From: Martin Fuzzey martin.fuzzey@flowbird.group
commit 9b14ed6e11b72dd4806535449ca6c6962cb2369d upstream.
When BT coexistence is enabled (eg oper mode 13, which is the default) the initialisation on startup sometimes silently fails.
In a normal initialisation we see usb 1-1.3: Product: Wireless USB Network Module usb 1-1.3: Manufacturer: Redpine Signals, Inc. usb 1-1.3: SerialNumber: 000000000001 rsi_91x: rsi_probe: Initialized os intf ops rsi_91x: rsi_load_9116_firmware: Loading chunk 0 rsi_91x: rsi_load_9116_firmware: Loading chunk 1 rsi_91x: rsi_load_9116_firmware: Loading chunk 2 rsi_91x: Max Stations Allowed = 1
But sometimes the last log is missing and the wlan net device is not created.
Running a userspace loop that resets the hardware via a GPIO shows the problem occurring ~5/100 resets.
The problem does not occur in oper mode 1 (wifi only).
Adding logs shows that the initialisation state machine requests a MAC reset via rsi_send_reset_mac() but the firmware does not reply, leading to the initialisation sequence being incomplete.
Fix this by delaying attaching the BT adapter until the wifi initialisation has completed.
With this applied I have done > 300 reset loops with no errors.
Fixes: 716b840c7641 ("rsi: handle BT traffic in driver") Signed-off-by: Martin Fuzzey martin.fuzzey@flowbird.group CC: stable@vger.kernel.org Signed-off-by: Kalle Valo kvalo@codeaurora.org Link: https://lore.kernel.org/r/1630337206-12410-2-git-send-email-martin.fuzzey@fl... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/wireless/rsi/rsi_91x_main.c | 16 +++++++++++++--- drivers/net/wireless/rsi/rsi_91x_mgmt.c | 3 +++ drivers/net/wireless/rsi/rsi_main.h | 2 ++ 3 files changed, 18 insertions(+), 3 deletions(-)
--- a/drivers/net/wireless/rsi/rsi_91x_main.c +++ b/drivers/net/wireless/rsi/rsi_91x_main.c @@ -216,9 +216,10 @@ int rsi_read_pkt(struct rsi_common *comm bt_pkt_type = frame_desc[offset + BT_RX_PKT_TYPE_OFST]; if (bt_pkt_type == BT_CARD_READY_IND) { rsi_dbg(INFO_ZONE, "BT Card ready recvd\n"); - if (rsi_bt_ops.attach(common, &g_proto_ops)) - rsi_dbg(ERR_ZONE, - "Failed to attach BT module\n"); + if (common->fsm_state == FSM_MAC_INIT_DONE) + rsi_attach_bt(common); + else + common->bt_defer_attach = true; } else { if (common->bt_adapter) rsi_bt_ops.recv_pkt(common->bt_adapter, @@ -283,6 +284,15 @@ void rsi_set_bt_context(void *priv, void } #endif
+void rsi_attach_bt(struct rsi_common *common) +{ +#ifdef CONFIG_RSI_COEX + if (rsi_bt_ops.attach(common, &g_proto_ops)) + rsi_dbg(ERR_ZONE, + "Failed to attach BT module\n"); +#endif +} + /** * rsi_91x_init() - This function initializes os interface operations. * @void: Void. --- a/drivers/net/wireless/rsi/rsi_91x_mgmt.c +++ b/drivers/net/wireless/rsi/rsi_91x_mgmt.c @@ -1761,6 +1761,9 @@ static int rsi_handle_ta_confirm_type(st if (common->reinit_hw) { complete(&common->wlan_init_completion); } else { + if (common->bt_defer_attach) + rsi_attach_bt(common); + return rsi_mac80211_attach(common); } } --- a/drivers/net/wireless/rsi/rsi_main.h +++ b/drivers/net/wireless/rsi/rsi_main.h @@ -287,6 +287,7 @@ struct rsi_common { struct ieee80211_vif *roc_vif;
bool eapol4_confirm; + bool bt_defer_attach; void *bt_adapter; };
@@ -361,5 +362,6 @@ struct rsi_host_intf_ops {
enum rsi_host_intf rsi_get_host_intf(void *priv); void rsi_set_bt_context(void *priv, void *bt_context); +void rsi_attach_bt(struct rsi_common *common);
#endif