6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Huacai Chen chenhuacai@loongson.cn
commit a9c3ee5d0fdb069b54902300df6ac822027f3b0a upstream.
The liointc hardware provides separate Interrupt Status Registers (ISR) for each core. The current code uses always the ISR of core #0, which works during boot because by default all interrupts are routed to core #0.
When the interrupt routing changes in the firmware configuration then this causes interrupts to be lost because they are not configured in the corresponding core.
Use the core index to access the correct ISR instead of a hardcoded 0.
[ tglx: Massaged changelog ]
Fixes: 0858ed035a85 ("irqchip/loongson-liointc: Add ACPI init support") Co-developed-by: Tianli Xiong xiongtianli@loongson.cn Signed-off-by: Tianli Xiong xiongtianli@loongson.cn Signed-off-by: Huacai Chen chenhuacai@loongson.cn Signed-off-by: Thomas Gleixner tglx@linutronix.de Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240622043338.1566945-1-chenhuacai@loongson.cn Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/irqchip/irq-loongson-liointc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/irqchip/irq-loongson-liointc.c +++ b/drivers/irqchip/irq-loongson-liointc.c @@ -28,7 +28,7 @@
#define LIOINTC_INTC_CHIP_START 0x20
-#define LIOINTC_REG_INTC_STATUS (LIOINTC_INTC_CHIP_START + 0x20) +#define LIOINTC_REG_INTC_STATUS(core) (LIOINTC_INTC_CHIP_START + 0x20 + (core) * 8) #define LIOINTC_REG_INTC_EN_STATUS (LIOINTC_INTC_CHIP_START + 0x04) #define LIOINTC_REG_INTC_ENABLE (LIOINTC_INTC_CHIP_START + 0x08) #define LIOINTC_REG_INTC_DISABLE (LIOINTC_INTC_CHIP_START + 0x0c) @@ -217,7 +217,7 @@ static int liointc_init(phys_addr_t addr goto out_free_priv;
for (i = 0; i < LIOINTC_NUM_CORES; i++) - priv->core_isr[i] = base + LIOINTC_REG_INTC_STATUS; + priv->core_isr[i] = base + LIOINTC_REG_INTC_STATUS(i);
for (i = 0; i < LIOINTC_NUM_PARENT; i++) priv->handler[i].parent_int_map = parent_int_map[i];