From: Matthias Schiffer matthias.schiffer@ew.tq-group.com
[ Upstream commit 97e4827d775faa9a32b5e1a97959c69dd77d17a3 ]
cqspi_set_protocol() only set the data width, but ignored the command and address width (except for 8-8-8 DTR ops), leading to corruption of all transfers using 1-X-X or X-X-X ops. Fix by setting the other two widths as well.
While we're at it, simplify the code a bit by replacing the CQSPI_INST_TYPE_* constants with ilog2().
Tested on a TI AM64x with a Macronix MX25U51245G QSPI flash with 1-4-4 read and write operations.
Signed-off-by: Matthias Schiffer matthias.schiffer@ew.tq-group.com Link: https://lore.kernel.org/r/20220331110819.133392-1-matthias.schiffer@ew.tq-gr... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi-cadence-quadspi.c | 46 ++++++++----------------------- 1 file changed, 12 insertions(+), 34 deletions(-)
diff --git a/drivers/spi/spi-cadence-quadspi.c b/drivers/spi/spi-cadence-quadspi.c index b808c94641fa..75f356041138 100644 --- a/drivers/spi/spi-cadence-quadspi.c +++ b/drivers/spi/spi-cadence-quadspi.c @@ -19,6 +19,7 @@ #include <linux/iopoll.h> #include <linux/jiffies.h> #include <linux/kernel.h> +#include <linux/log2.h> #include <linux/module.h> #include <linux/of_device.h> #include <linux/of.h> @@ -102,12 +103,6 @@ struct cqspi_driver_platdata { #define CQSPI_TIMEOUT_MS 500 #define CQSPI_READ_TIMEOUT_MS 10
-/* Instruction type */ -#define CQSPI_INST_TYPE_SINGLE 0 -#define CQSPI_INST_TYPE_DUAL 1 -#define CQSPI_INST_TYPE_QUAD 2 -#define CQSPI_INST_TYPE_OCTAL 3 - #define CQSPI_DUMMY_CLKS_PER_BYTE 8 #define CQSPI_DUMMY_BYTES_MAX 4 #define CQSPI_DUMMY_CLKS_MAX 31 @@ -376,10 +371,6 @@ static unsigned int cqspi_calc_dummy(const struct spi_mem_op *op, bool dtr) static int cqspi_set_protocol(struct cqspi_flash_pdata *f_pdata, const struct spi_mem_op *op) { - f_pdata->inst_width = CQSPI_INST_TYPE_SINGLE; - f_pdata->addr_width = CQSPI_INST_TYPE_SINGLE; - f_pdata->data_width = CQSPI_INST_TYPE_SINGLE; - /* * For an op to be DTR, cmd phase along with every other non-empty * phase should have dtr field set to 1. If an op phase has zero @@ -389,32 +380,23 @@ static int cqspi_set_protocol(struct cqspi_flash_pdata *f_pdata, (!op->addr.nbytes || op->addr.dtr) && (!op->data.nbytes || op->data.dtr);
- switch (op->data.buswidth) { - case 0: - break; - case 1: - f_pdata->data_width = CQSPI_INST_TYPE_SINGLE; - break; - case 2: - f_pdata->data_width = CQSPI_INST_TYPE_DUAL; - break; - case 4: - f_pdata->data_width = CQSPI_INST_TYPE_QUAD; - break; - case 8: - f_pdata->data_width = CQSPI_INST_TYPE_OCTAL; - break; - default: - return -EINVAL; - } + f_pdata->inst_width = 0; + if (op->cmd.buswidth) + f_pdata->inst_width = ilog2(op->cmd.buswidth); + + f_pdata->addr_width = 0; + if (op->addr.buswidth) + f_pdata->addr_width = ilog2(op->addr.buswidth); + + f_pdata->data_width = 0; + if (op->data.buswidth) + f_pdata->data_width = ilog2(op->data.buswidth);
/* Right now we only support 8-8-8 DTR mode. */ if (f_pdata->dtr) { switch (op->cmd.buswidth) { case 0: - break; case 8: - f_pdata->inst_width = CQSPI_INST_TYPE_OCTAL; break; default: return -EINVAL; @@ -422,9 +404,7 @@ static int cqspi_set_protocol(struct cqspi_flash_pdata *f_pdata,
switch (op->addr.buswidth) { case 0: - break; case 8: - f_pdata->addr_width = CQSPI_INST_TYPE_OCTAL; break; default: return -EINVAL; @@ -432,9 +412,7 @@ static int cqspi_set_protocol(struct cqspi_flash_pdata *f_pdata,
switch (op->data.buswidth) { case 0: - break; case 8: - f_pdata->data_width = CQSPI_INST_TYPE_OCTAL; break; default: return -EINVAL;