6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Prashanth K prashanth.k@oss.qualcomm.com
commit 40e89ff5750fca2c1d6da93f98a2038716bba86c upstream.
Currently the USB gadget will be set as bus-powered based solely on whether its bMaxPower is greater than 100mA, but this may miss devices that may legitimately draw less than 100mA but still want to report as bus-powered. Similarly during suspend & resume, USB gadget is incorrectly marked as bus/self powered without checking the bmAttributes field. Fix these by configuring the USB gadget as self or bus powered based on bmAttributes, and explicitly set it as bus-powered if it draws more than 100mA.
Cc: stable stable@kernel.org Fixes: 5e5caf4fa8d3 ("usb: gadget: composite: Inform controller driver of self-powered") Signed-off-by: Prashanth K prashanth.k@oss.qualcomm.com Link: https://lore.kernel.org/r/20250217120328.2446639-1-prashanth.k@oss.qualcomm.... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/gadget/composite.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-)
--- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -1050,10 +1050,11 @@ static int set_config(struct usb_composi else usb_gadget_set_remote_wakeup(gadget, 0); done: - if (power <= USB_SELF_POWER_VBUS_MAX_DRAW) - usb_gadget_set_selfpowered(gadget); - else + if (power > USB_SELF_POWER_VBUS_MAX_DRAW || + !(c->bmAttributes & USB_CONFIG_ATT_SELFPOWER)) usb_gadget_clear_selfpowered(gadget); + else + usb_gadget_set_selfpowered(gadget);
usb_gadget_vbus_draw(gadget, power); if (result >= 0 && cdev->delayed_status) @@ -2615,7 +2616,9 @@ void composite_suspend(struct usb_gadget
cdev->suspended = 1;
- usb_gadget_set_selfpowered(gadget); + if (cdev->config->bmAttributes & USB_CONFIG_ATT_SELFPOWER) + usb_gadget_set_selfpowered(gadget); + usb_gadget_vbus_draw(gadget, 2); }
@@ -2649,8 +2652,11 @@ void composite_resume(struct usb_gadget else maxpower = min(maxpower, 900U);
- if (maxpower > USB_SELF_POWER_VBUS_MAX_DRAW) + if (maxpower > USB_SELF_POWER_VBUS_MAX_DRAW || + !(cdev->config->bmAttributes & USB_CONFIG_ATT_SELFPOWER)) usb_gadget_clear_selfpowered(gadget); + else + usb_gadget_set_selfpowered(gadget);
usb_gadget_vbus_draw(gadget, maxpower); } else {