From: Bartłomiej Maryńczak marynczakbartlomiej@gmail.com
[ Upstream commit 293c485cbac2607595fdaae2b1fb390fc7b2d014 ]
Patch for Goodix 27c6:0d42 touchpads found in Inspiron 5515 laptops.
After resume from suspend, one can communicate with this device just fine. We can read data from it or request a reset, but for some reason the interrupt line will not go up when new events are available. (it can correctly respond to a reset with an interrupt tho)
The only way I found to wake this device up is to send anything to it after ~1.5s mark, for example a simple read request, or power mode change.
In this patch, I simply delay the resume steps with msleep, this will cause the set_power request to happen after the ~1.5s barrier causing the device to resume its event interrupts.
Sleep was used rather than delayed_work to make this workaround as non-invasive as possible.
[jkosina@suse.com: shortlog update] Signed-off-by: Bartłomiej Maryńczak marynczakbartlomiej@gmail.com Signed-off-by: Jiri Kosina jkosina@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hid/hid-ids.h | 1 + drivers/hid/i2c-hid/i2c-hid-core.c | 10 ++++++++++ 2 files changed, 11 insertions(+)
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 8a991b30e3c6d..25f96494700d8 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -509,6 +509,7 @@ #define I2C_DEVICE_ID_GOODIX_01E8 0x01e8 #define I2C_DEVICE_ID_GOODIX_01E9 0x01e9 #define I2C_DEVICE_ID_GOODIX_01F0 0x01f0 +#define I2C_DEVICE_ID_GOODIX_0D42 0x0d42
#define USB_VENDOR_ID_GOODTOUCH 0x1aad #define USB_DEVICE_ID_GOODTOUCH_000f 0x000f diff --git a/drivers/hid/i2c-hid/i2c-hid-core.c b/drivers/hid/i2c-hid/i2c-hid-core.c index 2f8a9d3f1e861..8914c7db94718 100644 --- a/drivers/hid/i2c-hid/i2c-hid-core.c +++ b/drivers/hid/i2c-hid/i2c-hid-core.c @@ -50,6 +50,7 @@ #define I2C_HID_QUIRK_BAD_INPUT_SIZE BIT(3) #define I2C_HID_QUIRK_NO_WAKEUP_AFTER_RESET BIT(4) #define I2C_HID_QUIRK_NO_SLEEP_ON_SUSPEND BIT(5) +#define I2C_HID_QUIRK_DELAY_WAKEUP_AFTER_RESUME BIT(6)
/* Command opcodes */ #define I2C_HID_OPCODE_RESET 0x01 @@ -140,6 +141,8 @@ static const struct i2c_hid_quirks { { USB_VENDOR_ID_ELAN, HID_ANY_ID, I2C_HID_QUIRK_NO_WAKEUP_AFTER_RESET | I2C_HID_QUIRK_BOGUS_IRQ }, + { I2C_VENDOR_ID_GOODIX, I2C_DEVICE_ID_GOODIX_0D42, + I2C_HID_QUIRK_DELAY_WAKEUP_AFTER_RESUME }, { 0, 0 } };
@@ -981,6 +984,13 @@ static int i2c_hid_core_resume(struct i2c_hid *ihid) return -ENXIO; }
+ /* On Goodix 27c6:0d42 wait extra time before device wakeup. + * It's not clear why but if we send wakeup too early, the device will + * never trigger input interrupts. + */ + if (ihid->quirks & I2C_HID_QUIRK_DELAY_WAKEUP_AFTER_RESUME) + msleep(1500); + /* Instead of resetting device, simply powers the device on. This * solves "incomplete reports" on Raydium devices 2386:3118 and * 2386:4B33 and fixes various SIS touchscreens no longer sending