4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Anna-Maria Gleixner anna-maria@linutronix.de

commit 48d0c9becc7f3c66874c100c126459a9da0fdced upstream.

The POSIX specification defines that relative CLOCK_REALTIME timers are not affected by clock modifications. Those timers have to use CLOCK_MONOTONIC to ensure POSIX compliance.

The introduction of the additional HRTIMER_MODE_PINNED mode broke this requirement for pinned timers.

There is no user space visible impact because user space timers are not using pinned mode, but for consistency reasons this needs to be fixed.

Check whether the mode has the HRTIMER_MODE_REL bit set instead of comparing with HRTIMER_MODE_ABS.

Signed-off-by: Anna-Maria Gleixner anna-maria@linutronix.de Cc: Christoph Hellwig hch@lst.de Cc: John Stultz john.stultz@linaro.org Cc: Linus Torvalds torvalds@linux-foundation.org Cc: Peter Zijlstra peterz@infradead.org Cc: Thomas Gleixner tglx@linutronix.de Cc: keescook@chromium.org Fixes: 597d0275736d ("timers: Framework for identifying pinned timers") Link: http://lkml.kernel.org/r/20171221104205.7269-7-anna-maria@linutronix.de Signed-off-by: Ingo Molnar mingo@kernel.org Cc: Mike Galbraith efault@gmx.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- kernel/time/hrtimer.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)

--- a/kernel/time/hrtimer.c +++ b/kernel/time/hrtimer.c @@ -1134,7 +1134,12 @@ static void __hrtimer_init(struct hrtime

cpu_base = raw_cpu_ptr(&hrtimer_bases);

- if (clock_id == CLOCK_REALTIME && mode != HRTIMER_MODE_ABS) + /* + * POSIX magic: Relative CLOCK_REALTIME timers are not affected by + * clock modifications, so they needs to become CLOCK_MONOTONIC to + * ensure POSIX compliance. + */ + if (clock_id == CLOCK_REALTIME && mode & HRTIMER_MODE_REL) clock_id = CLOCK_MONOTONIC;

base = hrtimer_clockid_to_base(clock_id);

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Andreas Platschek andreas.platschek@opentech.at

[ Upstream commit 2610acf46b9ed528ec2cacd717bc9d354e452b73 ]

Previously enabled clks are only disabled if clk_prepare_enable() fails. However, there are other error paths were the previously enabled clocks are not disabled.

To fix the problem, fsl_disable_clocks() now takes the number of clocks that shall be disabled + unprepared. For existing calls were all clocks were already successfully prepared + enabled, DMAMUX_NR is passed to disable + unprepare all clocks.

In error paths were only some clocks were successfully prepared + enabled the loop counter is passed, in order to disable + unprepare all successfully prepared + enabled clocks.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Andreas Platschek andreas.platschek@opentech.at Signed-off-by: Vinod Koul vinod.koul@intel.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/dma/fsl-edma.c | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-)

--- a/drivers/dma/fsl-edma.c +++ b/drivers/dma/fsl-edma.c @@ -863,11 +863,11 @@ static void fsl_edma_irq_exit( } }

-static void fsl_disable_clocks(struct fsl_edma_engine *fsl_edma) +static void fsl_disable_clocks(struct fsl_edma_engine *fsl_edma, int nr_clocks) { int i;

- for (i = 0; i < DMAMUX_NR; i++) + for (i = 0; i < nr_clocks; i++) clk_disable_unprepare(fsl_edma->muxclk[i]); }

@@ -904,25 +904,25 @@ static int fsl_edma_probe(struct platfor

res = platform_get_resource(pdev, IORESOURCE_MEM, 1 + i); fsl_edma->muxbase[i] = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(fsl_edma->muxbase[i])) + if (IS_ERR(fsl_edma->muxbase[i])) { + /* on error: disable all previously enabled clks */ + fsl_disable_clocks(fsl_edma, i); return PTR_ERR(fsl_edma->muxbase[i]); + }

sprintf(clkname, "dmamux%d", i); fsl_edma->muxclk[i] = devm_clk_get(&pdev->dev, clkname); if (IS_ERR(fsl_edma->muxclk[i])) { dev_err(&pdev->dev, "Missing DMAMUX block clock.\n"); + /* on error: disable all previously enabled clks */ + fsl_disable_clocks(fsl_edma, i); return PTR_ERR(fsl_edma->muxclk[i]); }

ret = clk_prepare_enable(fsl_edma->muxclk[i]); - if (ret) { - /* disable only clks which were enabled on error */ - for (; i >= 0; i--) - clk_disable_unprepare(fsl_edma->muxclk[i]); - - dev_err(&pdev->dev, "DMAMUX clk block failed.\n"); - return ret; - } + if (ret) + /* on error: disable all previously enabled clks */ + fsl_disable_clocks(fsl_edma, i);

}

@@ -976,7 +976,7 @@ static int fsl_edma_probe(struct platfor if (ret) { dev_err(&pdev->dev, "Can't register Freescale eDMA engine. (%d)\n", ret); - fsl_disable_clocks(fsl_edma); + fsl_disable_clocks(fsl_edma, DMAMUX_NR); return ret; }

@@ -985,7 +985,7 @@ static int fsl_edma_probe(struct platfor dev_err(&pdev->dev, "Can't register Freescale eDMA of_dma. (%d)\n", ret); dma_async_device_unregister(&fsl_edma->dma_dev); - fsl_disable_clocks(fsl_edma); + fsl_disable_clocks(fsl_edma, DMAMUX_NR); return ret; }

@@ -1015,7 +1015,7 @@ static int fsl_edma_remove(struct platfo fsl_edma_cleanup_vchan(&fsl_edma->dma_dev); of_dma_controller_free(np); dma_async_device_unregister(&fsl_edma->dma_dev); - fsl_disable_clocks(fsl_edma); + fsl_disable_clocks(fsl_edma, DMAMUX_NR);

return 0; }

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Sascha Hauer s.hauer@pengutronix.de

[ Upstream commit fdf2e821052958a114618a95ab18a300d0b080cb ]

When erased subpages are read then the BCH decoder returns STATUS_ERASED if they are all empty, or STATUS_UNCORRECTABLE if there are bitflips. When there are bitflips, we have to set these bits again to show the upper layers a completely erased page. When a bitflip happens in the exact byte where the bad block marker is, then this byte is swapped with another byte in block_mark_swapping(). The correction code then detects a bitflip in another subpage and no longer corrects the bitflip where it really happens.

Correct this behaviour by calling block_mark_swapping() after the bitflips have been corrected.

In our case UBIFS failed with this bug because it expects erased pages to be really empty:

UBIFS error (pid 187): ubifs_scan: corrupt empty space at LEB 36:118735 UBIFS error (pid 187): ubifs_scanned_corruption: corruption at LEB 36:118735 UBIFS error (pid 187): ubifs_scanned_corruption: first 8192 bytes from LEB 36:118735 UBIFS error (pid 187): ubifs_scan: LEB 36 scanning failed UBIFS error (pid 187): do_commit: commit failed, error -117

Signed-off-by: Sascha Hauer s.hauer@pengutronix.de Reviewed-by: Richard Weinberger richard@nod.at Acked-by: Boris Brezillon boris.brezillon@free-electrons.com Signed-off-by: Richard Weinberger richard@nod.at Signed-off-by: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c @@ -1059,9 +1059,6 @@ static int gpmi_ecc_read_page(struct mtd return ret; }

- /* handle the block mark swapping */ - block_mark_swapping(this, payload_virt, auxiliary_virt); - /* Loop over status bytes, accumulating ECC status. */ status = auxiliary_virt + nfc_geo->auxiliary_status_offset;

@@ -1150,6 +1147,9 @@ static int gpmi_ecc_read_page(struct mtd max_bitflips = max_t(unsigned int, max_bitflips, *status); }

+ /* handle the block mark swapping */ + block_mark_swapping(this, buf, auxiliary_virt); + if (oob_required) { /* * It's time to deliver the OOB bytes. See gpmi_ecc_read_oob()

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Brendan McGrath redmcg@redmandi.dyndns.org

[ Upstream commit 588753f1eb18978512b1c9b85fddb457d46f9033 ]

One example of when an ICMPv6 packet is required to be looped back is when a host acts as both a Multicast Listener and a Multicast Router.

A Multicast Router will listen on address ff02::16 for MLDv2 messages.

Currently, MLDv2 messages originating from a Multicast Listener running on the same host as the Multicast Router are not being delivered to the Multicast Router. This is due to dst.input being assigned the default value of dst_discard.

This results in the packet being looped back but discarded before being delivered to the Multicast Router.

This patch sets dst.input to ip6_input to ensure a looped back packet is delivered to the Multicast Router.

Signed-off-by: Brendan McGrath redmcg@redmandi.dyndns.org Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/ipv6/route.c | 1 + 1 file changed, 1 insertion(+)

--- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -1651,6 +1651,7 @@ struct dst_entry *icmp6_dst_alloc(struct }

rt->dst.flags |= DST_HOST; + rt->dst.input = ip6_input; rt->dst.output = ip6_output; atomic_set(&rt->dst.__refcnt, 1); rt->rt6i_gateway = fl6->daddr;

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Arnaldo Carvalho de Melo acme@redhat.com

[ Upstream commit ca26cffa4e4aaeb09bb9e308f95c7835cb149248 ]

Up to f5caf621ee35 ("x86/asm: Fix inline asm call constraints for Clang") we were able to use x86 headers to build to the 'bpf' clang target, as done by the BPF code in tools/perf/.

With that commit, we ended up with following failure for 'perf test LLVM', this is because "clang ... -target bpf ..." fails since 4.0 does not have bpf inline asm support and 6.0 does not recognize the register 'esp', fix it by guarding that part with an #ifndef __BPF__, that is defined by clang when building to the "bpf" target.

# perf test -v LLVM 37: LLVM search and compile : 37.1: Basic BPF llvm compile : --- start --- test child forked, pid 25526 Kernel build dir is set to /lib/modules/4.14.0+/build set env: KBUILD_DIR=/lib/modules/4.14.0+/build unset env: KBUILD_OPTS include option is set to -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/7/include -I/home/acme/git/linux/arch/x86/include -I./arch/x86/include/generated -I/home/acme/git/linux/include -I./include -I/home/acme/git/linux/arch/x86/include/uapi -I./arch/x86/include/generated/uapi -I/home/acme/git/linux/include/uapi -I./include/generated/uapi -include /home/acme/git/linux/include/linux/kconfig.h set env: NR_CPUS=4 set env: LINUX_VERSION_CODE=0x40e00 set env: CLANG_EXEC=/usr/local/bin/clang set env: CLANG_OPTIONS=-xc set env: KERNEL_INC_OPTIONS= -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/7/include -I/home/acme/git/linux/arch/x86/include -I./arch/x86/include/generated -I/home/acme/git/linux/include -I./include -I/home/acme/git/linux/arch/x86/include/uapi -I./arch/x86/include/generated/uapi -I/home/acme/git/linux/include/uapi -I./include/generated/uapi -include /home/acme/git/linux/include/linux/kconfig.h set env: WORKING_DIR=/lib/modules/4.14.0+/build set env: CLANG_SOURCE=- llvm compiling command template: echo '/* * bpf-script-example.c * Test basic LLVM building */ #ifndef LINUX_VERSION_CODE # error Need LINUX_VERSION_CODE # error Example: for 4.2 kernel, put 'clang-opt="-DLINUX_VERSION_CODE=0x40200" into llvm section of ~/.perfconfig' #endif #define BPF_ANY 0 #define BPF_MAP_TYPE_ARRAY 2 #define BPF_FUNC_map_lookup_elem 1 #define BPF_FUNC_map_update_elem 2

static void *(*bpf_map_lookup_elem)(void *map, void *key) = (void *) BPF_FUNC_map_lookup_elem; static void *(*bpf_map_update_elem)(void *map, void *key, void *value, int flags) = (void *) BPF_FUNC_map_update_elem;

struct bpf_map_def { unsigned int type; unsigned int key_size; unsigned int value_size; unsigned int max_entries; };

#define SEC(NAME) __attribute__((section(NAME), used)) struct bpf_map_def SEC("maps") flip_table = { .type = BPF_MAP_TYPE_ARRAY, .key_size = sizeof(int), .value_size = sizeof(int), .max_entries = 1, };

SEC("func=SyS_epoll_wait") int bpf_func__SyS_epoll_wait(void *ctx) { int ind =0; int *flag = bpf_map_lookup_elem(&flip_table, &ind); int new_flag; if (!flag) return 0; /* flip flag and store back */ new_flag = !*flag; bpf_map_update_elem(&flip_table, &ind, &new_flag, BPF_ANY); return new_flag; } char _license[] SEC("license") = "GPL"; int _version SEC("version") = LINUX_VERSION_CODE; ' | $CLANG_EXEC -D__KERNEL__ -D__NR_CPUS__=$NR_CPUS -DLINUX_VERSION_CODE=$LINUX_VERSION_CODE $CLANG_OPTIONS $KERNEL_INC_OPTIONS -Wno-unused-value -Wno-pointer-sign -working-directory $WORKING_DIR -c "$CLANG_SOURCE" -target bpf -O2 -o - test child finished with 0 ---- end ---- LLVM search and compile subtest 0: Ok 37.2: kbuild searching : --- start --- test child forked, pid 25950 Kernel build dir is set to /lib/modules/4.14.0+/build set env: KBUILD_DIR=/lib/modules/4.14.0+/build unset env: KBUILD_OPTS include option is set to -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/7/include -I/home/acme/git/linux/arch/x86/include -I./arch/x86/include/generated -I/home/acme/git/linux/include -I./include -I/home/acme/git/linux/arch/x86/include/uapi -I./arch/x86/include/generated/uapi -I/home/acme/git/linux/include/uapi -I./include/generated/uapi -include /home/acme/git/linux/include/linux/kconfig.h set env: NR_CPUS=4 set env: LINUX_VERSION_CODE=0x40e00 set env: CLANG_EXEC=/usr/local/bin/clang set env: CLANG_OPTIONS=-xc set env: KERNEL_INC_OPTIONS= -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/7/include -I/home/acme/git/linux/arch/x86/include -I./arch/x86/include/generated -I/home/acme/git/linux/include -I./include -I/home/acme/git/linux/arch/x86/include/uapi -I./arch/x86/include/generated/uapi -I/home/acme/git/linux/include/uapi -I./include/generated/uapi -include /home/acme/git/linux/include/linux/kconfig.h set env: WORKING_DIR=/lib/modules/4.14.0+/build set env: CLANG_SOURCE=- llvm compiling command template: echo '/* * bpf-script-test-kbuild.c * Test include from kernel header */ #ifndef LINUX_VERSION_CODE # error Need LINUX_VERSION_CODE # error Example: for 4.2 kernel, put 'clang-opt="-DLINUX_VERSION_CODE=0x40200" into llvm section of ~/.perfconfig' #endif #define SEC(NAME) __attribute__((section(NAME), used))

#include <uapi/linux/fs.h> #include <uapi/asm/ptrace.h>

SEC("func=vfs_llseek") int bpf_func__vfs_llseek(void *ctx) { return 0; }

char _license[] SEC("license") = "GPL"; int _version SEC("version") = LINUX_VERSION_CODE; ' | $CLANG_EXEC -D__KERNEL__ -D__NR_CPUS__=$NR_CPUS -DLINUX_VERSION_CODE=$LINUX_VERSION_CODE $CLANG_OPTIONS $KERNEL_INC_OPTIONS -Wno-unused-value -Wno-pointer-sign -working-directory $WORKING_DIR -c "$CLANG_SOURCE" -target bpf -O2 -o - In file included from <stdin>:12: In file included from /home/acme/git/linux/arch/x86/include/uapi/asm/ptrace.h:5: In file included from /home/acme/git/linux/include/linux/compiler.h:242: In file included from /home/acme/git/linux/arch/x86/include/asm/barrier.h:5: In file included from /home/acme/git/linux/arch/x86/include/asm/alternative.h:10: /home/acme/git/linux/arch/x86/include/asm/asm.h:145:50: error: unknown register name 'esp' in asm register unsigned long current_stack_pointer asm(_ASM_SP); ^ /home/acme/git/linux/arch/x86/include/asm/asm.h:44:18: note: expanded from macro '_ASM_SP' #define _ASM_SP __ASM_REG(sp) ^ /home/acme/git/linux/arch/x86/include/asm/asm.h:27:32: note: expanded from macro '__ASM_REG' #define __ASM_REG(reg) __ASM_SEL_RAW(e##reg, r##reg) ^ /home/acme/git/linux/arch/x86/include/asm/asm.h:18:29: note: expanded from macro '__ASM_SEL_RAW' # define __ASM_SEL_RAW(a,b) __ASM_FORM_RAW(a) ^ /home/acme/git/linux/arch/x86/include/asm/asm.h:11:32: note: expanded from macro '__ASM_FORM_RAW' # define __ASM_FORM_RAW(x) #x ^ <scratch space>:4:1: note: expanded from here "esp" ^ 1 error generated. ERROR: unable to compile - Hint: Check error message shown above. Hint: You can also pre-compile it into .o using: clang -target bpf -O2 -c - with proper -I and -D options. Failed to compile test case: 'kbuild searching' test child finished with -1 ---- end ---- LLVM search and compile subtest 1: FAILED!

Cc: Adrian Hunter adrian.hunter@intel.com Cc: Alexander Potapenko glider@google.com Cc: Alexei Starovoitov alexei.starovoitov@gmail.com Cc: Andrey Ryabinin aryabinin@virtuozzo.com Cc: Andy Lutomirski luto@kernel.org Cc: Arnd Bergmann arnd@arndb.de Cc: Daniel Borkmann daniel@iogearbox.net Cc: David Ahern dsahern@gmail.com Cc: Dmitriy Vyukov dvyukov@google.com Cc: Jiri Olsa jolsa@kernel.org Cc: Josh Poimboeuf jpoimboe@redhat.com Cc: Linus Torvalds torvalds@linux-foundation.org Cc: Matthias Kaehlcke mka@chromium.org Cc: Miguel Bernal Marin miguel.bernal.marin@linux.intel.com Cc: Namhyung Kim namhyung@kernel.org Cc: Peter Zijlstra peterz@infradead.org Cc: Thomas Gleixner tglx@linutronix.de Cc: Wang Nan wangnan0@huawei.com Cc: Yonghong Song yhs@fb.com Link: https://lkml.kernel.org/r/20171128175948.GL3298@kernel.org Signed-off-by: Arnaldo Carvalho de Melo acme@redhat.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/x86/include/asm/asm.h | 2 ++ 1 file changed, 2 insertions(+)

--- a/arch/x86/include/asm/asm.h +++ b/arch/x86/include/asm/asm.h @@ -128,6 +128,7 @@ #endif

#ifndef __ASSEMBLY__ +#ifndef __BPF__ /* * This output constraint should be used for any inline asm which has a "call" * instruction. Otherwise the asm may be inserted before the frame pointer @@ -137,5 +138,6 @@ register unsigned long current_stack_pointer asm(_ASM_SP); #define ASM_CALL_CONSTRAINT "+r" (current_stack_pointer) #endif +#endif

#endif /* _ASM_X86_ASM_H */

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Alexey Khoroshilov khoroshilov@ispras.ru

[ Upstream commit ab14436065c8066c265540312742390d6d07ddd2 ]

There are several error paths in xgene_mdio_probe(), where clk is left undisabled. The patch fixes them.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov khoroshilov@ispras.ru Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/phy/mdio-xgene.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-)

--- a/drivers/net/phy/mdio-xgene.c +++ b/drivers/net/phy/mdio-xgene.c @@ -197,8 +197,11 @@ static int xgene_mdio_reset(struct xgene }

ret = xgene_enet_ecc_init(pdata); - if (ret) + if (ret) { + if (pdata->dev->of_node) + clk_disable_unprepare(pdata->clk); return ret; + } xgene_gmac_reset(pdata);

return 0; @@ -364,8 +367,10 @@ static int xgene_mdio_probe(struct platf return ret;

mdio_bus = mdiobus_alloc(); - if (!mdio_bus) - return -ENOMEM; + if (!mdio_bus) { + ret = -ENOMEM; + goto out_clk; + }

mdio_bus->name = "APM X-Gene MDIO bus";

@@ -394,7 +399,7 @@ static int xgene_mdio_probe(struct platf mdio_bus->phy_mask = ~0; ret = mdiobus_register(mdio_bus); if (ret) - goto out; + goto out_mdiobus;

acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_HANDLE(dev), 1, acpi_register_phy, NULL, mdio_bus, NULL); @@ -402,16 +407,20 @@ static int xgene_mdio_probe(struct platf }

if (ret) - goto out; + goto out_mdiobus;

pdata->mdio_bus = mdio_bus; xgene_mdio_status = true;

return 0;

-out: +out_mdiobus: mdiobus_free(mdio_bus);

+out_clk: + if (dev->of_node) + clk_disable_unprepare(pdata->clk); + return ret; }

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jia-Ju Bai baijiaju1990@163.com

[ Upstream commit 162bd5e5fd921785077b5862d8f2ffabe2fe11e5 ]

The driver may sleep under a spinlock. The function call path is: hwsim_get_radio_nl (acquire the spinlock) nlmsg_new(GFP_KERNEL) --> may sleep

To fix it, GFP_KERNEL is replaced with GFP_ATOMIC.

This bug is found by my static analysis tool(DSAC) and checked by my code review.

Signed-off-by: Jia-Ju Bai baijiaju1990@163.com Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/wireless/mac80211_hwsim.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -3154,7 +3154,7 @@ static int hwsim_get_radio_nl(struct sk_ if (!net_eq(wiphy_net(data->hw->wiphy), genl_info_net(info))) continue;

- skb = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL); + skb = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_ATOMIC); if (!skb) { res = -ENOMEM; goto out_err;

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Abhijeet Kumar abhijeet.kumar@intel.com

[ Upstream commit d070f7c703ef26e3db613f24206823f916272fc6 ]

In skylake platform, we hear a loud pop noise(0 dB) at start of audio capture power up sequence. This patch removes the pop noise from the recording by adding a delay before enabling ADC.

Signed-off-by: Abhijeet Kumar abhijeet.kumar@intel.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/soc/codecs/nau8825.c | 1 + 1 file changed, 1 insertion(+)

--- a/sound/soc/codecs/nau8825.c +++ b/sound/soc/codecs/nau8825.c @@ -882,6 +882,7 @@ static int nau8825_adc_event(struct snd_

switch (event) { case SND_SOC_DAPM_POST_PMU: + msleep(125); regmap_update_bits(nau8825->regmap, NAU8825_REG_ENA_CTRL, NAU8825_ENABLE_ADC, NAU8825_ENABLE_ADC); break;

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Alexander Kochetkov al.kochet@gmail.com

[ Upstream commit e688822d035b494071ecbadcccbd6f3325fb0f59 ]

arc_emac_rx() has some issues found by code review.

In case netdev_alloc_skb_ip_align() or dma_map_single() failure rx fifo entry will not be returned to EMAC.

In case dma_map_single() failure previously allocated skb became lost to driver. At the same time address of newly allocated skb will not be provided to EMAC.

Signed-off-by: Alexander Kochetkov al.kochet@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/arc/emac_main.c | 53 ++++++++++++++++++++--------------- 1 file changed, 31 insertions(+), 22 deletions(-)

--- a/drivers/net/ethernet/arc/emac_main.c +++ b/drivers/net/ethernet/arc/emac_main.c @@ -210,39 +210,48 @@ static int arc_emac_rx(struct net_device continue; }

- pktlen = info & LEN_MASK; - stats->rx_packets++; - stats->rx_bytes += pktlen; - skb = rx_buff->skb; - skb_put(skb, pktlen); - skb->dev = ndev; - skb->protocol = eth_type_trans(skb, ndev); - - dma_unmap_single(&ndev->dev, dma_unmap_addr(rx_buff, addr), - dma_unmap_len(rx_buff, len), DMA_FROM_DEVICE); - - /* Prepare the BD for next cycle */ - rx_buff->skb = netdev_alloc_skb_ip_align(ndev, - EMAC_BUFFER_SIZE); - if (unlikely(!rx_buff->skb)) { + /* Prepare the BD for next cycle. netif_receive_skb() + * only if new skb was allocated and mapped to avoid holes + * in the RX fifo. + */ + skb = netdev_alloc_skb_ip_align(ndev, EMAC_BUFFER_SIZE); + if (unlikely(!skb)) { + if (net_ratelimit()) + netdev_err(ndev, "cannot allocate skb\n"); + /* Return ownership to EMAC */ + rxbd->info = cpu_to_le32(FOR_EMAC | EMAC_BUFFER_SIZE); stats->rx_errors++; - /* Because receive_skb is below, increment rx_dropped */ stats->rx_dropped++; continue; }

- /* receive_skb only if new skb was allocated to avoid holes */ - netif_receive_skb(skb); - - addr = dma_map_single(&ndev->dev, (void *)rx_buff->skb->data, + addr = dma_map_single(&ndev->dev, (void *)skb->data, EMAC_BUFFER_SIZE, DMA_FROM_DEVICE); if (dma_mapping_error(&ndev->dev, addr)) { if (net_ratelimit()) - netdev_err(ndev, "cannot dma map\n"); - dev_kfree_skb(rx_buff->skb); + netdev_err(ndev, "cannot map dma buffer\n"); + dev_kfree_skb(skb); + /* Return ownership to EMAC */ + rxbd->info = cpu_to_le32(FOR_EMAC | EMAC_BUFFER_SIZE); stats->rx_errors++; + stats->rx_dropped++; continue; } + + /* unmap previosly mapped skb */ + dma_unmap_single(&ndev->dev, dma_unmap_addr(rx_buff, addr), + dma_unmap_len(rx_buff, len), DMA_FROM_DEVICE); + + pktlen = info & LEN_MASK; + stats->rx_packets++; + stats->rx_bytes += pktlen; + skb_put(rx_buff->skb, pktlen); + rx_buff->skb->dev = ndev; + rx_buff->skb->protocol = eth_type_trans(rx_buff->skb, ndev); + + netif_receive_skb(rx_buff->skb); + + rx_buff->skb = skb; dma_unmap_addr_set(rx_buff, addr, addr); dma_unmap_len_set(rx_buff, len, EMAC_BUFFER_SIZE);

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Fredrik Hallenberg megahallon@gmail.com

[ Upstream commit 200922c93f008e03ddc804c6dacdf26ca1ba86d7 ]

When using GMAC4 the value written in PTP_SSIR should be shifted however the shifted value is also used in subsequent calculations which results in a bad timestamp value.

Signed-off-by: Fredrik Hallenberg megahallon@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c @@ -38,6 +38,7 @@ static u32 stmmac_config_sub_second_incr { u32 value = readl(ioaddr + PTP_TCR); unsigned long data; + u32 reg_value;

/* For GMAC3.x, 4.x versions, convert the ptp_clock to nano second * formula = (1/ptp_clock) * 1000000000 @@ -54,10 +55,11 @@ static u32 stmmac_config_sub_second_incr

data &= PTP_SSIR_SSINC_MASK;

+ reg_value = data; if (gmac4) - data = data << GMAC4_PTP_SSIR_SSINC_SHIFT; + reg_value <<= GMAC4_PTP_SSIR_SSINC_SHIFT;

- writel(data, ioaddr + PTP_SSIR); + writel(reg_value, ioaddr + PTP_SSIR);

return data; }

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann arnd@arndb.de

[ Upstream commit 506e8a912661c97b41adc8a286b875d01323ec45 ]

dtc warns about two 'clocks' properties that have an extraneous '1' at the end:

arch/arm/boot/dts/ls1021a-qds.dtb: Warning (clocks_property): arch/arm/boot/dts/ls1021a-twr.dtb: Warning (clocks_property): Property 'clocks', cell 1 is not a phandle reference in /soc/i2c@2180000/mux@77/i2c@4/sgtl5000@2a arch/arm/boot/dts/ls1021a-qds.dtb: Warning (clocks_property): Missing property '#clock-cells' in node /soc/interrupt-controller@1400000 or bad phandle (referred from /soc/i2c@2180000/mux@77/i2c@4/sgtl5000@2a:clocks[1]) Property 'clocks', cell 1 is not a phandle reference in /soc/i2c@2190000/sgtl5000@a arch/arm/boot/dts/ls1021a-twr.dtb: Warning (clocks_property): Missing property '#clock-cells' in node /soc/interrupt-controller@1400000 or bad phandle (referred from /soc/i2c@2190000/sgtl5000@a:clocks[1])

The clocks that get referenced here are fixed-rate, so they do not take any argument, and dtc interprets the next cell as a phandle, which is invalid.

Signed-off-by: Arnd Bergmann arnd@arndb.de Signed-off-by: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/arm/boot/dts/ls1021a-qds.dts | 2 +- arch/arm/boot/dts/ls1021a-twr.dts | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)

--- a/arch/arm/boot/dts/ls1021a-qds.dts +++ b/arch/arm/boot/dts/ls1021a-qds.dts @@ -215,7 +215,7 @@ reg = <0x2a>; VDDA-supply = <&reg_3p3v>; VDDIO-supply = <&reg_3p3v>; - clocks = <&sys_mclk 1>; + clocks = <&sys_mclk>; }; }; }; --- a/arch/arm/boot/dts/ls1021a-twr.dts +++ b/arch/arm/boot/dts/ls1021a-twr.dts @@ -187,7 +187,7 @@ reg = <0x0a>; VDDA-supply = <&reg_3p3v>; VDDIO-supply = <&reg_3p3v>; - clocks = <&sys_mclk 1>; + clocks = <&sys_mclk>; }; };

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Tommi Rantala tommi.t.rantala@nokia.com

[ Upstream commit 19142551b2be4a9e13838099fde1351386e5e007 ]

Fix memory leak in tipc_enable_bearer() if enable_media() fails, and cleanup with bearer_disable() if tipc_mon_create() fails.

Acked-by: Ying Xue ying.xue@windriver.com Acked-by: Jon Maloy jon.maloy@ericsson.com Signed-off-by: Tommi Rantala tommi.t.rantala@nokia.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/tipc/bearer.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/net/tipc/bearer.c +++ b/net/tipc/bearer.c @@ -322,6 +322,7 @@ restart: if (res) { pr_warn("Bearer <%s> rejected, enable failure (%d)\n", name, -res); + kfree(b); return -EINVAL; }

@@ -345,8 +346,10 @@ restart: if (skb) tipc_bearer_xmit_skb(net, bearer_id, skb, &b->bcast_addr);

- if (tipc_mon_create(net, bearer_id)) + if (tipc_mon_create(net, bearer_id)) { + bearer_disable(net, b); return -ENOMEM; + }

pr_info("Enabled bearer <%s>, discovery domain %s, priority %u\n", name,

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Siva Reddy Kallam siva.kallam@broadcom.com

[ Upstream commit 4419bb1cedcda0272e1dc410345c5a1d1da0e367 ]

One of AMD based server with 5762 hangs with jumbo frame traffic. This AMD platform has southbridge limitation which is restricting MRRS to 4000. As a work around, driver to restricts the MRRS to 2048 for this particular 5762 NX1 card.

Signed-off-by: Siva Reddy Kallam siva.kallam@broadcom.com Signed-off-by: Michael Chan michael.chan@broadcom.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/broadcom/tg3.c | 10 ++++++++++ drivers/net/ethernet/broadcom/tg3.h | 4 ++++ 2 files changed, 14 insertions(+)

--- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -10049,6 +10049,16 @@ static int tg3_reset_hw(struct tg3 *tp,

tw32(GRC_MODE, tp->grc_mode | val);

+ /* On one of the AMD platform, MRRS is restricted to 4000 because of + * south bridge limitation. As a workaround, Driver is setting MRRS + * to 2048 instead of default 4096. + */ + if (tp->pdev->subsystem_vendor == PCI_VENDOR_ID_DELL && + tp->pdev->subsystem_device == TG3PCI_SUBDEVICE_ID_DELL_5762) { + val = tr32(TG3PCI_DEV_STATUS_CTRL) & ~MAX_READ_REQ_MASK; + tw32(TG3PCI_DEV_STATUS_CTRL, val | MAX_READ_REQ_SIZE_2048); + } + /* Setup the timer prescalar register. Clock is always 66Mhz. */ val = tr32(GRC_MISC_CFG); val &= ~0xff; --- a/drivers/net/ethernet/broadcom/tg3.h +++ b/drivers/net/ethernet/broadcom/tg3.h @@ -95,6 +95,7 @@ #define TG3PCI_SUBDEVICE_ID_DELL_JAGUAR 0x0106 #define TG3PCI_SUBDEVICE_ID_DELL_MERLOT 0x0109 #define TG3PCI_SUBDEVICE_ID_DELL_SLIM_MERLOT 0x010a +#define TG3PCI_SUBDEVICE_ID_DELL_5762 0x07f0 #define TG3PCI_SUBVENDOR_ID_COMPAQ PCI_VENDOR_ID_COMPAQ #define TG3PCI_SUBDEVICE_ID_COMPAQ_BANSHEE 0x007c #define TG3PCI_SUBDEVICE_ID_COMPAQ_BANSHEE_2 0x009a @@ -280,6 +281,9 @@ #define TG3PCI_STD_RING_PROD_IDX 0x00000098 /* 64-bit */ #define TG3PCI_RCV_RET_RING_CON_IDX 0x000000a0 /* 64-bit */ /* 0xa8 --> 0xb8 unused */ +#define TG3PCI_DEV_STATUS_CTRL 0x000000b4 +#define MAX_READ_REQ_SIZE_2048 0x00004000 +#define MAX_READ_REQ_MASK 0x00007000 #define TG3PCI_DUAL_MAC_CTRL 0x000000b8 #define DUAL_MAC_CTRL_CH_MASK 0x00000003 #define DUAL_MAC_CTRL_ID 0x00000004

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: "Guilherme G. Piccoli" gpiccoli@linux.vnet.ibm.com

[ Upstream commit f7084059a9cb9e56a186e1677b1dcffd76c2cd24 ]

While in recovery process of PCI error (called EEH on PowerPC arch), another PCI transaction could be corrupted causing a situation of nested PCI errors. Also, this scenario could be reproduced with error injection mechanisms (for debug purposes).

We observe that in case of nested PCI errors, bnx2x might attempt to initialize its shmem and cause a kernel crash due to bad addresses read from MCP. Multiple different stack traces were observed depending on the point the second PCI error happens.

This patch avoids the crashes by:

* failing PCI recovery in case of nested errors (since multiple PCI errors in a row are not expected to lead to a functional adapter anyway), and by,

* preventing access to adapter FW when MCP is failed (we mark it as failed when shmem cannot get initialized properly).

Reported-by: Abdul Haleem abdhalee@linux.vnet.ibm.com Signed-off-by: Guilherme G. Piccoli gpiccoli@linux.vnet.ibm.com Acked-by: Shahed Shaikh Shahed.Shaikh@cavium.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 4 ++-- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 14 +++++++++++++- 2 files changed, 15 insertions(+), 3 deletions(-)

--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -3034,7 +3034,7 @@ int bnx2x_nic_unload(struct bnx2x *bp, i

del_timer_sync(&bp->timer);

- if (IS_PF(bp)) { + if (IS_PF(bp) && !BP_NOMCP(bp)) { /* Set ALWAYS_ALIVE bit in shmem */ bp->fw_drv_pulse_wr_seq |= DRV_PULSE_ALWAYS_ALIVE; bnx2x_drv_pulse(bp); @@ -3120,7 +3120,7 @@ int bnx2x_nic_unload(struct bnx2x *bp, i bp->cnic_loaded = false;

/* Clear driver version indication in shmem */ - if (IS_PF(bp)) + if (IS_PF(bp) && !BP_NOMCP(bp)) bnx2x_update_mng_version(bp);

/* Check if there are pending parity attentions. If there are - set --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -9578,6 +9578,15 @@ static int bnx2x_init_shmem(struct bnx2x

do { bp->common.shmem_base = REG_RD(bp, MISC_REG_SHARED_MEM_ADDR); + + /* If we read all 0xFFs, means we are in PCI error state and + * should bail out to avoid crashes on adapter's FW reads. + */ + if (bp->common.shmem_base == 0xFFFFFFFF) { + bp->flags |= NO_MCP_FLAG; + return -ENODEV; + } + if (bp->common.shmem_base) { val = SHMEM_RD(bp, validity_map[BP_PORT(bp)]); if (val & SHR_MEM_VALIDITY_MB) @@ -14312,7 +14321,10 @@ static pci_ers_result_t bnx2x_io_slot_re BNX2X_ERR("IO slot reset --> driver unload\n");

/* MCP should have been reset; Need to wait for validity */ - bnx2x_init_shmem(bp); + if (bnx2x_init_shmem(bp)) { + rtnl_unlock(); + return PCI_ERS_RESULT_DISCONNECT; + }

if (IS_PF(bp) && SHMEM2_HAS(bp, drv_capabilities_flag)) { u32 v;

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Nitzan Carmi nitzanc@mellanox.com

[ Upstream commit 45e6ae7ef21b907dacb18da62d5787d74a31d860 ]

ibmr.device is being set only after ib_alloc_mr() is (successfully) complete. Therefore, in case mlx5_core_create_mkey() return with error, the error flow calls mlx5_free_priv_descs() which uses ibmr.device (which doesn't exist yet), causing a NULL dereference oops.

To fix this, the IB device should be set in the mr struct earlier stage (e.g. prior to calling mlx5_core_create_mkey()).

Fixes: 8a187ee52b04 ("IB/mlx5: Support the new memory registration API") Signed-off-by: Max Gurtovoy maxg@mellanox.com Signed-off-by: Nitzan Carmi nitzanc@mellanox.com Signed-off-by: Leon Romanovsky leon@kernel.org Signed-off-by: Jason Gunthorpe jgg@mellanox.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/infiniband/hw/mlx5/mr.c | 1 + 1 file changed, 1 insertion(+)

--- a/drivers/infiniband/hw/mlx5/mr.c +++ b/drivers/infiniband/hw/mlx5/mr.c @@ -1648,6 +1648,7 @@ struct ib_mr *mlx5_ib_alloc_mr(struct ib MLX5_SET(mkc, mkc, access_mode, mr->access_mode); MLX5_SET(mkc, mkc, umr_en, 1);

+ mr->ibmr.device = pd->device; err = mlx5_core_create_mkey(dev->mdev, &mr->mmkey, in, inlen); if (err) goto err_destroy_psv;

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Stefan Haberland sth@linux.vnet.ibm.com

[ Upstream commit 8a9bd4f8ebc6800bfc0596e28631ff6809a2f615 ]

We store per path and per device configuration data to identify the path or device correctly. The per path configuration data might get mixed up if the original request gets into error recovery and is started with a random path mask.

This would lead to a wrong identification of a path in case of a CUIR event for example.

Fix by copying the path mask from the original request to the error recovery request in case it is a path verification request.

Signed-off-by: Stefan Haberland sth@linux.vnet.ibm.com Reviewed-by: Jan Hoeppner hoeppner@linux.vnet.ibm.com Signed-off-by: Martin Schwidefsky schwidefsky@de.ibm.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/s390/block/dasd_3990_erp.c | 10 ++++++++++ 1 file changed, 10 insertions(+)

--- a/drivers/s390/block/dasd_3990_erp.c +++ b/drivers/s390/block/dasd_3990_erp.c @@ -2755,6 +2755,16 @@ dasd_3990_erp_action(struct dasd_ccw_req erp = dasd_3990_erp_handle_match_erp(cqr, erp); }

+ + /* + * For path verification work we need to stick with the path that was + * originally chosen so that the per path configuration data is + * assigned correctly. + */ + if (test_bit(DASD_CQR_VERIFY_PATH, &erp->flags) && cqr->lpm) { + erp->lpm = cqr->lpm; + } + if (device->features & DASD_FEATURE_ERPLOG) { /* print current erp_chain */ dev_err(&device->cdev->dev,

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Erez Shitrit erezsh@mellanox.com

[ Upstream commit 16ba3defb8bd01a9464ba4820a487f5b196b455b ]

When using enhanced mode for IPoIB, two threads may execute xmit in parallel to two different TX queues while the target is the same. In this case, both of them will add the same neighbor to the path's neigh link list and we might see the following message:

list_add double add: new=ffff88024767a348, prev=ffff88024767a348... WARNING: lib/list_debug.c:31__list_add_valid+0x4e/0x70 ipoib_start_xmit+0x477/0x680 [ib_ipoib] dev_hard_start_xmit+0xb9/0x3e0 sch_direct_xmit+0xf9/0x250 __qdisc_run+0x176/0x5d0 __dev_queue_xmit+0x1f5/0xb10 __dev_queue_xmit+0x55/0xb10

Analysis: Two SKB are scheduled to be transmitted from two cores. In ipoib_start_xmit, both gets NULL when calling ipoib_neigh_get. Two calls to neigh_add_path are made. One thread takes the spin-lock and calls ipoib_neigh_alloc which creates the neigh structure, then (after the __path_find) the neigh is added to the path's neigh link list. When the second thread enters the critical section it also calls ipoib_neigh_alloc but in this case it gets the already allocated ipoib_neigh structure, which is already linked to the path's neigh link list and adds it again to the list. Which beside of triggering the list, it creates a loop in the linked list. This loop leads to endless loop inside path_rec_completion.

Solution: Check list_empty(&neigh->list) before adding to the list. Add a similar fix in "ipoib_multicast.c::ipoib_mcast_send"

Fixes: b63b70d87741 ('IPoIB: Use a private hash table for path lookup in xmit path') Signed-off-by: Erez Shitrit erezsh@mellanox.com Reviewed-by: Alex Vesker valex@mellanox.com Signed-off-by: Leon Romanovsky leon@kernel.org Signed-off-by: Jason Gunthorpe jgg@mellanox.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/infiniband/ulp/ipoib/ipoib_main.c | 25 ++++++++++++++++++------- drivers/infiniband/ulp/ipoib/ipoib_multicast.c | 5 ++++- 2 files changed, 22 insertions(+), 8 deletions(-)

--- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -919,8 +919,8 @@ static int path_rec_start(struct net_dev return 0; }

-static void neigh_add_path(struct sk_buff *skb, u8 *daddr, - struct net_device *dev) +static struct ipoib_neigh *neigh_add_path(struct sk_buff *skb, u8 *daddr, + struct net_device *dev) { struct ipoib_dev_priv *priv = netdev_priv(dev); struct ipoib_path *path; @@ -933,7 +933,15 @@ static void neigh_add_path(struct sk_buf spin_unlock_irqrestore(&priv->lock, flags); ++dev->stats.tx_dropped; dev_kfree_skb_any(skb); - return; + return NULL; + } + + /* To avoid race condition, make sure that the + * neigh will be added only once. + */ + if (unlikely(!list_empty(&neigh->list))) { + spin_unlock_irqrestore(&priv->lock, flags); + return neigh; }

path = __path_find(dev, daddr + 4); @@ -971,7 +979,7 @@ static void neigh_add_path(struct sk_buf spin_unlock_irqrestore(&priv->lock, flags); ipoib_send(dev, skb, path->ah, IPOIB_QPN(daddr)); ipoib_neigh_put(neigh); - return; + return NULL; } } else { neigh->ah = NULL; @@ -988,7 +996,7 @@ static void neigh_add_path(struct sk_buf

spin_unlock_irqrestore(&priv->lock, flags); ipoib_neigh_put(neigh); - return; + return NULL;

err_path: ipoib_neigh_free(neigh); @@ -998,6 +1006,8 @@ err_drop:

spin_unlock_irqrestore(&priv->lock, flags); ipoib_neigh_put(neigh); + + return NULL; }

static void unicast_arp_send(struct sk_buff *skb, struct net_device *dev, @@ -1103,8 +1113,9 @@ static int ipoib_start_xmit(struct sk_bu case htons(ETH_P_TIPC): neigh = ipoib_neigh_get(dev, phdr->hwaddr); if (unlikely(!neigh)) { - neigh_add_path(skb, phdr->hwaddr, dev); - return NETDEV_TX_OK; + neigh = neigh_add_path(skb, phdr->hwaddr, dev); + if (likely(!neigh)) + return NETDEV_TX_OK; } break; case htons(ETH_P_ARP): --- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c @@ -818,7 +818,10 @@ void ipoib_mcast_send(struct net_device spin_lock_irqsave(&priv->lock, flags); if (!neigh) { neigh = ipoib_neigh_alloc(daddr, dev); - if (neigh) { + /* Make sure that the neigh will be added only + * once to mcast list. + */ + if (neigh && list_empty(&neigh->list)) { kref_get(&mcast->ah->ref); neigh->ah = mcast->ah; list_add_tail(&neigh->list, &mcast->neigh_list);

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Aliaksei Karaliou akaraliou.dev@gmail.com

[ Upstream commit 3a3882ff26fbdbaf5f7e13f6a0bccfbf7121041d ]

xfs_qm_init_quotainfo() does not check result of register_shrinker() which was tagged as __must_check recently, reported by sparse.

Signed-off-by: Aliaksei Karaliou akaraliou.dev@gmail.com [darrick: move xfs_qm_destroy_quotainos nearer xfs_qm_init_quotainos] Reviewed-by: Darrick J. Wong darrick.wong@oracle.com Signed-off-by: Darrick J. Wong darrick.wong@oracle.com

Signed-off-by: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/xfs/xfs_qm.c | 45 +++++++++++++++++++++++++++++---------------- 1 file changed, 29 insertions(+), 16 deletions(-)

--- a/fs/xfs/xfs_qm.c +++ b/fs/xfs/xfs_qm.c @@ -47,7 +47,7 @@ STATIC int xfs_qm_init_quotainos(xfs_mount_t *); STATIC int xfs_qm_init_quotainfo(xfs_mount_t *);

- +STATIC void xfs_qm_destroy_quotainos(xfs_quotainfo_t *qi); STATIC void xfs_qm_dqfree_one(struct xfs_dquot *dqp); /* * We use the batch lookup interface to iterate over the dquots as it @@ -694,9 +694,17 @@ xfs_qm_init_quotainfo( qinf->qi_shrinker.scan_objects = xfs_qm_shrink_scan; qinf->qi_shrinker.seeks = DEFAULT_SEEKS; qinf->qi_shrinker.flags = SHRINKER_NUMA_AWARE; - register_shrinker(&qinf->qi_shrinker); + + error = register_shrinker(&qinf->qi_shrinker); + if (error) + goto out_free_inos; + return 0;

+out_free_inos: + mutex_destroy(&qinf->qi_quotaofflock); + mutex_destroy(&qinf->qi_tree_lock); + xfs_qm_destroy_quotainos(qinf); out_free_lru: list_lru_destroy(&qinf->qi_lru); out_free_qinf: @@ -705,7 +713,6 @@ out_free_qinf: return error; }

- /* * Gets called when unmounting a filesystem or when all quotas get * turned off. @@ -722,19 +729,7 @@ xfs_qm_destroy_quotainfo(

unregister_shrinker(&qi->qi_shrinker); list_lru_destroy(&qi->qi_lru); - - if (qi->qi_uquotaip) { - IRELE(qi->qi_uquotaip); - qi->qi_uquotaip = NULL; /* paranoia */ - } - if (qi->qi_gquotaip) { - IRELE(qi->qi_gquotaip); - qi->qi_gquotaip = NULL; - } - if (qi->qi_pquotaip) { - IRELE(qi->qi_pquotaip); - qi->qi_pquotaip = NULL; - } + xfs_qm_destroy_quotainos(qi); mutex_destroy(&qi->qi_tree_lock); mutex_destroy(&qi->qi_quotaofflock); kmem_free(qi); @@ -1621,6 +1616,24 @@ error_rele: }

STATIC void +xfs_qm_destroy_quotainos( + xfs_quotainfo_t *qi) +{ + if (qi->qi_uquotaip) { + IRELE(qi->qi_uquotaip); + qi->qi_uquotaip = NULL; /* paranoia */ + } + if (qi->qi_gquotaip) { + IRELE(qi->qi_gquotaip); + qi->qi_gquotaip = NULL; + } + if (qi->qi_pquotaip) { + IRELE(qi->qi_pquotaip); + qi->qi_pquotaip = NULL; + } +} + +STATIC void xfs_qm_dqfree_one( struct xfs_dquot *dqp) {

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Tushar Dave tushar.n.dave@oracle.com

[ Upstream commit 0b76aae741abb9d16d2c0e67f8b1e766576f897d ]

This patch adds check so that driver does not disable already disabled device.

[ 44.637743] advantechwdt: Unexpected close, not stopping watchdog! [ 44.997548] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input6 [ 45.013419] e1000 0000:00:03.0: disabling already-disabled device [ 45.013447] ------------[ cut here ]------------ [ 45.014868] WARNING: CPU: 1 PID: 71 at drivers/pci/pci.c:1641 pci_disable_device+0xa1/0x105: pci_disable_device at drivers/pci/pci.c:1640 [ 45.016171] CPU: 1 PID: 71 Comm: rcu_perf_shutdo Not tainted 4.14.0-01330-g3c07399 #1 [ 45.017197] task: ffff88011bee9e40 task.stack: ffffc90000860000 [ 45.017987] RIP: 0010:pci_disable_device+0xa1/0x105: pci_disable_device at drivers/pci/pci.c:1640 [ 45.018603] RSP: 0000:ffffc90000863e30 EFLAGS: 00010286 [ 45.019282] RAX: 0000000000000035 RBX: ffff88013a230008 RCX: 0000000000000000 [ 45.020182] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000203 [ 45.021084] RBP: ffff88013a3f31e8 R08: 0000000000000001 R09: 0000000000000000 [ 45.021986] R10: ffffffff827ec29c R11: 0000000000000002 R12: 0000000000000001 [ 45.022946] R13: ffff88013a230008 R14: ffff880117802b20 R15: ffffc90000863e8f [ 45.023842] FS: 0000000000000000(0000) GS:ffff88013fd00000(0000) knlGS:0000000000000000 [ 45.024863] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 45.025583] CR2: ffffc900006d4000 CR3: 000000000220f000 CR4: 00000000000006a0 [ 45.026478] Call Trace: [ 45.026811] __e1000_shutdown+0x1d4/0x1e2: __e1000_shutdown at drivers/net/ethernet/intel/e1000/e1000_main.c:5162 [ 45.027344] ? rcu_perf_cleanup+0x2a1/0x2a1: rcu_perf_shutdown at kernel/rcu/rcuperf.c:627 [ 45.027883] e1000_shutdown+0x14/0x3a: e1000_shutdown at drivers/net/ethernet/intel/e1000/e1000_main.c:5235 [ 45.028351] device_shutdown+0x110/0x1aa: device_shutdown at drivers/base/core.c:2807 [ 45.028858] kernel_power_off+0x31/0x64: kernel_power_off at kernel/reboot.c:260 [ 45.029343] rcu_perf_shutdown+0x9b/0xa7: rcu_perf_shutdown at kernel/rcu/rcuperf.c:637 [ 45.029852] ? __wake_up_common_lock+0xa2/0xa2: autoremove_wake_function at kernel/sched/wait.c:376 [ 45.030414] kthread+0x126/0x12e: kthread at kernel/kthread.c:233 [ 45.030834] ? __kthread_bind_mask+0x8e/0x8e: kthread at kernel/kthread.c:190 [ 45.031399] ? ret_from_fork+0x1f/0x30: ret_from_fork at arch/x86/entry/entry_64.S:443 [ 45.031883] ? kernel_init+0xa/0xf5: kernel_init at init/main.c:997 [ 45.032325] ret_from_fork+0x1f/0x30: ret_from_fork at arch/x86/entry/entry_64.S:443 [ 45.032777] Code: 00 48 85 ed 75 07 48 8b ab a8 00 00 00 48 8d bb 98 00 00 00 e8 aa d1 11 00 48 89 ea 48 89 c6 48 c7 c7 d8 e4 0b 82 e8 55 7d da ff <0f> ff b9 01 00 00 00 31 d2 be 01 00 00 00 48 c7 c7 f0 b1 61 82 [ 45.035222] ---[ end trace c257137b1b1976ef ]--- [ 45.037838] ACPI: Preparing to enter system sleep state S5

Signed-off-by: Tushar Dave tushar.n.dave@oracle.com Tested-by: Fengguang Wu fengguang.wu@intel.com Signed-off-by: Jeff Kirsher jeffrey.t.kirsher@intel.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/intel/e1000/e1000.h | 3 +- drivers/net/ethernet/intel/e1000/e1000_main.c | 27 +++++++++++++++++++++----- 2 files changed, 24 insertions(+), 6 deletions(-)

--- a/drivers/net/ethernet/intel/e1000/e1000.h +++ b/drivers/net/ethernet/intel/e1000/e1000.h @@ -331,7 +331,8 @@ struct e1000_adapter { enum e1000_state_t { __E1000_TESTING, __E1000_RESETTING, - __E1000_DOWN + __E1000_DOWN, + __E1000_DISABLED };

#undef pr_fmt --- a/drivers/net/ethernet/intel/e1000/e1000_main.c +++ b/drivers/net/ethernet/intel/e1000/e1000_main.c @@ -940,7 +940,7 @@ static int e1000_init_hw_struct(struct e static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { struct net_device *netdev; - struct e1000_adapter *adapter; + struct e1000_adapter *adapter = NULL; struct e1000_hw *hw;

static int cards_found; @@ -950,6 +950,7 @@ static int e1000_probe(struct pci_dev *p u16 tmp = 0; u16 eeprom_apme_mask = E1000_EEPROM_APME; int bars, need_ioport; + bool disable_dev = false;

/* do not allocate ioport bars when not needed */ need_ioport = e1000_is_need_ioport(pdev); @@ -1250,11 +1251,13 @@ err_mdio_ioremap: iounmap(hw->ce4100_gbe_mdio_base_virt); iounmap(hw->hw_addr); err_ioremap: + disable_dev = !test_and_set_bit(__E1000_DISABLED, &adapter->flags); free_netdev(netdev); err_alloc_etherdev: pci_release_selected_regions(pdev, bars); err_pci_reg: - pci_disable_device(pdev); + if (!adapter || disable_dev) + pci_disable_device(pdev); return err; }

@@ -1272,6 +1275,7 @@ static void e1000_remove(struct pci_dev struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; + bool disable_dev;

e1000_down_and_stop(adapter); e1000_release_manageability(adapter); @@ -1290,9 +1294,11 @@ static void e1000_remove(struct pci_dev iounmap(hw->flash_address); pci_release_selected_regions(pdev, adapter->bars);

+ disable_dev = !test_and_set_bit(__E1000_DISABLED, &adapter->flags); free_netdev(netdev);

- pci_disable_device(pdev); + if (disable_dev) + pci_disable_device(pdev); }

/** @@ -5166,7 +5172,8 @@ static int __e1000_shutdown(struct pci_d if (netif_running(netdev)) e1000_free_irq(adapter);

- pci_disable_device(pdev); + if (!test_and_set_bit(__E1000_DISABLED, &adapter->flags)) + pci_disable_device(pdev);

return 0; } @@ -5210,6 +5217,10 @@ static int e1000_resume(struct pci_dev * pr_err("Cannot enable PCI device from suspend\n"); return err; } + + /* flush memory to make sure state is correct */ + smp_mb__before_atomic(); + clear_bit(__E1000_DISABLED, &adapter->flags); pci_set_master(pdev);

pci_enable_wake(pdev, PCI_D3hot, 0); @@ -5284,7 +5295,9 @@ static pci_ers_result_t e1000_io_error_d

if (netif_running(netdev)) e1000_down(adapter); - pci_disable_device(pdev); + + if (!test_and_set_bit(__E1000_DISABLED, &adapter->flags)) + pci_disable_device(pdev);

/* Request a slot slot reset. */ return PCI_ERS_RESULT_NEED_RESET; @@ -5312,6 +5325,10 @@ static pci_ers_result_t e1000_io_slot_re pr_err("Cannot re-enable PCI device after reset.\n"); return PCI_ERS_RESULT_DISCONNECT; } + + /* flush memory to make sure state is correct */ + smp_mb__before_atomic(); + clear_bit(__E1000_DISABLED, &adapter->flags); pci_set_master(pdev);

pci_enable_wake(pdev, PCI_D3hot, 0);

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Alexander Duyck alexander.h.duyck@intel.com

[ Upstream commit 248de22e638f10bd5bfc7624a357f940f66ba137 ]

The original code for __i40e_chk_linearize didn't take into account the fact that if a fragment is 16K in size or larger it has to be split over 2 descriptors and the smaller of those 2 descriptors will be on the trailing edge of the transmit. As a result we can get into situations where we didn't catch requests that could result in a Tx hang.

This patch takes care of that by subtracting the length of all but the trailing edge of the stale fragment before we test for sum. By doing this we can guarantee that we have all cases covered, including the case of a fragment that spans multiple descriptors. We don't need to worry about checking the inner portions of this since 12K is the maximum aligned DMA size and that is larger than any MSS will ever be since the MTU limit for jumbos is something on the order of 9K.

Signed-off-by: Alexander Duyck alexander.h.duyck@intel.com Tested-by: Andrew Bowers andrewx.bowers@intel.com Signed-off-by: Jeff Kirsher jeffrey.t.kirsher@intel.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/intel/i40e/i40e_txrx.c | 26 +++++++++++++++++++++++--- drivers/net/ethernet/intel/i40evf/i40e_txrx.c | 26 +++++++++++++++++++++++--- 2 files changed, 46 insertions(+), 6 deletions(-)

--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c +++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c @@ -2670,10 +2670,30 @@ bool __i40e_chk_linearize(struct sk_buff /* Walk through fragments adding latest fragment, testing it, and * then removing stale fragments from the sum. */ - stale = &skb_shinfo(skb)->frags[0]; - for (;;) { + for (stale = &skb_shinfo(skb)->frags[0];; stale++) { + int stale_size = skb_frag_size(stale); + sum += skb_frag_size(frag++);

+ /* The stale fragment may present us with a smaller + * descriptor than the actual fragment size. To account + * for that we need to remove all the data on the front and + * figure out what the remainder would be in the last + * descriptor associated with the fragment. + */ + if (stale_size > I40E_MAX_DATA_PER_TXD) { + int align_pad = -(stale->page_offset) & + (I40E_MAX_READ_REQ_SIZE - 1); + + sum -= align_pad; + stale_size -= align_pad; + + do { + sum -= I40E_MAX_DATA_PER_TXD_ALIGNED; + stale_size -= I40E_MAX_DATA_PER_TXD_ALIGNED; + } while (stale_size > I40E_MAX_DATA_PER_TXD); + } + /* if sum is negative we failed to make sufficient progress */ if (sum < 0) return true; @@ -2681,7 +2701,7 @@ bool __i40e_chk_linearize(struct sk_buff if (!nr_frags--) break;

- sum -= skb_frag_size(stale++); + sum -= stale_size; }

return false; --- a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c +++ b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c @@ -1872,10 +1872,30 @@ bool __i40evf_chk_linearize(struct sk_bu /* Walk through fragments adding latest fragment, testing it, and * then removing stale fragments from the sum. */ - stale = &skb_shinfo(skb)->frags[0]; - for (;;) { + for (stale = &skb_shinfo(skb)->frags[0];; stale++) { + int stale_size = skb_frag_size(stale); + sum += skb_frag_size(frag++);

+ /* The stale fragment may present us with a smaller + * descriptor than the actual fragment size. To account + * for that we need to remove all the data on the front and + * figure out what the remainder would be in the last + * descriptor associated with the fragment. + */ + if (stale_size > I40E_MAX_DATA_PER_TXD) { + int align_pad = -(stale->page_offset) & + (I40E_MAX_READ_REQ_SIZE - 1); + + sum -= align_pad; + stale_size -= align_pad; + + do { + sum -= I40E_MAX_DATA_PER_TXD_ALIGNED; + stale_size -= I40E_MAX_DATA_PER_TXD_ALIGNED; + } while (stale_size > I40E_MAX_DATA_PER_TXD); + } + /* if sum is negative we failed to make sufficient progress */ if (sum < 0) return true; @@ -1883,7 +1903,7 @@ bool __i40evf_chk_linearize(struct sk_bu if (!nr_frags--) break;

- sum -= skb_frag_size(stale++); + sum -= stale_size; }

return false;

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Johannes Berg johannes.berg@intel.com

[ Upstream commit 736a80bbfda709fb3631f5f62056f250a38e5804 ]

If there are multiple mesh stations with the same MAC address, they will both get confused and start throwing warnings.

Obviously in this case nothing can actually work anyway, so just drop frames that look like they're from ourselves early on.

Reported-by: Gui Iribarren gui@altermundi.net Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/mac80211/rx.c | 2 ++ 1 file changed, 2 insertions(+)

--- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -3611,6 +3611,8 @@ static bool ieee80211_accept_frame(struc } return true; case NL80211_IFTYPE_MESH_POINT: + if (ether_addr_equal(sdata->vif.addr, hdr->addr2)) + return false; if (multicast) return true; return ether_addr_equal(sdata->vif.addr, hdr->addr1);

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Venkat Duvvuru venkatkumar.duvvuru@broadcom.com

[ Upstream commit 78f300049335ae81a5cc6b4b232481dc5e1f9d41 ]

In bnxt_vf_ndo_prep (which is called by bnxt_get_vf_config ndo), there is a check for "Invalid VF id". Currently, the check is done against max_vfs. However, the user doesn't always create max_vfs. So, the check should be against the created number of VFs. The number of bnxt_vf_info structures that are allocated in bnxt_alloc_vf_resources routine is the "number of requested VFs". So, if an "invalid VF id" falls between the requested number of VFs and the max_vfs, the driver will be dereferencing an invalid pointer.

Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Venkat Devvuru venkatkumar.duvvuru@broadcom.com Signed-off-by: Michael Chan michael.chan@broadcom.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c @@ -68,7 +68,7 @@ static int bnxt_vf_ndo_prep(struct bnxt netdev_err(bp->dev, "vf ndo called though sriov is disabled\n"); return -EINVAL; } - if (vf_id >= bp->pf.max_vfs) { + if (vf_id >= bp->pf.active_vfs) { netdev_err(bp->dev, "Invalid VF id %d\n", vf_id); return -EINVAL; }

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Christophe JAILLET christophe.jaillet@wanadoo.fr

[ Upstream commit 56c0290202ab94a2f2780c449395d4ae8495fab4 ]

If the probing of the regulator is deferred, the memory allocated by 'mdiobus_alloc_size()' will be leaking. It should be freed before the next call to 'sun4i_mdio_probe()' which will reallocate it.

Fixes: 4bdcb1dd9feb ("net: Add MDIO bus driver for the Allwinner EMAC") Signed-off-by: Christophe JAILLET christophe.jaillet@wanadoo.fr Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/phy/mdio-sun4i.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/net/phy/mdio-sun4i.c +++ b/drivers/net/phy/mdio-sun4i.c @@ -118,8 +118,10 @@ static int sun4i_mdio_probe(struct platf

data->regulator = devm_regulator_get(&pdev->dev, "phy"); if (IS_ERR(data->regulator)) { - if (PTR_ERR(data->regulator) == -EPROBE_DEFER) - return -EPROBE_DEFER; + if (PTR_ERR(data->regulator) == -EPROBE_DEFER) { + ret = -EPROBE_DEFER; + goto err_out_free_mdiobus; + }

dev_info(&pdev->dev, "no regulator found\n"); data->regulator = NULL;

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ross Lagerwall ross.lagerwall@citrix.com

[ Upstream commit 951a010233625b77cde3430b4b8785a9a22968d1 ]

If the requested range has a hole, the calculation of the number of pages to unmap is off by one. Fix it.

Signed-off-by: Ross Lagerwall ross.lagerwall@citrix.com Reviewed-by: Boris Ostrovsky boris.ostrovsky@oracle.com Signed-off-by: Boris Ostrovsky boris.ostrovsky@oracle.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/xen/gntdev.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)

--- a/drivers/xen/gntdev.c +++ b/drivers/xen/gntdev.c @@ -378,10 +378,8 @@ static int unmap_grant_pages(struct gran } range = 0; while (range < pages) { - if (map->unmap_ops[offset+range].handle == -1) { - range--; + if (map->unmap_ops[offset+range].handle == -1) break; - } range++; } err = __unmap_grant_pages(map, offset, range);

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Marcelo Ricardo Leitner marcelo.leitner@gmail.com

[ Upstream commit c76f97c99ae6d26d14c7f0e50e074382bfbc9f98 ]

Some sockopt handling functions were calculating the length of the buffer to be written to userspace and then calculating it again when actually writing the buffer, which could lead to some write not using an up-to-date length.

This patch updates such places to just make use of the len variable.

Also, replace some sizeof(type) to sizeof(var).

Signed-off-by: Marcelo Ricardo Leitner marcelo.leitner@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/sctp/socket.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-)

--- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -4765,7 +4765,7 @@ static int sctp_getsockopt_autoclose(str len = sizeof(int); if (put_user(len, optlen)) return -EFAULT; - if (copy_to_user(optval, &sctp_sk(sk)->autoclose, sizeof(int))) + if (copy_to_user(optval, &sctp_sk(sk)->autoclose, len)) return -EFAULT; return 0; } @@ -5342,6 +5342,9 @@ copy_getaddrs: err = -EFAULT; goto out; } + /* XXX: We should have accounted for sizeof(struct sctp_getaddrs) too, + * but we can't change it anymore. + */ if (put_user(bytes_copied, optlen)) err = -EFAULT; out: @@ -5778,7 +5781,7 @@ static int sctp_getsockopt_maxseg(struct params.assoc_id = 0; } else if (len >= sizeof(struct sctp_assoc_value)) { len = sizeof(struct sctp_assoc_value); - if (copy_from_user(&params, optval, sizeof(params))) + if (copy_from_user(&params, optval, len)) return -EFAULT; } else return -EINVAL; @@ -5947,7 +5950,9 @@ static int sctp_getsockopt_active_key(st

if (len < sizeof(struct sctp_authkeyid)) return -EINVAL; - if (copy_from_user(&val, optval, sizeof(struct sctp_authkeyid))) + + len = sizeof(struct sctp_authkeyid); + if (copy_from_user(&val, optval, len)) return -EFAULT;

asoc = sctp_id2assoc(sk, val.scact_assoc_id); @@ -5959,7 +5964,6 @@ static int sctp_getsockopt_active_key(st else val.scact_keynumber = ep->active_key_id;

- len = sizeof(struct sctp_authkeyid); if (put_user(len, optlen)) return -EFAULT; if (copy_to_user(optval, &val, len)) @@ -5985,7 +5989,7 @@ static int sctp_getsockopt_peer_auth_chu if (len < sizeof(struct sctp_authchunks)) return -EINVAL;

- if (copy_from_user(&val, optval, sizeof(struct sctp_authchunks))) + if (copy_from_user(&val, optval, sizeof(val))) return -EFAULT;

to = p->gauth_chunks; @@ -6030,7 +6034,7 @@ static int sctp_getsockopt_local_auth_ch if (len < sizeof(struct sctp_authchunks)) return -EINVAL;

- if (copy_from_user(&val, optval, sizeof(struct sctp_authchunks))) + if (copy_from_user(&val, optval, sizeof(val))) return -EFAULT;

to = p->gauth_chunks;

4.9-stable review patch. If anyone has any objections, please let me know.

------------------

From: Punit Agrawal punit.agrawal@arm.com

Commit 45ee9d5e97a4 ("KVM: arm/arm64: Check pagesize when allocating a hugepage at Stage 2") lost the check for PMD_SIZE during the backport to 4.9.

Fix this by correcting the condition to detect hugepages during stage 2 allocation.

Fixes: 45ee9d5e97a4 ("KVM: arm/arm64: Check pagesize when allocating a hugepage at Stage 2") Reported-by: Ioana Ciornei ioana.ciornei@nxp.com Signed-off-by: Punit Agrawal punit.agrawal@arm.com Cc: Marc Zyngier marc.zyngier@arm.com Cc: Christoffer Dall christoffer.dall@linaro.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/arm/kvm/mmu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm/kvm/mmu.c +++ b/arch/arm/kvm/mmu.c @@ -1284,7 +1284,7 @@ static int user_mem_abort(struct kvm_vcp return -EFAULT; }

- if (vma_kernel_pagesize(vma) && !logging_active) { + if (vma_kernel_pagesize(vma) == PMD_SIZE && !logging_active) { hugetlb = true; gfn = (fault_ipa & PMD_MASK) >> PAGE_SHIFT; } else {