From: Linus Torvalds torvalds@linux-foundation.org
[ Upstream commit 6bd23e0c2bb6c65d4f5754d1456bc9a4427fc59b ]
... and use it to limit the virtual terminals to just N_TTY. They are kind of special, and in particular, the "con_write()" routine violates the "writes cannot sleep" rule that some ldiscs rely on.
This avoids the
BUG: sleeping function called from invalid context at kernel/printk/printk.c:2659
when N_GSM has been attached to a virtual console, and gsmld_write() calls con_write() while holding a spinlock, and con_write() then tries to get the console lock.
Tested-by: Tetsuo Handa penguin-kernel@i-love.sakura.ne.jp Cc: Jiri Slaby jirislaby@kernel.org Cc: Andrew Morton akpm@linux-foundation.org Cc: Daniel Starke daniel.starke@siemens.com Reported-by: syzbot syzbot+dbac96d8e73b61aa559c@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=dbac96d8e73b61aa559c Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Link: https://lore.kernel.org/r/20240423163339.59780-1-torvalds@linux-foundation.o... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org [Minor conflict resolved due to code context change. And also backport description comments for struct tty_operations.] Signed-off-by: Jianqi Ren jianqi.ren.cn@windriver.com Signed-off-by: He Zhe zhe.he@windriver.com --- Verified the build test --- drivers/tty/tty_ldisc.c | 6 + drivers/tty/vt/vt.c | 10 ++ include/linux/tty_driver.h | 339 +++++++++++++++++++++++++++++++++++++ 3 files changed, 355 insertions(+)
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c index 7262f45b513b..0dae579efdd9 100644 --- a/drivers/tty/tty_ldisc.c +++ b/drivers/tty/tty_ldisc.c @@ -579,6 +579,12 @@ int tty_set_ldisc(struct tty_struct *tty, int disc) goto out; }
+ if (tty->ops->ldisc_ok) { + retval = tty->ops->ldisc_ok(tty, disc); + if (retval) + goto out; + } + old_ldisc = tty->ldisc;
/* Shutdown the old discipline. */ diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index 5d9de3a53548..a772c614a878 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -3448,6 +3448,15 @@ static void con_cleanup(struct tty_struct *tty) tty_port_put(&vc->port); }
+/* + * We can't deal with anything but the N_TTY ldisc, + * because we can sleep in our write() routine. + */ +static int con_ldisc_ok(struct tty_struct *tty, int ldisc) +{ + return ldisc == N_TTY ? 0 : -EINVAL; +} + static int default_color = 7; /* white */ static int default_italic_color = 2; // green (ASCII) static int default_underline_color = 3; // cyan (ASCII) @@ -3576,6 +3585,7 @@ static const struct tty_operations con_ops = { .resize = vt_resize, .shutdown = con_shutdown, .cleanup = con_cleanup, + .ldisc_ok = con_ldisc_ok, };
static struct cdev vc0_cdev; diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h index 2f719b471d52..3412eb7280da 100644 --- a/include/linux/tty_driver.h +++ b/include/linux/tty_driver.h @@ -243,6 +243,344 @@ struct tty_driver; struct serial_icounter_struct; struct serial_struct;
+/** + * struct tty_operations -- interface between driver and tty + * + * @lookup: ``struct tty_struct *()(struct tty_driver *self, struct file *, + * int idx)`` + * + * Return the tty device corresponding to @idx, %NULL if there is not + * one currently in use and an %ERR_PTR value on error. Called under + * %tty_mutex (for now!) + * + * Optional method. Default behaviour is to use the @self->ttys array. + * + * @install: ``int ()(struct tty_driver *self, struct tty_struct *tty)`` + * + * Install a new @tty into the @self's internal tables. Used in + * conjunction with @lookup and @remove methods. + * + * Optional method. Default behaviour is to use the @self->ttys array. + * + * @remove: ``void ()(struct tty_driver *self, struct tty_struct *tty)`` + * + * Remove a closed @tty from the @self's internal tables. Used in + * conjunction with @lookup and @remove methods. + * + * Optional method. Default behaviour is to use the @self->ttys array. + * + * @open: ``int ()(struct tty_struct *tty, struct file *)`` + * + * This routine is called when a particular @tty device is opened. This + * routine is mandatory; if this routine is not filled in, the attempted + * open will fail with %ENODEV. + * + * Required method. Called with tty lock held. May sleep. + * + * @close: ``void ()(struct tty_struct *tty, struct file *)`` + * + * This routine is called when a particular @tty device is closed. At the + * point of return from this call the driver must make no further ldisc + * calls of any kind. + * + * Remark: called even if the corresponding @open() failed. + * + * Required method. Called with tty lock held. May sleep. + * + * @shutdown: ``void ()(struct tty_struct *tty)`` + * + * This routine is called under the tty lock when a particular @tty device + * is closed for the last time. It executes before the @tty resources + * are freed so may execute while another function holds a @tty kref. + * + * @cleanup: ``void ()(struct tty_struct *tty)`` + * + * This routine is called asynchronously when a particular @tty device + * is closed for the last time freeing up the resources. This is + * actually the second part of shutdown for routines that might sleep. + * + * @write: ``int ()(struct tty_struct *tty, const unsigned char *buf, + * int count)`` + * + * This routine is called by the kernel to write a series (@count) of + * characters (@buf) to the @tty device. The characters may come from + * user space or kernel space. This routine will return the + * number of characters actually accepted for writing. + * + * May occur in parallel in special cases. Because this includes panic + * paths drivers generally shouldn't try and do clever locking here. + * + * Optional: Required for writable devices. May not sleep. + * + * @put_char: ``int ()(struct tty_struct *tty, unsigned char ch)`` + * + * This routine is called by the kernel to write a single character @ch to + * the @tty device. If the kernel uses this routine, it must call the + * @flush_chars() routine (if defined) when it is done stuffing characters + * into the driver. If there is no room in the queue, the character is + * ignored. + * + * Optional: Kernel will use the @write method if not provided. Do not + * call this function directly, call tty_put_char(). + * + * @flush_chars: ``void ()(struct tty_struct *tty)`` + * + * This routine is called by the kernel after it has written a + * series of characters to the tty device using @put_char(). + * + * Optional. Do not call this function directly, call + * tty_driver_flush_chars(). + * + * @write_room: ``int ()(struct tty_struct *tty)`` + * + * This routine returns the numbers of characters the @tty driver + * will accept for queuing to be written. This number is subject + * to change as output buffers get emptied, or if the output flow + * control is acted. + * + * The ldisc is responsible for being intelligent about multi-threading of + * write_room/write calls + * + * Required if @write method is provided else not needed. Do not call this + * function directly, call tty_write_room() + * + * @chars_in_buffer: ``int ()(struct tty_struct *tty)`` + * + * This routine returns the number of characters in the device private + * output queue. Used in tty_wait_until_sent() and for poll() + * implementation. + * + * Optional: if not provided, it is assumed there is no queue on the + * device. Do not call this function directly, call tty_chars_in_buffer(). + * + * @ioctl: ``int ()(struct tty_struct *tty, unsigned int cmd, + * unsigned long arg)`` + * + * This routine allows the @tty driver to implement device-specific + * ioctls. If the ioctl number passed in @cmd is not recognized by the + * driver, it should return %ENOIOCTLCMD. + * + * Optional. + * + * @compat_ioctl: ``long ()(struct tty_struct *tty, unsigned int cmd, + * unsigned long arg)`` + * + * Implement ioctl processing for 32 bit process on 64 bit system. + * + * Optional. + * + * @set_termios: ``void ()(struct tty_struct *tty, struct ktermios *old)`` + * + * This routine allows the @tty driver to be notified when device's + * termios settings have changed. New settings are in @tty->termios. + * Previous settings are passed in the @old argument. + * + * The API is defined such that the driver should return the actual modes + * selected. This means that the driver is responsible for modifying any + * bits in @tty->termios it cannot fulfill to indicate the actual modes + * being used. + * + * Optional. Called under the @tty->termios_rwsem. May sleep. + * + * @ldisc_ok: ``int ()(struct tty_struct *tty, int ldisc)`` + * + * This routine allows the @tty driver to decide if it can deal + * with a particular @ldisc. + * + * Optional. Called under the @tty->ldisc_sem and @tty->termios_rwsem. + * + * @set_ldisc: ``void ()(struct tty_struct *tty)`` + * + * This routine allows the @tty driver to be notified when the device's + * line discipline is being changed. At the point this is done the + * discipline is not yet usable. + * + * Optional. Called under the @tty->ldisc_sem and @tty->termios_rwsem. + * + * @throttle: ``void ()(struct tty_struct *tty)`` + * + * This routine notifies the @tty driver that input buffers for the line + * discipline are close to full, and it should somehow signal that no more + * characters should be sent to the @tty. + * + * Serialization including with @unthrottle() is the job of the ldisc + * layer. + * + * Optional: Always invoke via tty_throttle_safe(). Called under the + * @tty->termios_rwsem. + * + * @unthrottle: ``void ()(struct tty_struct *tty)`` + * + * This routine notifies the @tty driver that it should signal that + * characters can now be sent to the @tty without fear of overrunning the + * input buffers of the line disciplines. + * + * Optional. Always invoke via tty_unthrottle(). Called under the + * @tty->termios_rwsem. + * + * @stop: ``void ()(struct tty_struct *tty)`` + * + * This routine notifies the @tty driver that it should stop outputting + * characters to the tty device. + * + * Called with @tty->flow.lock held. Serialized with @start() method. + * + * Optional. Always invoke via stop_tty(). + * + * @start: ``void ()(struct tty_struct *tty)`` + * + * This routine notifies the @tty driver that it resumed sending + * characters to the @tty device. + * + * Called with @tty->flow.lock held. Serialized with stop() method. + * + * Optional. Always invoke via start_tty(). + * + * @hangup: ``void ()(struct tty_struct *tty)`` + * + * This routine notifies the @tty driver that it should hang up the @tty + * device. + * + * Optional. Called with tty lock held. + * + * @break_ctl: ``int ()(struct tty_struct *tty, int state)`` + * + * This optional routine requests the @tty driver to turn on or off BREAK + * status on the RS-232 port. If @state is -1, then the BREAK status + * should be turned on; if @state is 0, then BREAK should be turned off. + * + * If this routine is implemented, the high-level tty driver will handle + * the following ioctls: %TCSBRK, %TCSBRKP, %TIOCSBRK, %TIOCCBRK. + * + * If the driver sets %TTY_DRIVER_HARDWARE_BREAK in tty_alloc_driver(), + * then the interface will also be called with actual times and the + * hardware is expected to do the delay work itself. 0 and -1 are still + * used for on/off. + * + * Optional: Required for %TCSBRK/%BRKP/etc. handling. May sleep. + * + * @flush_buffer: ``void ()(struct tty_struct *tty)`` + * + * This routine discards device private output buffer. Invoked on close, + * hangup, to implement %TCOFLUSH ioctl and similar. + * + * Optional: if not provided, it is assumed there is no queue on the + * device. Do not call this function directly, call + * tty_driver_flush_buffer(). + * + * @wait_until_sent: ``void ()(struct tty_struct *tty, int timeout)`` + * + * This routine waits until the device has written out all of the + * characters in its transmitter FIFO. Or until @timeout (in jiffies) is + * reached. + * + * Optional: If not provided, the device is assumed to have no FIFO. + * Usually correct to invoke via tty_wait_until_sent(). May sleep. + * + * @send_xchar: ``void ()(struct tty_struct *tty, char ch)`` + * + * This routine is used to send a high-priority XON/XOFF character (@ch) + * to the @tty device. + * + * Optional: If not provided, then the @write method is called under + * the @tty->atomic_write_lock to keep it serialized with the ldisc. + * + * @tiocmget: ``int ()(struct tty_struct *tty)`` + * + * This routine is used to obtain the modem status bits from the @tty + * driver. + * + * Optional: If not provided, then %ENOTTY is returned from the %TIOCMGET + * ioctl. Do not call this function directly, call tty_tiocmget(). + * + * @tiocmset: ``int ()(struct tty_struct *tty, + * unsigned int set, unsigned int clear)`` + * + * This routine is used to set the modem status bits to the @tty driver. + * First, @clear bits should be cleared, then @set bits set. + * + * Optional: If not provided, then %ENOTTY is returned from the %TIOCMSET + * ioctl. Do not call this function directly, call tty_tiocmset(). + * + * @resize: ``int ()(struct tty_struct *tty, struct winsize *ws)`` + * + * Called when a termios request is issued which changes the requested + * terminal geometry to @ws. + * + * Optional: the default action is to update the termios structure + * without error. This is usually the correct behaviour. Drivers should + * not force errors here if they are not resizable objects (e.g. a serial + * line). See tty_do_resize() if you need to wrap the standard method + * in your own logic -- the usual case. + * + * @get_icount: ``int ()(struct tty_struct *tty, + * struct serial_icounter *icount)`` + * + * Called when the @tty device receives a %TIOCGICOUNT ioctl. Passed a + * kernel structure @icount to complete. + * + * Optional: called only if provided, otherwise %ENOTTY will be returned. + * + * @get_serial: ``int ()(struct tty_struct *tty, struct serial_struct *p)`` + * + * Called when the @tty device receives a %TIOCGSERIAL ioctl. Passed a + * kernel structure @p (&struct serial_struct) to complete. + * + * Optional: called only if provided, otherwise %ENOTTY will be returned. + * Do not call this function directly, call tty_tiocgserial(). + * + * @set_serial: ``int ()(struct tty_struct *tty, struct serial_struct *p)`` + * + * Called when the @tty device receives a %TIOCSSERIAL ioctl. Passed a + * kernel structure @p (&struct serial_struct) to set the values from. + * + * Optional: called only if provided, otherwise %ENOTTY will be returned. + * Do not call this function directly, call tty_tiocsserial(). + * + * @show_fdinfo: ``void ()(struct tty_struct *tty, struct seq_file *m)`` + * + * Called when the @tty device file descriptor receives a fdinfo request + * from VFS (to show in /proc/<pid>/fdinfo/). @m should be filled with + * information. + * + * Optional: called only if provided, otherwise nothing is written to @m. + * Do not call this function directly, call tty_show_fdinfo(). + * + * @poll_init: ``int ()(struct tty_driver *driver, int line, char *options)`` + * + * kgdboc support (Documentation/dev-tools/kgdb.rst). This routine is + * called to initialize the HW for later use by calling @poll_get_char or + * @poll_put_char. + * + * Optional: called only if provided, otherwise skipped as a non-polling + * driver. + * + * @poll_get_char: ``int ()(struct tty_driver *driver, int line)`` + * + * kgdboc support (see @poll_init). @driver should read a character from a + * tty identified by @line and return it. + * + * Optional: called only if @poll_init provided. + * + * @poll_put_char: ``void ()(struct tty_driver *driver, int line, char ch)`` + * + * kgdboc support (see @poll_init). @driver should write character @ch to + * a tty identified by @line. + * + * Optional: called only if @poll_init provided. + * + * @proc_show: ``int ()(struct seq_file *m, void *driver)`` + * + * Driver @driver (cast to &struct tty_driver) can show additional info in + * /proc/tty/driver/<driver_name>. It is enough to fill in the information + * into @m. + * + * Optional: called only if provided, otherwise no /proc entry created. + * + * This structure defines the interface between the low-level tty driver and + * the tty routines. These routines can be defined. Unless noted otherwise, + * they are optional, and can be filled in with a %NULL pointer. + */ struct tty_operations { struct tty_struct * (*lookup)(struct tty_driver *driver, struct file *filp, int idx); @@ -270,6 +608,7 @@ struct tty_operations { void (*hangup)(struct tty_struct *tty); int (*break_ctl)(struct tty_struct *tty, int state); void (*flush_buffer)(struct tty_struct *tty); + int (*ldisc_ok)(struct tty_struct *tty, int ldisc); void (*set_ldisc)(struct tty_struct *tty); void (*wait_until_sent)(struct tty_struct *tty, int timeout); void (*send_xchar)(struct tty_struct *tty, char ch);