From: Dan Williams dan.j.williams@intel.com
commit e4f6dfa9ef756a3934a4caf618b1e86e9e8e21d0 upstream.
When programming port decode targets, the algorithm wants to ensure that two devices are compatible to be programmed as peers beneath a given port. A compatible peer is a target that shares the same dport, and where that target's interleave position also routes it to the same dport. Compatibility is determined by the device's interleave position being >= to distance. For example, if a given dport can only map every Nth position then positions less than N away from the last target programmed are incompatible.
The @distance for the host-bridge's cxl_port in a simple dual-ported host-bridge configuration with 2 direct-attached devices is 1, i.e. An x2 region divided by 2 dports to reach 2 region targets.
An x4 region under an x2 host-bridge would need 2 intervening switches where the @distance at the host bridge level is 2 (x4 region divided by 2 switches to reach 4 devices).
However, the distance between peers underneath a single ported host-bridge is always zero because there is no limit to the number of devices that can be mapped. In other words, there are no decoders to program in a passthrough, all descendants are mapped and distance only starts matters for the intervening descendant ports of the passthrough port.
Add tracking for the number of dports mapped to a port, and use that to detect the passthrough case for calculating @distance.
Cc: stable@vger.kernel.org Reported-by: Bobo WL lmw.bobo@gmail.com Reported-by: Jonathan Cameron Jonathan.Cameron@huawei.com Link: http://lore.kernel.org/r/20221010172057.00001559@huawei.com Fixes: 27b3f8d13830 ("cxl/region: Program target lists") Reviewed-by: Vishal Verma vishal.l.verma@intel.com Link: https://lore.kernel.org/r/166752185440.947915.6617495912508299445.stgit@dwil... Signed-off-by: Dan Williams dan.j.williams@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/cxl/core/port.c | 11 +++++++++-- drivers/cxl/core/region.c | 9 ++++++++- drivers/cxl/cxl.h | 2 ++ 3 files changed, 19 insertions(+), 3 deletions(-)
--- a/drivers/cxl/core/port.c +++ b/drivers/cxl/core/port.c @@ -811,6 +811,7 @@ static struct cxl_dport *find_dport(stru static int add_dport(struct cxl_port *port, struct cxl_dport *new) { struct cxl_dport *dup; + int rc;
device_lock_assert(&port->dev); dup = find_dport(port, new->port_id); @@ -821,8 +822,14 @@ static int add_dport(struct cxl_port *po dev_name(dup->dport)); return -EBUSY; } - return xa_insert(&port->dports, (unsigned long)new->dport, new, - GFP_KERNEL); + + rc = xa_insert(&port->dports, (unsigned long)new->dport, new, + GFP_KERNEL); + if (rc) + return rc; + + port->nr_dports++; + return 0; }
/* --- a/drivers/cxl/core/region.c +++ b/drivers/cxl/core/region.c @@ -989,7 +989,14 @@ static int cxl_port_setup_targets(struct if (cxl_rr->nr_targets_set) { int i, distance;
- distance = p->nr_targets / cxl_rr->nr_targets; + /* + * Passthrough ports impose no distance requirements between + * peers + */ + if (port->nr_dports == 1) + distance = 0; + else + distance = p->nr_targets / cxl_rr->nr_targets; for (i = 0; i < cxl_rr->nr_targets_set; i++) if (ep->dport == cxlsd->target[i]) { rc = check_last_peer(cxled, ep, cxl_rr, --- a/drivers/cxl/cxl.h +++ b/drivers/cxl/cxl.h @@ -457,6 +457,7 @@ struct cxl_pmem_region { * @regions: cxl_region_ref instances, regions mapped by this port * @parent_dport: dport that points to this port in the parent * @decoder_ida: allocator for decoder ids + * @nr_dports: number of entries in @dports * @hdm_end: track last allocated HDM decoder instance for allocation ordering * @commit_end: cursor to track highest committed decoder for commit ordering * @component_reg_phys: component register capability base address (optional) @@ -475,6 +476,7 @@ struct cxl_port { struct xarray regions; struct cxl_dport *parent_dport; struct ida decoder_ida; + int nr_dports; int hdm_end; int commit_end; resource_size_t component_reg_phys;