6.11-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit 6668610b4d8ce9a3ee3ed61a9471f62fb5f05bf9 ]
Some old Bay Trail tablets which shipped with Android as factory OS have the SST/LPE audio engine described by an ACPI device with a HID (Hardware-ID) of LPE0F28 instead of 80860F28.
Add support for this. Note this uses a new sst_res_info for just the LPE0F28 case because it has a different layout for the IO-mem ACPI resources then the 80860F28.
An example of a tablet which needs this is the Vexia EDU ATLA 10 tablet, which has been distributed to schools in the Spanish Andalucía region.
Signed-off-by: Hans de Goede hdegoede@redhat.com Link: https://patch.msgid.link/20241025090221.52198-1-hdegoede@redhat.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/hda/intel-dsp-config.c | 4 ++ sound/soc/intel/atom/sst/sst_acpi.c | 64 +++++++++++++++++++++++++---- 2 files changed, 59 insertions(+), 9 deletions(-)
diff --git a/sound/hda/intel-dsp-config.c b/sound/hda/intel-dsp-config.c index 913880b090657..ee4157992f6bf 100644 --- a/sound/hda/intel-dsp-config.c +++ b/sound/hda/intel-dsp-config.c @@ -732,6 +732,10 @@ static const struct config_entry acpi_config_table[] = { #if IS_ENABLED(CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_ACPI) || \ IS_ENABLED(CONFIG_SND_SOC_SOF_BAYTRAIL) /* BayTrail */ + { + .flags = FLAG_SST_OR_SOF_BYT, + .acpi_hid = "LPE0F28", + }, { .flags = FLAG_SST_OR_SOF_BYT, .acpi_hid = "80860F28", diff --git a/sound/soc/intel/atom/sst/sst_acpi.c b/sound/soc/intel/atom/sst/sst_acpi.c index 29d44c989e5fc..1f9bb1b84949d 100644 --- a/sound/soc/intel/atom/sst/sst_acpi.c +++ b/sound/soc/intel/atom/sst/sst_acpi.c @@ -125,6 +125,28 @@ static const struct sst_res_info bytcr_res_info = { .acpi_ipc_irq_index = 0 };
+/* For "LPE0F28" ACPI device found on some Android factory OS models */ +static const struct sst_res_info lpe8086_res_info = { + .shim_offset = 0x140000, + .shim_size = 0x000100, + .shim_phy_addr = SST_BYT_SHIM_PHY_ADDR, + .ssp0_offset = 0xa0000, + .ssp0_size = 0x1000, + .dma0_offset = 0x98000, + .dma0_size = 0x4000, + .dma1_offset = 0x9c000, + .dma1_size = 0x4000, + .iram_offset = 0x0c0000, + .iram_size = 0x14000, + .dram_offset = 0x100000, + .dram_size = 0x28000, + .mbox_offset = 0x144000, + .mbox_size = 0x1000, + .acpi_lpe_res_index = 1, + .acpi_ddr_index = 0, + .acpi_ipc_irq_index = 0 +}; + static struct sst_platform_info byt_rvp_platform_data = { .probe_data = &byt_fwparse_info, .ipc_info = &byt_ipc_info, @@ -268,10 +290,38 @@ static int sst_acpi_probe(struct platform_device *pdev) mach->pdata = &chv_platform_data; pdata = mach->pdata;
- ret = kstrtouint(id->id, 16, &dev_id); - if (ret < 0) { - dev_err(dev, "Unique device id conversion error: %d\n", ret); - return ret; + if (!strcmp(id->id, "LPE0F28")) { + struct resource *rsrc; + + /* Use regular BYT SST PCI VID:PID */ + dev_id = 0x80860F28; + byt_rvp_platform_data.res_info = &lpe8086_res_info; + + /* + * The "LPE0F28" ACPI device has separate IO-mem resources for: + * DDR, SHIM, MBOX, IRAM, DRAM, CFG + * None of which covers the entire LPE base address range. + * lpe8086_res_info.acpi_lpe_res_index points to the SHIM. + * Patch this to cover the entire base address range as expected + * by sst_platform_get_resources(). + */ + rsrc = platform_get_resource(pdev, IORESOURCE_MEM, + pdata->res_info->acpi_lpe_res_index); + if (!rsrc) { + dev_err(ctx->dev, "Invalid SHIM base\n"); + return -EIO; + } + rsrc->start -= pdata->res_info->shim_offset; + rsrc->end = rsrc->start + 0x200000 - 1; + } else { + ret = kstrtouint(id->id, 16, &dev_id); + if (ret < 0) { + dev_err(dev, "Unique device id conversion error: %d\n", ret); + return ret; + } + + if (soc_intel_is_byt_cr(pdev)) + byt_rvp_platform_data.res_info = &bytcr_res_info; }
dev_dbg(dev, "ACPI device id: %x\n", dev_id); @@ -280,11 +330,6 @@ static int sst_acpi_probe(struct platform_device *pdev) if (ret < 0) return ret;
- if (soc_intel_is_byt_cr(pdev)) { - /* override resource info */ - byt_rvp_platform_data.res_info = &bytcr_res_info; - } - /* update machine parameters */ mach->mach_params.acpi_ipc_irq_index = pdata->res_info->acpi_ipc_irq_index; @@ -344,6 +389,7 @@ static void sst_acpi_remove(struct platform_device *pdev) }
static const struct acpi_device_id sst_acpi_ids[] = { + { "LPE0F28", (unsigned long)&snd_soc_acpi_intel_baytrail_machines}, { "80860F28", (unsigned long)&snd_soc_acpi_intel_baytrail_machines}, { "808622A8", (unsigned long)&snd_soc_acpi_intel_cherrytrail_machines}, { },