From: Kuogee Hsieh khsieh@codeaurora.org
commit d9aa6571b28ba0022de1e48801ff03a1854c7ef2 upstream.
Link status is different from display connected status in the case of something like an Apple dongle where the type-c plug can be connected, and therefore the link is connected, but no sink is connected until an HDMI cable is plugged into the dongle. The sink_count of DPCD of dongle will increase to 1 once an HDMI cable is plugged into the dongle so that display connected status will become true. This checking also apply at pm_resume.
Changes in v4: -- none
Fixes: 94e58e2d06e3 ("drm/msm/dp: reset dp controller only at boot up and pm_resume") Reported-by: Stephen Boyd swboyd@chromium.org Reviewed-by: Stephen Boyd swboyd@chromium.org Tested-by: Stephen Boyd swboyd@chromium.org Signed-off-by: Kuogee Hsieh khsieh@codeaurora.org Fixes: 8ede2ecc3e5e ("drm/msm/dp: Add DP compliance tests on Snapdragon Chipsets") Link: https://lore.kernel.org/r/1619048258-8717-2-git-send-email-khsieh@codeaurora... Signed-off-by: Rob Clark robdclark@chromium.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/gpu/drm/msm/dp/dp_display.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-)
--- a/drivers/gpu/drm/msm/dp/dp_display.c +++ b/drivers/gpu/drm/msm/dp/dp_display.c @@ -595,10 +595,8 @@ static int dp_connect_pending_timeout(st mutex_lock(&dp->event_mutex);
state = dp->hpd_state; - if (state == ST_CONNECT_PENDING) { - dp_display_enable(dp, 0); + if (state == ST_CONNECT_PENDING) dp->hpd_state = ST_CONNECTED; - }
mutex_unlock(&dp->event_mutex);
@@ -677,10 +675,8 @@ static int dp_disconnect_pending_timeout mutex_lock(&dp->event_mutex);
state = dp->hpd_state; - if (state == ST_DISCONNECT_PENDING) { - dp_display_disable(dp, 0); + if (state == ST_DISCONNECT_PENDING) dp->hpd_state = ST_DISCONNECTED; - }
mutex_unlock(&dp->event_mutex);
@@ -1272,7 +1268,12 @@ static int dp_pm_resume(struct device *d
status = dp_catalog_link_is_connected(dp->catalog);
- if (status) + /* + * can not declared display is connected unless + * HDMI cable is plugged in and sink_count of + * dongle become 1 + */ + if (status && dp->link->sink_count) dp->dp_display.is_connected = true; else dp->dp_display.is_connected = false;