Correctly map the regulators used by tlv320aic3106. Both 1.8V and 3.3V for the codec is derived from VBAT via fixed regulators.

Cc: Stable@vger.kernel.org # v4.14+ Signed-off-by: Peter Ujfalusi peter.ujfalusi@ti.com --- Hi,

Changes since v1: - Add stable tag for backporting to v4.14+

Regards, Peter

arch/arm/boot/dts/am335x-evm.dts | 26 ++++++++++++++++++++++---- 1 file changed, 22 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index dce5be5df97b..edcff79879e7 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -57,6 +57,24 @@ enable-active-high; };

+ /* TPS79501 */ + v1_8d_reg: fixedregulator-v1_8d { + compatible = "regulator-fixed"; + regulator-name = "v1_8d"; + vin-supply = <&vbat>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + /* TPS79501 */ + v3_3d_reg: fixedregulator-v3_3d { + compatible = "regulator-fixed"; + regulator-name = "v3_3d"; + vin-supply = <&vbat>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + matrix_keypad: matrix_keypad0 { compatible = "gpio-matrix-keypad"; debounce-delay-ms = <5>; @@ -499,10 +517,10 @@ status = "okay";

/* Regulators */ - AVDD-supply = <&vaux2_reg>; - IOVDD-supply = <&vaux2_reg>; - DRVDD-supply = <&vaux2_reg>; - DVDD-supply = <&vbat>; + AVDD-supply = <&v3_3d_reg>; + IOVDD-supply = <&v3_3d_reg>; + DRVDD-supply = <&v3_3d_reg>; + DVDD-supply = <&v1_8d_reg>; }; };