From: Hayes Wang hayeswang@realtek.com
[ Upstream commit b24edca309535c2d9af86aab95d64065f6ef1d26 ]
There are some chances that the actual base of hardware is different from the value recorded by driver, so we have to reset the variable of ocp_base to sync it.
Set ocp_base to -1. Then, it would be updated and the new base would be set to the hardware next time.
Signed-off-by: Hayes Wang hayeswang@realtek.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/usb/r8152.c | 26 ++++++++++++++++++++++---- 1 file changed, 22 insertions(+), 4 deletions(-)
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index d3da350777a4d..6c4c9b7324fcc 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -32,7 +32,7 @@ #define NETNEXT_VERSION "12"
/* Information for net */ -#define NET_VERSION "11" +#define NET_VERSION "12"
#define DRIVER_VERSION "v1." NETNEXT_VERSION "." NET_VERSION #define DRIVER_AUTHOR "Realtek linux nic maintainers nic_swsd@realtek.com" @@ -4016,6 +4016,11 @@ static void rtl_clear_bp(struct r8152 *tp, u16 type) ocp_write_word(tp, type, PLA_BP_BA, 0); }
+static inline void rtl_reset_ocp_base(struct r8152 *tp) +{ + tp->ocp_base = -1; +} + static int rtl_phy_patch_request(struct r8152 *tp, bool request, bool wait) { u16 data, check; @@ -4087,8 +4092,6 @@ static int rtl_post_ram_code(struct r8152 *tp, u16 key_addr, bool wait)
rtl_phy_patch_request(tp, false, wait);
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_OCP_GPHY_BASE, tp->ocp_base); - return 0; }
@@ -4800,6 +4803,8 @@ static void rtl_ram_code_speed_up(struct r8152 *tp, struct fw_phy_speed_up *phy, u32 len; u8 *data;
+ rtl_reset_ocp_base(tp); + if (sram_read(tp, SRAM_GPHY_FW_VER) >= __le16_to_cpu(phy->version)) { dev_dbg(&tp->intf->dev, "PHY firmware has been the newest\n"); return; @@ -4845,7 +4850,8 @@ static void rtl_ram_code_speed_up(struct r8152 *tp, struct fw_phy_speed_up *phy, } }
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_OCP_GPHY_BASE, tp->ocp_base); + rtl_reset_ocp_base(tp); + rtl_phy_patch_request(tp, false, wait);
if (sram_read(tp, SRAM_GPHY_FW_VER) == __le16_to_cpu(phy->version)) @@ -4861,6 +4867,8 @@ static int rtl8152_fw_phy_ver(struct r8152 *tp, struct fw_phy_ver *phy_ver) ver_addr = __le16_to_cpu(phy_ver->ver.addr); ver = __le16_to_cpu(phy_ver->ver.data);
+ rtl_reset_ocp_base(tp); + if (sram_read(tp, ver_addr) >= ver) { dev_dbg(&tp->intf->dev, "PHY firmware has been the newest\n"); return 0; @@ -4877,6 +4885,8 @@ static void rtl8152_fw_phy_fixup(struct r8152 *tp, struct fw_phy_fixup *fix) { u16 addr, data;
+ rtl_reset_ocp_base(tp); + addr = __le16_to_cpu(fix->setting.addr); data = ocp_reg_read(tp, addr);
@@ -4908,6 +4918,8 @@ static void rtl8152_fw_phy_union_apply(struct r8152 *tp, struct fw_phy_union *ph u32 length; int i, num;
+ rtl_reset_ocp_base(tp); + num = phy->pre_num; for (i = 0; i < num; i++) sram_write(tp, __le16_to_cpu(phy->pre_set[i].addr), @@ -4938,6 +4950,8 @@ static void rtl8152_fw_phy_nc_apply(struct r8152 *tp, struct fw_phy_nc *phy) u32 length, i, num; __le16 *data;
+ rtl_reset_ocp_base(tp); + mode_reg = __le16_to_cpu(phy->mode_reg); sram_write(tp, mode_reg, __le16_to_cpu(phy->mode_pre)); sram_write(tp, __le16_to_cpu(phy->ba_reg), @@ -5107,6 +5121,7 @@ static void rtl8152_apply_firmware(struct r8152 *tp, bool power_cut) if (rtl_fw->post_fw) rtl_fw->post_fw(tp);
+ rtl_reset_ocp_base(tp); strscpy(rtl_fw->version, fw_hdr->version, RTL_VER_SIZE); dev_info(&tp->intf->dev, "load %s successfully\n", rtl_fw->version); } @@ -8467,6 +8482,8 @@ static int rtl8152_resume(struct usb_interface *intf)
mutex_lock(&tp->control);
+ rtl_reset_ocp_base(tp); + if (test_bit(SELECTIVE_SUSPEND, &tp->flags)) ret = rtl8152_runtime_resume(tp); else @@ -8482,6 +8499,7 @@ static int rtl8152_reset_resume(struct usb_interface *intf) struct r8152 *tp = usb_get_intfdata(intf);
clear_bit(SELECTIVE_SUSPEND, &tp->flags); + rtl_reset_ocp_base(tp); tp->rtl_ops.init(tp); queue_delayed_work(system_long_wq, &tp->hw_phy_work, 0); set_ethernet_addr(tp, true);