From: Eugeniu Rosca erosca@de.adit-jv.com
[ Upstream commit c91843463e9e821dc3b48fe37e3155fa38299f6e ]
Isolated initially to renesas_sdhi_internal_dmac [1], Ulf suggested adding MMC_CAP_ERASE to the TMIO mmc core:
On Fri, Nov 15, 2019 at 10:27:25AM +0100, Ulf Hansson wrote: -- snip -- This test and due to the discussions with Wolfram and you in this thread, I would actually suggest that you enable MMC_CAP_ERASE for all tmio variants, rather than just for this particular one.
In other words, set the cap in tmio_mmc_host_probe() should be fine, as it seems none of the tmio variants supports HW busy detection at this point. -- snip --
Testing on R-Car H3ULCB-KF doesn't reveal any issues (v5.4-rc7):
root@rcar-gen3:~# lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT mmcblk0 179:0 0 59.2G 0 disk <--- eMMC mmcblk0boot0 179:8 0 4M 1 disk mmcblk0boot1 179:16 0 4M 1 disk mmcblk1 179:24 0 30G 0 disk <--- SD card
root@rcar-gen3:~# time blkdiscard /dev/mmcblk0 real 0m8.659s user 0m0.001s sys 0m1.920s
root@rcar-gen3:~# time blkdiscard /dev/mmcblk1 real 0m1.176s user 0m0.001s sys 0m0.124s
[1] https://lore.kernel.org/linux-renesas-soc/20191112134808.23546-1-erosca@de.a...
Cc: Wolfram Sang wsa+renesas@sang-engineering.com Cc: Masahiro Yamada yamada.masahiro@socionext.com Cc: Andrew Gabbasov andrew_gabbasov@mentor.com Originally-by: Harish Jenny K N harish_kandiga@mentor.com Suggested-by: Ulf Hansson ulf.hansson@linaro.org Signed-off-by: Eugeniu Rosca erosca@de.adit-jv.com Reviewed-by: Wolfram Sang wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson ulf.hansson@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mmc/host/tmio_mmc_pio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c index 0fc1f73b0d23..3e025766181b 100644 --- a/drivers/mmc/host/tmio_mmc_pio.c +++ b/drivers/mmc/host/tmio_mmc_pio.c @@ -1076,7 +1076,7 @@ int tmio_mmc_host_probe(struct tmio_mmc_host *_host, tmio_mmc_ops.start_signal_voltage_switch = _host->start_signal_voltage_switch; mmc->ops = &tmio_mmc_ops;
- mmc->caps |= MMC_CAP_4_BIT_DATA | pdata->capabilities; + mmc->caps |= MMC_CAP_ERASE | MMC_CAP_4_BIT_DATA | pdata->capabilities; mmc->caps2 |= pdata->capabilities2; mmc->max_segs = 32; mmc->max_blk_size = 512;