On 17.05.2024 14:43:55, Vitor Soares wrote:
From: Vitor Soares vitor.soares@toradex.com
When the mcp251xfd_start_xmit() function fails, the driver stops processing messages, and the interrupt routine does not return, running indefinitely even after killing the running application.
Error messages: [ 441.298819] mcp251xfd spi2.0 can0: ERROR in mcp251xfd_start_xmit: -16 [ 441.306498] mcp251xfd spi2.0 can0: Transmit Event FIFO buffer not empty. (seq=0x000017c7, tef_tail=0x000017cf, tef_head=0x000017d0, tx_head=0x000017d3). ... and repeat forever.
The issue can be triggered when multiple devices share the same SPI interface. And there is concurrent access to the bus.
The problem occurs because tx_ring->head increments even if mcp251xfd_start_xmit() fails. Consequently, the driver skips one TX package while still expecting a response in mcp251xfd_handle_tefif_one().
This patch resolves the issue by starting a workqueue to write the tx obj synchronously if err = -EBUSY. In case of another error, it decrements tx_ring->head, removes skb from the echo stack, and drops the message.
Fixes: 55e5b97f003e ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN") Cc: stable@vger.kernel.org Signed-off-by: Vitor Soares vitor.soares@toradex.com
I've reworked the last sentence for a bit and applied to linux-can.
Thanks, Marc