From: Pali Rohár pali@kernel.org
[ Upstream commit bcdb6fd4f3e9ac1097698c8d8f56b70853b49873 ]
Slot capabilities are currently not reported because emulated bridge does not report the PCI_EXP_FLAGS_SLOT flag.
Set PCI_EXP_FLAGS_SLOT to let the kernel know that PCI_EXP_SLT* registers are supported.
Move setting of PCI_EXP_SLTCTL register from "dynamic" pcie_conf_read function to static buffer as it is only statically filled the PCI_EXP_SLTSTA_PDS flag and dynamic read callback is not needed for this register.
Set Presence State Bit to 1 since there is no support for unplugging the card and there is currently no platform able to detect presence of a card - in such a case the bit needs to be set to 1.
Finally correctly set Physical Slot Number to 1 since there is only one port and zero value is reserved for ports within the same silicon as Root Port which is not our case for Aardvark HW.
Link: https://lore.kernel.org/r/20220524132827.8837-3-kabel@kernel.org Signed-off-by: Pali Rohár pali@kernel.org Signed-off-by: Marek Behún kabel@kernel.org Signed-off-by: Bjorn Helgaas bhelgaas@google.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/controller/pci-aardvark.c | 33 +++++++++++++++++++-------- 1 file changed, 24 insertions(+), 9 deletions(-)
diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c index ffec82c8a523..62db476a8651 100644 --- a/drivers/pci/controller/pci-aardvark.c +++ b/drivers/pci/controller/pci-aardvark.c @@ -8,6 +8,7 @@ * Author: Hezi Shahmoon hezi.shahmoon@marvell.com */
+#include <linux/bitfield.h> #include <linux/delay.h> #include <linux/gpio/consumer.h> #include <linux/interrupt.h> @@ -857,14 +858,11 @@ advk_pci_bridge_emul_pcie_conf_read(struct pci_bridge_emul *bridge,
switch (reg) { - case PCI_EXP_SLTCTL: - *value = PCI_EXP_SLTSTA_PDS << 16; - return PCI_BRIDGE_EMUL_HANDLED; - /* - * PCI_EXP_RTCTL and PCI_EXP_RTSTA are also supported, but do not need - * to be handled here, because their values are stored in emulated - * config space buffer, and we read them from there when needed. + * PCI_EXP_SLTCAP, PCI_EXP_SLTCTL, PCI_EXP_RTCTL and PCI_EXP_RTSTA are + * also supported, but do not need to be handled here, because their + * values are stored in emulated config space buffer, and we read them + * from there when needed. */
case PCI_EXP_LNKCAP: { @@ -977,8 +975,25 @@ static int advk_sw_pci_bridge_init(struct advk_pcie *pcie) /* Support interrupt A for MSI feature */ bridge->conf.intpin = PCI_INTERRUPT_INTA;
- /* Aardvark HW provides PCIe Capability structure in version 2 */ - bridge->pcie_conf.cap = cpu_to_le16(2); + /* + * Aardvark HW provides PCIe Capability structure in version 2 and + * indicate slot support, which is emulated. + */ + bridge->pcie_conf.cap = cpu_to_le16(2 | PCI_EXP_FLAGS_SLOT); + + /* + * Set Presence Detect State bit permanently since there is no support + * for unplugging the card nor detecting whether it is plugged. (If a + * platform exists in the future that supports it, via a GPIO for + * example, it should be implemented via this bit.) + * + * Set physical slot number to 1 since there is only one port and zero + * value is reserved for ports within the same silicon as Root Port + * which is not our case. + */ + bridge->pcie_conf.slotcap = cpu_to_le32(FIELD_PREP(PCI_EXP_SLTCAP_PSN, + 1)); + bridge->pcie_conf.slotsta = cpu_to_le16(PCI_EXP_SLTSTA_PDS);
/* Indicates supports for Completion Retry Status */ bridge->pcie_conf.rootcap = cpu_to_le16(PCI_EXP_RTCAP_CRSVIS);