6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lino Sanfilippo l.sanfilippo@kunbus.com
commit 51f93776b84dee23e44a7be880736669a01cec2b upstream.
The drivers RS485 support is deactivated if there is no RTS GPIO available. This is done by nullifying the ports rs485_supported struct. After that however the settings in serial_omap_rs485_supported are assigned to the same structure unconditionally, which results in an unintended reactivation of RS485 support.
Fix this by moving the assignment to the beginning of serial_omap_probe_rs485() and thus before uart_get_rs485_mode() gets called.
Also replace the assignment of rs485_config() to have the complete RS485 setup in one function.
Fixes: e2752ae3cfc9 ("serial: omap: Disallow RS-485 if rts-gpio is not specified") Cc: stable@vger.kernel.org Signed-off-by: Lino Sanfilippo l.sanfilippo@kunbus.com Reviewed-by: Ilpo Järvinen ilpo.jarvinen@linux.intel.com Link: https://lore.kernel.org/r/20240103061818.564-7-l.sanfilippo@kunbus.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/tty/serial/omap-serial.c | 27 ++++++++++++++------------- 1 file changed, 14 insertions(+), 13 deletions(-)
--- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -1483,6 +1483,13 @@ static struct omap_uart_port_info *of_ge return omap_up_info; }
+static const struct serial_rs485 serial_omap_rs485_supported = { + .flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | SER_RS485_RTS_AFTER_SEND | + SER_RS485_RX_DURING_TX, + .delay_rts_before_send = 1, + .delay_rts_after_send = 1, +}; + static int serial_omap_probe_rs485(struct uart_omap_port *up, struct device *dev) { @@ -1497,6 +1504,9 @@ static int serial_omap_probe_rs485(struc if (!np) return 0;
+ up->port.rs485_config = serial_omap_config_rs485; + up->port.rs485_supported = serial_omap_rs485_supported; + ret = uart_get_rs485_mode(&up->port); if (ret) return ret; @@ -1531,13 +1541,6 @@ static int serial_omap_probe_rs485(struc return 0; }
-static const struct serial_rs485 serial_omap_rs485_supported = { - .flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | SER_RS485_RTS_AFTER_SEND | - SER_RS485_RX_DURING_TX, - .delay_rts_before_send = 1, - .delay_rts_after_send = 1, -}; - static int serial_omap_probe(struct platform_device *pdev) { struct omap_uart_port_info *omap_up_info = dev_get_platdata(&pdev->dev); @@ -1604,17 +1607,11 @@ static int serial_omap_probe(struct plat dev_info(up->port.dev, "no wakeirq for uart%d\n", up->port.line);
- ret = serial_omap_probe_rs485(up, &pdev->dev); - if (ret < 0) - goto err_rs485; - sprintf(up->name, "OMAP UART%d", up->port.line); up->port.mapbase = mem->start; up->port.membase = base; up->port.flags = omap_up_info->flags; up->port.uartclk = omap_up_info->uartclk; - up->port.rs485_config = serial_omap_config_rs485; - up->port.rs485_supported = serial_omap_rs485_supported; if (!up->port.uartclk) { up->port.uartclk = DEFAULT_CLK_SPEED; dev_warn(&pdev->dev, @@ -1622,6 +1619,10 @@ static int serial_omap_probe(struct plat DEFAULT_CLK_SPEED); }
+ ret = serial_omap_probe_rs485(up, &pdev->dev); + if (ret < 0) + goto err_rs485; + up->latency = PM_QOS_CPU_LATENCY_DEFAULT_VALUE; up->calc_latency = PM_QOS_CPU_LATENCY_DEFAULT_VALUE; cpu_latency_qos_add_request(&up->pm_qos_request, up->latency);