From: Cezary Rojewski cezary.rojewski@intel.com
[ Upstream commit 6d41bbf2fd3615c56dbf2b67f6cbf9e83d14a2e2 ]
Contrary to what is said in board's file, topology targeting kbl_da7219_max98373 expects format 16b, not 24/32b. Partially revert changes added in 'ASoC: Intel: Boards: Add Maxim98373 support' to bring old behavior back, aligning with topology expectations.
Fixes: 716d53cc7837 ("ASoC: Intel: Boards: Add Maxim98373 support") Signed-off-by: Cezary Rojewski cezary.rojewski@intel.com Tested-by: Lukasz Majczak lma@semihalf.com Link: https://lore.kernel.org/r/20210818075742.1515155-2-cezary.rojewski@intel.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/intel/boards/kbl_da7219_max98927.c | 55 +++----------------- 1 file changed, 7 insertions(+), 48 deletions(-)
diff --git a/sound/soc/intel/boards/kbl_da7219_max98927.c b/sound/soc/intel/boards/kbl_da7219_max98927.c index a31a7a7bbf66..2b43459adc33 100644 --- a/sound/soc/intel/boards/kbl_da7219_max98927.c +++ b/sound/soc/intel/boards/kbl_da7219_max98927.c @@ -199,7 +199,7 @@ static int kabylake_ssp0_hw_params(struct snd_pcm_substream *substream, } if (!strcmp(codec_dai->component->name, MAX98373_DEV0_NAME)) { ret = snd_soc_dai_set_tdm_slot(codec_dai, - 0x03, 3, 8, 24); + 0x30, 3, 8, 16); if (ret < 0) { dev_err(runtime->dev, "DEV0 TDM slot err:%d\n", ret); @@ -208,10 +208,10 @@ static int kabylake_ssp0_hw_params(struct snd_pcm_substream *substream, } if (!strcmp(codec_dai->component->name, MAX98373_DEV1_NAME)) { ret = snd_soc_dai_set_tdm_slot(codec_dai, - 0x0C, 3, 8, 24); + 0xC0, 3, 8, 16); if (ret < 0) { dev_err(runtime->dev, - "DEV0 TDM slot err:%d\n", ret); + "DEV1 TDM slot err:%d\n", ret); return ret; } } @@ -311,24 +311,6 @@ static int kabylake_ssp_fixup(struct snd_soc_pcm_runtime *rtd, * The above 2 loops are mutually exclusive based on the stream direction, * thus rtd_dpcm variable will never be overwritten */ - /* - * Topology for kblda7219m98373 & kblmax98373 supports only S24_LE, - * where as kblda7219m98927 & kblmax98927 supports S16_LE by default. - * Skipping the port wise FE and BE configuration for kblda7219m98373 & - * kblmax98373 as the topology (FE & BE) supports S24_LE only. - */ - - if (!strcmp(rtd->card->name, "kblda7219m98373") || - !strcmp(rtd->card->name, "kblmax98373")) { - /* The ADSP will convert the FE rate to 48k, stereo */ - rate->min = rate->max = 48000; - chan->min = chan->max = DUAL_CHANNEL; - - /* set SSP to 24 bit */ - snd_mask_none(fmt); - snd_mask_set_format(fmt, SNDRV_PCM_FORMAT_S24_LE); - return 0; - }
/* * The ADSP will convert the FE rate to 48k, stereo, 24 bit @@ -479,31 +461,20 @@ static struct snd_pcm_hw_constraint_list constraints_channels_quad = { static int kbl_fe_startup(struct snd_pcm_substream *substream) { struct snd_pcm_runtime *runtime = substream->runtime; - struct snd_soc_pcm_runtime *soc_rt = asoc_substream_to_rtd(substream);
/* * On this platform for PCM device we support, * 48Khz * stereo + * 16 bit audio */
runtime->hw.channels_max = DUAL_CHANNEL; snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_CHANNELS, &constraints_channels); - /* - * Setup S24_LE (32 bit container and 24 bit valid data) for - * kblda7219m98373 & kblmax98373. For kblda7219m98927 & - * kblmax98927 keeping it as 16/16 due to topology FW dependency. - */ - if (!strcmp(soc_rt->card->name, "kblda7219m98373") || - !strcmp(soc_rt->card->name, "kblmax98373")) { - runtime->hw.formats = SNDRV_PCM_FMTBIT_S24_LE; - snd_pcm_hw_constraint_msbits(runtime, 0, 32, 24); - - } else { - runtime->hw.formats = SNDRV_PCM_FMTBIT_S16_LE; - snd_pcm_hw_constraint_msbits(runtime, 0, 16, 16); - } + + runtime->hw.formats = SNDRV_PCM_FMTBIT_S16_LE; + snd_pcm_hw_constraint_msbits(runtime, 0, 16, 16);
snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_RATE, &constraints_rates); @@ -536,23 +507,11 @@ static int kabylake_dmic_fixup(struct snd_soc_pcm_runtime *rtd, static int kabylake_dmic_startup(struct snd_pcm_substream *substream) { struct snd_pcm_runtime *runtime = substream->runtime; - struct snd_soc_pcm_runtime *soc_rt = asoc_substream_to_rtd(substream);
runtime->hw.channels_min = runtime->hw.channels_max = QUAD_CHANNEL; snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_CHANNELS, &constraints_channels_quad);
- /* - * Topology for kblda7219m98373 & kblmax98373 supports only S24_LE. - * The DMIC also configured for S24_LE. Forcing the DMIC format to - * S24_LE due to the topology FW dependency. - */ - if (!strcmp(soc_rt->card->name, "kblda7219m98373") || - !strcmp(soc_rt->card->name, "kblmax98373")) { - runtime->hw.formats = SNDRV_PCM_FMTBIT_S24_LE; - snd_pcm_hw_constraint_msbits(runtime, 0, 32, 24); - } - return snd_pcm_hw_constraint_list(substream->runtime, 0, SNDRV_PCM_HW_PARAM_RATE, &constraints_rates); }