From: Stefan Roese sr@denx.de
[ Upstream commit 8795e182b02dc87e343c79e73af6b8b7f9c5e635 ]
AER reporting is currently disabled in the DevCtl registers of all non Root Port PCIe devices on systems using pcie_ports_native || host->native_aer, disabling AER completely in such systems. This is because 2bd50dd800b5 ("PCI: PCIe: Disable PCIe port services during port initialization"), added a call to pci_disable_pcie_error_reporting() *after* the AER setup was completed for the PCIe device tree.
Here a longer analysis about the current status of AER enabling / disabling upon bootup provided by Bjorn:
pcie_portdrv_probe pcie_port_device_register get_port_device_capability pci_disable_pcie_error_reporting clear CERE NFERE FERE URRE # <-- disable for RP USP DSP pcie_device_init device_register # new AER service device aer_probe aer_enable_rootport # RP only set_downstream_devices_error_reporting set_device_error_reporting # self (RP) if (RP || USP || DSP) pci_enable_pcie_error_reporting set CERE NFERE FERE URRE # <-- enable for RP pci_walk_bus set_device_error_reporting if (RP || USP || DSP) pci_enable_pcie_error_reporting set CERE NFERE FERE URRE # <-- enable for USP DSP
In a typical Root Port -> Endpoint hierarchy, the above: - Disables Error Reporting for the Root Port, - Enables Error Reporting for the Root Port, - Does NOT enable Error Reporting for the Endpoint because it is not a Root Port or Switch Port.
In a deeper Root Port -> Upstream Switch Port -> Downstream Switch Port -> Endpoint hierarchy: - Disables Error Reporting for the Root Port, - Enables Error Reporting for the Root Port, - Enables Error Reporting for both Switch Ports, - Does NOT enable Error Reporting for the Endpoint because it is not a Root Port or Switch Port, - Disables Error Reporting for the Switch Ports when pcie_portdrv_probe() claims them. AER does not re-enable it because these are not Root Ports.
Remove this call to pci_disable_pcie_error_reporting() from get_port_device_capability(), leaving the already enabled AER configuration intact. With this change, AER is enabled in the Root Port and the PCIe switch upstream and downstream ports. Only the PCIe Endpoints don't have AER enabled yet. A follow-up patch will take care of this Endpoint enabling.
Fixes: 2bd50dd800b5 ("PCI: PCIe: Disable PCIe port services during port initialization") Link: https://lore.kernel.org/r/20220125071820.2247260-3-sr@denx.de Signed-off-by: Stefan Roese sr@denx.de Signed-off-by: Bjorn Helgaas bhelgaas@google.com Reviewed-by: Pali Rohár pali@kernel.org Cc: Rafael J. Wysocki rjw@rjwysocki.net Cc: Bharat Kumar Gogada bharat.kumar.gogada@xilinx.com Cc: Michal Simek michal.simek@xilinx.com Cc: Yao Hongbo yaohongbo@linux.alibaba.com Cc: Naveen Naidu naveennaidu479@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/pcie/portdrv_core.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-)
diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c index 604feeb84ee4..1ac7fec47d6f 100644 --- a/drivers/pci/pcie/portdrv_core.c +++ b/drivers/pci/pcie/portdrv_core.c @@ -222,15 +222,8 @@ static int get_port_device_capability(struct pci_dev *dev)
#ifdef CONFIG_PCIEAER if (dev->aer_cap && pci_aer_available() && - (pcie_ports_native || host->native_aer)) { + (pcie_ports_native || host->native_aer)) services |= PCIE_PORT_SERVICE_AER; - - /* - * Disable AER on this port in case it's been enabled by the - * BIOS (the AER service driver will enable it when necessary). - */ - pci_disable_pcie_error_reporting(dev); - } #endif
/* Root Ports and Root Complex Event Collectors may generate PMEs */