On 12/07/2017 07:43 AM, sean.wang@mediatek.com wrote:

From: Sean Wang sean.wang@mediatek.com

Fix that bananapi-r2 booting from SD-card would fail since incorrect polarity is applied to the previous setup with GPIO_ACTIVE_HIGH.

Cc: stable@vger.kernel.org Fixes: 0eed8d097612 ("arm: dts: mt7623: Add SD-card and EMMC to bananapi-r2") Signed-off-by: Sean Wang sean.wang@mediatek.com Tested-by: Matthias Brugger matthias.bgg@gmail.com

---

arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts index 688a863..7bf5aa2 100644 --- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts +++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts @@ -204,7 +204,7 @@ bus-width = <4>; max-frequency = <50000000>; cap-sd-highspeed;

• cd-gpios = <&pio 261 0>;

• cd-gpios = <&pio 261 GPIO_ACTIVE_LOW>; vmmc-supply = <&mt6323_vmch_reg>; vqmmc-supply = <&mt6323_vio18_reg>;

};

2 and 3 pushed to v4.15-next/dts32

Thanks!