From: Marek Vasut marex@denx.de
commit 8967b27a6c1c19251989c7ab33c058d16e4a5f53 upstream.
Per schematic, both PU and SOC regulator are supplied from LTC3676 SW1 via VDDSOC_IN rail, add the PU input. Both VDD1P1, VDD2P5 are supplied from LTC3676 SW2 via VDDHIGH_IN rail, add both inputs.
While no instability or problems are currently observed, the regulators should be fully described in DT and that description should fully match the hardware, else this might lead to unforseen issues later. Fix this.
Fixes: 52c7a088badd ("ARM: dts: imx6q: Add support for the DHCOM iMX6 SoM and PDK2") Reviewed-by: Fabio Estevam festevam@gmail.com Signed-off-by: Marek Vasut marex@denx.de Cc: Christoph Niedermaier cniedermaier@dh-electronics.com Cc: Fabio Estevam festevam@gmail.com Cc: Ludwig Zenz lzenz@dh-electronics.com Cc: NXP Linux Team linux-imx@nxp.com Cc: Shawn Guo shawnguo@kernel.org Cc: stable@vger.kernel.org Reviewed-by: Christoph Niedermaier cniedermaier@dh-electronics.com Signed-off-by: Shawn Guo shawnguo@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/arm/boot/dts/imx6q-dhcom-som.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+)
--- a/arch/arm/boot/dts/imx6q-dhcom-som.dtsi +++ b/arch/arm/boot/dts/imx6q-dhcom-som.dtsi @@ -407,6 +407,18 @@ vin-supply = <&sw1_reg>; };
+®_pu { + vin-supply = <&sw1_reg>; +}; + +®_vdd1p1 { + vin-supply = <&sw2_reg>; +}; + +®_vdd2p5 { + vin-supply = <&sw2_reg>; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>;