From: Stephane Grosjean s.grosjean@peak-system.com
In some rare conditions when running one PEAK USB-FD interface over a non high-speed USB controller, one useless USB fragment might be sent. This patch fixes the way a USB command is fragmented when its length is greater than 64 bytes and when the underlying USB controller is not a high-speed one.
Signed-off-by: Stephane Grosjean s.grosjean@peak-system.com Cc: linux-stable stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde mkl@pengutronix.de --- drivers/net/can/usb/peak_usb/pcan_usb_fd.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-)
diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_fd.c b/drivers/net/can/usb/peak_usb/pcan_usb_fd.c index 7ccdc3e30c98..53d6bb045e9e 100644 --- a/drivers/net/can/usb/peak_usb/pcan_usb_fd.c +++ b/drivers/net/can/usb/peak_usb/pcan_usb_fd.c @@ -184,7 +184,7 @@ static int pcan_usb_fd_send_cmd(struct peak_usb_device *dev, void *cmd_tail) void *cmd_head = pcan_usb_fd_cmd_buffer(dev); int err = 0; u8 *packet_ptr; - int i, n = 1, packet_len; + int packet_len; ptrdiff_t cmd_len;
/* usb device unregistered? */ @@ -201,17 +201,13 @@ static int pcan_usb_fd_send_cmd(struct peak_usb_device *dev, void *cmd_tail) }
packet_ptr = cmd_head; + packet_len = cmd_len;
/* firmware is not able to re-assemble 512 bytes buffer in full-speed */ - if ((dev->udev->speed != USB_SPEED_HIGH) && - (cmd_len > PCAN_UFD_LOSPD_PKT_SIZE)) { - packet_len = PCAN_UFD_LOSPD_PKT_SIZE; - n += cmd_len / packet_len; - } else { - packet_len = cmd_len; - } + if (unlikely(dev->udev->speed != USB_SPEED_HIGH)) + packet_len = min(packet_len, PCAN_UFD_LOSPD_PKT_SIZE);
- for (i = 0; i < n; i++) { + do { err = usb_bulk_msg(dev->udev, usb_sndbulkpipe(dev->udev, PCAN_USBPRO_EP_CMDOUT), @@ -224,7 +220,12 @@ static int pcan_usb_fd_send_cmd(struct peak_usb_device *dev, void *cmd_tail) }
packet_ptr += packet_len; - } + cmd_len -= packet_len; + + if (cmd_len < PCAN_UFD_LOSPD_PKT_SIZE) + packet_len = cmd_len; + + } while (packet_len > 0);
return err; }