From: Kai-Heng Feng kai.heng.feng@canonical.com
commit 7529b2574a7aaf902f1f8159fbc2a7caa74be559 upstream.
Use new helpers to make LPM enabling/disabling more clear.
This is a preparation to subsequent patch.
Signed-off-by: Kai-Heng Feng kai.heng.feng@canonical.com Cc: stable stable@vger.kernel.org # after much soaking Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/usb/core/driver.c | 12 +++++++++++- drivers/usb/core/hub.c | 12 ++++++------ drivers/usb/core/message.c | 2 +- drivers/usb/core/sysfs.c | 5 ++++- drivers/usb/core/usb.h | 10 ++++++++-- 5 files changed, 30 insertions(+), 11 deletions(-)
--- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -1896,7 +1896,7 @@ int usb_runtime_idle(struct device *dev) return -EBUSY; }
-int usb_set_usb2_hardware_lpm(struct usb_device *udev, int enable) +static int usb_set_usb2_hardware_lpm(struct usb_device *udev, int enable) { struct usb_hcd *hcd = bus_to_hcd(udev->bus); int ret = -EPERM; @@ -1913,6 +1913,16 @@ int usb_set_usb2_hardware_lpm(struct usb return ret; }
+int usb_enable_usb2_hardware_lpm(struct usb_device *udev) +{ + return usb_set_usb2_hardware_lpm(udev, 1); +} + +int usb_disable_usb2_hardware_lpm(struct usb_device *udev) +{ + return usb_set_usb2_hardware_lpm(udev, 0); +} + #endif /* CONFIG_PM */
struct bus_type usb_bus_type = { --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -3221,7 +3221,7 @@ int usb_port_suspend(struct usb_device *
/* disable USB2 hardware LPM */ if (udev->usb2_hw_lpm_enabled == 1) - usb_set_usb2_hardware_lpm(udev, 0); + usb_disable_usb2_hardware_lpm(udev);
if (usb_disable_ltm(udev)) { dev_err(&udev->dev, "Failed to disable LTM before suspend\n"); @@ -3260,7 +3260,7 @@ int usb_port_suspend(struct usb_device * err_ltm: /* Try to enable USB2 hardware LPM again */ if (udev->usb2_hw_lpm_capable == 1) - usb_set_usb2_hardware_lpm(udev, 1); + usb_enable_usb2_hardware_lpm(udev);
if (udev->do_remote_wakeup) (void) usb_disable_remote_wakeup(udev); @@ -3544,7 +3544,7 @@ int usb_port_resume(struct usb_device *u } else { /* Try to enable USB2 hardware LPM */ if (udev->usb2_hw_lpm_capable == 1) - usb_set_usb2_hardware_lpm(udev, 1); + usb_enable_usb2_hardware_lpm(udev);
/* Try to enable USB3 LTM */ usb_enable_ltm(udev); @@ -4435,7 +4435,7 @@ static void hub_set_initial_usb2_lpm_pol if ((udev->bos->ext_cap->bmAttributes & cpu_to_le32(USB_BESL_SUPPORT)) || connect_type == USB_PORT_CONNECT_TYPE_HARD_WIRED) { udev->usb2_hw_lpm_allowed = 1; - usb_set_usb2_hardware_lpm(udev, 1); + usb_enable_usb2_hardware_lpm(udev); } }
@@ -5650,7 +5650,7 @@ static int usb_reset_and_verify_device(s * It will be re-enabled by the enumeration process. */ if (udev->usb2_hw_lpm_enabled == 1) - usb_set_usb2_hardware_lpm(udev, 0); + usb_disable_usb2_hardware_lpm(udev);
/* Disable LPM while we reset the device and reinstall the alt settings. * Device-initiated LPM, and system exit latency settings are cleared @@ -5753,7 +5753,7 @@ static int usb_reset_and_verify_device(s
done: /* Now that the alt settings are re-installed, enable LTM and LPM. */ - usb_set_usb2_hardware_lpm(udev, 1); + usb_enable_usb2_hardware_lpm(udev); usb_unlocked_enable_lpm(udev); usb_enable_ltm(udev); usb_release_bos_descriptor(udev); --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1244,7 +1244,7 @@ void usb_disable_device(struct usb_devic }
if (dev->usb2_hw_lpm_enabled == 1) - usb_set_usb2_hardware_lpm(dev, 0); + usb_disable_usb2_hardware_lpm(dev); usb_unlocked_disable_lpm(dev); usb_disable_ltm(dev);
--- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -528,7 +528,10 @@ static ssize_t usb2_hardware_lpm_store(s
if (!ret) { udev->usb2_hw_lpm_allowed = value; - ret = usb_set_usb2_hardware_lpm(udev, value); + if (value) + ret = usb_enable_usb2_hardware_lpm(udev); + else + ret = usb_disable_usb2_hardware_lpm(udev); }
usb_unlock_device(udev); --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -92,7 +92,8 @@ extern int usb_remote_wakeup(struct usb_ extern int usb_runtime_suspend(struct device *dev); extern int usb_runtime_resume(struct device *dev); extern int usb_runtime_idle(struct device *dev); -extern int usb_set_usb2_hardware_lpm(struct usb_device *udev, int enable); +extern int usb_enable_usb2_hardware_lpm(struct usb_device *udev); +extern int usb_disable_usb2_hardware_lpm(struct usb_device *udev);
#else
@@ -112,7 +113,12 @@ static inline int usb_autoresume_device( return 0; }
-static inline int usb_set_usb2_hardware_lpm(struct usb_device *udev, int enable) +static inline int usb_enable_usb2_hardware_lpm(struct usb_device *udev) +{ + return 0; +} + +static inline int usb_disable_usb2_hardware_lpm(struct usb_device *udev) { return 0; }