Prevent -ETIMEDOUT error on .suspend(). e.g. If gadget driver is loaded and we are connected to a USB host, all transfers must be stopped before stopping the controller else we will not get a clean stop i.e. dwc3_gadget_run_stop() will take several seconds to complete and will return -ETIMEDOUT.
Handle error cases properly in dwc3_gadget_suspend(). Simplify dwc3_gadget_resume() by using the introduced helper function.
Fixes: 9f8a67b65a49 ("usb: dwc3: gadget: fix gadget suspend/resume") Cc: stable@vger.kernel.org Suggested-by: Thinh Nguyen Thinh.Nguyen@synopsys.com Signed-off-by: Roger Quadros rogerq@kernel.org Acked-by: Thinh Nguyen Thinh.Nguyen@synopsys.com ---
Changelog:
v3: - dropped patch 1. Now no longer check for softconnect during .suspend - in suspend error path check for softconnect and enable softconnect accordingly - added Acked-by tag by Thinh Nguyen
v2: - rebase on greg/usb-next - split into 2 patches. Add Fixes tag and cc stable. - do not check for !softconnect in error condition in dwc3_gadget_suspend()
drivers/usb/dwc3/gadget.c | 67 ++++++++++++++++++++------------------- 1 file changed, 34 insertions(+), 33 deletions(-)
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index c0ca4d12f95d..2996bcb4d53d 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -2699,6 +2699,21 @@ static int dwc3_gadget_soft_disconnect(struct dwc3 *dwc) return ret; }
+static int dwc3_gadget_soft_connect(struct dwc3 *dwc) +{ + /* + * In the Synopsys DWC_usb31 1.90a programming guide section + * 4.1.9, it specifies that for a reconnect after a + * device-initiated disconnect requires a core soft reset + * (DCTL.CSftRst) before enabling the run/stop bit. + */ + dwc3_core_soft_reset(dwc); + + dwc3_event_buffers_setup(dwc); + __dwc3_gadget_start(dwc); + return dwc3_gadget_run_stop(dwc, true); +} + static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on) { struct dwc3 *dwc = gadget_to_dwc(g); @@ -2737,21 +2752,10 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on)
synchronize_irq(dwc->irq_gadget);
- if (!is_on) { + if (!is_on) ret = dwc3_gadget_soft_disconnect(dwc); - } else { - /* - * In the Synopsys DWC_usb31 1.90a programming guide section - * 4.1.9, it specifies that for a reconnect after a - * device-initiated disconnect requires a core soft reset - * (DCTL.CSftRst) before enabling the run/stop bit. - */ - dwc3_core_soft_reset(dwc); - - dwc3_event_buffers_setup(dwc); - __dwc3_gadget_start(dwc); - ret = dwc3_gadget_run_stop(dwc, true); - } + else + ret = dwc3_gadget_soft_connect(dwc);
pm_runtime_put(dwc->dev);
@@ -4655,42 +4659,39 @@ void dwc3_gadget_exit(struct dwc3 *dwc) int dwc3_gadget_suspend(struct dwc3 *dwc) { unsigned long flags; + int ret;
if (!dwc->gadget_driver) return 0;
- dwc3_gadget_run_stop(dwc, false); + ret = dwc3_gadget_soft_disconnect(dwc); + if (ret) + goto err;
spin_lock_irqsave(&dwc->lock, flags); dwc3_disconnect_gadget(dwc); - __dwc3_gadget_stop(dwc); spin_unlock_irqrestore(&dwc->lock, flags);
return 0; + +err: + /* + * Attempt to reset the controller's state. Likely no + * communication can be established until the host + * performs a port reset. + */ + if (dwc->softconnect) + dwc3_gadget_soft_connect(dwc); + + return ret; }
int dwc3_gadget_resume(struct dwc3 *dwc) { - int ret; - if (!dwc->gadget_driver || !dwc->softconnect) return 0;
- ret = __dwc3_gadget_start(dwc); - if (ret < 0) - goto err0; - - ret = dwc3_gadget_run_stop(dwc, true); - if (ret < 0) - goto err1; - - return 0; - -err1: - __dwc3_gadget_stop(dwc); - -err0: - return ret; + return dwc3_gadget_soft_connect(dwc); }
void dwc3_gadget_process_pending_events(struct dwc3 *dwc)