The patch below does not apply to the 6.12-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to stable@vger.kernel.org.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y git checkout FETCH_HEAD git cherry-pick -x 65ba2a6e77e9e5c843a591055789050e77b5c65e # <resolve conflicts, build, test, etc.> git commit -s git send-email --to 'stable@vger.kernel.org' --in-reply-to '2025081521-dangle-drapery-9a9a@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 65ba2a6e77e9e5c843a591055789050e77b5c65e Mon Sep 17 00:00:00 2001 From: Siddharth Vadapalli s-vadapalli@ti.com Date: Mon, 23 Jun 2025 15:36:57 +0530 Subject: [PATCH] arm64: dts: ti: k3-j722s-evm: Fix USB gpio-hog level for Type-C
According to the "GPIO Expander Map / Table" section of the J722S EVM Schematic within the Evaluation Module Design Files package [0], the GPIO Pin P05 located on the GPIO Expander 1 (I2C0/0x23) has to be pulled down to select the Type-C interface. Since commit under Fixes claims to enable the Type-C interface, update the property within "p05-hog" from "output-high" to "output-low", thereby switching from the Type-A interface to the Type-C interface.
[0]: https://www.ti.com/lit/zip/sprr495
Cc: stable@vger.kernel.org Fixes: 485705df5d5f ("arm64: dts: ti: k3-j722s: Enable PCIe and USB support on J722S-EVM") Signed-off-by: Siddharth Vadapalli s-vadapalli@ti.com Link: https://lore.kernel.org/r/20250623100657.4082031-1-s-vadapalli@ti.com Signed-off-by: Vignesh Raghavendra vigneshr@ti.com
diff --git a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts index a47852fdca70..d0533723412a 100644 --- a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts +++ b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts @@ -634,7 +634,7 @@ p05-hog { /* P05 - USB2.0_MUX_SEL */ gpio-hog; gpios = <5 GPIO_ACTIVE_LOW>; - output-high; + output-low; };
p01_hog: p01-hog {