The following commit has been merged into the irq/urgent branch of tip:
Commit-ID: a9c3ee5d0fdb069b54902300df6ac822027f3b0a Gitweb: https://git.kernel.org/tip/a9c3ee5d0fdb069b54902300df6ac822027f3b0a Author: Huacai Chen chenhuacai@loongson.cn AuthorDate: Sat, 22 Jun 2024 12:33:38 +08:00 Committer: Thomas Gleixner tglx@linutronix.de CommitterDate: Sun, 23 Jun 2024 17:09:26 +02:00
irqchip/loongson-liointc: Set different ISRs for different cores
The liointc hardware provides separate Interrupt Status Registers (ISR) for each core. The current code uses always the ISR of core #0, which works during boot because by default all interrupts are routed to core #0.
When the interrupt routing changes in the firmware configuration then this causes interrupts to be lost because they are not configured in the corresponding core.
Use the core index to access the correct ISR instead of a hardcoded 0.
[ tglx: Massaged changelog ]
Fixes: 0858ed035a85 ("irqchip/loongson-liointc: Add ACPI init support") Co-developed-by: Tianli Xiong xiongtianli@loongson.cn Signed-off-by: Tianli Xiong xiongtianli@loongson.cn Signed-off-by: Huacai Chen chenhuacai@loongson.cn Signed-off-by: Thomas Gleixner tglx@linutronix.de Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240622043338.1566945-1-chenhuacai@loongson.cn
--- drivers/irqchip/irq-loongson-liointc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/irqchip/irq-loongson-liointc.c b/drivers/irqchip/irq-loongson-liointc.c index e4b33ae..7c4fe7a 100644 --- a/drivers/irqchip/irq-loongson-liointc.c +++ b/drivers/irqchip/irq-loongson-liointc.c @@ -28,7 +28,7 @@
#define LIOINTC_INTC_CHIP_START 0x20
-#define LIOINTC_REG_INTC_STATUS (LIOINTC_INTC_CHIP_START + 0x20) +#define LIOINTC_REG_INTC_STATUS(core) (LIOINTC_INTC_CHIP_START + 0x20 + (core) * 8) #define LIOINTC_REG_INTC_EN_STATUS (LIOINTC_INTC_CHIP_START + 0x04) #define LIOINTC_REG_INTC_ENABLE (LIOINTC_INTC_CHIP_START + 0x08) #define LIOINTC_REG_INTC_DISABLE (LIOINTC_INTC_CHIP_START + 0x0c) @@ -217,7 +217,7 @@ static int liointc_init(phys_addr_t addr, unsigned long size, int revision, goto out_free_priv;
for (i = 0; i < LIOINTC_NUM_CORES; i++) - priv->core_isr[i] = base + LIOINTC_REG_INTC_STATUS; + priv->core_isr[i] = base + LIOINTC_REG_INTC_STATUS(i);
for (i = 0; i < LIOINTC_NUM_PARENT; i++) priv->handler[i].parent_int_map = parent_int_map[i];