From: suresh kumar suresh2514@gmail.com
[ Upstream commit 4224cfd7fb6523f7a9d1c8bb91bb5df1e38eb624 ]
When bringing down the netdevice or system shutdown, a panic can be triggered while accessing the sysfs path because the device is already removed.
[ 755.549084] mlx5_core 0000:12:00.1: Shutdown was called [ 756.404455] mlx5_core 0000:12:00.0: Shutdown was called ... [ 757.937260] BUG: unable to handle kernel NULL pointer dereference at (null) [ 758.031397] IP: [<ffffffff8ee11acb>] dma_pool_alloc+0x1ab/0x280
crash> bt ... PID: 12649 TASK: ffff8924108f2100 CPU: 1 COMMAND: "amsd" ... #9 [ffff89240e1a38b0] page_fault at ffffffff8f38c778 [exception RIP: dma_pool_alloc+0x1ab] RIP: ffffffff8ee11acb RSP: ffff89240e1a3968 RFLAGS: 00010046 RAX: 0000000000000246 RBX: ffff89243d874100 RCX: 0000000000001000 RDX: 0000000000000000 RSI: 0000000000000246 RDI: ffff89243d874090 RBP: ffff89240e1a39c0 R8: 000000000001f080 R9: ffff8905ffc03c00 R10: ffffffffc04680d4 R11: ffffffff8edde9fd R12: 00000000000080d0 R13: ffff89243d874090 R14: ffff89243d874080 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #10 [ffff89240e1a39c8] mlx5_alloc_cmd_msg at ffffffffc04680f3 [mlx5_core] #11 [ffff89240e1a3a18] cmd_exec at ffffffffc046ad62 [mlx5_core] #12 [ffff89240e1a3ab8] mlx5_cmd_exec at ffffffffc046b4fb [mlx5_core] #13 [ffff89240e1a3ae8] mlx5_core_access_reg at ffffffffc0475434 [mlx5_core] #14 [ffff89240e1a3b40] mlx5e_get_fec_caps at ffffffffc04a7348 [mlx5_core] #15 [ffff89240e1a3bb0] get_fec_supported_advertised at ffffffffc04992bf [mlx5_core] #16 [ffff89240e1a3c08] mlx5e_get_link_ksettings at ffffffffc049ab36 [mlx5_core] #17 [ffff89240e1a3ce8] __ethtool_get_link_ksettings at ffffffff8f25db46 #18 [ffff89240e1a3d48] speed_show at ffffffff8f277208 #19 [ffff89240e1a3dd8] dev_attr_show at ffffffff8f0b70e3 #20 [ffff89240e1a3df8] sysfs_kf_seq_show at ffffffff8eedbedf #21 [ffff89240e1a3e18] kernfs_seq_show at ffffffff8eeda596 #22 [ffff89240e1a3e28] seq_read at ffffffff8ee76d10 #23 [ffff89240e1a3e98] kernfs_fop_read at ffffffff8eedaef5 #24 [ffff89240e1a3ed8] vfs_read at ffffffff8ee4e3ff #25 [ffff89240e1a3f08] sys_read at ffffffff8ee4f27f #26 [ffff89240e1a3f50] system_call_fastpath at ffffffff8f395f92
crash> net_device.state ffff89443b0c0000 state = 0x5 (__LINK_STATE_START| __LINK_STATE_NOCARRIER)
To prevent this scenario, we also make sure that the netdevice is present.
Signed-off-by: suresh kumar suresh2514@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/core/net-sysfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c index 3fb5d8ecc8499..e42df58b88766 100644 --- a/net/core/net-sysfs.c +++ b/net/core/net-sysfs.c @@ -198,7 +198,7 @@ static ssize_t speed_show(struct device *dev, if (!rtnl_trylock()) return restart_syscall();
- if (netif_running(netdev)) { + if (netif_running(netdev) && netif_device_present(netdev)) { struct ethtool_link_ksettings cmd;
if (!__ethtool_get_link_ksettings(netdev, &cmd))
From: Oliver Neukum oneukum@suse.com
[ Upstream commit e9da0b56fe27206b49f39805f7dcda8a89379062 ]
A malicious device can leak heap data to user space providing bogus frame lengths. Introduce a sanity check.
Signed-off-by: Oliver Neukum oneukum@suse.com Reviewed-by: Grant Grundler grundler@chromium.org Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/usb/sr9700.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/usb/sr9700.c b/drivers/net/usb/sr9700.c index aadfe1d1c37ee..f4c4df01874c3 100644 --- a/drivers/net/usb/sr9700.c +++ b/drivers/net/usb/sr9700.c @@ -409,7 +409,7 @@ static int sr9700_rx_fixup(struct usbnet *dev, struct sk_buff *skb) /* ignore the CRC length */ len = (skb->data[1] | (skb->data[2] << 8)) - 4;
- if (len > ETH_FRAME_LEN) + if (len > ETH_FRAME_LEN || len > skb->len) return 0;
/* the last packet of current skb */
From: Shreeya Patel shreeya.patel@collabora.com
[ Upstream commit ae42f9288846353982e2eab181fb41e7fd8bf60f ]
We are racing the registering of .to_irq when probing the i2c driver. This results in random failure of touchscreen devices.
Following explains the race condition better.
[gpio driver] gpio driver registers gpio chip [gpio consumer] gpio is acquired [gpio consumer] gpiod_to_irq() fails with -ENXIO [gpio driver] gpio driver registers irqchip gpiod_to_irq works at this point, but -ENXIO is fatal
We could see the following errors in dmesg logs when gc->to_irq is NULL
[2.101857] i2c_hid i2c-FTS3528:00: HID over i2c has not been provided an Int IRQ [2.101953] i2c_hid: probe of i2c-FTS3528:00 failed with error -22
To avoid this situation, defer probing until to_irq is registered. Returning -EPROBE_DEFER would be the first step towards avoiding the failure of devices due to the race in registration of .to_irq. Final solution to this issue would be to avoid using gc irq members until they are fully initialized.
This issue has been reported many times in past and people have been using workarounds like changing the pinctrl_amd to built-in instead of loading it as a module or by adding a softdep for pinctrl_amd into the config file.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=209413 Reviewed-by: Linus Walleij linus.walleij@linaro.org Reviewed-by: Andy Shevchenko andy.shevchenko@gmail.com Reported-by: kernel test robot lkp@intel.com Signed-off-by: Shreeya Patel shreeya.patel@collabora.com Signed-off-by: Bartosz Golaszewski brgl@bgdev.pl Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpio/gpiolib.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index 73d02f6089d56..a01bf4145beda 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -2726,6 +2726,16 @@ int gpiod_to_irq(const struct gpio_desc *desc)
return retirq; } +#ifdef CONFIG_GPIOLIB_IRQCHIP + if (gc->irq.chip) { + /* + * Avoid race condition with other code, which tries to lookup + * an IRQ before the irqchip has been properly registered, + * i.e. while gpiochip is still being brought up. + */ + return -EPROBE_DEFER; + } +#endif return -ENXIO; } EXPORT_SYMBOL_GPL(gpiod_to_irq);
From: Marek Marczykowski-Górecki marmarek@invisiblethingslab.com
[ Upstream commit e8240addd0a3919e0fd7436416afe9aa6429c484 ]
This reverts commit 2afeec08ab5c86ae21952151f726bfe184f6b23d.
The reasoning in the commit was wrong - the code expected to setup the watch even if 'hotplug-status' didn't exist. In fact, it relied on the watch being fired the first time - to check if maybe 'hotplug-status' is already set to 'connected'. Not registering a watch for non-existing path (which is the case if hotplug script hasn't been executed yet), made the backend not waiting for the hotplug script to execute. This in turns, made the netfront think the interface is fully operational, while in fact it was not (the vif interface on xen-netback side might not be configured yet).
This was a workaround for 'hotplug-status' erroneously being removed. But since that is reverted now, the workaround is not necessary either.
More discussion at https://lore.kernel.org/xen-devel/afedd7cb-a291-e773-8b0d-4db9b291fa98@ipxe....
Signed-off-by: Marek Marczykowski-Górecki marmarek@invisiblethingslab.com Reviewed-by: Paul Durrant paul@xen.org Reviewed-by: Michael Brown mbrown@fensystems.co.uk Link: https://lore.kernel.org/r/20220222001817.2264967-2-marmarek@invisiblethingsl... Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/xen-netback/xenbus.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-)
diff --git a/drivers/net/xen-netback/xenbus.c b/drivers/net/xen-netback/xenbus.c index e6646c8a7bdbb..78788402edd8b 100644 --- a/drivers/net/xen-netback/xenbus.c +++ b/drivers/net/xen-netback/xenbus.c @@ -1040,15 +1040,11 @@ static void connect(struct backend_info *be) xenvif_carrier_on(be->vif);
unregister_hotplug_status_watch(be); - if (xenbus_exists(XBT_NIL, dev->nodename, "hotplug-status")) { - err = xenbus_watch_pathfmt(dev, &be->hotplug_status_watch, - NULL, hotplug_status_changed, - "%s/%s", dev->nodename, - "hotplug-status"); - if (err) - goto err; + err = xenbus_watch_pathfmt(dev, &be->hotplug_status_watch, NULL, + hotplug_status_changed, + "%s/%s", dev->nodename, "hotplug-status"); + if (!err) be->have_hotplug_status_watch = 1; - }
netif_tx_wake_all_queues(be->vif->dev);
From: Sven Schnelle svens@linux.ibm.com
[ Upstream commit 7acf3a127bb7c65ff39099afd78960e77b2ca5de ]
Booting the kernel with 'trace_buf_size=1' give a warning at boot during the ftrace selftests:
[ 0.892809] Running postponed tracer tests: [ 0.892893] Testing tracer function: [ 0.901899] Callback from call_rcu_tasks_trace() invoked. [ 0.983829] Callback from call_rcu_tasks_rude() invoked. [ 1.072003] .. bad ring buffer .. corrupted trace buffer .. [ 1.091944] Callback from call_rcu_tasks() invoked. [ 1.097695] PASSED [ 1.097701] Testing dynamic ftrace: .. filter failed count=0 ..FAILED! [ 1.353474] ------------[ cut here ]------------ [ 1.353478] WARNING: CPU: 0 PID: 1 at kernel/trace/trace.c:1951 run_tracer_selftest+0x13c/0x1b0
Therefore enforce a minimum of 4096 bytes to make the selftest pass.
Link: https://lkml.kernel.org/r/20220214134456.1751749-1-svens@linux.ibm.com
Signed-off-by: Sven Schnelle svens@linux.ibm.com Signed-off-by: Steven Rostedt (Google) rostedt@goodmis.org Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/trace/trace.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 12bee7043be6f..90e0fd5621da9 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -1077,10 +1077,12 @@ static int __init set_buf_size(char *str) if (!str) return 0; buf_size = memparse(str, &str); - /* nr_entries can not be zero */ - if (buf_size == 0) - return 0; - trace_buf_size = buf_size; + /* + * nr_entries can not be zero and the startup + * tests require some buffer space. Therefore + * ensure we have at least 4096 bytes of buffer. + */ + trace_buf_size = max(4096UL, buf_size); return 1; } __setup("trace_buf_size=", set_buf_size);
From: Mike Kravetz mike.kravetz@oracle.com
[ Upstream commit fda153c89af344d21df281009a9d046cf587ea0f ]
Running the memfd script ./run_hugetlbfs_test.sh will often end in error as follows:
memfd-hugetlb: CREATE memfd-hugetlb: BASIC memfd-hugetlb: SEAL-WRITE memfd-hugetlb: SEAL-FUTURE-WRITE memfd-hugetlb: SEAL-SHRINK fallocate(ALLOC) failed: No space left on device ./run_hugetlbfs_test.sh: line 60: 166855 Aborted (core dumped) ./memfd_test hugetlbfs opening: ./mnt/memfd fuse: DONE
If no hugetlb pages have been preallocated, run_hugetlbfs_test.sh will allocate 'just enough' pages to run the test. In the SEAL-FUTURE-WRITE test the mfd_fail_write routine maps the file, but does not unmap. As a result, two hugetlb pages remain reserved for the mapping. When the fallocate call in the SEAL-SHRINK test attempts allocate all hugetlb pages, it is short by the two reserved pages.
Fix by making sure to unmap in mfd_fail_write.
Link: https://lkml.kernel.org/r/20220219004340.56478-1-mike.kravetz@oracle.com Signed-off-by: Mike Kravetz mike.kravetz@oracle.com Cc: Joel Fernandes joel@joelfernandes.org Cc: Shuah Khan shuah@kernel.org Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/memfd/memfd_test.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/tools/testing/selftests/memfd/memfd_test.c b/tools/testing/selftests/memfd/memfd_test.c index 26546892cd545..faab09215c88b 100644 --- a/tools/testing/selftests/memfd/memfd_test.c +++ b/tools/testing/selftests/memfd/memfd_test.c @@ -373,6 +373,7 @@ static void mfd_fail_write(int fd) printf("mmap()+mprotect() didn't fail as expected\n"); abort(); } + munmap(p, mfd_def_size); }
/* verify PUNCH_HOLE fails */
linux-stable-mirror@lists.linaro.org
-
Sasha Levin