From: Christian Eggers ceggers@arri.de
commit 384a9565f70a876c2e78e58c5ca0bbf0547e4f6d upstream.
According to the "VFxxx Controller Reference Manual" (and the comment block starting at line 97), Vybrid requires writing a one for clearing an interrupt flag. Syncing the method for clearing I2SR_IIF in i2c_imx_isr().
Signed-off-by: Christian Eggers ceggers@arri.de Fixes: 4b775022f6fd ("i2c: imx: add struct to hold more configurable quirks") Reviewed-by: Uwe Kleine-König u.kleine-koenig@pengutronix.de Acked-by: Oleksij Rempel o.rempel@pengutronix.de Cc: stable@vger.kernel.org Signed-off-by: Wolfram Sang wsa@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/i2c/busses/i2c-imx.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-)
--- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -413,6 +413,19 @@ static void i2c_imx_dma_free(struct imx_ dma->chan_using = NULL; }
+static void i2c_imx_clear_irq(struct imx_i2c_struct *i2c_imx, unsigned int bits) +{ + unsigned int temp; + + /* + * i2sr_clr_opcode is the value to clear all interrupts. Here we want to + * clear only <bits>, so we write ~i2sr_clr_opcode with just <bits> + * toggled. This is required because i.MX needs W0C and Vybrid uses W1C. + */ + temp = ~i2c_imx->hwdata->i2sr_clr_opcode ^ bits; + imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR); +} + static int i2c_imx_bus_busy(struct imx_i2c_struct *i2c_imx, int for_busy) { unsigned long orig_jiffies = jiffies; @@ -425,8 +438,7 @@ static int i2c_imx_bus_busy(struct imx_i
/* check for arbitration lost */ if (temp & I2SR_IAL) { - temp &= ~I2SR_IAL; - imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR); + i2c_imx_clear_irq(i2c_imx, I2SR_IAL); return -EAGAIN; }
@@ -595,9 +607,7 @@ static irqreturn_t i2c_imx_isr(int irq, if (temp & I2SR_IIF) { /* save status register */ i2c_imx->i2csr = temp; - temp &= ~I2SR_IIF; - temp |= (i2c_imx->hwdata->i2sr_clr_opcode & I2SR_IIF); - imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR); + i2c_imx_clear_irq(i2c_imx, I2SR_IIF); wake_up(&i2c_imx->queue); return IRQ_HANDLED; }