This is a note to let you know that I've just added the patch titled
usb: dwc2: fix STM ID/VBUS detection startup delay in
to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-linus branch.
The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.)
The patch will hopefully also be merged in Linus's tree for the next -rc kernel release.
If you have any questions about this process, please let me know.
From fac6bf87c55f7f0733efb0375565fb6a50cf2caf Mon Sep 17 00:00:00 2001
From: Amelie Delaunay amelie.delaunay@foss.st.com Date: Tue, 7 Dec 2021 13:45:10 +0100 Subject: usb: dwc2: fix STM ID/VBUS detection startup delay in dwc2_driver_probe
When activate_stm_id_vb_detection is enabled, ID and Vbus detection relies on sensing comparators. This detection needs time to stabilize. A delay was already applied in dwc2_resume() when reactivating the detection, but it wasn't done in dwc2_probe(). This patch adds delay after enabling STM ID/VBUS detection. Then, ID state is good when initializing gadget and host, and avoid to get a wrong Connector ID Status Change interrupt.
Fixes: a415083a11cc ("usb: dwc2: add support for STM32MP15 SoCs USB OTG HS and FS") Cc: stable stable@vger.kernel.org Acked-by: Minas Harutyunyan Minas.Harutyunyan@synopsys.com Signed-off-by: Amelie Delaunay amelie.delaunay@foss.st.com Link: https://lore.kernel.org/r/20211207124510.268841-1-amelie.delaunay@foss.st.co... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/dwc2/platform.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c index c8f18f3ba9e3..c331a5128c2c 100644 --- a/drivers/usb/dwc2/platform.c +++ b/drivers/usb/dwc2/platform.c @@ -575,6 +575,9 @@ static int dwc2_driver_probe(struct platform_device *dev) ggpio |= GGPIO_STM32_OTG_GCCFG_IDEN; ggpio |= GGPIO_STM32_OTG_GCCFG_VBDEN; dwc2_writel(hsotg, ggpio, GGPIO); + + /* ID/VBUS detection startup time */ + usleep_range(5000, 7000); }
retval = dwc2_drd_init(hsotg);