From: Vladimir Oltean vladimir.oltean@nxp.com
[ Upstream commit a8eff03545d4cef12ae66a1905627c1818a0f81a ]
We collect the software statistics counters for RX bytes (reported to /proc/net/dev and to ethtool -S $dev | grep 'rx_bytes: ") at a time when skb->len has already been adjusted by the eth_type_trans() -> skb_pull_inline(skb, ETH_HLEN) call to exclude the L2 header.
This means that when connecting 2 DSA interfaces back to back and sending 1 packet with length 100, the sending interface will report tx_bytes as incrementing by 100, and the receiving interface will report rx_bytes as incrementing by 86.
Since accounting for that in scripts is quirky and is something that would be DSA-specific behavior (requiring users to know that they are running on a DSA interface in the first place), the proposal is that we treat it as a bug and fix it.
This design bug has always existed in DSA, according to my analysis: commit 91da11f870f0 ("net: Distributed Switch Architecture protocol support") also updates skb->dev->stats.rx_bytes += skb->len after the eth_type_trans() call. Technically, prior to Florian's commit a86d8becc3f0 ("net: dsa: Factor bottom tag receive functions"), each and every vendor-specific tagging protocol driver open-coded the same bug, until the buggy code was consolidated into something resembling what can be seen now. So each and every driver should have its own Fixes: tag, because of their different histories until the convergence point. I'm not going to do that, for the sake of simplicity, but just blame the oldest appearance of buggy code.
There are 2 ways to fix the problem. One is the obvious way, and the other is how I ended up doing it. Obvious would have been to move dev_sw_netstats_rx_add() one line above eth_type_trans(), and below skb_push(skb, ETH_HLEN). But DSA processing is not as simple as that. We count the bytes after removing everything DSA-related from the packet, to emulate what the packet's length was, on the wire, when the user port received it.
When eth_type_trans() executes, dsa_untag_bridge_pvid() has not run yet, so in case the switch driver requests this behavior - commit 412a1526d067 ("net: dsa: untag the bridge pvid from rx skbs") has the details - the obvious variant of the fix wouldn't have worked, because the positioning there would have also counted the not-yet-stripped VLAN header length, something which is absent from the packet as seen on the wire (there it may be untagged, whereas software will see it as PVID-tagged).
Fixes: f613ed665bb3 ("net: dsa: Add support for 64-bit statistics") Signed-off-by: Vladimir Oltean vladimir.oltean@nxp.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/dsa/tag.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/dsa/tag.c b/net/dsa/tag.c index b2fba1a003ce3..5105a5ff58fa2 100644 --- a/net/dsa/tag.c +++ b/net/dsa/tag.c @@ -114,7 +114,7 @@ static int dsa_switch_rcv(struct sk_buff *skb, struct net_device *dev, skb = nskb; }
- dev_sw_netstats_rx_add(skb->dev, skb->len); + dev_sw_netstats_rx_add(skb->dev, skb->len + ETH_HLEN);
if (dsa_skb_defer_rx_timestamp(p, skb)) return 0;