From: Harshit Shah harshitshah.opendev@gmail.com
[ Upstream commit 374c13f9080a1b9835a5ed3e7bea93cf8e2dc262 ]
As per the Cadence IP document fixed the I2C clock divider value limit from 16 bits instead of 10 bits. Without this change setting up the I2C clock to low frequencies will not work as the prescaler value might be greater than 10 bit number.
I3C clock divider value is 10 bits only. Updating the macro names for both.
Signed-off-by: Harshit Shah harshitshah.opendev@gmail.com Link: https://lore.kernel.org/r/1703927483-28682-1-git-send-email-harshitshah.open... Signed-off-by: Alexandre Belloni alexandre.belloni@bootlin.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/i3c/master/i3c-master-cdns.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/i3c/master/i3c-master-cdns.c b/drivers/i3c/master/i3c-master-cdns.c index 6b9df33ac561..6b126fce5a9e 100644 --- a/drivers/i3c/master/i3c-master-cdns.c +++ b/drivers/i3c/master/i3c-master-cdns.c @@ -77,7 +77,8 @@ #define PRESCL_CTRL0 0x14 #define PRESCL_CTRL0_I2C(x) ((x) << 16) #define PRESCL_CTRL0_I3C(x) (x) -#define PRESCL_CTRL0_MAX GENMASK(9, 0) +#define PRESCL_CTRL0_I3C_MAX GENMASK(9, 0) +#define PRESCL_CTRL0_I2C_MAX GENMASK(15, 0)
#define PRESCL_CTRL1 0x18 #define PRESCL_CTRL1_PP_LOW_MASK GENMASK(15, 8) @@ -1234,7 +1235,7 @@ static int cdns_i3c_master_bus_init(struct i3c_master_controller *m) return -EINVAL;
pres = DIV_ROUND_UP(sysclk_rate, (bus->scl_rate.i3c * 4)) - 1; - if (pres > PRESCL_CTRL0_MAX) + if (pres > PRESCL_CTRL0_I3C_MAX) return -ERANGE;
bus->scl_rate.i3c = sysclk_rate / ((pres + 1) * 4); @@ -1247,7 +1248,7 @@ static int cdns_i3c_master_bus_init(struct i3c_master_controller *m) max_i2cfreq = bus->scl_rate.i2c;
pres = (sysclk_rate / (max_i2cfreq * 5)) - 1; - if (pres > PRESCL_CTRL0_MAX) + if (pres > PRESCL_CTRL0_I2C_MAX) return -ERANGE;
bus->scl_rate.i2c = sysclk_rate / ((pres + 1) * 5);