On Wed, 12 Apr 2023, Johan Hovold wrote:
The RS485 multipoint addressing support for some reason added a new ADDRB termios cflag which is (only!) updated from one of the RS485 ioctls.
Make sure to take the termios rw semaphore for the right ioctl (i.e. set, not get).
Fixes: ae50bb275283 ("serial: take termios_rwsem for ->rs485_config() & pass termios as param") Cc: stable@vger.kernel.org # 6.0 Cc: Ilpo Järvinen ilpo.jarvinen@linux.intel.com Signed-off-by: Johan Hovold johan@kernel.org
I did not have time to review the multipoint addressing patches at the time and only skimmed the archives now, but I can't seem to find any motivation for why a precious termios bit was seemingly wasted on ADDRB when it is only updated from the RS485 ioctls.
I hope it wasn't done just to simplify the implementation of tty_get_frame_size()? Or was it a left-over from the RFC which apparently actually used termios to enable this feature?
No. I made it intentionally. It felt natural place for storing it because ADDRB does impact the wire format and cflag is where other wire-format impacting bits are also stored.
Should we consider dropping the Linux-specific ADDRB bit again?
Johan
drivers/tty/serial/serial_core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 2bd32c8ece39..728cb72be066 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -1552,7 +1552,7 @@ uart_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) goto out; /* rs485_config requires more locking than others */
- if (cmd == TIOCGRS485)
- if (cmd == TIOCSRS485) down_write(&tty->termios_rwsem);
mutex_lock(&port->mutex); @@ -1595,7 +1595,7 @@ uart_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) } out_up: mutex_unlock(&port->mutex);
- if (cmd == TIOCGRS485)
- if (cmd == TIOCSRS485) up_write(&tty->termios_rwsem);
out: return ret;
Indeed, the caps are so blinding.
Reviewed-by: Ilpo Järvinen ilpo.jarvinen@linux.intel.com