The patch below does not apply to the 6.6-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to stable@vger.kernel.org.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y git checkout FETCH_HEAD git cherry-pick -x 591a07588c03437dbcc3addfff07675de95a461e # <resolve conflicts, build, test, etc.> git commit -s git send-email --to 'stable@vger.kernel.org' --in-reply-to '2025041723-crib-sank-56c0@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 591a07588c03437dbcc3addfff07675de95a461e Mon Sep 17 00:00:00 2001 From: Dave Stevenson dave.stevenson@raspberrypi.com Date: Thu, 23 Jan 2025 15:37:49 +0000 Subject: [PATCH] media: imx219: Adjust PLL settings based on the number of MIPI lanes
Commit ceddfd4493b3 ("media: i2c: imx219: Support four-lane operation") added support for device tree to allow configuration of the sensor to use 4 lanes with a link frequency of 363MHz, and amended the advertised pixel rate to 280.8MPix/s.
However it didn't change any of the PLL settings, so actually it would have been running overclocked in the MIPI block, and with the frame rate and exposure calculations being wrong as the pixel rate was unchanged.
The pixel rate and link frequency advertised were taken from the "Clock Setting Example" section of the datasheet. However those are based on an external clock of 12MHz, and are unachievable with a clock of 24MHz - it seems PREPLLCLK_VT_DIV and PREPLLCK_OP_DIV can ONLY be set via the automatic configuration documented in "9-1-2 EXCK_FREQ setting depend on INCK frequency", not by writing the registers. The closest we can get with a 24MHz clock is 281.6MPix/s and 364MHz.
Dropping all support for the 363MHz link frequency would cause problems for existing users, so allow it, but log a warning that the requested value is being changed to the supported one.
Fixes: ceddfd4493b3 ("media: i2c: imx219: Support four-lane operation") Cc: stable@vger.kernel.org Co-developed-by: Peyton Howe peyton.howe@bellsouth.net Signed-off-by: Peyton Howe peyton.howe@bellsouth.net Signed-off-by: Dave Stevenson dave.stevenson@raspberrypi.com Signed-off-by: Sakari Ailus sakari.ailus@linux.intel.com Signed-off-by: Hans Verkuil hverkuil@xs4all.nl
diff --git a/drivers/media/i2c/imx219.c b/drivers/media/i2c/imx219.c index c6c30109225c..64227eb423d4 100644 --- a/drivers/media/i2c/imx219.c +++ b/drivers/media/i2c/imx219.c @@ -133,10 +133,11 @@
/* Pixel rate is fixed for all the modes */ #define IMX219_PIXEL_RATE 182400000 -#define IMX219_PIXEL_RATE_4LANE 280800000 +#define IMX219_PIXEL_RATE_4LANE 281600000
#define IMX219_DEFAULT_LINK_FREQ 456000000 -#define IMX219_DEFAULT_LINK_FREQ_4LANE 363000000 +#define IMX219_DEFAULT_LINK_FREQ_4LANE_UNSUPPORTED 363000000 +#define IMX219_DEFAULT_LINK_FREQ_4LANE 364000000
/* IMX219 native and active pixel array size. */ #define IMX219_NATIVE_WIDTH 3296U @@ -168,15 +169,6 @@ static const struct cci_reg_sequence imx219_common_regs[] = { { CCI_REG8(0x30eb), 0x05 }, { CCI_REG8(0x30eb), 0x09 },
- /* PLL Clock Table */ - { IMX219_REG_VTPXCK_DIV, 5 }, - { IMX219_REG_VTSYCK_DIV, 1 }, - { IMX219_REG_PREPLLCK_VT_DIV, 3 }, /* 0x03 = AUTO set */ - { IMX219_REG_PREPLLCK_OP_DIV, 3 }, /* 0x03 = AUTO set */ - { IMX219_REG_PLL_VT_MPY, 57 }, - { IMX219_REG_OPSYCK_DIV, 1 }, - { IMX219_REG_PLL_OP_MPY, 114 }, - /* Undocumented registers */ { CCI_REG8(0x455e), 0x00 }, { CCI_REG8(0x471e), 0x4b }, @@ -201,12 +193,45 @@ static const struct cci_reg_sequence imx219_common_regs[] = { { IMX219_REG_EXCK_FREQ, IMX219_EXCK_FREQ(IMX219_XCLK_FREQ / 1000000) }, };
+static const struct cci_reg_sequence imx219_2lane_regs[] = { + /* PLL Clock Table */ + { IMX219_REG_VTPXCK_DIV, 5 }, + { IMX219_REG_VTSYCK_DIV, 1 }, + { IMX219_REG_PREPLLCK_VT_DIV, 3 }, /* 0x03 = AUTO set */ + { IMX219_REG_PREPLLCK_OP_DIV, 3 }, /* 0x03 = AUTO set */ + { IMX219_REG_PLL_VT_MPY, 57 }, + { IMX219_REG_OPSYCK_DIV, 1 }, + { IMX219_REG_PLL_OP_MPY, 114 }, + + /* 2-Lane CSI Mode */ + { IMX219_REG_CSI_LANE_MODE, IMX219_CSI_2_LANE_MODE }, +}; + +static const struct cci_reg_sequence imx219_4lane_regs[] = { + /* PLL Clock Table */ + { IMX219_REG_VTPXCK_DIV, 5 }, + { IMX219_REG_VTSYCK_DIV, 1 }, + { IMX219_REG_PREPLLCK_VT_DIV, 3 }, /* 0x03 = AUTO set */ + { IMX219_REG_PREPLLCK_OP_DIV, 3 }, /* 0x03 = AUTO set */ + { IMX219_REG_PLL_VT_MPY, 88 }, + { IMX219_REG_OPSYCK_DIV, 1 }, + { IMX219_REG_PLL_OP_MPY, 91 }, + + /* 4-Lane CSI Mode */ + { IMX219_REG_CSI_LANE_MODE, IMX219_CSI_4_LANE_MODE }, +}; + static const s64 imx219_link_freq_menu[] = { IMX219_DEFAULT_LINK_FREQ, };
static const s64 imx219_link_freq_4lane_menu[] = { IMX219_DEFAULT_LINK_FREQ_4LANE, + /* + * This will never be advertised to userspace, but will be used for + * v4l2_link_freq_to_bitmap + */ + IMX219_DEFAULT_LINK_FREQ_4LANE_UNSUPPORTED, };
static const char * const imx219_test_pattern_menu[] = { @@ -662,9 +687,11 @@ static int imx219_set_framefmt(struct imx219 *imx219,
static int imx219_configure_lanes(struct imx219 *imx219) { - return cci_write(imx219->regmap, IMX219_REG_CSI_LANE_MODE, - imx219->lanes == 2 ? IMX219_CSI_2_LANE_MODE : - IMX219_CSI_4_LANE_MODE, NULL); + /* Write the appropriate PLL settings for the number of MIPI lanes */ + return cci_multi_reg_write(imx219->regmap, + imx219->lanes == 2 ? imx219_2lane_regs : imx219_4lane_regs, + imx219->lanes == 2 ? ARRAY_SIZE(imx219_2lane_regs) : + ARRAY_SIZE(imx219_4lane_regs), NULL); };
static int imx219_start_streaming(struct imx219 *imx219, @@ -1035,6 +1062,7 @@ static int imx219_check_hwcfg(struct device *dev, struct imx219 *imx219) struct v4l2_fwnode_endpoint ep_cfg = { .bus_type = V4L2_MBUS_CSI2_DPHY }; + unsigned long link_freq_bitmap; int ret = -EINVAL;
endpoint = fwnode_graph_get_next_endpoint(dev_fwnode(dev), NULL); @@ -1056,23 +1084,40 @@ static int imx219_check_hwcfg(struct device *dev, struct imx219 *imx219) imx219->lanes = ep_cfg.bus.mipi_csi2.num_data_lanes;
/* Check the link frequency set in device tree */ - if (!ep_cfg.nr_of_link_frequencies) { - dev_err_probe(dev, -EINVAL, - "link-frequency property not found in DT\n"); - goto error_out; + switch (imx219->lanes) { + case 2: + ret = v4l2_link_freq_to_bitmap(dev, + ep_cfg.link_frequencies, + ep_cfg.nr_of_link_frequencies, + imx219_link_freq_menu, + ARRAY_SIZE(imx219_link_freq_menu), + &link_freq_bitmap); + break; + case 4: + ret = v4l2_link_freq_to_bitmap(dev, + ep_cfg.link_frequencies, + ep_cfg.nr_of_link_frequencies, + imx219_link_freq_4lane_menu, + ARRAY_SIZE(imx219_link_freq_4lane_menu), + &link_freq_bitmap); + + if (!ret && (link_freq_bitmap & BIT(1))) { + dev_warn(dev, "Link frequency of %d not supported, but has been incorrectly advertised previously\n", + IMX219_DEFAULT_LINK_FREQ_4LANE_UNSUPPORTED); + dev_warn(dev, "Using link frequency of %d\n", + IMX219_DEFAULT_LINK_FREQ_4LANE); + link_freq_bitmap |= BIT(0); + } + break; }
- if (ep_cfg.nr_of_link_frequencies != 1 || - (ep_cfg.link_frequencies[0] != ((imx219->lanes == 2) ? - IMX219_DEFAULT_LINK_FREQ : IMX219_DEFAULT_LINK_FREQ_4LANE))) { + if (ret || !(link_freq_bitmap & BIT(0))) { + ret = -EINVAL; dev_err_probe(dev, -EINVAL, "Link frequency not supported: %lld\n", ep_cfg.link_frequencies[0]); - goto error_out; }
- ret = 0; - error_out: v4l2_fwnode_endpoint_free(&ep_cfg); fwnode_handle_put(endpoint);