6.12-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andy Shevchenko andriy.shevchenko@linux.intel.com
[ Upstream commit 0a7404fc5399e1100b14e7e2a4af2e4fd5e3b602 ]
There are two registers in the hardware, one, "Select PWM", is per-port configuration enabling PWM function instead of GPIO. The other one is "PWM Select" is per-PWM selector to configure PWM itself. Original code uses abbreviation of the latter to describe the former. Rename it to follow the datasheet.
Fixes: e6cbbe42944d ("pinctrl: Add Cypress cy8c95x0 support") Signed-off-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Link: https://lore.kernel.org/20250203131506.3318201-5-andriy.shevchenko@linux.int... Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pinctrl/pinctrl-cy8c95x0.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/pinctrl/pinctrl-cy8c95x0.c b/drivers/pinctrl/pinctrl-cy8c95x0.c index c0f094f51da84..8e65797192abc 100644 --- a/drivers/pinctrl/pinctrl-cy8c95x0.c +++ b/drivers/pinctrl/pinctrl-cy8c95x0.c @@ -42,7 +42,7 @@ #define CY8C95X0_PORTSEL 0x18 /* Port settings, write PORTSEL first */ #define CY8C95X0_INTMASK 0x19 -#define CY8C95X0_PWMSEL 0x1A +#define CY8C95X0_SELPWM 0x1A #define CY8C95X0_INVERT 0x1B #define CY8C95X0_DIRECTION 0x1C /* Drive mode register change state on writing '1' */ @@ -371,8 +371,8 @@ static bool cy8c95x0_volatile_register(struct device *dev, unsigned int reg) case CY8C95X0_INPUT_(0) ... CY8C95X0_INPUT_(7): case CY8C95X0_INTSTATUS_(0) ... CY8C95X0_INTSTATUS_(7): case CY8C95X0_INTMASK: + case CY8C95X0_SELPWM: case CY8C95X0_INVERT: - case CY8C95X0_PWMSEL: case CY8C95X0_DIRECTION: case CY8C95X0_DRV_PU: case CY8C95X0_DRV_PD: @@ -401,7 +401,7 @@ static bool cy8c95x0_muxed_register(unsigned int reg) { switch (reg) { case CY8C95X0_INTMASK: - case CY8C95X0_PWMSEL: + case CY8C95X0_SELPWM: case CY8C95X0_INVERT: case CY8C95X0_DIRECTION: case CY8C95X0_DRV_PU: @@ -807,7 +807,7 @@ static int cy8c95x0_gpio_get_pincfg(struct cy8c95x0_pinctrl *chip, reg = CY8C95X0_DIRECTION; break; case PIN_CONFIG_MODE_PWM: - reg = CY8C95X0_PWMSEL; + reg = CY8C95X0_SELPWM; break; case PIN_CONFIG_OUTPUT: reg = CY8C95X0_OUTPUT; @@ -889,7 +889,7 @@ static int cy8c95x0_gpio_set_pincfg(struct cy8c95x0_pinctrl *chip, reg = CY8C95X0_DRV_PP_FAST; break; case PIN_CONFIG_MODE_PWM: - reg = CY8C95X0_PWMSEL; + reg = CY8C95X0_SELPWM; break; case PIN_CONFIG_OUTPUT_ENABLE: ret = cy8c95x0_pinmux_direction(chip, off, !arg); @@ -1179,7 +1179,7 @@ static void cy8c95x0_pin_dbg_show(struct pinctrl_dev *pctldev, struct seq_file * bitmap_zero(mask, MAX_LINE); __set_bit(pin, mask);
- if (cy8c95x0_read_regs_mask(chip, CY8C95X0_PWMSEL, pwm, mask)) { + if (cy8c95x0_read_regs_mask(chip, CY8C95X0_SELPWM, pwm, mask)) { seq_puts(s, "not available"); return; } @@ -1224,7 +1224,7 @@ static int cy8c95x0_set_mode(struct cy8c95x0_pinctrl *chip, unsigned int off, bo u8 port = cypress_get_port(chip, off); u8 bit = cypress_get_pin_mask(chip, off);
- return cy8c95x0_regmap_write_bits(chip, CY8C95X0_PWMSEL, port, bit, mode ? bit : 0); + return cy8c95x0_regmap_write_bits(chip, CY8C95X0_SELPWM, port, bit, mode ? bit : 0); }
static int cy8c95x0_pinmux_mode(struct cy8c95x0_pinctrl *chip,