6.12-stable review patch. If anyone has any objections, please let me know.
------------------
From: Niklas Cassel cassel@kernel.org
commit 3708acbd5f169ebafe1faa519cb28adc56295546 upstream.
In commit 4284c88fff0e ("PCI: designware-ep: Allow pci_epc_set_bar() update inbound map address") set_bar() was modified to support dynamically changing the backing physical address of a BAR that was already configured.
This means that set_bar() can be called twice, without ever calling clear_bar() (as calling clear_bar() would clear the BAR's PCI address assigned by the host).
This can only be done if the new BAR size/flags does not differ from the existing BAR configuration. Add these missing checks.
If we allow set_bar() to set e.g. a new BAR size that differs from the existing BAR size, the new address translation range will be smaller than the BAR size already determined by the host, which would mean that a read past the new BAR size would pass the iATU untranslated, which could allow the host to read memory not belonging to the new struct pci_epf_bar.
While at it, add comments which clarifies the support for dynamically changing the physical address of a BAR. (Which was also missing.)
Fixes: 4284c88fff0e ("PCI: designware-ep: Allow pci_epc_set_bar() update inbound map address") Link: https://lore.kernel.org/r/20241213143301.4158431-10-cassel@kernel.org Signed-off-by: Niklas Cassel cassel@kernel.org Signed-off-by: Krzysztof Wilczyński kwilczynski@kernel.org Reviewed-by: Manivannan Sadhasivam manivannan.sadhasivam@linaro.org Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/pci/controller/dwc/pcie-designware-ep.c | 22 +++++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-)
--- a/drivers/pci/controller/dwc/pcie-designware-ep.c +++ b/drivers/pci/controller/dwc/pcie-designware-ep.c @@ -222,8 +222,28 @@ static int dw_pcie_ep_set_bar(struct pci if ((flags & PCI_BASE_ADDRESS_MEM_TYPE_64) && (bar & 1)) return -EINVAL;
- if (ep->epf_bar[bar]) + /* + * Certain EPF drivers dynamically change the physical address of a BAR + * (i.e. they call set_bar() twice, without ever calling clear_bar(), as + * calling clear_bar() would clear the BAR's PCI address assigned by the + * host). + */ + if (ep->epf_bar[bar]) { + /* + * We can only dynamically change a BAR if the new BAR size and + * BAR flags do not differ from the existing configuration. + */ + if (ep->epf_bar[bar]->barno != bar || + ep->epf_bar[bar]->size != size || + ep->epf_bar[bar]->flags != flags) + return -EINVAL; + + /* + * When dynamically changing a BAR, skip writing the BAR reg, as + * that would clear the BAR's PCI address assigned by the host. + */ goto config_atu; + }
reg = PCI_BASE_ADDRESS_0 + (4 * bar);