From: Sebastian Andrzej Siewior bigeasy@linutronix.de
[ Upstream commit 6f3fde684d0232e66ada3410f016a58e09a87689 ]
The USB completion callback does not disable interrupts while acquiring the lock. We want to remove the local_irq_disable() invocation from __usb_hcd_giveback_urb() and therefore it is required for the callback handler to disable the interrupts while acquiring the lock. The callback may be invoked either in IRQ or BH context depending on the USB host controller. Use the _irqsave() variant of the locking primitives.
Cc: Greg Kroah-Hartman gregkh@linuxfoundation.org Acked-by: Alan Stern stern@rowland.harvard.edu Signed-off-by: Sebastian Andrzej Siewior bigeasy@linutronix.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- drivers/usb/misc/usbtest.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c index bc92a498ec03..4632a29d5403 100644 --- a/drivers/usb/misc/usbtest.c +++ b/drivers/usb/misc/usbtest.c @@ -1053,11 +1053,12 @@ static void ctrl_complete(struct urb *urb) struct usb_ctrlrequest *reqp; struct subcase *subcase; int status = urb->status; + unsigned long flags;
reqp = (struct usb_ctrlrequest *)urb->setup_packet; subcase = container_of(reqp, struct subcase, setup);
- spin_lock(&ctx->lock); + spin_lock_irqsave(&ctx->lock, flags); ctx->count--; ctx->pending--;
@@ -1156,7 +1157,7 @@ static void ctrl_complete(struct urb *urb) /* signal completion when nothing's queued */ if (ctx->pending == 0) complete(&ctx->complete); - spin_unlock(&ctx->lock); + spin_unlock_irqrestore(&ctx->lock, flags); }
static int @@ -1832,8 +1833,9 @@ struct transfer_context { static void complicated_callback(struct urb *urb) { struct transfer_context *ctx = urb->context; + unsigned long flags;
- spin_lock(&ctx->lock); + spin_lock_irqsave(&ctx->lock, flags); ctx->count--;
ctx->packet_count += urb->number_of_packets; @@ -1873,7 +1875,7 @@ static void complicated_callback(struct urb *urb) complete(&ctx->done); } done: - spin_unlock(&ctx->lock); + spin_unlock_irqrestore(&ctx->lock, flags); }
static struct urb *iso_alloc_urb(
From: Miao Zhong zhongmiao@hisilicon.com
[ Upstream commit 0d535967ac658966c6ade8f82b5799092f7d5441 ]
When PRI queue occurs overflow, driver should update the OVACKFLG to the PRIQ consumer register, otherwise subsequent PRI requests will not be processed.
Cc: Will Deacon will.deacon@arm.com Cc: Robin Murphy robin.murphy@arm.com Signed-off-by: Miao Zhong zhongmiao@hisilicon.com Signed-off-by: Will Deacon will.deacon@arm.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- drivers/iommu/arm-smmu-v3.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c index 347aaaa5a7ea..fc6eb752ab35 100644 --- a/drivers/iommu/arm-smmu-v3.c +++ b/drivers/iommu/arm-smmu-v3.c @@ -1219,6 +1219,7 @@ static irqreturn_t arm_smmu_priq_thread(int irq, void *dev)
/* Sync our overflow flag, as we believe we're up to speed */ q->cons = Q_OVF(q, q->prod) | Q_WRP(q, q->cons) | Q_IDX(q, q->cons); + writel(q->cons, q->cons_reg); return IRQ_HANDLED; }
From: Takashi Iwai tiwai@suse.de
[ Upstream commit bd1cd0eb2ce9141100628d476ead4de485501b29 ]
AU0828_DEVICE() macro in quirks-table.h uses USB_DEVICE_VENDOR_SPEC() for expanding idVendor and idProduct fields. However, the latter macro adds also match_flags and bInterfaceClass, which are different from the values AU0828_DEVICE() macro sets after that.
For fixing them, just expand idVendor and idProduct fields manually in AU0828_DEVICE().
This fixes sparse warnings like: sound/usb/quirks-table.h:2892:1: warning: Initializer entry defined twice
Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- sound/usb/quirks-table.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h index 69bf5cf1e91e..15cbe2565703 100644 --- a/sound/usb/quirks-table.h +++ b/sound/usb/quirks-table.h @@ -2875,7 +2875,8 @@ YAMAHA_DEVICE(0x7010, "UB99"), */
#define AU0828_DEVICE(vid, pid, vname, pname) { \ - USB_DEVICE_VENDOR_SPEC(vid, pid), \ + .idVendor = vid, \ + .idProduct = pid, \ .match_flags = USB_DEVICE_ID_MATCH_DEVICE | \ USB_DEVICE_ID_MATCH_INT_CLASS | \ USB_DEVICE_ID_MATCH_INT_SUBCLASS, \
From: Takashi Iwai tiwai@suse.de
[ Upstream commit 7c500f9ea139d0c9b80fdea5a9c911db3166ea54 ]
The default sample sizes set by msnd driver are bogus; it sets ALSA PCM format, not the actual bit width.
Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- sound/isa/msnd/msnd_pinnacle.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/sound/isa/msnd/msnd_pinnacle.c b/sound/isa/msnd/msnd_pinnacle.c index a31ea6c22d19..2d7379dec1f0 100644 --- a/sound/isa/msnd/msnd_pinnacle.c +++ b/sound/isa/msnd/msnd_pinnacle.c @@ -82,10 +82,10 @@
static void set_default_audio_parameters(struct snd_msnd *chip) { - chip->play_sample_size = DEFSAMPLESIZE; + chip->play_sample_size = snd_pcm_format_width(DEFSAMPLESIZE); chip->play_sample_rate = DEFSAMPLERATE; chip->play_channels = DEFCHANNELS; - chip->capture_sample_size = DEFSAMPLESIZE; + chip->capture_sample_size = snd_pcm_format_width(DEFSAMPLESIZE); chip->capture_sample_rate = DEFSAMPLERATE; chip->capture_channels = DEFCHANNELS; }
From: YueHaibing yuehaibing@huawei.com
[ Upstream commit 934ffce1343f22ed5e2d0bd6da4440f4848074de ]
Fix a static code checker warning:
net/xfrm/xfrm_policy.c:1836 xfrm_resolve_and_create_bundle() warn: passing zero to 'ERR_PTR'
xfrm_tmpl_resolve return 0 just means no xdst found, return NULL instead of passing zero to ERR_PTR.
Fixes: d809ec895505 ("xfrm: do not assume that template resolving always returns xfrms") Signed-off-by: YueHaibing yuehaibing@huawei.com Signed-off-by: Steffen Klassert steffen.klassert@secunet.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- net/xfrm/xfrm_policy.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c index f9a13b67df5e..ca690d7ebde9 100644 --- a/net/xfrm/xfrm_policy.c +++ b/net/xfrm/xfrm_policy.c @@ -1845,7 +1845,10 @@ xfrm_resolve_and_create_bundle(struct xfrm_policy **pols, int num_pols, /* Try to instantiate a bundle */ err = xfrm_tmpl_resolve(pols, num_pols, fl, xfrm, family); if (err <= 0) { - if (err != 0 && err != -EAGAIN) + if (err == 0) + return NULL; + + if (err != -EAGAIN) XFRM_INC_STATS(net, LINUX_MIB_XFRMOUTPOLERROR); return ERR_PTR(err); }
From: Nicholas Mc Guire hofrat@osadl.org
[ Upstream commit 11177e7a7aaef95935592072985526ebf0a3df43 ]
of_find_compatible_node() is returning a device node with refcount incremented and must be explicitly decremented after the last use which is right after the us in of_iomap() here.
Signed-off-by: Nicholas Mc Guire hofrat@osadl.org Fixes: 787b4271a6a0 ("clk: imx: add imx6ul clk tree support") Signed-off-by: Stephen Boyd sboyd@kernel.org Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- drivers/clk/imx/clk-imx6ul.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/clk/imx/clk-imx6ul.c b/drivers/clk/imx/clk-imx6ul.c index 01718d05e952..9e8f0e255de2 100644 --- a/drivers/clk/imx/clk-imx6ul.c +++ b/drivers/clk/imx/clk-imx6ul.c @@ -120,6 +120,7 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
np = of_find_compatible_node(NULL, NULL, "fsl,imx6ul-anatop"); base = of_iomap(np, 0); + of_node_put(np); WARN_ON(!base);
clks[IMX6UL_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", base + 0x00, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
From: Andreas Gruenbacher agruenba@redhat.com
[ Upstream commit 776125785a87ff05d49938bd5b9f336f2a05bff6 ]
To speed up the common case of appending to a file, gfs2_write_alloc_required presumes that writing beyond the end of a file will always require additional blocks to be allocated. This assumption is incorrect for preallocates files, but there are no negative consequences as long as *some* space is still left on the filesystem.
One special file that always has some space preallocated beyond the end of the file is the rindex: when growing a filesystem, gfs2_grow adds one or more new resource groups and appends records describing those resource groups to the rindex; the preallocated space ensures that this is always possible.
However, when a filesystem is completely full, gfs2_write_alloc_required will indicate that an additional allocation is required, and appending the next record to the rindex will fail even though space for that record has already been preallocated. To fix that, skip the incorrect optimization in gfs2_write_alloc_required, but for the rindex only. Other writes to preallocated space beyond the end of the file are still allowed to fail on completely full filesystems.
Signed-off-by: Andreas Gruenbacher agruenba@redhat.com Reviewed-by: Bob Peterson rpeterso@redhat.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- fs/gfs2/bmap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/gfs2/bmap.c b/fs/gfs2/bmap.c index 61296ecbd0e2..09476bb8f6cd 100644 --- a/fs/gfs2/bmap.c +++ b/fs/gfs2/bmap.c @@ -1476,7 +1476,7 @@ int gfs2_write_alloc_required(struct gfs2_inode *ip, u64 offset, end_of_file = (i_size_read(&ip->i_inode) + sdp->sd_sb.sb_bsize - 1) >> shift; lblock = offset >> shift; lblock_stop = (offset + len + sdp->sd_sb.sb_bsize - 1) >> shift; - if (lblock_stop > end_of_file) + if (lblock_stop > end_of_file && ip != GFS2_I(sdp->sd_rindex)) return 1;
size = (lblock_stop - lblock) << shift;
From: Masahiro Yamada yamada.masahiro@socionext.com
[ Upstream commit 9c2af1c7377a8a6ef86e5cabf80978f3dbbb25c0 ]
If Make gets a fatal signal while a shell is executing, it may delete the target file that the recipe was supposed to update. This is needed to make sure that it is remade from scratch when Make is next run; if Make is interrupted after the recipe has begun to write the target file, it results in an incomplete file whose time stamp is newer than that of the prerequisites files. Make automatically deletes the incomplete file on interrupt unless the target is marked .PRECIOUS.
The situation is just the same as when the shell fails for some reasons. Usually when a recipe line fails, if it has changed the target file at all, the file is corrupted, or at least it is not completely updated. Yet the file’s time stamp says that it is now up to date, so the next time Make runs, it will not try to update that file.
However, Make does not cater to delete the incomplete target file in this case. We need to add .DELETE_ON_ERROR somewhere in the Makefile to request it.
scripts/Kbuild.include seems a suitable place to add it because it is included from almost all sub-makes.
Please note .DELETE_ON_ERROR is not effective for phony targets.
The external module building should never ever touch the kernel tree. The following recipe fails if include/generated/autoconf.h is missing. However, include/config/auto.conf is not deleted since it is a phony target.
PHONY += include/config/auto.conf
include/config/auto.conf: $(Q)test -e include/generated/autoconf.h -a -e $@ || ( \ echo >&2; \ echo >&2 " ERROR: Kernel configuration is invalid."; \ echo >&2 " include/generated/autoconf.h or $@ are missing.";\ echo >&2 " Run 'make oldconfig && make prepare' on kernel src to fix it."; \ echo >&2 ; \ /bin/false)
Signed-off-by: Masahiro Yamada yamada.masahiro@socionext.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- scripts/Kbuild.include | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/scripts/Kbuild.include b/scripts/Kbuild.include index 31a981d6229d..5897fc3857a0 100644 --- a/scripts/Kbuild.include +++ b/scripts/Kbuild.include @@ -359,3 +359,6 @@ endif endef # ############################################################################### + +# delete partially updated (i.e. corrupted) files on error +.DELETE_ON_ERROR:
From: Felix Fietkau nbd@nbd.name
[ Upstream commit f8a7bfe1cb2c1ebfa07775c9c8ac0ad3ba8e5ff5 ]
This patch disables irq on reboot to fix hang issues that were observed due to pending interrupts.
Signed-off-by: Felix Fietkau nbd@nbd.name Signed-off-by: John Crispin john@phrozen.org Signed-off-by: Paul Burton paul.burton@mips.com Patchwork: https://patchwork.linux-mips.org/patch/19913/ Cc: James Hogan jhogan@kernel.org Cc: Ralf Baechle ralf@linux-mips.org Cc: linux-mips@linux-mips.org Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- arch/mips/ath79/setup.c | 1 + arch/mips/include/asm/mach-ath79/ath79.h | 1 + 2 files changed, 2 insertions(+)
diff --git a/arch/mips/ath79/setup.c b/arch/mips/ath79/setup.c index 8755d618e116..961c393c0f55 100644 --- a/arch/mips/ath79/setup.c +++ b/arch/mips/ath79/setup.c @@ -44,6 +44,7 @@ static char ath79_sys_type[ATH79_SYS_TYPE_LEN];
static void ath79_restart(char *command) { + local_irq_disable(); ath79_device_reset_set(AR71XX_RESET_FULL_CHIP); for (;;) if (cpu_wait) diff --git a/arch/mips/include/asm/mach-ath79/ath79.h b/arch/mips/include/asm/mach-ath79/ath79.h index 4eee221b0cf0..d2be8e4f7a35 100644 --- a/arch/mips/include/asm/mach-ath79/ath79.h +++ b/arch/mips/include/asm/mach-ath79/ath79.h @@ -133,6 +133,7 @@ static inline u32 ath79_pll_rr(unsigned reg) static inline void ath79_reset_wr(unsigned reg, u32 val) { __raw_writel(val, ath79_reset_base + reg); + (void) __raw_readl(ath79_reset_base + reg); /* flush */ }
static inline u32 ath79_reset_rr(unsigned reg)
From: John Keeping john@metanate.com
[ Upstream commit e49756544a21f5625b379b3871d27d8500764670 ]
In pl330_update() when checking if a channel has been aborted, the channel's lock is not taken, only the overall pl330_dmac lock. But in pl330_terminate_all() the aborted flag (req_running==-1) is set under the channel lock and not the pl330_dmac lock.
With threaded interrupts, this leads to a potential race:
pl330_terminate_all pl330_update ------------------- ------------ lock channel entry lock pl330 _stop channel unlock pl330 lock pl330 check req_running != -1 req_running = -1 _start channel
Signed-off-by: John Keeping john@metanate.com Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- drivers/dma/pl330.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c index 8db791ef2027..95619ee33112 100644 --- a/drivers/dma/pl330.c +++ b/drivers/dma/pl330.c @@ -2132,13 +2132,14 @@ static int pl330_terminate_all(struct dma_chan *chan)
pm_runtime_get_sync(pl330->ddma.dev); spin_lock_irqsave(&pch->lock, flags); + spin_lock(&pl330->lock); _stop(pch->thread); - spin_unlock(&pl330->lock); - pch->thread->req[0].desc = NULL; pch->thread->req[1].desc = NULL; pch->thread->req_running = -1; + spin_unlock(&pl330->lock); + power_down = pch->active; pch->active = false;
From: Hans Verkuil hverkuil@xs4all.nl
[ Upstream commit b509d733d337417bcb7fa4a35be3b9a49332b724 ]
The vb2_core_qbuf() function didn't check if q->error was set. It is checked in __buf_prepare(), but that function isn't called if the buffer was already prepared before with VIDIOC_PREPARE_BUF.
So check it at the start of vb2_core_qbuf() as well.
Signed-off-by: Hans Verkuil hans.verkuil@cisco.com Acked-by: Sakari Ailus sakari.ailus@linux.intel.com Signed-off-by: Hans Verkuil hans.verkuil@cisco.com Signed-off-by: Mauro Carvalho Chehab mchehab+samsung@kernel.org Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- drivers/media/v4l2-core/videobuf2-core.c | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/drivers/media/v4l2-core/videobuf2-core.c b/drivers/media/v4l2-core/videobuf2-core.c index 0c1a42bf27fd..1c37d5a78822 100644 --- a/drivers/media/v4l2-core/videobuf2-core.c +++ b/drivers/media/v4l2-core/videobuf2-core.c @@ -1366,6 +1366,11 @@ int vb2_core_qbuf(struct vb2_queue *q, unsigned int index, void *pb) struct vb2_buffer *vb; int ret;
+ if (q->error) { + dprintk(1, "fatal error occurred on queue\n"); + return -EIO; + } + vb = q->bufs[index];
switch (vb->state) {
From: Randy Dunlap rdunlap@infradead.org
[ Upstream commit 1d25e3eeed1d987404e2d2e451eebac8c15cecc1 ]
Fix 2 printk format warnings (this driver is currently only used by arch/sh/) by using "%pap" instead of "%lx".
Fixes these build warnings:
../drivers/mtd/maps/solutionengine.c: In function 'init_soleng_maps': ../include/linux/kern_levels.h:5:18: warning: format '%lx' expects argument of type 'long unsigned int', but argument 2 has type 'resource_size_t' {aka 'unsigned int'} [-Wformat=] ../drivers/mtd/maps/solutionengine.c:62:54: note: format string is defined here printk(KERN_NOTICE "Solution Engine: Flash at 0x%08lx, EPROM at 0x%08lx\n", ~~~~^ %08x ../include/linux/kern_levels.h:5:18: warning: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'resource_size_t' {aka 'unsigned int'} [-Wformat=] ../drivers/mtd/maps/solutionengine.c:62:72: note: format string is defined here printk(KERN_NOTICE "Solution Engine: Flash at 0x%08lx, EPROM at 0x%08lx\n", ~~~~^ %08x
Cc: David Woodhouse dwmw2@infradead.org Cc: Brian Norris computersforpeace@gmail.com Cc: Boris Brezillon boris.brezillon@bootlin.com Cc: Marek Vasut marek.vasut@gmail.com Cc: Richard Weinberger richard@nod.at Cc: linux-mtd@lists.infradead.org Cc: Yoshinori Sato ysato@users.sourceforge.jp Cc: Rich Felker dalias@libc.org Cc: linux-sh@vger.kernel.org Cc: Sergei Shtylyov sergei.shtylyov@cogentembedded.com
Signed-off-by: Randy Dunlap rdunlap@infradead.org Signed-off-by: Boris Brezillon boris.brezillon@bootlin.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- drivers/mtd/maps/solutionengine.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/mtd/maps/solutionengine.c b/drivers/mtd/maps/solutionengine.c index bb580bc16445..c07f21b20463 100644 --- a/drivers/mtd/maps/solutionengine.c +++ b/drivers/mtd/maps/solutionengine.c @@ -59,9 +59,9 @@ static int __init init_soleng_maps(void) return -ENXIO; } } - printk(KERN_NOTICE "Solution Engine: Flash at 0x%08lx, EPROM at 0x%08lx\n", - soleng_flash_map.phys & 0x1fffffff, - soleng_eprom_map.phys & 0x1fffffff); + printk(KERN_NOTICE "Solution Engine: Flash at 0x%pap, EPROM at 0x%pap\n", + &soleng_flash_map.phys, + &soleng_eprom_map.phys); flash_mtd->owner = THIS_MODULE;
eprom_mtd = do_map_probe("map_rom", &soleng_eprom_map);
From: Bob Peterson rpeterso@redhat.com
[ Upstream commit e79e0e1428188b24c3b57309ffa54a33c4ae40c4 ]
Before this patch, you could get into situations like this:
1. Process 1 searches for X free blocks, finds them, makes a reservation 2. Process 2 searches for free blocks in the same rgrp, but now the bitmap is full because process 1's reservation is skipped over. So it marks the bitmap as GBF_FULL. 3. Process 1 tries to allocate blocks from its own reservation, but since the GBF_FULL bit is set, it skips over the rgrp and searches elsewhere, thus not using its own reservation.
This patch adds an additional check to allow processes to use their own reservations.
Signed-off-by: Bob Peterson rpeterso@redhat.com Signed-off-by: Andreas Gruenbacher agruenba@redhat.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- fs/gfs2/rgrp.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c index c134c0462cee..220f9f767307 100644 --- a/fs/gfs2/rgrp.c +++ b/fs/gfs2/rgrp.c @@ -1691,7 +1691,8 @@ static int gfs2_rbm_find(struct gfs2_rbm *rbm, u8 state, u32 *minext,
while(1) { bi = rbm_bi(rbm); - if (test_bit(GBF_FULL, &bi->bi_flags) && + if ((ip == NULL || !gfs2_rs_active(&ip->i_res)) && + test_bit(GBF_FULL, &bi->bi_flags) && (state == GFS2_BLKST_FREE)) goto next_bitmap;
From: Lars-Peter Clausen lars@metafoo.de
[ Upstream commit 5a4e33c1c53ae7d4425f7d94e60e4458a37b349e ]
Fix the displayed phase for the ad9523 driver. Currently the most significant decimal place is dropped and all other digits are shifted one to the left. This is due to a multiplication by 10, which is not necessary, so remove it.
Signed-off-by: Lars-Peter Clausen lars@metafoo.de Signed-off-by: Alexandru Ardelean alexandru.ardelean@analog.com Fixes: cd1678f9632 ("iio: frequency: New driver for AD9523 SPI Low Jitter Clock Generator") Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- drivers/iio/frequency/ad9523.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/iio/frequency/ad9523.c b/drivers/iio/frequency/ad9523.c index 44a30f286de1..adc86aa30409 100644 --- a/drivers/iio/frequency/ad9523.c +++ b/drivers/iio/frequency/ad9523.c @@ -641,7 +641,7 @@ static int ad9523_read_raw(struct iio_dev *indio_dev, code = (AD9523_CLK_DIST_DIV_PHASE_REV(ret) * 3141592) / AD9523_CLK_DIST_DIV_REV(ret); *val = code / 1000000; - *val2 = (code % 1000000) * 10; + *val2 = code % 1000000; return IIO_VAL_INT_PLUS_MICRO; default: return -EINVAL;
From: Dan Carpenter dan.carpenter@oracle.com
[ Upstream commit 5ec1ec35b2979b59d0b33381e7c9aac17e159d16 ]
The omapfb_register_client[] array has OMAPFB_PLANE_NUM elements so the
should be >= or we are one element beyond the end of the array.
Fixes: 8b08cf2b64f5 ("OMAP: add TI OMAP framebuffer driver") Signed-off-by: Dan Carpenter dan.carpenter@oracle.com Cc: Imre Deak imre.deak@solidboot.com Signed-off-by: Bartlomiej Zolnierkiewicz b.zolnierkie@samsung.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- drivers/video/fbdev/omap/omapfb_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/video/fbdev/omap/omapfb_main.c b/drivers/video/fbdev/omap/omapfb_main.c index 393ae1bc07e8..a8a6f072fb78 100644 --- a/drivers/video/fbdev/omap/omapfb_main.c +++ b/drivers/video/fbdev/omap/omapfb_main.c @@ -977,7 +977,7 @@ int omapfb_register_client(struct omapfb_notifier_block *omapfb_nb, { int r;
- if ((unsigned)omapfb_nb->plane_idx > OMAPFB_PLANE_NUM) + if ((unsigned)omapfb_nb->plane_idx >= OMAPFB_PLANE_NUM) return -EINVAL;
if (!notifier_inited) {
From: Anton Vasilyev vasilyev@ispras.ru
[ Upstream commit 5958fde72d04e7b8c6de3669d1f794a90997e3eb ]
goldfish_fb_probe() allocates memory for fb, but goldfish_fb_remove() does not have deallocation of fb, which leads to memory leak on probe/remove.
The patch adds deallocation into goldfish_fb_remove().
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Anton Vasilyev vasilyev@ispras.ru Cc: Aleksandar Markovic aleksandar.markovic@mips.com Cc: Miodrag Dinic miodrag.dinic@mips.com Cc: Goran Ferenc goran.ferenc@mips.com Signed-off-by: Bartlomiej Zolnierkiewicz b.zolnierkie@samsung.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- drivers/video/fbdev/goldfishfb.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/video/fbdev/goldfishfb.c b/drivers/video/fbdev/goldfishfb.c index 7f6c9e6cfc6c..14a93cb21310 100644 --- a/drivers/video/fbdev/goldfishfb.c +++ b/drivers/video/fbdev/goldfishfb.c @@ -301,6 +301,7 @@ static int goldfish_fb_remove(struct platform_device *pdev) dma_free_coherent(&pdev->dev, framesize, (void *)fb->fb.screen_base, fb->fb.fix.smem_start); iounmap(fb->reg_base); + kfree(fb); return 0; }
From: Randy Dunlap rdunlap@infradead.org
[ Upstream commit b6566b47a67e07fdca44cf51abb14e2fbe17d3eb ]
Fix a build warning in viafbdev.c when CONFIG_PROC_FS is not enabled by marking the unused function as __maybe_unused.
../drivers/video/fbdev/via/viafbdev.c:1471:12: warning: 'viafb_sup_odev_proc_show' defined but not used [-Wunused-function]
Signed-off-by: Randy Dunlap rdunlap@infradead.org Cc: Florian Tobias Schandinat FlorianSchandinat@gmx.de Signed-off-by: Bartlomiej Zolnierkiewicz b.zolnierkie@samsung.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- drivers/video/fbdev/via/viafbdev.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/video/fbdev/via/viafbdev.c b/drivers/video/fbdev/via/viafbdev.c index badee04ef496..71b5dca95bdb 100644 --- a/drivers/video/fbdev/via/viafbdev.c +++ b/drivers/video/fbdev/via/viafbdev.c @@ -19,6 +19,7 @@ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+#include <linux/compiler.h> #include <linux/module.h> #include <linux/seq_file.h> #include <linux/slab.h> @@ -1468,7 +1469,7 @@ static const struct file_operations viafb_vt1636_proc_fops = {
#endif /* CONFIG_FB_VIA_DIRECT_PROCFS */
-static int viafb_sup_odev_proc_show(struct seq_file *m, void *v) +static int __maybe_unused viafb_sup_odev_proc_show(struct seq_file *m, void *v) { via_odev_to_seq(m, supported_odev_map[ viaparinfo->shared->chip_info.gfx_chip_name]);
From: Sandipan Das sandipan@linux.ibm.com
[ Upstream commit 9068533e4f470daf2b0f29c71d865990acd8826e ]
For powerpc64, perf will filter out the second entry in the callchain, i.e. the LR value, if the return address of the function corresponding to the probed location has already been saved on its caller's stack.
The state of the return address is determined using debug information. At any point within a function, if the return address is already saved somewhere, a DWARF expression can tell us about its location. If the return address in still in LR only, no DWARF expression would exist.
Typically, the instructions in a function's prologue first copy the LR value to R0 and then pushes R0 on to the stack. If LR has already been copied to R0 but R0 is yet to be pushed to the stack, we can still get a DWARF expression that says that the return address is in R0. This is indicating that getting a DWARF expression for the return address does not guarantee the fact that it has already been saved on the stack.
This can be observed on a powerpc64le system running Fedora 27 as shown below.
# objdump -d /usr/lib64/libc-2.26.so | less ... 000000000015af20 <inet_pton>: 15af20: 0b 00 4c 3c addis r2,r12,11 15af24: e0 c1 42 38 addi r2,r2,-15904 15af28: a6 02 08 7c mflr r0 15af2c: f0 ff c1 fb std r30,-16(r1) 15af30: f8 ff e1 fb std r31,-8(r1) 15af34: 78 1b 7f 7c mr r31,r3 15af38: 78 23 83 7c mr r3,r4 15af3c: 78 2b be 7c mr r30,r5 15af40: 10 00 01 f8 std r0,16(r1) 15af44: c1 ff 21 f8 stdu r1,-64(r1) 15af48: 28 00 81 f8 std r4,40(r1) ...
# readelf --debug-dump=frames-interp /usr/lib64/libc-2.26.so | less ... 00027024 0000000000000024 00027028 FDE cie=00000000 pc=000000000015af20..000000000015af88 LOC CFA r30 r31 ra 000000000015af20 r1+0 u u u 000000000015af34 r1+0 c-16 c-8 r0 000000000015af48 r1+64 c-16 c-8 c+16 000000000015af5c r1+0 c-16 c-8 c+16 000000000015af78 r1+0 u u ...
# perf probe -x /usr/lib64/libc-2.26.so -a inet_pton+0x18 # perf record -e probe_libc:inet_pton -g ping -6 -c 1 ::1 # perf script
Before:
ping 2829 [005] 512917.460174: probe_libc:inet_pton: (7fff7e2baf38) 7fff7e2baf38 __GI___inet_pton+0x18 (/usr/lib64/libc-2.26.so) 7fff7e2705b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so) 12f152d70 _init+0xbfc (/usr/bin/ping) 7fff7e1836a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so) 7fff7e183898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so) 0 [unknown] ([unknown])
After:
ping 2829 [005] 512917.460174: probe_libc:inet_pton: (7fff7e2baf38) 7fff7e2baf38 __GI___inet_pton+0x18 (/usr/lib64/libc-2.26.so) 7fff7e26fa54 gaih_inet.constprop.7+0xf44 (/usr/lib64/libc-2.26.so) 7fff7e2705b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so) 12f152d70 _init+0xbfc (/usr/bin/ping) 7fff7e1836a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so) 7fff7e183898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so) 0 [unknown] ([unknown])
Reported-by: Ravi Bangoria ravi.bangoria@linux.ibm.com Signed-off-by: Sandipan Das sandipan@linux.ibm.com Cc: Jiri Olsa jolsa@redhat.com Cc: Maynard Johnson maynard@us.ibm.com Cc: Naveen N. Rao naveen.n.rao@linux.vnet.ibm.com Cc: Ravi Bangoria ravi.bangoria@linux.vnet.ibm.com Cc: Sukadev Bhattiprolu sukadev@linux.vnet.ibm.com Link: http://lkml.kernel.org/r/66e848a7bdf2d43b39210a705ff6d828a0865661.1530724939... Signed-off-by: Arnaldo Carvalho de Melo acme@redhat.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- tools/perf/arch/powerpc/util/skip-callchain-idx.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/tools/perf/arch/powerpc/util/skip-callchain-idx.c b/tools/perf/arch/powerpc/util/skip-callchain-idx.c index bd630c222e65..9d1f6e976a5a 100644 --- a/tools/perf/arch/powerpc/util/skip-callchain-idx.c +++ b/tools/perf/arch/powerpc/util/skip-callchain-idx.c @@ -58,9 +58,13 @@ static int check_return_reg(int ra_regno, Dwarf_Frame *frame) }
/* - * Check if return address is on the stack. + * Check if return address is on the stack. If return address + * is in a register (typically R0), it is yet to be saved on + * the stack. */ - if (nops != 0 || ops != NULL) + if ((nops != 0 || ops != NULL) && + !(nops == 1 && ops[0].atom == DW_OP_regx && + ops[0].number2 == 0 && ops[0].offset == 0)) return 0;
/*
From: Fredrik Noring noring@nocrew.org
[ Upstream commit 1ba0a59cea41ea05fda92daaf2a2958a2246b9cf ]
I discovered the problem when developing a frame buffer driver for the PlayStation 2 (not yet merged), using the following video modes for the PlayStation 3 in drivers/video/fbdev/ps3fb.c:
}, { /* 1080if */ "1080if", 50, 1920, 1080, 13468, 148, 484, 36, 4, 88, 5, FB_SYNC_BROADCAST, FB_VMODE_INTERLACED }, { /* 1080pf */ "1080pf", 50, 1920, 1080, 6734, 148, 484, 36, 4, 88, 5, FB_SYNC_BROADCAST, FB_VMODE_NONINTERLACED },
In ps3fb_probe, the mode_option module parameter is used with fb_find_mode but it can only select the interlaced variant of 1920x1080 since the loop matching the modes does not take the difference between interlaced and progressive modes into account.
In short, without the patch, progressive 1920x1080 cannot be chosen as a mode_option parameter since fb_find_mode (falsely) thinks interlace is a perfect match.
Signed-off-by: Fredrik Noring noring@nocrew.org Cc: "Maciej W. Rozycki" macro@linux-mips.org [b.zolnierkie: updated patch description] Signed-off-by: Bartlomiej Zolnierkiewicz b.zolnierkie@samsung.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- drivers/video/fbdev/core/modedb.c | 41 ++++++++++++++++++++++--------- 1 file changed, 30 insertions(+), 11 deletions(-)
diff --git a/drivers/video/fbdev/core/modedb.c b/drivers/video/fbdev/core/modedb.c index 2510fa728d77..de119f11b78f 100644 --- a/drivers/video/fbdev/core/modedb.c +++ b/drivers/video/fbdev/core/modedb.c @@ -644,7 +644,7 @@ static int fb_try_mode(struct fb_var_screeninfo *var, struct fb_info *info, * * Valid mode specifiers for @mode_option: * - * <xres>x<yres>[M][R][-<bpp>][@<refresh>][i][m] or + * <xres>x<yres>[M][R][-<bpp>][@<refresh>][i][p][m] or * <name>[-<bpp>][@<refresh>] * * with <xres>, <yres>, <bpp> and <refresh> decimal numbers and @@ -653,10 +653,10 @@ static int fb_try_mode(struct fb_var_screeninfo *var, struct fb_info *info, * If 'M' is present after yres (and before refresh/bpp if present), * the function will compute the timings using VESA(tm) Coordinated * Video Timings (CVT). If 'R' is present after 'M', will compute with - * reduced blanking (for flatpanels). If 'i' is present, compute - * interlaced mode. If 'm' is present, add margins equal to 1.8% - * of xres rounded down to 8 pixels, and 1.8% of yres. The char - * 'i' and 'm' must be after 'M' and 'R'. Example: + * reduced blanking (for flatpanels). If 'i' or 'p' are present, compute + * interlaced or progressive mode. If 'm' is present, add margins equal + * to 1.8% of xres rounded down to 8 pixels, and 1.8% of yres. The chars + * 'i', 'p' and 'm' must be after 'M' and 'R'. Example: * * 1024x768MR-8@60m - Reduced blank with margins at 60Hz. * @@ -697,7 +697,8 @@ int fb_find_mode(struct fb_var_screeninfo *var, unsigned int namelen = strlen(name); int res_specified = 0, bpp_specified = 0, refresh_specified = 0; unsigned int xres = 0, yres = 0, bpp = default_bpp, refresh = 0; - int yres_specified = 0, cvt = 0, rb = 0, interlace = 0; + int yres_specified = 0, cvt = 0, rb = 0; + int interlace_specified = 0, interlace = 0; int margins = 0; u32 best, diff, tdiff;
@@ -748,9 +749,17 @@ int fb_find_mode(struct fb_var_screeninfo *var, if (!cvt) margins = 1; break; + case 'p': + if (!cvt) { + interlace = 0; + interlace_specified = 1; + } + break; case 'i': - if (!cvt) + if (!cvt) { interlace = 1; + interlace_specified = 1; + } break; default: goto done; @@ -819,11 +828,21 @@ int fb_find_mode(struct fb_var_screeninfo *var, if ((name_matches(db[i], name, namelen) || (res_specified && res_matches(db[i], xres, yres))) && !fb_try_mode(var, info, &db[i], bpp)) { - if (refresh_specified && db[i].refresh == refresh) - return 1; + const int db_interlace = (db[i].vmode & + FB_VMODE_INTERLACED ? 1 : 0); + int score = abs(db[i].refresh - refresh); + + if (interlace_specified) + score += abs(db_interlace - interlace); + + if (!interlace_specified || + db_interlace == interlace) + if (refresh_specified && + db[i].refresh == refresh) + return 1;
- if (abs(db[i].refresh - refresh) < diff) { - diff = abs(db[i].refresh - refresh); + if (score < diff) { + diff = score; best = i; } }
From: Krzysztof Kozlowski krzk@kernel.org
[ Upstream commit cd4806911cee3901bc2b5eb95603cf1958720b57 ]
For most of Exynos SoCs, Power Management Unit (PMU) address space is mapped into global variable 'pmu_base_addr' very early when initializing PMU interrupt controller. A lot of other machine code depends on it so when doing iounmap() on this address, clear the global as well to avoid usage of invalid value (pointing to unmapped memory region).
Properly mapped PMU address space is a requirement for all other machine code so this fix is purely theoretical. Boot will fail immediately in many other places after following this error path.
Signed-off-by: Krzysztof Kozlowski krzk@kernel.org Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- arch/arm/mach-exynos/suspend.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c index c169cc3049aa..e8adb428dddb 100644 --- a/arch/arm/mach-exynos/suspend.c +++ b/arch/arm/mach-exynos/suspend.c @@ -260,6 +260,7 @@ static int __init exynos_pmu_irq_init(struct device_node *node, NULL); if (!domain) { iounmap(pmu_base_addr); + pmu_base_addr = NULL; return -ENOMEM; }
From: Sandipan Das sandipan@linux.ibm.com
[ Upstream commit c715fcfda5a08edabaa15508742be926b7ee51db ]
For powerpc64, redundant entries in the callchain are filtered out by determining the state of the return address and the stack frame using DWARF debug information.
For making these filtering decisions we must analyze the debug information for the location corresponding to the program counter value, i.e. the first entry in the callchain, and not the LR value; otherwise, perf may filter out either the second or the third entry in the callchain incorrectly.
This can be observed on a powerpc64le system running Fedora 27 as shown below.
Case 1 - Attaching a probe at inet_pton+0x8 (binary offset 0x15af28). Return address is still in LR and a new stack frame is not yet allocated. The LR value, i.e. the second entry, should not be filtered out.
# objdump -d /usr/lib64/libc-2.26.so | less ... 000000000010eb10 <gaih_inet.constprop.7>: ... 10fa48: 78 bb e4 7e mr r4,r23 10fa4c: 0a 00 60 38 li r3,10 10fa50: d9 b4 04 48 bl 15af28 <inet_pton+0x8> 10fa54: 00 00 00 60 nop 10fa58: ac f4 ff 4b b 10ef04 <gaih_inet.constprop.7+0x3f4> ... 0000000000110450 <getaddrinfo>: ... 1105a8: 54 00 ff 38 addi r7,r31,84 1105ac: 58 00 df 38 addi r6,r31,88 1105b0: 69 e5 ff 4b bl 10eb18 <gaih_inet.constprop.7+0x8> 1105b4: 78 1b 71 7c mr r17,r3 1105b8: 50 01 7f e8 ld r3,336(r31) ... 000000000015af20 <inet_pton>: 15af20: 0b 00 4c 3c addis r2,r12,11 15af24: e0 c1 42 38 addi r2,r2,-15904 15af28: a6 02 08 7c mflr r0 15af2c: f0 ff c1 fb std r30,-16(r1) 15af30: f8 ff e1 fb std r31,-8(r1) ...
# perf probe -x /usr/lib64/libc-2.26.so -a inet_pton+0x8 # perf record -e probe_libc:inet_pton -g ping -6 -c 1 ::1 # perf script
Before:
ping 4507 [002] 514985.546540: probe_libc:inet_pton: (7fffa7dbaf28) 7fffa7dbaf28 __GI___inet_pton+0x8 (/usr/lib64/libc-2.26.so) 7fffa7d705b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so) 13fb52d70 _init+0xbfc (/usr/bin/ping) 7fffa7c836a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so) 7fffa7c83898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so) 0 [unknown] ([unknown])
After:
ping 4507 [002] 514985.546540: probe_libc:inet_pton: (7fffa7dbaf28) 7fffa7dbaf28 __GI___inet_pton+0x8 (/usr/lib64/libc-2.26.so) 7fffa7d6fa54 gaih_inet.constprop.7+0xf44 (/usr/lib64/libc-2.26.so) 7fffa7d705b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so) 13fb52d70 _init+0xbfc (/usr/bin/ping) 7fffa7c836a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so) 7fffa7c83898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so) 0 [unknown] ([unknown])
Case 2 - Attaching a probe at _int_malloc+0x180 (binary offset 0x9cf10). Return address in still in LR and a new stack frame has already been allocated but not used. The caller's caller, i.e. the third entry, is invalid and should be filtered out and not the second one.
# objdump -d /usr/lib64/libc-2.26.so | less ... 000000000009cd90 <_int_malloc>: 9cd90: 17 00 4c 3c addis r2,r12,23 9cd94: 70 a3 42 38 addi r2,r2,-23696 9cd98: 26 00 80 7d mfcr r12 9cd9c: f8 ff e1 fb std r31,-8(r1) 9cda0: 17 00 e4 3b addi r31,r4,23 9cda4: d8 ff 61 fb std r27,-40(r1) 9cda8: 78 23 9b 7c mr r27,r4 9cdac: 1f 00 bf 2b cmpldi cr7,r31,31 9cdb0: f0 ff c1 fb std r30,-16(r1) 9cdb4: b0 ff c1 fa std r22,-80(r1) 9cdb8: 78 1b 7e 7c mr r30,r3 9cdbc: 08 00 81 91 stw r12,8(r1) 9cdc0: 11 ff 21 f8 stdu r1,-240(r1) 9cdc4: 4c 01 9d 41 bgt cr7,9cf10 <_int_malloc+0x180> 9cdc8: 20 00 a4 2b cmpldi cr7,r4,32 ... 9cf08: 00 00 00 60 nop 9cf0c: 00 00 42 60 ori r2,r2,0 9cf10: e4 06 ff 7b rldicr r31,r31,0,59 9cf14: 40 f8 a4 7f cmpld cr7,r4,r31 9cf18: 68 05 9d 41 bgt cr7,9d480 <_int_malloc+0x6f0> ... 000000000009e3c0 <tcache_init.part.4>: ... 9e420: 40 02 80 38 li r4,576 9e424: 78 fb e3 7f mr r3,r31 9e428: 71 e9 ff 4b bl 9cd98 <_int_malloc+0x8> 9e42c: 00 00 a3 2f cmpdi cr7,r3,0 9e430: 78 1b 7e 7c mr r30,r3 ... 000000000009f7a0 <__libc_malloc>: ... 9f8f8: 00 00 89 2f cmpwi cr7,r9,0 9f8fc: 1c ff 9e 40 bne cr7,9f818 <__libc_malloc+0x78> 9f900: c9 ea ff 4b bl 9e3c8 <tcache_init.part.4+0x8> 9f904: 00 00 00 60 nop 9f908: e8 90 22 e9 ld r9,-28440(r2) ...
# perf probe -x /usr/lib64/libc-2.26.so -a _int_malloc+0x180 # perf record -e probe_libc:_int_malloc -g ./test-malloc # perf script
Before:
test-malloc 6554 [009] 515975.797403: probe_libc:_int_malloc: (7fffa6e6cf10) 7fffa6e6cf10 _int_malloc+0x180 (/usr/lib64/libc-2.26.so) 7fffa6dd0000 [unknown] (/usr/lib64/libc-2.26.so) 7fffa6e6f904 malloc+0x164 (/usr/lib64/libc-2.26.so) 7fffa6e6f9fc malloc+0x25c (/usr/lib64/libc-2.26.so) 100006b4 main+0x38 (/home/testuser/test-malloc) 7fffa6df36a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so) 7fffa6df3898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so) 0 [unknown] ([unknown])
After:
test-malloc 6554 [009] 515975.797403: probe_libc:_int_malloc: (7fffa6e6cf10) 7fffa6e6cf10 _int_malloc+0x180 (/usr/lib64/libc-2.26.so) 7fffa6e6e42c tcache_init.part.4+0x6c (/usr/lib64/libc-2.26.so) 7fffa6e6f904 malloc+0x164 (/usr/lib64/libc-2.26.so) 7fffa6e6f9fc malloc+0x25c (/usr/lib64/libc-2.26.so) 100006b4 main+0x38 (/home/sandipan/test-malloc) 7fffa6df36a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so) 7fffa6df3898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so) 0 [unknown] ([unknown])
Signed-off-by: Sandipan Das sandipan@linux.ibm.com Cc: Jiri Olsa jolsa@redhat.com Cc: Maynard Johnson maynard@us.ibm.com Cc: Naveen N. Rao naveen.n.rao@linux.vnet.ibm.com Cc: Ravi Bangoria ravi.bangoria@linux.vnet.ibm.com Cc: Sukadev Bhattiprolu sukadev@linux.vnet.ibm.com Fixes: a60335ba3298 ("perf tools powerpc: Adjust callchain based on DWARF debug info") Link: http://lkml.kernel.org/r/24bb726d91ed173aebc972ec3f41a2ef2249434e.1530724939... Signed-off-by: Arnaldo Carvalho de Melo acme@redhat.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- tools/perf/arch/powerpc/util/skip-callchain-idx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/perf/arch/powerpc/util/skip-callchain-idx.c b/tools/perf/arch/powerpc/util/skip-callchain-idx.c index 9d1f6e976a5a..9a53f6e9ef43 100644 --- a/tools/perf/arch/powerpc/util/skip-callchain-idx.c +++ b/tools/perf/arch/powerpc/util/skip-callchain-idx.c @@ -250,7 +250,7 @@ int arch_skip_callchain_idx(struct thread *thread, struct ip_callchain *chain) if (!chain || chain->nr < 3) return skip_slot;
- ip = chain->ips[2]; + ip = chain->ips[1];
thread__find_addr_location(thread, PERF_RECORD_MISC_USER, MAP__FUNCTION, ip, &al);
From: Nicholas Piggin npiggin@gmail.com
[ Upstream commit bd90284cc6c1c9e8e48c8eadd0c79574fcce0b81 ]
The intention here is to consume and discard the remaining buffer upon error. This works if there has not been a previous partial write. If there has been, then total_len is no longer total number of bytes to copy. total_len is always "bytes left to copy", so it should be added to written bytes.
This code may not be exercised any more if partial writes will not be hit, but this is a small bugfix before a larger change.
Reviewed-by: Benjamin Herrenschmidt benh@kernel.crashing.org Signed-off-by: Nicholas Piggin npiggin@gmail.com Signed-off-by: Michael Ellerman mpe@ellerman.id.au Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- arch/powerpc/platforms/powernv/opal.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c index e48826aa314c..b40606051efe 100644 --- a/arch/powerpc/platforms/powernv/opal.c +++ b/arch/powerpc/platforms/powernv/opal.c @@ -371,7 +371,7 @@ int opal_put_chars(uint32_t vtermno, const char *data, int total_len) /* Closed or other error drop */ if (rc != OPAL_SUCCESS && rc != OPAL_BUSY && rc != OPAL_BUSY_EVENT) { - written = total_len; + written += total_len; break; } if (rc == OPAL_SUCCESS) {
From: Paul Cercueil paul@crapouillou.net
[ Upstream commit c6ea7e9747318e5a6774995f4f8e3e0f7c0fa8ba ]
Having the zload address at 0x8060.0000 means the size of the uncompressed kernel cannot be bigger than around 6 MiB, as it is deflated at address 0x8001.0000.
This limit is too small; a kernel with some built-in drivers and things like debugfs enabled will already be over 6 MiB in size, and so will fail to extract properly.
To fix this, we bump the zload address from 0x8060.0000 to 0x8100.0000.
This is fine, as all the boards featuring Ingenic JZ SoCs have at least 32 MiB of RAM, and use u-boot or compatible bootloaders which won't hardcode the load address but read it from the uImage's header.
Signed-off-by: Paul Cercueil paul@crapouillou.net Signed-off-by: Paul Burton paul.burton@mips.com Patchwork: https://patchwork.linux-mips.org/patch/19787/ Cc: Ralf Baechle ralf@linux-mips.org Cc: James Hogan jhogan@kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- arch/mips/jz4740/Platform | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/mips/jz4740/Platform b/arch/mips/jz4740/Platform index 28448d358c10..a2a5a85ea1f9 100644 --- a/arch/mips/jz4740/Platform +++ b/arch/mips/jz4740/Platform @@ -1,4 +1,4 @@ platform-$(CONFIG_MACH_INGENIC) += jz4740/ cflags-$(CONFIG_MACH_INGENIC) += -I$(srctree)/arch/mips/include/asm/mach-jz4740 load-$(CONFIG_MACH_INGENIC) += 0xffffffff80010000 -zload-$(CONFIG_MACH_INGENIC) += 0xffffffff80600000 +zload-$(CONFIG_MACH_INGENIC) += 0xffffffff81000000
From: Manikanta Pubbisetty mpubbise@codeaurora.org
[ Upstream commit 133bf90dbb8b873286f8ec2e81ba26e863114b8c ]
As explained in ieee80211_delayed_tailroom_dec(), during roam, keys of the old AP will be destroyed and new keys will be installed. Deletion of the old key causes crypto_tx_tailroom_needed_cnt to go from 1 to 0 and the new key installation causes a transition from 0 to 1.
Whenever crypto_tx_tailroom_needed_cnt transitions from 0 to 1, we invoke synchronize_net(); the reason for doing this is to avoid a race in the TX path as explained in increment_tailroom_need_count(). This synchronize_net() operation can be slow and can affect the station roam time. To avoid this, decrementing the crypto_tx_tailroom_needed_cnt is delayed for a while so that upon installation of new key the transition would be from 1 to 2 instead of 0 to 1 and thereby improving the roam time.
This is all correct for a STA iftype, but deferring the tailroom_needed decrement for other iftypes may be unnecessary.
For example, let's consider the case of a 4-addr client connecting to an AP for which AP_VLAN interface is also created, let the initial value for tailroom_needed on the AP be 1.
* 4-addr client connects to the AP (AP: tailroom_needed = 1) * AP will clear old keys, delay decrement of tailroom_needed count * AP_VLAN is created, it takes the tailroom count from master (AP_VLAN: tailroom_needed = 1, AP: tailroom_needed = 1) * Install new key for the station, assume key is plumbed in the HW, there won't be any change in tailroom_needed count on AP iface * Delayed decrement of tailroom_needed count on AP (AP: tailroom_needed = 0, AP_VLAN: tailroom_needed = 1)
Because of the delayed decrement on AP iface, tailroom_needed count goes out of sync between AP(master iface) and AP_VLAN(slave iface) and there would be unnecessary tailroom created for the packets going through AP_VLAN iface.
Also, WARN_ONs were observed while trying to bring down the AP_VLAN interface: (warn_slowpath_common) (warn_slowpath_null+0x18/0x20) (warn_slowpath_null) (ieee80211_free_keys+0x114/0x1e4) (ieee80211_free_keys) (ieee80211_del_virtual_monitor+0x51c/0x850) (ieee80211_del_virtual_monitor) (ieee80211_stop+0x30/0x3c) (ieee80211_stop) (__dev_close_many+0x94/0xb8) (__dev_close_many) (dev_close_many+0x5c/0xc8)
Restricting delayed decrement to station interface alone fixes the problem and it makes sense to do so because delayed decrement is done to improve roam time which is applicable only for client devices.
Signed-off-by: Manikanta Pubbisetty mpubbise@codeaurora.org Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- net/mac80211/cfg.c | 2 +- net/mac80211/key.c | 24 +++++++++++++++--------- 2 files changed, 16 insertions(+), 10 deletions(-)
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 00a8cc572a22..1f930032253a 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -286,7 +286,7 @@ static int ieee80211_del_key(struct wiphy *wiphy, struct net_device *dev, goto out_unlock; }
- ieee80211_key_free(key, true); + ieee80211_key_free(key, sdata->vif.type == NL80211_IFTYPE_STATION);
ret = 0; out_unlock: diff --git a/net/mac80211/key.c b/net/mac80211/key.c index 4a72c0d1e56f..91a4e606edcd 100644 --- a/net/mac80211/key.c +++ b/net/mac80211/key.c @@ -647,11 +647,15 @@ int ieee80211_key_link(struct ieee80211_key *key, { struct ieee80211_local *local = sdata->local; struct ieee80211_key *old_key; - int idx, ret; - bool pairwise; - - pairwise = key->conf.flags & IEEE80211_KEY_FLAG_PAIRWISE; - idx = key->conf.keyidx; + int idx = key->conf.keyidx; + bool pairwise = key->conf.flags & IEEE80211_KEY_FLAG_PAIRWISE; + /* + * We want to delay tailroom updates only for station - in that + * case it helps roaming speed, but in other cases it hurts and + * can cause warnings to appear. + */ + bool delay_tailroom = sdata->vif.type == NL80211_IFTYPE_STATION; + int ret;
mutex_lock(&sdata->local->key_mtx);
@@ -679,14 +683,14 @@ int ieee80211_key_link(struct ieee80211_key *key, increment_tailroom_need_count(sdata);
ieee80211_key_replace(sdata, sta, pairwise, old_key, key); - ieee80211_key_destroy(old_key, true); + ieee80211_key_destroy(old_key, delay_tailroom);
ieee80211_debugfs_key_add(key);
if (!local->wowlan) { ret = ieee80211_key_enable_hw_accel(key); if (ret) - ieee80211_key_free(key, true); + ieee80211_key_free(key, delay_tailroom); } else { ret = 0; } @@ -874,7 +878,8 @@ void ieee80211_free_sta_keys(struct ieee80211_local *local, ieee80211_key_replace(key->sdata, key->sta, key->conf.flags & IEEE80211_KEY_FLAG_PAIRWISE, key, NULL); - __ieee80211_key_destroy(key, true); + __ieee80211_key_destroy(key, key->sdata->vif.type == + NL80211_IFTYPE_STATION); }
for (i = 0; i < NUM_DEFAULT_KEYS; i++) { @@ -884,7 +889,8 @@ void ieee80211_free_sta_keys(struct ieee80211_local *local, ieee80211_key_replace(key->sdata, key->sta, key->conf.flags & IEEE80211_KEY_FLAG_PAIRWISE, key, NULL); - __ieee80211_key_destroy(key, true); + __ieee80211_key_destroy(key, key->sdata->vif.type == + NL80211_IFTYPE_STATION); }
mutex_unlock(&local->key_mtx);
From: Vitaly Kuznetsov vkuznets@redhat.com
[ Upstream commit 2d408c0d4574b01b9ed45e02516888bf925e11a9 ]
Commit f599c64fdf7d ("xen-netfront: Fix race between device setup and open") changed the initialization order: xennet_create_queues() now happens before we do register_netdev() so using netdev->name in xennet_init_queue() is incorrect, we end up with the following in /proc/interrupts:
60: 139 0 xen-dyn -event eth%d-q0-tx 61: 265 0 xen-dyn -event eth%d-q0-rx 62: 234 0 xen-dyn -event eth%d-q1-tx 63: 1 0 xen-dyn -event eth%d-q1-rx
and this looks ugly. Actually, using early netdev name (even when it's already set) is also not ideal: nowadays we tend to rename eth devices and queue name may end up not corresponding to the netdev name.
Use nodename from xenbus device for queue naming: this can't change in VM's lifetime. Now /proc/interrupts looks like
62: 202 0 xen-dyn -event device/vif/0-q0-tx 63: 317 0 xen-dyn -event device/vif/0-q0-rx 64: 262 0 xen-dyn -event device/vif/0-q1-tx 65: 17 0 xen-dyn -event device/vif/0-q1-rx
Fixes: f599c64fdf7d ("xen-netfront: Fix race between device setup and open") Signed-off-by: Vitaly Kuznetsov vkuznets@redhat.com Reviewed-by: Ross Lagerwall ross.lagerwall@citrix.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- drivers/net/xen-netfront.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c index 68d0a5c9d437..2c0db518fe14 100644 --- a/drivers/net/xen-netfront.c +++ b/drivers/net/xen-netfront.c @@ -1616,7 +1616,7 @@ static int xennet_init_queue(struct netfront_queue *queue) (unsigned long)queue);
snprintf(queue->name, sizeof(queue->name), "%s-q%u", - queue->info->netdev->name, queue->id); + queue->info->xbdev->nodename, queue->id);
/* Initialise tx_skbs as a free chain containing every entry. */ queue->tx_skb_freelist = 0;
From: Loic Poulain loic.poulain@linaro.org
[ Upstream commit e53db018315b7660bb7000a29e79faff2496c2c2 ]
Current LED trigger, 'bt', is not known/used by any existing driver. Fix this by renaming it to 'bluetooth-power' trigger which is controlled by the Bluetooth subsystem.
Fixes: 9943230c8860 ("arm64: dts: qcom: Add apq8016-sbc board LED's related device nodes") Signed-off-by: Loic Poulain loic.poulain@linaro.org Signed-off-by: Andy Gross andy.gross@linaro.org Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi index 6b8abbe68746..3011c88bd2f3 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi @@ -105,7 +105,7 @@ led@6 { label = "apq8016-sbc:blue:bt"; gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "bt"; + linux,default-trigger = "bluetooth-power"; default-state = "off"; }; };
From: Julian Wiedmann jwi@linux.ibm.com
[ Upstream commit 70551dc46ffa3555a0b5f3545b0cd87ab67fd002 ]
After the subdriver's remove() routine has completed, the card's layer mode is undetermined again. Reflect this in the layer2 field.
If qeth_dev_layer2_store() hits an error after remove() was called, the card _always_ requires a setup(), even if the previous layer mode is requested again. But qeth_dev_layer2_store() bails out early if the requested layer mode still matches the current one. So unless we reset the layer2 field, re-probing the card back to its previous mode is currently not possible.
Signed-off-by: Julian Wiedmann jwi@linux.ibm.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- drivers/s390/net/qeth_core_sys.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/s390/net/qeth_core_sys.c b/drivers/s390/net/qeth_core_sys.c index fa844b0ff847..7bcf0dae3a65 100644 --- a/drivers/s390/net/qeth_core_sys.c +++ b/drivers/s390/net/qeth_core_sys.c @@ -419,6 +419,7 @@ static ssize_t qeth_dev_layer2_store(struct device *dev, if (card->discipline) { card->discipline->remove(card->gdev); qeth_core_free_discipline(card); + card->options.layer2 = -1; }
rc = qeth_core_load_discipline(card, newdis);
From: Julian Wiedmann jwi@linux.ibm.com
[ Upstream commit a702349a4099cd5a7bab0904689d8e0bf8dcd622 ]
By updating q->used_buffers only _after_ do_QDIO() has completed, there is a potential race against the buffer's TX completion. In the unlikely case that the TX completion path wins, qeth_qdio_output_handler() would decrement the counter before qeth_flush_buffers() even incremented it.
Signed-off-by: Julian Wiedmann jwi@linux.ibm.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- drivers/s390/net/qeth_core_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 95c631125a20..09ac56317f1b 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -3505,13 +3505,14 @@ static void qeth_flush_buffers(struct qeth_qdio_out_q *queue, int index, qdio_flags = QDIO_FLAG_SYNC_OUTPUT; if (atomic_read(&queue->set_pci_flags_count)) qdio_flags |= QDIO_FLAG_PCI_OUT; + atomic_add(count, &queue->used_buffers); + rc = do_QDIO(CARD_DDEV(queue->card), qdio_flags, queue->queue_no, index, count); if (queue->card->options.performance_stats) queue->card->perf_stats.outbound_do_qdio_time += qeth_get_micros() - queue->card->perf_stats.outbound_do_qdio_start_time; - atomic_add(count, &queue->used_buffers); if (rc) { queue->card->stats.tx_errors += count; /* ignore temporary SIGA errors without busy condition */
From: Michael Müller michael@fds-team.de
[ Upstream commit 0e7d4d932ffc23f75efb31a8c2ac2396c1b81c55 ]
This patch fixes two typos related to unregistering algorithms supported by SAHARAH 3. In sahara_register_algs the wrong algorithms are unregistered in case of an error. In sahara_unregister_algs the wrong array is used to determine the iteration count.
Signed-off-by: Michael Müller michael@fds-team.de Signed-off-by: Herbert Xu herbert@gondor.apana.org.au Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- drivers/crypto/sahara.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/crypto/sahara.c b/drivers/crypto/sahara.c index f68c24a98277..dedfc96acc66 100644 --- a/drivers/crypto/sahara.c +++ b/drivers/crypto/sahara.c @@ -1363,7 +1363,7 @@ static int sahara_register_algs(struct sahara_dev *dev)
err_sha_v3_algs: for (j = 0; j < k; j++) - crypto_unregister_ahash(&sha_v4_algs[j]); + crypto_unregister_ahash(&sha_v3_algs[j]);
err_aes_algs: for (j = 0; j < i; j++) @@ -1379,7 +1379,7 @@ static void sahara_unregister_algs(struct sahara_dev *dev) for (i = 0; i < ARRAY_SIZE(aes_algs); i++) crypto_unregister_alg(&aes_algs[i]);
- for (i = 0; i < ARRAY_SIZE(sha_v4_algs); i++) + for (i = 0; i < ARRAY_SIZE(sha_v3_algs); i++) crypto_unregister_ahash(&sha_v3_algs[i]);
if (dev->version > SAHARA_VERSION_3)
From: Randy Dunlap rdunlap@infradead.org
[ Upstream commit c2e2a618eb7104e18fdcf739d4d911563812a81c ]
Fix a build warning in toshiba_acpi.c when CONFIG_PROC_FS is not enabled by marking the unused function as __maybe_unused.
../drivers/platform/x86/toshiba_acpi.c:1685:12: warning: 'version_proc_show' defined but not used [-Wunused-function]
Signed-off-by: Randy Dunlap rdunlap@infradead.org Cc: Azael Avalos coproscefalo@gmail.com Cc: platform-driver-x86@vger.kernel.org Cc: Andy Shevchenko andy@infradead.org Signed-off-by: Darren Hart (VMware) dvhart@infradead.org Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- drivers/platform/x86/toshiba_acpi.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c index f774cb576ffa..1ff95b5a429d 100644 --- a/drivers/platform/x86/toshiba_acpi.c +++ b/drivers/platform/x86/toshiba_acpi.c @@ -34,6 +34,7 @@ #define TOSHIBA_ACPI_VERSION "0.23" #define PROC_INTERFACE_VERSION 1
+#include <linux/compiler.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/init.h> @@ -1472,7 +1473,7 @@ static const struct file_operations keys_proc_fops = { .write = keys_proc_write, };
-static int version_proc_show(struct seq_file *m, void *v) +static int __maybe_unused version_proc_show(struct seq_file *m, void *v) { seq_printf(m, "driver: %s\n", TOSHIBA_ACPI_VERSION); seq_printf(m, "proc_interface: %d\n", PROC_INTERFACE_VERSION);
On Fri, Sep 07, 2018 at 12:38:56AM +0000, Sasha Levin wrote:
From: Sebastian Andrzej Siewior bigeasy@linutronix.de
[ Upstream commit 6f3fde684d0232e66ada3410f016a58e09a87689 ]
The USB completion callback does not disable interrupts while acquiring the lock. We want to remove the local_irq_disable() invocation from __usb_hcd_giveback_urb() and therefore it is required for the callback handler to disable the interrupts while acquiring the lock. The callback may be invoked either in IRQ or BH context depending on the USB host controller. Use the _irqsave() variant of the locking primitives.
Cc: Greg Kroah-Hartman gregkh@linuxfoundation.org Acked-by: Alan Stern stern@rowland.harvard.edu Signed-off-by: Sebastian Andrzej Siewior bigeasy@linutronix.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin alexander.levin@microsoft.com
drivers/usb/misc/usbtest.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)
And dropped here.
linux-stable-mirror@lists.linaro.org
-
Greg Kroah-Hartman -
Sasha Levin