From: Fred Herard fred.herard@oracle.com

[ Upstream commit 5db6dd14b31397e8cccaaddab2ff44ebec1acf25 ]

This commit addresses NULL pointer dereference in iscsi_eh_session_reset. Reference should not be made to session->leadconn when session->state is set to ISCSI_STATE_TERMINATE.

Signed-off-by: Fred Herard fred.herard@oracle.com Reviewed-by: Konrad Rzeszutek Wilk konrad.wilk@oracle.com Reviewed-by: Lee Duncan lduncan@suse.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/libiscsi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index cc8f2a7c2463..c79743de48f9 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -2414,8 +2414,8 @@ int iscsi_eh_session_reset(struct scsi_cmnd *sc) failed: ISCSI_DBG_EH(session, "failing session reset: Could not log back into " - "%s, %s [age %d]\n", session->targetname, - conn->persistent_address, session->age); + "%s [age %d]\n", session->targetname, + session->age); spin_unlock_bh(&session->frwd_lock); mutex_unlock(&session->eh_mutex); return FAILED;

From: YiFei Zhu zhuyifei1999@gmail.com

[ Upstream commit 79c2206d369b87b19ac29cb47601059b6bf5c291 ]

An affected screen resolution is 1366 x 768, which width is not divisible by 8, the default font width. On such screens, when longer lines are earlyprintk'ed, overflow-to-next-line can never trigger, due to the left-most x-coordinate of the next character always less than the screen width. Earlyprintk will infinite loop in trying to print the rest of the string but unable to, due to the line being full.

This patch makes the trigger consider the right-most x-coordinate, instead of left-most, as the value to compare against the screen width threshold.

Signed-off-by: YiFei Zhu zhuyifei1999@gmail.com Signed-off-by: Ard Biesheuvel ard.biesheuvel@linaro.org Cc: Andy Lutomirski luto@kernel.org Cc: Arend van Spriel arend.vanspriel@broadcom.com Cc: Bhupesh Sharma bhsharma@redhat.com Cc: Borislav Petkov bp@alien8.de Cc: Dave Hansen dave.hansen@intel.com Cc: Eric Snowberg eric.snowberg@oracle.com Cc: Hans de Goede hdegoede@redhat.com Cc: Joe Perches joe@perches.com Cc: Jon Hunter jonathanh@nvidia.com Cc: Julien Thierry julien.thierry@arm.com Cc: Linus Torvalds torvalds@linux-foundation.org Cc: Marc Zyngier marc.zyngier@arm.com Cc: Matt Fleming matt@codeblueprint.co.uk Cc: Nathan Chancellor natechancellor@gmail.com Cc: Peter Zijlstra peterz@infradead.org Cc: Sai Praneeth Prakhya sai.praneeth.prakhya@intel.com Cc: Sedat Dilek sedat.dilek@gmail.com Cc: Thomas Gleixner tglx@linutronix.de Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20181129171230.18699-12-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar mingo@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/platform/efi/early_printk.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/platform/efi/early_printk.c b/arch/x86/platform/efi/early_printk.c index 5fdacb322ceb..c3e6be110b7d 100644 --- a/arch/x86/platform/efi/early_printk.c +++ b/arch/x86/platform/efi/early_printk.c @@ -179,7 +179,7 @@ early_efi_write(struct console *con, const char *str, unsigned int num) num--; }

- if (efi_x >= si->lfb_width) { + if (efi_x + font->width > si->lfb_width) { efi_x = 0; efi_y += font->height; }

From: Jose Abreu joabreu@synopsys.com

[ Upstream commit 10d443431dc2bb733cf7add99b453e3fb9047a2e ]

Some ARC CPU's do not support unaligned loads/stores. Currently, generic implementation of reads{b/w/l}()/writes{b/w/l}() is being used with ARC. This can lead to misfunction of some drivers as generic functions do a plain dereference of a pointer that can be unaligned.

Let's use {get/put}_unaligned() helpers instead of plain dereference of pointer in order to fix. The helpers allow to get and store data from an unaligned address whilst preserving the CPU internal alignment. According to [1], the use of these helpers are costly in terms of performance so we added an initial check for a buffer already aligned so that the usage of the helpers can be avoided, when possible.

[1] Documentation/unaligned-memory-access.txt

Cc: Alexey Brodkin abrodkin@synopsys.com Cc: Joao Pinto jpinto@synopsys.com Cc: David Laight David.Laight@ACULAB.COM Tested-by: Vitor Soares soares@synopsys.com Signed-off-by: Jose Abreu joabreu@synopsys.com Signed-off-by: Vineet Gupta vgupta@synopsys.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arc/include/asm/io.h | 72 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 72 insertions(+)

diff --git a/arch/arc/include/asm/io.h b/arch/arc/include/asm/io.h index c22b181e8206..2f39d9b3886e 100644 --- a/arch/arc/include/asm/io.h +++ b/arch/arc/include/asm/io.h @@ -12,6 +12,7 @@ #include <linux/types.h> #include <asm/byteorder.h> #include <asm/page.h> +#include <asm/unaligned.h>

#ifdef CONFIG_ISA_ARCV2 #include <asm/barrier.h> @@ -94,6 +95,42 @@ static inline u32 __raw_readl(const volatile void __iomem *addr) return w; }

+/* + * {read,write}s{b,w,l}() repeatedly access the same IO address in + * native endianness in 8-, 16-, 32-bit chunks {into,from} memory, + * @count times + */ +#define __raw_readsx(t,f) \ +static inline void __raw_reads##f(const volatile void __iomem *addr, \ + void *ptr, unsigned int count) \ +{ \ + bool is_aligned = ((unsigned long)ptr % ((t) / 8)) == 0; \ + u##t *buf = ptr; \ + \ + if (!count) \ + return; \ + \ + /* Some ARC CPU's don't support unaligned accesses */ \ + if (is_aligned) { \ + do { \ + u##t x = __raw_read##f(addr); \ + *buf++ = x; \ + } while (--count); \ + } else { \ + do { \ + u##t x = __raw_read##f(addr); \ + put_unaligned(x, buf++); \ + } while (--count); \ + } \ +} + +#define __raw_readsb __raw_readsb +__raw_readsx(8, b) +#define __raw_readsw __raw_readsw +__raw_readsx(16, w) +#define __raw_readsl __raw_readsl +__raw_readsx(32, l) + #define __raw_writeb __raw_writeb static inline void __raw_writeb(u8 b, volatile void __iomem *addr) { @@ -126,6 +163,35 @@ static inline void __raw_writel(u32 w, volatile void __iomem *addr)

}

+#define __raw_writesx(t,f) \ +static inline void __raw_writes##f(volatile void __iomem *addr, \ + const void *ptr, unsigned int count) \ +{ \ + bool is_aligned = ((unsigned long)ptr % ((t) / 8)) == 0; \ + const u##t *buf = ptr; \ + \ + if (!count) \ + return; \ + \ + /* Some ARC CPU's don't support unaligned accesses */ \ + if (is_aligned) { \ + do { \ + __raw_write##f(*buf++, addr); \ + } while (--count); \ + } else { \ + do { \ + __raw_write##f(get_unaligned(buf++), addr); \ + } while (--count); \ + } \ +} + +#define __raw_writesb __raw_writesb +__raw_writesx(8, b) +#define __raw_writesw __raw_writesw +__raw_writesx(16, w) +#define __raw_writesl __raw_writesl +__raw_writesx(32, l) + /* * MMIO can also get buffered/optimized in micro-arch, so barriers needed * Based on ARM model for the typical use case @@ -141,10 +207,16 @@ static inline void __raw_writel(u32 w, volatile void __iomem *addr) #define readb(c) ({ u8 __v = readb_relaxed(c); __iormb(); __v; }) #define readw(c) ({ u16 __v = readw_relaxed(c); __iormb(); __v; }) #define readl(c) ({ u32 __v = readl_relaxed(c); __iormb(); __v; }) +#define readsb(p,d,l) ({ __raw_readsb(p,d,l); __iormb(); }) +#define readsw(p,d,l) ({ __raw_readsw(p,d,l); __iormb(); }) +#define readsl(p,d,l) ({ __raw_readsl(p,d,l); __iormb(); })

#define writeb(v,c) ({ __iowmb(); writeb_relaxed(v,c); }) #define writew(v,c) ({ __iowmb(); writew_relaxed(v,c); }) #define writel(v,c) ({ __iowmb(); writel_relaxed(v,c); }) +#define writesb(p,d,l) ({ __iowmb(); __raw_writesb(p,d,l); }) +#define writesw(p,d,l) ({ __iowmb(); __raw_writesw(p,d,l); }) +#define writesl(p,d,l) ({ __iowmb(); __raw_writesl(p,d,l); })

/* * Relaxed API for drivers which can handle barrier ordering themselves

From: Dave Kleikamp dave.kleikamp@oracle.com

[ Upstream commit ad3cba223ac02dc769c3bbe88efe277bbb457566 ]

When we use direct_IO with an NFS backing store, we can trigger a WARNING in __set_page_dirty(), as below, since we're dirtying the page unnecessarily in nfs_direct_read_completion().

To fix, replicate the logic in commit 53cbf3b157a0 ("fs: direct-io: don't dirtying pages for ITER_BVEC/ITER_KVEC direct read").

Other filesystems that implement direct_IO handle this; most use blockdev_direct_IO(). ceph and cifs have similar logic.

mount 127.0.0.1:/export /nfs dd if=/dev/zero of=/nfs/image bs=1M count=200 losetup --direct-io=on -f /nfs/image mkfs.btrfs /dev/loop0 mount -t btrfs /dev/loop0 /mnt/

kernel: WARNING: CPU: 0 PID: 8067 at fs/buffer.c:580 __set_page_dirty+0xaf/0xd0 kernel: Modules linked in: loop(E) nfsv3(E) rpcsec_gss_krb5(E) nfsv4(E) dns_resolver(E) nfs(E) fscache(E) nfsd(E) auth_rpcgss(E) nfs_acl(E) lockd(E) grace(E) fuse(E) tun(E) ip6t_rpfilter(E) ipt_REJECT(E) nf_ kernel: snd_seq(E) snd_seq_device(E) snd_pcm(E) video(E) snd_timer(E) snd(E) soundcore(E) ip_tables(E) xfs(E) libcrc32c(E) sd_mod(E) sr_mod(E) cdrom(E) ata_generic(E) pata_acpi(E) crc32c_intel(E) ahci(E) li kernel: CPU: 0 PID: 8067 Comm: kworker/0:2 Tainted: G E 4.20.0-rc1.master.20181111.ol7.x86_64 #1 kernel: Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 kernel: Workqueue: nfsiod rpc_async_release [sunrpc] kernel: RIP: 0010:__set_page_dirty+0xaf/0xd0 kernel: Code: c3 48 8b 02 f6 c4 04 74 d4 48 89 df e8 ba 05 f7 ff 48 89 c6 eb cb 48 8b 43 08 a8 01 75 1f 48 89 d8 48 8b 00 a8 04 74 02 eb 87 <0f> 0b eb 83 48 83 e8 01 eb 9f 48 83 ea 01 0f 1f 00 eb 8b 48 83 e8 kernel: RSP: 0000:ffffc1c8825b7d78 EFLAGS: 00013046 kernel: RAX: 000fffffc0020089 RBX: fffff2b603308b80 RCX: 0000000000000001 kernel: RDX: 0000000000000001 RSI: ffff9d11478115c8 RDI: ffff9d11478115d0 kernel: RBP: ffffc1c8825b7da0 R08: 0000646f6973666e R09: 8080808080808080 kernel: R10: 0000000000000001 R11: 0000000000000000 R12: ffff9d11478115d0 kernel: R13: ffff9d11478115c8 R14: 0000000000003246 R15: 0000000000000001 kernel: FS: 0000000000000000(0000) GS:ffff9d115ba00000(0000) knlGS:0000000000000000 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: CR2: 00007f408686f640 CR3: 0000000104d8e004 CR4: 00000000000606f0 kernel: DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 kernel: DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 kernel: Call Trace: kernel: __set_page_dirty_buffers+0xb6/0x110 kernel: set_page_dirty+0x52/0xb0 kernel: nfs_direct_read_completion+0xc4/0x120 [nfs] kernel: nfs_pgio_release+0x10/0x20 [nfs] kernel: rpc_free_task+0x30/0x70 [sunrpc] kernel: rpc_async_release+0x12/0x20 [sunrpc] kernel: process_one_work+0x174/0x390 kernel: worker_thread+0x4f/0x3e0 kernel: kthread+0x102/0x140 kernel: ? drain_workqueue+0x130/0x130 kernel: ? kthread_stop+0x110/0x110 kernel: ret_from_fork+0x35/0x40 kernel: ---[ end trace 01341980905412c9 ]---

Signed-off-by: Dave Kleikamp dave.kleikamp@oracle.com Signed-off-by: Santosh Shilimkar santosh.shilimkar@oracle.com

[forward-ported to v4.20] Signed-off-by: Calum Mackay calum.mackay@oracle.com Reviewed-by: Dave Kleikamp dave.kleikamp@oracle.com Reviewed-by: Chuck Lever chuck.lever@oracle.com Signed-off-by: Trond Myklebust trond.myklebust@hammerspace.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/nfs/direct.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/fs/nfs/direct.c b/fs/nfs/direct.c index 1ab91124a93e..53f0012ace42 100644 --- a/fs/nfs/direct.c +++ b/fs/nfs/direct.c @@ -98,8 +98,11 @@ struct nfs_direct_req { struct pnfs_ds_commit_info ds_cinfo; /* Storage for cinfo */ struct work_struct work; int flags; + /* for write */ #define NFS_ODIRECT_DO_COMMIT (1) /* an unstable reply was received */ #define NFS_ODIRECT_RESCHED_WRITES (2) /* write verification failed */ + /* for read */ +#define NFS_ODIRECT_SHOULD_DIRTY (3) /* dirty user-space page after read */ struct nfs_writeverf verf; /* unstable write verifier */ };

@@ -422,7 +425,8 @@ static void nfs_direct_read_completion(struct nfs_pgio_header *hdr) struct nfs_page *req = nfs_list_entry(hdr->pages.next); struct page *page = req->wb_page;

- if (!PageCompound(page) && bytes < hdr->good_bytes) + if (!PageCompound(page) && bytes < hdr->good_bytes && + (dreq->flags == NFS_ODIRECT_SHOULD_DIRTY)) set_page_dirty(page); bytes += req->wb_bytes; nfs_list_remove_request(req); @@ -597,6 +601,9 @@ ssize_t nfs_file_direct_read(struct kiocb *iocb, struct iov_iter *iter) if (!is_sync_kiocb(iocb)) dreq->iocb = iocb;

+ if (iter_is_iovec(iter)) + dreq->flags = NFS_ODIRECT_SHOULD_DIRTY; + nfs_start_io_direct(inode);

NFS_I(inode)->read_io += count;

From: Trond Myklebust trond.myklebust@hammerspace.com

[ Upstream commit 0a9a4304f3614e25d9de9b63502ca633c01c0d70 ]

If an asynchronous connection attempt completes while another task is in xprt_connect(), then the call to rpc_sleep_on() could end up racing with the call to xprt_wake_pending_tasks(). So add a second test of the connection state after we've put the task to sleep and set the XPRT_CONNECTING flag, when we know that there can be no asynchronous connection attempts still in progress.

Fixes: 0b9e79431377d ("SUNRPC: Move the test for XPRT_CONNECTING into...") Signed-off-by: Trond Myklebust trond.myklebust@hammerspace.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/sunrpc/xprt.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c index 685e6d225414..1a8df242d26a 100644 --- a/net/sunrpc/xprt.c +++ b/net/sunrpc/xprt.c @@ -778,8 +778,15 @@ void xprt_connect(struct rpc_task *task) return; if (xprt_test_and_set_connecting(xprt)) return; - xprt->stat.connect_start = jiffies; - xprt->ops->connect(xprt, task); + /* Race breaker */ + if (!xprt_connected(xprt)) { + xprt->stat.connect_start = jiffies; + xprt->ops->connect(xprt, task); + } else { + xprt_clear_connecting(xprt); + task->tk_status = 0; + rpc_wake_up_queued_task(&xprt->pending, task); + } } xprt_release_write(xprt, task); }

From: Yangtao Li tiny.windzz@gmail.com

[ Upstream commit 6bd520ab7cf69486ea81fd3cdfd2d5a390ad1100 ]

use of_node_put() to release the refcount.

Signed-off-by: Yangtao Li tiny.windzz@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/sbus/char/envctrl.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/drivers/sbus/char/envctrl.c b/drivers/sbus/char/envctrl.c index 5609b602c54d..baa9b322520b 100644 --- a/drivers/sbus/char/envctrl.c +++ b/drivers/sbus/char/envctrl.c @@ -910,8 +910,10 @@ static void envctrl_init_i2c_child(struct device_node *dp, for (len = 0; len < PCF8584_MAX_CHANNELS; ++len) { pchild->mon_type[len] = ENVCTRL_NOMON; } + of_node_put(root_node); return; } + of_node_put(root_node); }

/* Get the monitor channels. */

From: Yangtao Li tiny.windzz@gmail.com

[ Upstream commit a51921c0db3fd26c4ed83dc0ec5d32988fa02aa5 ]

use of_node_put() to release the refcount.

Signed-off-by: Yangtao Li tiny.windzz@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/ide/pmac.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/ide/pmac.c b/drivers/ide/pmac.c index 0c5d3a99468e..b20025a5a8d9 100644 --- a/drivers/ide/pmac.c +++ b/drivers/ide/pmac.c @@ -920,6 +920,7 @@ static u8 pmac_ide_cable_detect(ide_hwif_t *hwif) struct device_node *root = of_find_node_by_path("/"); const char *model = of_get_property(root, "model", NULL);

+ of_node_put(root); /* Get cable type from device-tree. */ if (cable && !strncmp(cable, "80-", 3)) { /* Some drives fail to detect 80c cable in PowerBook */

From: Dan Carpenter dan.carpenter@oracle.com

[ Upstream commit 2e85c57493e391b93445c1e0d530b36b95becc64 ]

The > comparison should be >= or we write one element beyond the end of the unit->clk_table[] array.

(The unit->clk_table[] array is allocated in the mmp_clk_init() function and it has unit->nr_clks elements).

Fixes: 4661fda10f8b ("clk: mmp: add basic support functions for DT support") Signed-off-by: Dan Carpenter dan.carpenter@oracle.com Signed-off-by: Stephen Boyd sboyd@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/clk/mmp/clk.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/mmp/clk.c b/drivers/clk/mmp/clk.c index 61893fe73251..18b6c9b55b95 100644 --- a/drivers/clk/mmp/clk.c +++ b/drivers/clk/mmp/clk.c @@ -182,7 +182,7 @@ void mmp_clk_add(struct mmp_clk_unit *unit, unsigned int id, pr_err("CLK %d has invalid pointer %p\n", id, clk); return; } - if (id > unit->nr_clks) { + if (id >= unit->nr_clks) { pr_err("CLK %d is invalid\n", id); return; }

From: Juha-Matti Tilli juha-matti.tilli@iki.fi

[ Upstream commit fd6f32f78645db32b6b95a42e45da2ddd6de0e67 ]

These devices support read zero after trim (RZAT), as they advertise to the OS. However, the OS doesn't believe the SSDs unless they are explicitly whitelisted.

Acked-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Juha-Matti Tilli juha-matti.tilli@iki.fi Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/ata/libata-core.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index a166359ad5d4..35be49f5791d 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4476,6 +4476,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "SSD*INTEL*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM, }, { "Samsung*SSD*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM, }, { "SAMSUNG*SSD*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM, }, + { "SAMSUNG*MZ7KM*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM, }, { "ST[1248][0248]0[FH]*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM, },

/*

From: Su Yanjun suyj.fnst@cn.fujitsu.com

[ Upstream commit a5d4a89245ead1f37ed135213653c5beebea4237 ]

When changing mtu many times with traffic, a bug is triggered:

[ 1035.684037] kernel BUG at lib/dynamic_queue_limits.c:26! [ 1035.684042] invalid opcode: 0000 [#1] SMP [ 1035.684049] Modules linked in: loop binfmt_misc 8139cp(OE) macsec tcp_diag udp_diag inet_diag unix_diag af_packet_diag netlink_diag tcp_lp fuse uinput xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 tun bridge stp llc ebtable_filter ebtables ip6table_filter devlink ip6_tables iptable_filter sunrpc snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep ppdev snd_seq iosf_mbi crc32_pclmul parport_pc snd_seq_device ghash_clmulni_intel parport snd_pcm aesni_intel joydev lrw snd_timer virtio_balloon sg gf128mul glue_helper ablk_helper cryptd snd soundcore i2c_piix4 pcspkr ip_tables xfs libcrc32c sr_mod sd_mod cdrom crc_t10dif crct10dif_generic ata_generic [ 1035.684102] pata_acpi virtio_console qxl drm_kms_helper syscopyarea sysfillrect sysimgblt floppy fb_sys_fops crct10dif_pclmul crct10dif_common ttm crc32c_intel serio_raw ata_piix drm libata 8139too virtio_pci drm_panel_orientation_quirks virtio_ring virtio mii dm_mirror dm_region_hash dm_log dm_mod [last unloaded: 8139cp] [ 1035.684132] CPU: 9 PID: 25140 Comm: if-mtu-change Kdump: loaded Tainted: G OE ------------ T 3.10.0-957.el7.x86_64 #1 [ 1035.684134] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [ 1035.684136] task: ffff8f59b1f5a080 ti: ffff8f5a2e32c000 task.ti: ffff8f5a2e32c000 [ 1035.684149] RIP: 0010:[<ffffffffba3a40d0>] [<ffffffffba3a40d0>] dql_completed+0x180/0x190 [ 1035.684162] RSP: 0000:ffff8f5a75483e50 EFLAGS: 00010093 [ 1035.684162] RAX: 00000000000000c2 RBX: ffff8f5a6f91c000 RCX: 0000000000000000 [ 1035.684162] RDX: 0000000000000000 RSI: 0000000000000184 RDI: ffff8f599fea3ec0 [ 1035.684162] RBP: ffff8f5a75483ea8 R08: 00000000000000c2 R09: 0000000000000000 [ 1035.684162] R10: 00000000000616ef R11: ffff8f5a75483b56 R12: ffff8f599fea3e00 [ 1035.684162] R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000184 [ 1035.684162] FS: 00007fa8434de740(0000) GS:ffff8f5a75480000(0000) knlGS:0000000000000000 [ 1035.684162] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1035.684162] CR2: 00000000004305d0 CR3: 000000024eb66000 CR4: 00000000001406e0 [ 1035.684162] Call Trace: [ 1035.684162] <IRQ> [ 1035.684162] [<ffffffffc08cbaf8>] ? cp_interrupt+0x478/0x580 [8139cp] [ 1035.684162] [<ffffffffba14a294>] __handle_irq_event_percpu+0x44/0x1c0 [ 1035.684162] [<ffffffffba14a442>] handle_irq_event_percpu+0x32/0x80 [ 1035.684162] [<ffffffffba14a4cc>] handle_irq_event+0x3c/0x60 [ 1035.684162] [<ffffffffba14db29>] handle_fasteoi_irq+0x59/0x110 [ 1035.684162] [<ffffffffba02e554>] handle_irq+0xe4/0x1a0 [ 1035.684162] [<ffffffffba7795dd>] do_IRQ+0x4d/0xf0 [ 1035.684162] [<ffffffffba76b362>] common_interrupt+0x162/0x162 [ 1035.684162] <EOI> [ 1035.684162] [<ffffffffba0c2ae4>] ? __wake_up_bit+0x24/0x70 [ 1035.684162] [<ffffffffba1e46f5>] ? do_set_pte+0xd5/0x120 [ 1035.684162] [<ffffffffba1b64fb>] unlock_page+0x2b/0x30 [ 1035.684162] [<ffffffffba1e4879>] do_read_fault.isra.61+0x139/0x1b0 [ 1035.684162] [<ffffffffba1e9134>] handle_pte_fault+0x2f4/0xd10 [ 1035.684162] [<ffffffffba1ebc6d>] handle_mm_fault+0x39d/0x9b0 [ 1035.684162] [<ffffffffba76f5e3>] __do_page_fault+0x203/0x500 [ 1035.684162] [<ffffffffba76f9c6>] trace_do_page_fault+0x56/0x150 [ 1035.684162] [<ffffffffba76ef42>] do_async_page_fault+0x22/0xf0 [ 1035.684162] [<ffffffffba76b788>] async_page_fault+0x28/0x30 [ 1035.684162] Code: 54 c7 47 54 ff ff ff ff 44 0f 49 ce 48 8b 35 48 2f 9c 00 48 89 77 58 e9 fe fe ff ff 0f 1f 80 00 00 00 00 41 89 d1 e9 ef fe ff ff <0f> 0b 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 55 8d 42 ff 48 [ 1035.684162] RIP [<ffffffffba3a40d0>] dql_completed+0x180/0x190 [ 1035.684162] RSP <ffff8f5a75483e50>

It's not the same as in 7fe0ee09 patch described. As 8139cp uses shared irq mode, other device irq will trigger cp_interrupt to execute.

cp_change_mtu -> cp_close -> cp_open

In cp_close routine just before free_irq(), some interrupt may occur. In my environment, cp_interrupt exectutes and IntrStatus is 0x4, exactly TxOk. That will cause cp_tx to wake device queue.

As device queue is started, cp_start_xmit and cp_open will run at same time which will cause kernel BUG.

For example: [#] for tx descriptor

At start:

[#][#][#] num_queued=3

After cp_init_hw->cp_start_hw->netdev_reset_queue:

[#][#][#] num_queued=0

When 8139cp starts to work then cp_tx will check num_queued mismatchs the complete_bytes.

The patch will check IntrMask before check IntrStatus in cp_interrupt. When 8139cp interrupt is disabled, just return.

Signed-off-by: Su Yanjun suyj.fnst@cn.fujitsu.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/realtek/8139cp.c | 5 +++++ 1 file changed, 5 insertions(+)

diff --git a/drivers/net/ethernet/realtek/8139cp.c b/drivers/net/ethernet/realtek/8139cp.c index 5297bf77211c..d608c2a6c01f 100644 --- a/drivers/net/ethernet/realtek/8139cp.c +++ b/drivers/net/ethernet/realtek/8139cp.c @@ -578,6 +578,7 @@ static irqreturn_t cp_interrupt (int irq, void *dev_instance) struct cp_private *cp; int handled = 0; u16 status; + u16 mask;

if (unlikely(dev == NULL)) return IRQ_NONE; @@ -585,6 +586,10 @@ static irqreturn_t cp_interrupt (int irq, void *dev_instance)

spin_lock(&cp->lock);

+ mask = cpr16(IntrMask); + if (!mask) + goto out_unlock; + status = cpr16(IntrStatus); if (!status || (status == 0xFFFF)) goto out_unlock;

From: Saeed Mahameed saeedm@mellanox.com

[ Upstream commit 1b603f9e4313348608f256b564ed6e3d9e67f377 ]

MLX4_EN depends on NETDEVICES, ETHERNET and INET Kconfigs. Make sure they are listed in MLX4_EN Kconfig dependencies.

This fixes the following build break:

drivers/net/ethernet/mellanox/mlx4/en_rx.c:582:18: warning: ‘struct iphdr’ declared inside parameter list [enabled by default] struct iphdr *iph) ^ drivers/net/ethernet/mellanox/mlx4/en_rx.c:582:18: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default] drivers/net/ethernet/mellanox/mlx4/en_rx.c: In function ‘get_fixed_ipv4_csum’: drivers/net/ethernet/mellanox/mlx4/en_rx.c:586:20: error: dereferencing pointer to incomplete type _u8 ipproto = iph->protocol;

Signed-off-by: Saeed Mahameed saeedm@mellanox.com Signed-off-by: Tariq Toukan tariqt@mellanox.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/mellanox/mlx4/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlx4/Kconfig b/drivers/net/ethernet/mellanox/mlx4/Kconfig index 5098e7f21987..a0eb4e4bc525 100644 --- a/drivers/net/ethernet/mellanox/mlx4/Kconfig +++ b/drivers/net/ethernet/mellanox/mlx4/Kconfig @@ -5,7 +5,7 @@ config MLX4_EN tristate "Mellanox Technologies 1/10/40Gbit Ethernet support" depends on MAY_USE_DEVLINK - depends on PCI + depends on PCI && NETDEVICES && ETHERNET && INET select MLX4_CORE select PTP_1588_CLOCK ---help---

From: Chris Cole chris@sageembedded.com

[ Upstream commit a1208f6a822ac29933e772ef1f637c5d67838da9 ]

This patch addresses possible memory corruption when v7_dma_inv_range(start_address, end_address) address parameters are not aligned to whole cache lines. This function issues "invalidate" cache management operations to all cache lines from start_address (inclusive) to end_address (exclusive). When start_address and/or end_address are not aligned, the start and/or end cache lines are first issued "clean & invalidate" operation. The assumption is this is done to ensure that any dirty data addresses outside the address range (but part of the first or last cache lines) are cleaned/flushed so that data is not lost, which could happen if just an invalidate is issued.

The problem is that these first/last partial cache lines are issued "clean & invalidate" and then "invalidate". This second "invalidate" is not required and worse can cause "lost" writes to addresses outside the address range but part of the cache line. If another component writes to its part of the cache line between the "clean & invalidate" and "invalidate" operations, the write can get lost. This fix is to remove the extra "invalidate" operation when unaligned addressed are used.

A kernel module is available that has a stress test to reproduce the issue and a unit test of the updated v7_dma_inv_range(). It can be downloaded from http://ftp.sageembedded.com/outgoing/linux/cache-test-20181107.tgz.

v7_dma_inv_range() is call by dmac_[un]map_area(addr, len, direction) when the direction is DMA_FROM_DEVICE. One can (I believe) successfully argue that DMA from a device to main memory should use buffers aligned to cache line size, because the "clean & invalidate" might overwrite data that the device just wrote using DMA. But if a driver does use unaligned buffers, at least this fix will prevent memory corruption outside the buffer.

Signed-off-by: Chris Cole chris@sageembedded.com Signed-off-by: Russell King rmk+kernel@armlinux.org.uk Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/mm/cache-v7.S | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index a134d8a13d00..11d699af30ed 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -359,14 +359,16 @@ v7_dma_inv_range: ALT_UP(W(nop)) #endif mcrne p15, 0, r0, c7, c14, 1 @ clean & invalidate D / U line + addne r0, r0, r2

tst r1, r3 bic r1, r1, r3 mcrne p15, 0, r1, c7, c14, 1 @ clean & invalidate D / U line -1: - mcr p15, 0, r0, c7, c6, 1 @ invalidate D / U line - add r0, r0, r2 cmp r0, r1 +1: + mcrlo p15, 0, r0, c7, c6, 1 @ invalidate D / U line + addlo r0, r0, r2 + cmplo r0, r1 blo 1b dsb st ret lr

From: Nicolas Saenz Julienne nsaenzjulienne@suse.de

[ Upstream commit ecb239d96d369c23c33d41708646df646de669f4 ]

After getting a reference to the platform device's of_node the probe function ends up calling of_find_matching_node() using the node as an argument. The function takes care of decreasing the refcount on it. We are then incorrectly decreasing the refcount on that node again.

This patch removes the unwarranted call to of_node_put().

Fixes: 414fd46e7762 ("fsl/fman: Add FMan support") Signed-off-by: Nicolas Saenz Julienne nsaenzjulienne@suse.de Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/freescale/fman/fman.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fman/fman.c b/drivers/net/ethernet/freescale/fman/fman.c index dafd9e1baba2..380c4a2f6516 100644 --- a/drivers/net/ethernet/freescale/fman/fman.c +++ b/drivers/net/ethernet/freescale/fman/fman.c @@ -2817,7 +2817,7 @@ static struct fman *read_dts_node(struct platform_device *of_dev) if (!muram_node) { dev_err(&of_dev->dev, "%s: could not find MURAM node\n", __func__); - goto fman_node_put; + goto fman_free; }

err = of_address_to_resource(muram_node, 0, @@ -2826,11 +2826,10 @@ static struct fman *read_dts_node(struct platform_device *of_dev) of_node_put(muram_node); dev_err(&of_dev->dev, "%s: of_address_to_resource() = %d\n", __func__, err); - goto fman_node_put; + goto fman_free; }

of_node_put(muram_node); - of_node_put(fm_node);

err = devm_request_irq(&of_dev->dev, irq, fman_irq, 0, "fman", fman); if (err < 0) {

From: Steve French stfrench@microsoft.com

[ Upstream commit 6e785302dad32228819d8066e5376acd15d0e6ba ]

Missing a dependency. Shouldn't show cifs posix extensions in Kconfig if CONFIG_CIFS_ALLOW_INSECURE_DIALECTS (ie SMB1 protocol) is disabled.

Signed-off-by: Steve French stfrench@microsoft.com Reviewed-by: Pavel Shilovsky pshilov@microsoft.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/cifs/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/cifs/Kconfig b/fs/cifs/Kconfig index e7b478b49985..8bef27b8f85d 100644 --- a/fs/cifs/Kconfig +++ b/fs/cifs/Kconfig @@ -111,7 +111,7 @@ config CIFS_XATTR

config CIFS_POSIX bool "CIFS POSIX Extensions" - depends on CIFS_XATTR + depends on CIFS && CIFS_ALLOW_INSECURE_LEGACY && CIFS_XATTR help Enabling this option will cause the cifs client to attempt to negotiate a newer dialect with servers, such as Samba 3.0.5

From: "Adamski, Krzysztof (Nokia - PL/Wroclaw)" krzysztof.adamski@nokia.com

[ Upstream commit 6c7f25cae54b840302e4f1b371dbf318fbf09ab2 ]

According to Intel (R) Axxia TM Lionfish Communication Processor Peripheral Subsystem Hardware Reference Manual, the AXXIA I2C module have a programmable Master Wait Timer, which among others, checks the time between commands send in manual mode. When a timeout (25ms) passes, TSS bit is set in Master Interrupt Status register and a Stop command is issued by the hardware.

The axxia_i2c_xfer(), does not properly handle this situation, however. For each message a separate axxia_i2c_xfer_msg() is called and this function incorrectly assumes that any interrupt might happen only when waiting for completion. This is mostly correct but there is one exception - a master timeout can trigger if enough time has passed between individual transfers. It will, by definition, happen between transfers when the interrupts are disabled by the code. If that happens, the hardware issues Stop command.

The interrupt indicating timeout will not be triggered as soon as we enable them since the Master Interrupt Status is cleared when master mode is entered again (which happens before enabling irqs) meaning this error is lost and the transfer is continued even though the Stop was issued on the bus. The subsequent operations completes without error but a bogus value (0xFF in case of read) is read as the client device is confused because aborted transfer. No error is returned from master_xfer() making caller believe that a valid value was read.

To fix the problem, the TSS bit (indicating timeout) in Master Interrupt Status register is checked before each transfer. If it is set, there was a timeout before this transfer and (as described above) the hardware already issued Stop command so the transaction should be aborted thus -ETIMEOUT is returned from the master_xfer() callback. In order to be sure no timeout was issued we can't just read the status just before starting new transaction as there will always be a small window of time (few CPU cycles at best) where this might still happen. For this reason we have to temporally disable the timer before checking for TSS bit. Disabling it will, however, clear the TSS bit so in order to preserve that information, we have to read it in ISR so we have to ensure that the TSS interrupt is not masked between transfers of one transaction. There is no need to call bus recovery or controller reinitialization if that happens so it's skipped.

Signed-off-by: Krzysztof Adamski krzysztof.adamski@nokia.com Reviewed-by: Alexander Sverdlin alexander.sverdlin@nokia.com Signed-off-by: Wolfram Sang wsa@the-dreams.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/i2c/busses/i2c-axxia.c | 40 ++++++++++++++++++++++++---------- 1 file changed, 29 insertions(+), 11 deletions(-)

diff --git a/drivers/i2c/busses/i2c-axxia.c b/drivers/i2c/busses/i2c-axxia.c index 4351a9343058..96a6d5df9b26 100644 --- a/drivers/i2c/busses/i2c-axxia.c +++ b/drivers/i2c/busses/i2c-axxia.c @@ -74,8 +74,7 @@ MST_STATUS_ND) #define MST_STATUS_ERR (MST_STATUS_NAK | \ MST_STATUS_AL | \ - MST_STATUS_IP | \ - MST_STATUS_TSS) + MST_STATUS_IP) #define MST_TX_BYTES_XFRD 0x50 #define MST_RX_BYTES_XFRD 0x54 #define SCL_HIGH_PERIOD 0x80 @@ -241,7 +240,7 @@ static int axxia_i2c_empty_rx_fifo(struct axxia_i2c_dev *idev) */ if (c <= 0 || c > I2C_SMBUS_BLOCK_MAX) { idev->msg_err = -EPROTO; - i2c_int_disable(idev, ~0); + i2c_int_disable(idev, ~MST_STATUS_TSS); complete(&idev->msg_complete); break; } @@ -299,14 +298,19 @@ static irqreturn_t axxia_i2c_isr(int irq, void *_dev)

if (status & MST_STATUS_SCC) { /* Stop completed */ - i2c_int_disable(idev, ~0); + i2c_int_disable(idev, ~MST_STATUS_TSS); complete(&idev->msg_complete); } else if (status & MST_STATUS_SNS) { /* Transfer done */ - i2c_int_disable(idev, ~0); + i2c_int_disable(idev, ~MST_STATUS_TSS); if (i2c_m_rd(idev->msg) && idev->msg_xfrd < idev->msg->len) axxia_i2c_empty_rx_fifo(idev); complete(&idev->msg_complete); + } else if (status & MST_STATUS_TSS) { + /* Transfer timeout */ + idev->msg_err = -ETIMEDOUT; + i2c_int_disable(idev, ~MST_STATUS_TSS); + complete(&idev->msg_complete); } else if (unlikely(status & MST_STATUS_ERR)) { /* Transfer error */ i2c_int_disable(idev, ~0); @@ -339,10 +343,10 @@ static int axxia_i2c_xfer_msg(struct axxia_i2c_dev *idev, struct i2c_msg *msg) u32 rx_xfer, tx_xfer; u32 addr_1, addr_2; unsigned long time_left; + unsigned int wt_value;

idev->msg = msg; idev->msg_xfrd = 0; - idev->msg_err = 0; reinit_completion(&idev->msg_complete);

if (i2c_m_ten(msg)) { @@ -382,9 +386,18 @@ static int axxia_i2c_xfer_msg(struct axxia_i2c_dev *idev, struct i2c_msg *msg) else if (axxia_i2c_fill_tx_fifo(idev) != 0) int_mask |= MST_STATUS_TFL;

+ wt_value = WT_VALUE(readl(idev->base + WAIT_TIMER_CONTROL)); + /* Disable wait timer temporarly */ + writel(wt_value, idev->base + WAIT_TIMER_CONTROL); + /* Check if timeout error happened */ + if (idev->msg_err) + goto out; + /* Start manual mode */ writel(CMD_MANUAL, idev->base + MST_COMMAND);

+ writel(WT_EN | wt_value, idev->base + WAIT_TIMER_CONTROL); + i2c_int_enable(idev, int_mask);

time_left = wait_for_completion_timeout(&idev->msg_complete, @@ -395,13 +408,15 @@ static int axxia_i2c_xfer_msg(struct axxia_i2c_dev *idev, struct i2c_msg *msg) if (readl(idev->base + MST_COMMAND) & CMD_BUSY) dev_warn(idev->dev, "busy after xfer\n");

- if (time_left == 0) + if (time_left == 0) { idev->msg_err = -ETIMEDOUT; - - if (idev->msg_err == -ETIMEDOUT) i2c_recover_bus(&idev->adapter); + axxia_i2c_init(idev); + }

- if (unlikely(idev->msg_err) && idev->msg_err != -ENXIO) +out: + if (unlikely(idev->msg_err) && idev->msg_err != -ENXIO && + idev->msg_err != -ETIMEDOUT) axxia_i2c_init(idev);

return idev->msg_err; @@ -409,7 +424,7 @@ static int axxia_i2c_xfer_msg(struct axxia_i2c_dev *idev, struct i2c_msg *msg)

static int axxia_i2c_stop(struct axxia_i2c_dev *idev) { - u32 int_mask = MST_STATUS_ERR | MST_STATUS_SCC; + u32 int_mask = MST_STATUS_ERR | MST_STATUS_SCC | MST_STATUS_TSS; unsigned long time_left;

reinit_completion(&idev->msg_complete); @@ -436,6 +451,9 @@ axxia_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) int i; int ret = 0;

+ idev->msg_err = 0; + i2c_int_enable(idev, MST_STATUS_TSS); + for (i = 0; ret == 0 && i < num; ++i) ret = axxia_i2c_xfer_msg(idev, &msgs[i]);

From: Israel Rukshin israelr@mellanox.com

[ Upstream commit d7dcdf9d4e15189ecfda24cc87339a3425448d5c ]

nvmet_rdma_release_rsp() may free the response before using it at error flow.

Fixes: 8407879 ("nvmet-rdma: fix possible bogus dereference under heavy load") Signed-off-by: Israel Rukshin israelr@mellanox.com Reviewed-by: Sagi Grimberg sagi@grimberg.me Reviewed-by: Max Gurtovoy maxg@mellanox.com Signed-off-by: Christoph Hellwig hch@lst.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/target/rdma.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/nvme/target/rdma.c b/drivers/nvme/target/rdma.c index 2dfd877974d7..486393fa4f3e 100644 --- a/drivers/nvme/target/rdma.c +++ b/drivers/nvme/target/rdma.c @@ -524,6 +524,7 @@ static void nvmet_rdma_send_done(struct ib_cq *cq, struct ib_wc *wc) { struct nvmet_rdma_rsp *rsp = container_of(wc->wr_cqe, struct nvmet_rdma_rsp, send_cqe); + struct nvmet_rdma_queue *queue = cq->cq_context;

nvmet_rdma_release_rsp(rsp);

@@ -531,7 +532,7 @@ static void nvmet_rdma_send_done(struct ib_cq *cq, struct ib_wc *wc) wc->status != IB_WC_WR_FLUSH_ERR)) { pr_err("SEND for CQE 0x%p failed with status %s (%d).\n", wc->wr_cqe, ib_wc_status_msg(wc->status), wc->status); - nvmet_rdma_error_comp(rsp->queue); + nvmet_rdma_error_comp(queue); } }