(&pf->hw, I40E_QTX_ENA(pf_q), 0); + + i40e_vsi_wait_queues_disabled(vsi); }
/**