From: Brian Masney masneyb@onstation.org

[ Upstream commit 2708e876272d89bbbff811d12834adbeef85f022 ]

Silence two warning messages that occur due to -EPROBE_DEFER errors to help cleanup the system boot log.

Signed-off-by: Brian Masney masneyb@onstation.org Reviewed-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Andrzej Hajda a.hajda@samsung.com Link: https://patchwork.freedesktop.org/patch/msgid/20190815004854.19860-4-masneyb... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/bridge/analogix-anx78xx.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/bridge/analogix-anx78xx.c b/drivers/gpu/drm/bridge/analogix-anx78xx.c index f8433c93f4634..cc820e9aea1db 100644 --- a/drivers/gpu/drm/bridge/analogix-anx78xx.c +++ b/drivers/gpu/drm/bridge/analogix-anx78xx.c @@ -725,7 +725,9 @@ static int anx78xx_init_pdata(struct anx78xx *anx78xx) /* 1.0V digital core power regulator */ pdata->dvdd10 = devm_regulator_get(dev, "dvdd10"); if (IS_ERR(pdata->dvdd10)) { - DRM_ERROR("DVDD10 regulator not found\n"); + if (PTR_ERR(pdata->dvdd10) != -EPROBE_DEFER) + DRM_ERROR("DVDD10 regulator not found\n"); + return PTR_ERR(pdata->dvdd10); }

@@ -1341,7 +1343,9 @@ static int anx78xx_i2c_probe(struct i2c_client *client,

err = anx78xx_init_pdata(anx78xx); if (err) { - DRM_ERROR("Failed to initialize pdata: %d\n", err); + if (err != -EPROBE_DEFER) + DRM_ERROR("Failed to initialize pdata: %d\n", err); + return err; }

From: Christian König christian.koenig@amd.com

[ Upstream commit 6817bf283b2b851095825ec7f0e9f10398e09125 ]

Need to make sure that we actually dropping the right fence. Could be done with RCU as well, but to complicated for a fix.

Signed-off-by: Christian König christian.koenig@amd.com Reviewed-by: Chunming Zhou david1.zhou@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c index 49fe5084c53dd..69fb90d9c4855 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c @@ -700,10 +700,8 @@ int amdgpu_vm_flush(struct amdgpu_ring *ring, struct amdgpu_job *job, bool need_ id->oa_base != job->oa_base || id->oa_size != job->oa_size); bool vm_flush_needed = job->vm_needs_flush; - bool pasid_mapping_needed = id->pasid != job->pasid || - !id->pasid_mapping || - !dma_fence_is_signaled(id->pasid_mapping); struct dma_fence *fence = NULL; + bool pasid_mapping_needed; unsigned patch_offset = 0; int r;

@@ -713,6 +711,12 @@ int amdgpu_vm_flush(struct amdgpu_ring *ring, struct amdgpu_job *job, bool need_ pasid_mapping_needed = true; }

+ mutex_lock(&id_mgr->lock); + if (id->pasid != job->pasid || !id->pasid_mapping || + !dma_fence_is_signaled(id->pasid_mapping)) + pasid_mapping_needed = true; + mutex_unlock(&id_mgr->lock); + gds_switch_needed &= !!ring->funcs->emit_gds_switch; vm_flush_needed &= !!ring->funcs->emit_vm_flush && job->vm_pd_addr != AMDGPU_BO_INVALID_OFFSET; @@ -752,9 +756,11 @@ int amdgpu_vm_flush(struct amdgpu_ring *ring, struct amdgpu_job *job, bool need_ }

if (pasid_mapping_needed) { + mutex_lock(&id_mgr->lock); id->pasid = job->pasid; dma_fence_put(id->pasid_mapping); id->pasid_mapping = dma_fence_get(fence); + mutex_unlock(&id_mgr->lock); } dma_fence_put(fence);

From: Lukasz Majewski lukma@denx.de

[ Upstream commit 9f918a728cf86b2757b6a7025e1f46824bfe3155 ]

This change is necessary for spidev devices (e.g. /dev/spidev3.0) working in the slave mode (like NXP's dspi driver for Vybrid SoC).

When SPI HW works in this mode - the master is responsible for providing CS and CLK signals. However, when some fault happens - like for example distortion on SPI lines - the SPI Linux driver needs a chance to recover from this abnormal situation and prepare itself for next (correct) transmission.

This change doesn't pose any threat on drivers working in master mode as spi_slave_abort() function checks if SPI slave mode is supported.

Signed-off-by: Lukasz Majewski lukma@denx.de Link: https://lore.kernel.org/r/20190924110547.14770-2-lukma@denx.de Signed-off-by: Mark Brown broonie@kernel.org Reported-by: kbuild test robot lkp@intel.com Link: https://lore.kernel.org/r/20190925091143.15468-2-lukma@denx.de Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spidev.c | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c index c5fe08bc34a0a..028725573e632 100644 --- a/drivers/spi/spidev.c +++ b/drivers/spi/spidev.c @@ -634,6 +634,9 @@ static int spidev_release(struct inode *inode, struct file *filp) if (dofree) kfree(spidev); } +#ifdef CONFIG_SPI_SLAVE + spi_slave_abort(spidev->spi); +#endif mutex_unlock(&device_list_lock);

return 0;

From: Connor Kuehl connor.kuehl@canonical.com

[ Upstream commit 228241944a48113470d3c3b46c88ba7fbe0a274b ]

Inside a nested 'else' block at the beginning of this function is a call that assigns 'psta' to the return value of 'rtw_get_stainfo()'. If 'rtw_get_stainfo()' returns NULL and the flow of control reaches the 'else if' where 'psta' is dereferenced, then we will dereference a NULL pointer.

Fix this by checking if 'psta' is not NULL before reading its 'psta->qos_option' data member.

Addresses-Coverity: ("Dereference null return value")

Signed-off-by: Connor Kuehl connor.kuehl@canonical.com Acked-by: Larry Finger Larry.Finger@lwfinger.net Link: https://lore.kernel.org/r/20190926150317.5894-1-connor.kuehl@canonical.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/staging/rtl8188eu/core/rtw_xmit.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/rtl8188eu/core/rtw_xmit.c b/drivers/staging/rtl8188eu/core/rtw_xmit.c index dd9b02d316f30..c6a5b62cb3639 100644 --- a/drivers/staging/rtl8188eu/core/rtw_xmit.c +++ b/drivers/staging/rtl8188eu/core/rtw_xmit.c @@ -778,7 +778,7 @@ s32 rtw_make_wlanhdr(struct adapter *padapter, u8 *hdr, struct pkt_attrib *pattr memcpy(pwlanhdr->addr2, get_bssid(pmlmepriv), ETH_ALEN); memcpy(pwlanhdr->addr3, pattrib->src, ETH_ALEN);

- if (psta->qos_option) + if (psta && psta->qos_option) qos_option = true; } else if (check_fwstate(pmlmepriv, WIFI_ADHOC_STATE) || check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE)) { @@ -786,7 +786,7 @@ s32 rtw_make_wlanhdr(struct adapter *padapter, u8 *hdr, struct pkt_attrib *pattr memcpy(pwlanhdr->addr2, pattrib->src, ETH_ALEN); memcpy(pwlanhdr->addr3, get_bssid(pmlmepriv), ETH_ALEN);

- if (psta->qos_option) + if (psta && psta->qos_option) qos_option = true; } else { RT_TRACE(_module_rtl871x_xmit_c_, _drv_err_, ("fw_state:%x is not allowed to xmit frame\n", get_fwstate(pmlmepriv)));

From: Navid Emamdoost navid.emamdoost@gmail.com

[ Upstream commit 3f93616951138a598d930dcaec40f2bfd9ce43bb ]

In rtl_usb_probe if allocation for usb_data fails the allocated hw should be released. In addition the allocated rtlpriv->usb_data should be released on error handling path.

Signed-off-by: Navid Emamdoost navid.emamdoost@gmail.com Signed-off-by: Kalle Valo kvalo@codeaurora.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/realtek/rtlwifi/usb.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/realtek/rtlwifi/usb.c b/drivers/net/wireless/realtek/rtlwifi/usb.c index 5adb939afee88..1181b725f5033 100644 --- a/drivers/net/wireless/realtek/rtlwifi/usb.c +++ b/drivers/net/wireless/realtek/rtlwifi/usb.c @@ -1050,8 +1050,10 @@ int rtl_usb_probe(struct usb_interface *intf, rtlpriv->hw = hw; rtlpriv->usb_data = kcalloc(RTL_USB_MAX_RX_COUNT, sizeof(u32), GFP_KERNEL); - if (!rtlpriv->usb_data) + if (!rtlpriv->usb_data) { + ieee80211_free_hw(hw); return -ENOMEM; + }

/* this spin lock must be initialized early */ spin_lock_init(&rtlpriv->locks.usb_lock); @@ -1112,6 +1114,7 @@ int rtl_usb_probe(struct usb_interface *intf, _rtl_usb_io_handler_release(hw); usb_put_dev(udev); complete(&rtlpriv->firmware_loading_complete); + kfree(rtlpriv->usb_data); return -ENODEV; } EXPORT_SYMBOL(rtl_usb_probe);

From: Anilkumar Kolli akolli@codeaurora.org

[ Upstream commit d98ddae85a4a57124f87960047b1b6419312147f ]

In a multiradio board with one QCA9984 and one AR9987 after enabling the crashdump with module parameter coredump_mask=7, below backtrace is seen.

vmalloc: allocation failure: 0 bytes kworker/u4:0: page allocation failure: order:0, mode:0x80d2 CPU: 0 PID: 6 Comm: kworker/u4:0 Not tainted 3.14.77 #130 Workqueue: ath10k_wq ath10k_core_register_work [ath10k_core] (unwind_backtrace) from [<c021abf8>] (show_stack+0x10/0x14) (dump_stack+0x80/0xa0) (warn_alloc_failed+0xd0/0xfc) (__vmalloc_node_range+0x1b4/0x1d8) (__vmalloc_node+0x34/0x40) (vzalloc+0x24/0x30) (ath10k_coredump_register+0x6c/0x88 [ath10k_core]) (ath10k_core_register_work+0x350/0xb34 [ath10k_core]) (process_one_work+0x20c/0x32c) (worker_thread+0x228/0x360)

This is due to ath10k_hw_mem_layout is not defined for AR9987. For coredump undefined hw ramdump_size is 0. Check for the ramdump_size before allocation memory.

Tested on: AR9987, QCA9984 FW version: 10.4-3.9.0.2-00044

Signed-off-by: Anilkumar Kolli akolli@codeaurora.org Signed-off-by: Kalle Valo kvalo@codeaurora.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/ath/ath10k/coredump.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/coredump.c b/drivers/net/wireless/ath/ath10k/coredump.c index 4d28063052fec..385b84f24322d 100644 --- a/drivers/net/wireless/ath/ath10k/coredump.c +++ b/drivers/net/wireless/ath/ath10k/coredump.c @@ -1105,9 +1105,11 @@ static struct ath10k_dump_file_data *ath10k_coredump_build(struct ath10k *ar) dump_tlv = (struct ath10k_tlv_dump_data *)(buf + sofar); dump_tlv->type = cpu_to_le32(ATH10K_FW_CRASH_DUMP_RAM_DATA); dump_tlv->tlv_len = cpu_to_le32(crash_data->ramdump_buf_len); - memcpy(dump_tlv->tlv_data, crash_data->ramdump_buf, - crash_data->ramdump_buf_len); - sofar += sizeof(*dump_tlv) + crash_data->ramdump_buf_len; + if (crash_data->ramdump_buf_len) { + memcpy(dump_tlv->tlv_data, crash_data->ramdump_buf, + crash_data->ramdump_buf_len); + sofar += sizeof(*dump_tlv) + crash_data->ramdump_buf_len; + } }

spin_unlock_bh(&ar->data_lock); @@ -1154,6 +1156,9 @@ int ath10k_coredump_register(struct ath10k *ar) if (test_bit(ATH10K_FW_CRASH_DUMP_RAM_DATA, &ath10k_coredump_mask)) { crash_data->ramdump_buf_len = ath10k_coredump_get_ramdump_size(ar);

+ if (!crash_data->ramdump_buf_len) + return 0; + crash_data->ramdump_buf = vzalloc(crash_data->ramdump_buf_len); if (!crash_data->ramdump_buf) return -ENOMEM;

From: Benoit Parrot bparrot@ti.com

[ Upstream commit 13aa21cfe92ce9ebb51824029d89f19c33f81419 ]

VIDIOC_S_STD should not return an error if the value is identical to the current one. This error was highlighted by the v4l2-compliance test.

Signed-off-by: Benoit Parrot bparrot@ti.com Acked-by: Lad Prabhakar prabhakar.csengg@gmail.com Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Mauro Carvalho Chehab mchehab+samsung@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/platform/am437x/am437x-vpfe.c | 4 ++++ 1 file changed, 4 insertions(+)

diff --git a/drivers/media/platform/am437x/am437x-vpfe.c b/drivers/media/platform/am437x/am437x-vpfe.c index b05738a95e55e..809320decdeb2 100644 --- a/drivers/media/platform/am437x/am437x-vpfe.c +++ b/drivers/media/platform/am437x/am437x-vpfe.c @@ -1848,6 +1848,10 @@ static int vpfe_s_std(struct file *file, void *priv, v4l2_std_id std_id) if (!(sdinfo->inputs[0].capabilities & V4L2_IN_CAP_STD)) return -ENODATA;

+ /* if trying to set the same std then nothing to do */ + if (vpfe_standards[vpfe->std_index].std_id == std_id) + return 0; + /* If streaming is started, return error */ if (vb2_is_busy(&vpfe->buffer_queue)) { vpfe_err(vpfe, "%s device busy\n", __func__);

From: Janusz Krzysztofik jmkrzyszt@gmail.com

[ Upstream commit 7b188d6ba27a131e7934a51a14ece331c0491f18 ]

Commit 4f996594ceaf ("[media] v4l2: make vidioc_s_crop const") introduced a writable copy of constified user requested crop rectangle in order to be able to perform hardware alignments on it. Later on, commit 10d5509c8d50 ("[media] v4l2: remove g/s_crop from video ops") replaced s_crop() video operation using that const argument with set_selection() pad operation which had a corresponding argument not constified, however the original behavior of the driver was not restored. Since that time, any hardware alignment applied on a user requested crop rectangle is not passed back to the user calling .set_selection() as it should be.

Fix the issue by dropping the copy and replacing all references to it with references to the crop rectangle embedded in the user argument.

Fixes: 10d5509c8d50 ("[media] v4l2: remove g/s_crop from video ops") Signed-off-by: Janusz Krzysztofik jmkrzyszt@gmail.com Signed-off-by: Sakari Ailus sakari.ailus@linux.intel.com Signed-off-by: Mauro Carvalho Chehab mchehab+samsung@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/i2c/ov6650.c | 31 +++++++++++++++---------------- 1 file changed, 15 insertions(+), 16 deletions(-)

diff --git a/drivers/media/i2c/ov6650.c b/drivers/media/i2c/ov6650.c index edded869d7920..e3433a4fc4738 100644 --- a/drivers/media/i2c/ov6650.c +++ b/drivers/media/i2c/ov6650.c @@ -469,38 +469,37 @@ static int ov6650_set_selection(struct v4l2_subdev *sd, { struct i2c_client *client = v4l2_get_subdevdata(sd); struct ov6650 *priv = to_ov6650(client); - struct v4l2_rect rect = sel->r; int ret;

if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE || sel->target != V4L2_SEL_TGT_CROP) return -EINVAL;

- v4l_bound_align_image(&rect.width, 2, W_CIF, 1, - &rect.height, 2, H_CIF, 1, 0); - v4l_bound_align_image(&rect.left, DEF_HSTRT << 1, - (DEF_HSTRT << 1) + W_CIF - (__s32)rect.width, 1, - &rect.top, DEF_VSTRT << 1, - (DEF_VSTRT << 1) + H_CIF - (__s32)rect.height, 1, - 0); + v4l_bound_align_image(&sel->r.width, 2, W_CIF, 1, + &sel->r.height, 2, H_CIF, 1, 0); + v4l_bound_align_image(&sel->r.left, DEF_HSTRT << 1, + (DEF_HSTRT << 1) + W_CIF - (__s32)sel->r.width, 1, + &sel->r.top, DEF_VSTRT << 1, + (DEF_VSTRT << 1) + H_CIF - (__s32)sel->r.height, + 1, 0);

- ret = ov6650_reg_write(client, REG_HSTRT, rect.left >> 1); + ret = ov6650_reg_write(client, REG_HSTRT, sel->r.left >> 1); if (!ret) { - priv->rect.left = rect.left; + priv->rect.left = sel->r.left; ret = ov6650_reg_write(client, REG_HSTOP, - (rect.left + rect.width) >> 1); + (sel->r.left + sel->r.width) >> 1); } if (!ret) { - priv->rect.width = rect.width; - ret = ov6650_reg_write(client, REG_VSTRT, rect.top >> 1); + priv->rect.width = sel->r.width; + ret = ov6650_reg_write(client, REG_VSTRT, sel->r.top >> 1); } if (!ret) { - priv->rect.top = rect.top; + priv->rect.top = sel->r.top; ret = ov6650_reg_write(client, REG_VSTOP, - (rect.top + rect.height) >> 1); + (sel->r.top + sel->r.height) >> 1); } if (!ret) - priv->rect.height = rect.height; + priv->rect.height = sel->r.height;

return ret; }

From: Janusz Krzysztofik jmkrzyszt@gmail.com

[ Upstream commit 3143b459de4cdcce67b36827476c966e93c1cf01 ]

The driver stores frame format settings supposed to be in line with hardware state in a device private structure. Since the driver initial submission, those settings are updated before they are actually applied on hardware. If an error occurs on device update, the stored settings my not reflect hardware state anymore and consecutive calls to .get_fmt() may return incorrect information. That in turn may affect ability of a bridge device to use correct DMA transfer settings if such incorrect informmation on active frame format returned by .get_fmt() is used.

Assuming a failed device update means its state hasn't changed, update frame format related settings stored in the device private structure only after they are successfully applied so the stored values always reflect hardware state as closely as possible.

Fixes: 2f6e2404799a ("[media] SoC Camera: add driver for OV6650 sensor") Signed-off-by: Janusz Krzysztofik jmkrzyszt@gmail.com Signed-off-by: Sakari Ailus sakari.ailus@linux.intel.com Signed-off-by: Mauro Carvalho Chehab mchehab+samsung@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/i2c/ov6650.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/media/i2c/ov6650.c b/drivers/media/i2c/ov6650.c index e3433a4fc4738..60109442a0729 100644 --- a/drivers/media/i2c/ov6650.c +++ b/drivers/media/i2c/ov6650.c @@ -613,7 +613,6 @@ static int ov6650_s_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *mf) dev_err(&client->dev, "Pixel format not handled: 0x%x\n", code); return -EINVAL; } - priv->code = code;

if (code == MEDIA_BUS_FMT_Y8_1X8 || code == MEDIA_BUS_FMT_SBGGR8_1X8) { @@ -639,7 +638,6 @@ static int ov6650_s_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *mf) dev_dbg(&client->dev, "max resolution: CIF\n"); coma_mask |= COMA_QCIF; } - priv->half_scale = half_scale;

clkrc = CLKRC_12MHz; mclk = 12000000; @@ -657,8 +655,13 @@ static int ov6650_s_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *mf) ret = ov6650_reg_rmw(client, REG_COMA, coma_set, coma_mask); if (!ret) ret = ov6650_reg_write(client, REG_CLKRC, clkrc); - if (!ret) + if (!ret) { + priv->half_scale = half_scale; + ret = ov6650_reg_rmw(client, REG_COML, coml_set, coml_mask); + } + if (!ret) + priv->code = code;

if (!ret) { mf->colorspace = priv->colorspace;

From: Nathan Chancellor natechancellor@gmail.com

[ Upstream commit 7e5705c635ecfccde559ebbbe1eaf05b5cc60529 ]

When building cpupower with clang, the following warning appears:

utils/idle_monitor/hsw_ext_idle.c:42:16: warning: initializer overrides prior initialization of this subobject [-Winitializer-overrides] .desc = N_("Processor Package C2"), ^~~~~~~~~~~~~~~~~~~~~~ ./utils/helpers/helpers.h:25:33: note: expanded from macro 'N_' #define N_(String) gettext_noop(String) ^~~~~~ ./utils/helpers/helpers.h:23:30: note: expanded from macro 'gettext_noop' #define gettext_noop(String) String ^~~~~~ utils/idle_monitor/hsw_ext_idle.c:41:16: note: previous initialization is here .desc = N_("Processor Package C9"), ^~~~~~~~~~~~~~~~~~~~~~ ./utils/helpers/helpers.h:25:33: note: expanded from macro 'N_' #define N_(String) gettext_noop(String) ^~~~~~ ./utils/helpers/helpers.h:23:30: note: expanded from macro 'gettext_noop' #define gettext_noop(String) String ^~~~~~ 1 warning generated.

This appears to be a copy and paste or merge mistake because the name and id fields both have PC9 in them, not PC2. Remove the second assignment to fix the warning.

Fixes: 7ee767b69b68 ("cpupower: Add Haswell family 0x45 specific idle monitor to show PC8,9,10 states") Link: https://github.com/ClangBuiltLinux/linux/issues/718 Signed-off-by: Nathan Chancellor natechancellor@gmail.com Signed-off-by: Shuah Khan skhan@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- tools/power/cpupower/utils/idle_monitor/hsw_ext_idle.c | 1 - 1 file changed, 1 deletion(-)

diff --git a/tools/power/cpupower/utils/idle_monitor/hsw_ext_idle.c b/tools/power/cpupower/utils/idle_monitor/hsw_ext_idle.c index f794d6bbb7e9f..3e4ff4a1cdf4b 100644 --- a/tools/power/cpupower/utils/idle_monitor/hsw_ext_idle.c +++ b/tools/power/cpupower/utils/idle_monitor/hsw_ext_idle.c @@ -40,7 +40,6 @@ static cstate_t hsw_ext_cstates[HSW_EXT_CSTATE_COUNT] = { { .name = "PC9", .desc = N_("Processor Package C9"), - .desc = N_("Processor Package C2"), .id = PC9, .range = RANGE_PACKAGE, .get_count_percent = hsw_ext_get_count_percent,

From: Ben Greear greearb@candelatech.com

[ Upstream commit cc6df017e55764ffef9819dd9554053182535ffd ]

Offchannel management frames were failing:

[18099.253732] ath10k_pci 0000:01:00.0: timed out waiting for offchannel skb cf0e3780 [18102.293686] ath10k_pci 0000:01:00.0: timed out waiting for offchannel skb cf0e3780 [18105.333653] ath10k_pci 0000:01:00.0: timed out waiting for offchannel skb cf0e3780 [18108.373712] ath10k_pci 0000:01:00.0: timed out waiting for offchannel skb cf0e3780 [18111.413687] ath10k_pci 0000:01:00.0: timed out waiting for offchannel skb cf0e36c0 [18114.453726] ath10k_pci 0000:01:00.0: timed out waiting for offchannel skb cf0e3f00 [18117.493773] ath10k_pci 0000:01:00.0: timed out waiting for offchannel skb cf0e36c0 [18120.533631] ath10k_pci 0000:01:00.0: timed out waiting for offchannel skb cf0e3f00

This bug appears to have been added between 4.0 (which works for us), and 4.4, which does not work.

I think this is because the tx-offchannel logic gets in a loop when ath10k_mac_tx_frm_has_freq(ar) is false, so pkt is never actually sent to the firmware for transmit.

This patch fixes the problem on 4.9 for me, and now HS20 clients can work again with my firmware.

Antonio: tested with 10.4-3.5.3-00057 on QCA4019 and QCA9888

Signed-off-by: Ben Greear greearb@candelatech.com Tested-by: Antonio Quartulli antonio.quartulli@kaiwoo.ai [kvalo@codeaurora.org: improve commit log, remove unneeded parenthesis] Signed-off-by: Kalle Valo kvalo@codeaurora.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/ath/ath10k/mac.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index 613ca74f1b286..174e0ce31c42b 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -3651,7 +3651,7 @@ static int ath10k_mac_tx(struct ath10k *ar, struct ieee80211_vif *vif, enum ath10k_hw_txrx_mode txmode, enum ath10k_mac_tx_path txpath, - struct sk_buff *skb) + struct sk_buff *skb, bool noque_offchan) { struct ieee80211_hw *hw = ar->hw; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); @@ -3679,10 +3679,10 @@ static int ath10k_mac_tx(struct ath10k *ar, } }

- if (info->flags & IEEE80211_TX_CTL_TX_OFFCHAN) { + if (!noque_offchan && info->flags & IEEE80211_TX_CTL_TX_OFFCHAN) { if (!ath10k_mac_tx_frm_has_freq(ar)) { - ath10k_dbg(ar, ATH10K_DBG_MAC, "queued offchannel skb %pK\n", - skb); + ath10k_dbg(ar, ATH10K_DBG_MAC, "mac queued offchannel skb %pK len %d\n", + skb, skb->len);

skb_queue_tail(&ar->offchan_tx_queue, skb); ieee80211_queue_work(hw, &ar->offchan_tx_work); @@ -3744,8 +3744,8 @@ void ath10k_offchan_tx_work(struct work_struct *work)

mutex_lock(&ar->conf_mutex);

- ath10k_dbg(ar, ATH10K_DBG_MAC, "mac offchannel skb %pK\n", - skb); + ath10k_dbg(ar, ATH10K_DBG_MAC, "mac offchannel skb %pK len %d\n", + skb, skb->len);

hdr = (struct ieee80211_hdr *)skb->data; peer_addr = ieee80211_get_DA(hdr); @@ -3791,7 +3791,7 @@ void ath10k_offchan_tx_work(struct work_struct *work) txmode = ath10k_mac_tx_h_get_txmode(ar, vif, sta, skb); txpath = ath10k_mac_tx_h_get_txpath(ar, skb, txmode);

- ret = ath10k_mac_tx(ar, vif, txmode, txpath, skb); + ret = ath10k_mac_tx(ar, vif, txmode, txpath, skb, true); if (ret) { ath10k_warn(ar, "failed to transmit offchannel frame: %d\n", ret); @@ -3801,8 +3801,8 @@ void ath10k_offchan_tx_work(struct work_struct *work) time_left = wait_for_completion_timeout(&ar->offchan_tx_completed, 3 * HZ); if (time_left == 0) - ath10k_warn(ar, "timed out waiting for offchannel skb %pK\n", - skb); + ath10k_warn(ar, "timed out waiting for offchannel skb %pK, len: %d\n", + skb, skb->len);

if (!peer && tmp_peer_created) { ret = ath10k_peer_delete(ar, vdev_id, peer_addr); @@ -3998,7 +3998,7 @@ int ath10k_mac_tx_push_txq(struct ieee80211_hw *hw, spin_unlock_bh(&ar->htt.tx_lock); }

- ret = ath10k_mac_tx(ar, vif, txmode, txpath, skb); + ret = ath10k_mac_tx(ar, vif, txmode, txpath, skb, false); if (unlikely(ret)) { ath10k_warn(ar, "failed to push frame: %d\n", ret);

@@ -4280,7 +4280,7 @@ static void ath10k_mac_op_tx(struct ieee80211_hw *hw, spin_unlock_bh(&ar->htt.tx_lock); }

- ret = ath10k_mac_tx(ar, vif, txmode, txpath, skb); + ret = ath10k_mac_tx(ar, vif, txmode, txpath, skb, false); if (ret) { ath10k_warn(ar, "failed to transmit frame: %d\n", ret); if (is_htt) {

From: Allen Pais allen.pais@oracle.com

[ Upstream commit 81de29d842ccb776c0f77aa3e2b11b07fff0c0e2 ]

alloc_workqueue is not checked for errors and as a result, a potential NULL dereference could occur.

v2 (Felix Kuehling): * Fix compile error (kfifo_free instead of fifo_free) * Return proper error code

Signed-off-by: Allen Pais allen.pais@oracle.com Reviewed-by: Felix Kuehling Felix.Kuehling@amd.com Signed-off-by: Felix Kuehling Felix.Kuehling@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/amdkfd/kfd_interrupt.c | 5 +++++ 1 file changed, 5 insertions(+)

diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_interrupt.c b/drivers/gpu/drm/amd/amdkfd/kfd_interrupt.c index c56ac47cd3189..bc47f6a444564 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_interrupt.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_interrupt.c @@ -62,6 +62,11 @@ int kfd_interrupt_init(struct kfd_dev *kfd) }

kfd->ih_wq = alloc_workqueue("KFD IH", WQ_HIGHPRI, 1); + if (unlikely(!kfd->ih_wq)) { + kfifo_free(&kfd->ih_fifo); + dev_err(kfd_chardev(), "Failed to allocate KFD IH workqueue\n"); + return -ENOMEM; + } spin_lock_init(&kfd->interrupt_lock);

INIT_WORK(&kfd->interrupt_work, interrupt_wq);

From: Stanimir Varbanov stanimir.varbanov@linaro.org

[ Upstream commit 8dbebb2bd01e6f36e9a215dcde99ace70408f2c8 ]

Failure to suspend (venus_suspend_3xx) happens when the system is fresh booted and loading venus driver. This happens once and after reload the venus driver modules the problem disrepair.

Fix the failure by skipping the check for WFI and IDLE bits if PC_READY is on in control status register.

Signed-off-by: Stanimir Varbanov stanimir.varbanov@linaro.org Signed-off-by: Mauro Carvalho Chehab mchehab+samsung@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/platform/qcom/venus/hfi_venus.c | 6 ++++++ 1 file changed, 6 insertions(+)

diff --git a/drivers/media/platform/qcom/venus/hfi_venus.c b/drivers/media/platform/qcom/venus/hfi_venus.c index 124085556b94b..fbcc67c10993f 100644 --- a/drivers/media/platform/qcom/venus/hfi_venus.c +++ b/drivers/media/platform/qcom/venus/hfi_venus.c @@ -1484,6 +1484,7 @@ static int venus_suspend_3xx(struct venus_core *core) { struct venus_hfi_device *hdev = to_hfi_priv(core); struct device *dev = core->dev; + u32 ctrl_status; bool val; int ret;

@@ -1499,6 +1500,10 @@ static int venus_suspend_3xx(struct venus_core *core) return -EINVAL; }

+ ctrl_status = venus_readl(hdev, CPU_CS_SCIACMDARG0); + if (ctrl_status & CPU_CS_SCIACMDARG0_PC_READY) + goto power_off; + /* * Power collapse sequence for Venus 3xx and 4xx versions: * 1. Check for ARM9 and video core to be idle by checking WFI bit @@ -1523,6 +1528,7 @@ static int venus_suspend_3xx(struct venus_core *core) if (ret) return ret;

+power_off: mutex_lock(&hdev->lock);

ret = venus_power_off(hdev);

From: Tony Lindgren tony@atomide.com

[ Upstream commit eaecce12f5f0d2c35d278e41e1bc4522393861ab ]

When unloading omap3-rom-rng, we'll get the following:

WARNING: CPU: 0 PID: 100 at drivers/clk/clk.c:948 clk_core_disable

This is because the clock may be already disabled by omap3_rom_rng_idle(). Let's fix the issue by checking for rng_idle on exit.

Cc: Aaro Koskinen aaro.koskinen@iki.fi Cc: Adam Ford aford173@gmail.com Cc: Pali Rohár pali.rohar@gmail.com Cc: Sebastian Reichel sre@kernel.org Cc: Tero Kristo t-kristo@ti.com Fixes: 1c6b7c2108bd ("hwrng: OMAP3 ROM Random Number Generator support") Signed-off-by: Tony Lindgren tony@atomide.com Signed-off-by: Herbert Xu herbert@gondor.apana.org.au Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/char/hw_random/omap3-rom-rng.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/char/hw_random/omap3-rom-rng.c b/drivers/char/hw_random/omap3-rom-rng.c index 38b719017186e..648e39ce6bd95 100644 --- a/drivers/char/hw_random/omap3-rom-rng.c +++ b/drivers/char/hw_random/omap3-rom-rng.c @@ -121,7 +121,8 @@ static int omap3_rom_rng_remove(struct platform_device *pdev) { cancel_delayed_work_sync(&idle_work); hwrng_unregister(&omap3_rom_rng_ops); - clk_disable_unprepare(rng_clk); + if (!rng_idle) + clk_disable_unprepare(rng_clk); return 0; }

From: Yang Yingliang yangyingliang@huawei.com

[ Upstream commit 649cd16c438f51d4cd777e71ca1f47f6e0c5e65d ]

If usb_set_interface() failed, iface->cur_altsetting will not be assigned and it will be used in flexcop_usb_transfer_init() It may lead a NULL pointer dereference.

Check usb_set_interface() return value in flexcop_usb_init() and return failed to avoid using this NULL pointer.

Signed-off-by: Yang Yingliang yangyingliang@huawei.com Signed-off-by: Sean Young sean@mess.org Signed-off-by: Mauro Carvalho Chehab mchehab+samsung@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/usb/b2c2/flexcop-usb.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/media/usb/b2c2/flexcop-usb.c b/drivers/media/usb/b2c2/flexcop-usb.c index ac4fddfd0a43f..f1807c16438dd 100644 --- a/drivers/media/usb/b2c2/flexcop-usb.c +++ b/drivers/media/usb/b2c2/flexcop-usb.c @@ -503,7 +503,13 @@ static int flexcop_usb_transfer_init(struct flexcop_usb *fc_usb) static int flexcop_usb_init(struct flexcop_usb *fc_usb) { /* use the alternate setting with the larges buffer */ - usb_set_interface(fc_usb->udev,0,1); + int ret = usb_set_interface(fc_usb->udev, 0, 1); + + if (ret) { + err("set interface failed."); + return ret; + } + switch (fc_usb->udev->speed) { case USB_SPEED_LOW: err("cannot handle USB speed because it is too slow.");

From: Matthias Kaehlcke mka@chromium.org

[ Upstream commit bee447e224b2645911c5d06e35dc90d8433fcef6 ]

The DDC/CI protocol involves sending a multi-byte request to the display via I2C, which is typically followed by a multi-byte response. The internal I2C controller only allows single byte reads/writes or reads of 8 sequential bytes, hence DDC/CI is not supported when the internal I2C controller is used. The I2C transfers complete without errors, however the data in the response is garbage. Abort transfers to/from slave address 0x37 (DDC) with -EOPNOTSUPP, to make it evident that the communication is failing.

Signed-off-by: Matthias Kaehlcke mka@chromium.org Reviewed-by: Douglas Anderson dianders@chromium.org Reviewed-by: Sean Paul sean@poorly.run Acked-by: Neil Armstrong narmstrong@baylibre.com Signed-off-by: Neil Armstrong narmstrong@baylibre.com Link: https://patchwork.freedesktop.org/patch/msgid/20191002124354.v2.1.I709dfec49... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 10 ++++++++++ 1 file changed, 10 insertions(+)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c index 5971976284bf9..fb396d550275c 100644 --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c @@ -39,6 +39,7 @@

#include <media/cec-notifier.h>

+#define DDC_CI_ADDR 0x37 #define DDC_SEGMENT_ADDR 0x30

#define HDMI_EDID_LEN 512 @@ -320,6 +321,15 @@ static int dw_hdmi_i2c_xfer(struct i2c_adapter *adap, u8 addr = msgs[0].addr; int i, ret = 0;

+ if (addr == DDC_CI_ADDR) + /* + * The internal I2C controller does not support the multi-byte + * read and write operations needed for DDC/CI. + * TOFIX: Blacklist the DDC/CI address until we filter out + * unsupported I2C operations. + */ + return -EOPNOTSUPP; + dev_dbg(hdmi->dev, "xfer: num: %d, addr: %#x\n", num, addr);

for (i = 0; i < num; i++) {

From: Bart Van Assche bvanassche@acm.org

[ Upstream commit 1d200e9d6f635ae894993a7d0f1b9e0b6e522e3b ]

Fix the following compiler warnings:

In file included from ./include/linux/bitmap.h:9, from ./include/linux/cpumask.h:12, from ./arch/x86/include/asm/cpumask.h:5, from ./arch/x86/include/asm/msr.h:11, from ./arch/x86/include/asm/processor.h:21, from ./arch/x86/include/asm/cpufeature.h:5, from ./arch/x86/include/asm/thread_info.h:53, from ./include/linux/thread_info.h:38, from ./arch/x86/include/asm/preempt.h:7, from ./include/linux/preempt.h:78, from ./include/linux/spinlock.h:51, from ./include/linux/mmzone.h:8, from ./include/linux/gfp.h:6, from ./include/linux/mm.h:10, from ./include/linux/bvec.h:13, from ./include/linux/blk_types.h:10, from block/blk-wbt.c:23: In function 'strncpy', inlined from 'perf_trace_wbt_stat' at ./include/trace/events/wbt.h:15:1: ./include/linux/string.h:260:9: warning: '__builtin_strncpy' specified bound 32 equals destination size [-Wstringop-truncation] return __builtin_strncpy(p, q, size); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In function 'strncpy', inlined from 'perf_trace_wbt_lat' at ./include/trace/events/wbt.h:58:1: ./include/linux/string.h:260:9: warning: '__builtin_strncpy' specified bound 32 equals destination size [-Wstringop-truncation] return __builtin_strncpy(p, q, size); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In function 'strncpy', inlined from 'perf_trace_wbt_step' at ./include/trace/events/wbt.h:87:1: ./include/linux/string.h:260:9: warning: '__builtin_strncpy' specified bound 32 equals destination size [-Wstringop-truncation] return __builtin_strncpy(p, q, size); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In function 'strncpy', inlined from 'perf_trace_wbt_timer' at ./include/trace/events/wbt.h:126:1: ./include/linux/string.h:260:9: warning: '__builtin_strncpy' specified bound 32 equals destination size [-Wstringop-truncation] return __builtin_strncpy(p, q, size); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In function 'strncpy', inlined from 'trace_event_raw_event_wbt_stat' at ./include/trace/events/wbt.h:15:1: ./include/linux/string.h:260:9: warning: '__builtin_strncpy' specified bound 32 equals destination size [-Wstringop-truncation] return __builtin_strncpy(p, q, size); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In function 'strncpy', inlined from 'trace_event_raw_event_wbt_lat' at ./include/trace/events/wbt.h:58:1: ./include/linux/string.h:260:9: warning: '__builtin_strncpy' specified bound 32 equals destination size [-Wstringop-truncation] return __builtin_strncpy(p, q, size); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In function 'strncpy', inlined from 'trace_event_raw_event_wbt_timer' at ./include/trace/events/wbt.h:126:1: ./include/linux/string.h:260:9: warning: '__builtin_strncpy' specified bound 32 equals destination size [-Wstringop-truncation] return __builtin_strncpy(p, q, size); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In function 'strncpy', inlined from 'trace_event_raw_event_wbt_step' at ./include/trace/events/wbt.h:87:1: ./include/linux/string.h:260:9: warning: '__builtin_strncpy' specified bound 32 equals destination size [-Wstringop-truncation] return __builtin_strncpy(p, q, size); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Cc: Christoph Hellwig hch@infradead.org Cc: Ming Lei ming.lei@redhat.com Cc: Hannes Reinecke hare@suse.com Cc: Johannes Thumshirn jthumshirn@suse.de Fixes: e34cbd307477 ("blk-wbt: add general throttling mechanism"; v4.10). Signed-off-by: Bart Van Assche bvanassche@acm.org Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- include/trace/events/wbt.h | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/include/trace/events/wbt.h b/include/trace/events/wbt.h index b048694070e2c..37342a13c9cb9 100644 --- a/include/trace/events/wbt.h +++ b/include/trace/events/wbt.h @@ -33,7 +33,8 @@ TRACE_EVENT(wbt_stat, ),

TP_fast_assign( - strncpy(__entry->name, dev_name(bdi->dev), 32); + strlcpy(__entry->name, dev_name(bdi->dev), + ARRAY_SIZE(__entry->name)); __entry->rmean = stat[0].mean; __entry->rmin = stat[0].min; __entry->rmax = stat[0].max; @@ -67,7 +68,8 @@ TRACE_EVENT(wbt_lat, ),

TP_fast_assign( - strncpy(__entry->name, dev_name(bdi->dev), 32); + strlcpy(__entry->name, dev_name(bdi->dev), + ARRAY_SIZE(__entry->name)); __entry->lat = div_u64(lat, 1000); ),

@@ -103,7 +105,8 @@ TRACE_EVENT(wbt_step, ),

TP_fast_assign( - strncpy(__entry->name, dev_name(bdi->dev), 32); + strlcpy(__entry->name, dev_name(bdi->dev), + ARRAY_SIZE(__entry->name)); __entry->msg = msg; __entry->step = step; __entry->window = div_u64(window, 1000); @@ -138,7 +141,8 @@ TRACE_EVENT(wbt_timer, ),

TP_fast_assign( - strncpy(__entry->name, dev_name(bdi->dev), 32); + strlcpy(__entry->name, dev_name(bdi->dev), + ARRAY_SIZE(__entry->name)); __entry->status = status; __entry->step = step; __entry->inflight = inflight;

From: Alexandru Ardelean alexandru.ardelean@analog.com

[ Upstream commit 3cfd6464fe23deb45bb688df66184b3f32fefc16 ]

The iio_triggered_buffer_predisable() should be called last, to detach the poll func after the devices has been suspended.

This change re-organizes things a bit so that the postenable & predisable are symmetrical. It also converts the preenable() to a postenable().

Not stable material as there is no known problem with the current code, it's just not consistent with the form we would like all the IIO drivers to adopt so as to allow subsystem wide changes.

Signed-off-by: Alexandru Ardelean alexandru.ardelean@analog.com Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/iio/proximity/sx9500.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/drivers/iio/proximity/sx9500.c b/drivers/iio/proximity/sx9500.c index ff80409e0c446..0f5c387c19819 100644 --- a/drivers/iio/proximity/sx9500.c +++ b/drivers/iio/proximity/sx9500.c @@ -678,11 +678,15 @@ static irqreturn_t sx9500_trigger_handler(int irq, void *private) return IRQ_HANDLED; }

-static int sx9500_buffer_preenable(struct iio_dev *indio_dev) +static int sx9500_buffer_postenable(struct iio_dev *indio_dev) { struct sx9500_data *data = iio_priv(indio_dev); int ret = 0, i;

+ ret = iio_triggered_buffer_postenable(indio_dev); + if (ret) + return ret; + mutex_lock(&data->mutex);

for (i = 0; i < SX9500_NUM_CHANNELS; i++) @@ -699,6 +703,9 @@ static int sx9500_buffer_preenable(struct iio_dev *indio_dev)

mutex_unlock(&data->mutex);

+ if (ret) + iio_triggered_buffer_predisable(indio_dev); + return ret; }

@@ -707,8 +714,6 @@ static int sx9500_buffer_predisable(struct iio_dev *indio_dev) struct sx9500_data *data = iio_priv(indio_dev); int ret = 0, i;

- iio_triggered_buffer_predisable(indio_dev); - mutex_lock(&data->mutex);

for (i = 0; i < SX9500_NUM_CHANNELS; i++) @@ -725,12 +730,13 @@ static int sx9500_buffer_predisable(struct iio_dev *indio_dev)

mutex_unlock(&data->mutex);

+ iio_triggered_buffer_predisable(indio_dev); + return ret; }

static const struct iio_buffer_setup_ops sx9500_buffer_setup_ops = { - .preenable = sx9500_buffer_preenable, - .postenable = iio_triggered_buffer_postenable, + .postenable = sx9500_buffer_postenable, .predisable = sx9500_buffer_predisable, };

From: Rodrigo Siqueira rodrigosiqueiramelo@gmail.com

[ Upstream commit aed6105b28b10613f16c0bfe97525fe5a23338df ]

For historical reasons, the function drm_wait_vblank_ioctl always return -EINVAL if something gets wrong. This scenario limits the flexibility for the userspace to make detailed verification of any problem and take some action. In particular, the validation of “if (!dev->irq_enabled)” in the drm_wait_vblank_ioctl is responsible for checking if the driver support vblank or not. If the driver does not support VBlank, the function drm_wait_vblank_ioctl returns EINVAL, which does not represent the real issue; this patch changes this behavior by return EOPNOTSUPP. Additionally, drm_crtc_get_sequence_ioctl and drm_crtc_queue_sequence_ioctl, also returns EINVAL if vblank is not supported; this patch also changes the return value to EOPNOTSUPP in these functions. Lastly, these functions are invoked by libdrm, which is used by many compositors; because of this, it is important to check if this change breaks any compositor. In this sense, the following projects were examined:

* Drm-hwcomposer * Kwin * Sway * Wlroots * Wayland * Weston * Mutter * Xorg (67 different drivers)

For each repository the verification happened in three steps:

* Update the main branch * Look for any occurrence of "drmCrtcQueueSequence", "drmCrtcGetSequence", and "drmWaitVBlank" with the command git grep -n "STRING". * Look in the git history of the project with the command git log -S<STRING>

None of the above projects validate the use of EINVAL when using drmWaitVBlank(), which make safe, at least for these projects, to change the return values. On the other hand, mesa and xserver project uses drmCrtcQueueSequence() and drmCrtcGetSequence(); this change is harmless for both projects.

Change since V5 (Pekka Paalanen): - Check if the change also affects Mutter

Change since V4 (Daniel): - Also return EOPNOTSUPP in drm_crtc_[get|queue]_sequence_ioctl

Change since V3: - Return EINVAL for _DRM_VBLANK_SIGNAL (Daniel)

Change since V2: Daniel Vetter and Chris Wilson - Replace ENOTTY by EOPNOTSUPP - Return EINVAL if the parameters are wrong

Cc: Keith Packard keithp@keithp.com Cc: Maarten Lankhorst maarten.lankhorst@linux.intel.com Cc: Ville Syrjälä ville.syrjala@linux.intel.com Cc: Chris Wilson chris@chris-wilson.co.uk Cc: Daniel Vetter daniel@ffwll.ch Cc: Pekka Paalanen pekka.paalanen@collabora.com Signed-off-by: Rodrigo Siqueira rodrigosiqueiramelo@gmail.com Reviewed-by: Daniel Vetter daniel@ffwll.ch Acked-by: Pekka Paalanen pekka.paalanen@collabora.com Link: https://patchwork.freedesktop.org/patch/msgid/20191002140516.adeyj3htylimmlm... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/drm_vblank.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/drm_vblank.c b/drivers/gpu/drm/drm_vblank.c index d1859bcc7ccbc..33a72a84361ef 100644 --- a/drivers/gpu/drm/drm_vblank.c +++ b/drivers/gpu/drm/drm_vblank.c @@ -1572,7 +1572,7 @@ int drm_wait_vblank_ioctl(struct drm_device *dev, void *data, unsigned int flags, pipe, high_pipe;

if (!dev->irq_enabled) - return -EINVAL; + return -EOPNOTSUPP;

if (vblwait->request.type & _DRM_VBLANK_SIGNAL) return -EINVAL; @@ -1813,7 +1813,7 @@ int drm_crtc_get_sequence_ioctl(struct drm_device *dev, void *data, return -EINVAL;

if (!dev->irq_enabled) - return -EINVAL; + return -EOPNOTSUPP;

crtc = drm_crtc_find(dev, file_priv, get_seq->crtc_id); if (!crtc) @@ -1871,7 +1871,7 @@ int drm_crtc_queue_sequence_ioctl(struct drm_device *dev, void *data, return -EINVAL;

if (!dev->irq_enabled) - return -EINVAL; + return -EOPNOTSUPP;

crtc = drm_crtc_find(dev, file_priv, queue_seq->crtc_id); if (!crtc)

From: Benoit Parrot bparrot@ti.com

[ Upstream commit 102af9b9922f658f705a4b0deaccabac409131bf ]

commit 3dc2046ca78b ("[media] media: ti-vpe: vpe: allow use of user specified stride") and commit da4414eaed15 ("[media] media: ti-vpe: vpdma: add support for user specified stride") resulted in the Motion Vector stride to be the same as the image stride.

This caused memory corruption in the output image as mentioned in commit 00db969964c8 ("[media] media: ti-vpe: vpe: Fix line stride for output motion vector").

Fixes: 3dc2046ca78b ("[media] media: ti-vpe: vpe: allow use of user specified stride") Fixes: da4414eaed15 ("[media] media: ti-vpe: vpdma: add support for user specified stride") Signed-off-by: Benoit Parrot bparrot@ti.com Acked-by: Nikhil Devshatwar nikhil.nd@ti.com Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Mauro Carvalho Chehab mchehab+samsung@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/platform/ti-vpe/vpe.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-)

diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c index d70871d0ad2d9..69c0e14cccb17 100644 --- a/drivers/media/platform/ti-vpe/vpe.c +++ b/drivers/media/platform/ti-vpe/vpe.c @@ -1027,11 +1027,14 @@ static void add_out_dtd(struct vpe_ctx *ctx, int port) dma_addr_t dma_addr; u32 flags = 0; u32 offset = 0; + u32 stride;

if (port == VPE_PORT_MV_OUT) { vpdma_fmt = &vpdma_misc_fmts[VPDMA_DATA_FMT_MV]; dma_addr = ctx->mv_buf_dma[mv_buf_selector]; q_data = &ctx->q_data[Q_DATA_SRC]; + stride = ALIGN((q_data->width * vpdma_fmt->depth) >> 3, + VPDMA_STRIDE_ALIGN); } else { /* to incorporate interleaved formats */ int plane = fmt->coplanar ? p_data->vb_part : 0; @@ -1058,6 +1061,7 @@ static void add_out_dtd(struct vpe_ctx *ctx, int port) } /* Apply the offset */ dma_addr += offset; + stride = q_data->bytesperline[VPE_LUMA]; }

if (q_data->flags & Q_DATA_FRAME_1D) @@ -1069,7 +1073,7 @@ static void add_out_dtd(struct vpe_ctx *ctx, int port) MAX_W, MAX_H);

vpdma_add_out_dtd(&ctx->desc_list, q_data->width, - q_data->bytesperline[VPE_LUMA], &q_data->c_rect, + stride, &q_data->c_rect, vpdma_fmt, dma_addr, MAX_OUT_WIDTH_REG1, MAX_OUT_HEIGHT_REG1, p_data->channel, flags); } @@ -1088,10 +1092,13 @@ static void add_in_dtd(struct vpe_ctx *ctx, int port) dma_addr_t dma_addr; u32 flags = 0; u32 offset = 0; + u32 stride;

if (port == VPE_PORT_MV_IN) { vpdma_fmt = &vpdma_misc_fmts[VPDMA_DATA_FMT_MV]; dma_addr = ctx->mv_buf_dma[mv_buf_selector]; + stride = ALIGN((q_data->width * vpdma_fmt->depth) >> 3, + VPDMA_STRIDE_ALIGN); } else { /* to incorporate interleaved formats */ int plane = fmt->coplanar ? p_data->vb_part : 0; @@ -1118,6 +1125,7 @@ static void add_in_dtd(struct vpe_ctx *ctx, int port) } /* Apply the offset */ dma_addr += offset; + stride = q_data->bytesperline[VPE_LUMA];

if (q_data->flags & Q_DATA_INTERLACED_SEQ_TB) { /* @@ -1153,10 +1161,10 @@ static void add_in_dtd(struct vpe_ctx *ctx, int port) if (p_data->vb_part && fmt->fourcc == V4L2_PIX_FMT_NV12) frame_height /= 2;

- vpdma_add_in_dtd(&ctx->desc_list, q_data->width, - q_data->bytesperline[VPE_LUMA], &q_data->c_rect, - vpdma_fmt, dma_addr, p_data->channel, field, flags, frame_width, - frame_height, 0, 0); + vpdma_add_in_dtd(&ctx->desc_list, q_data->width, stride, + &q_data->c_rect, vpdma_fmt, dma_addr, + p_data->channel, field, flags, frame_width, + frame_height, 0, 0); }

/*

From: Benoit Parrot bparrot@ti.com

[ Upstream commit 2444846c0dbfa4ead21b621e4300ec32c90fbf38 ]

v4l2-compliance fails with this message:

fail: v4l2-test-buffers.cpp(294): \ (int)g_sequence() < seq.last_seq + 1 fail: v4l2-test-buffers.cpp(740): \ buf.check(m2m_q, last_m2m_seq) fail: v4l2-test-buffers.cpp(974): \ captureBufs(node, q, m2m_q, frame_count, true) test MMAP: FAIL

The driver is failing to update the source frame sequence number in the vb2 buffer object. Only the destination frame sequence was being updated.

This is only a reporting issue if the user space app actually cares about the frame sequence number. But it is fixed nonetheless.

Signed-off-by: Benoit Parrot bparrot@ti.com Reviewed-by: Tomi Valkeinen tomi.valkeinen@ti.com Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Mauro Carvalho Chehab mchehab+samsung@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/platform/ti-vpe/vpe.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c index 76d699e94b001..15f0b0bb89c0e 100644 --- a/drivers/media/platform/ti-vpe/vpe.c +++ b/drivers/media/platform/ti-vpe/vpe.c @@ -1431,6 +1431,7 @@ static irqreturn_t vpe_irq(int irq_vpe, void *data) d_vb->timecode = s_vb->timecode;

d_vb->sequence = ctx->sequence; + s_vb->sequence = ctx->sequence;

d_q_data = &ctx->q_data[Q_DATA_DST]; if (d_q_data->flags & Q_IS_INTERLACED) {

From: Benoit Parrot bparrot@ti.com

[ Upstream commit a37980ac5be29b83da67bf7d571c6bd9f90f8e45 ]

v4l2-compliance fails with this message:

warn: v4l2-test-formats.cpp(717): \ TRY_FMT cannot handle an invalid pixelformat. test VIDIOC_TRY_FMT: FAIL

This causes the following kernel panic:

Unable to handle kernel paging request at virtual address 56595561 pgd = ecd80e00 *pgd=00000000 Internal error: Oops: 205 [#1] PREEMPT SMP ARM ... CPU: 0 PID: 930 Comm: v4l2-compliance Not tainted \ 4.14.62-01715-gc8cd67f49a19 #1 Hardware name: Generic DRA72X (Flattened Device Tree) task: ece44d80 task.stack: ecc6e000 PC is at __vpe_try_fmt+0x18c/0x2a8 [ti_vpe] LR is at 0x8

Because the driver fails to properly check the 'num_planes' values for proper ranges it ends up accessing out of bound data causing the kernel panic.

Since this driver only handle single or dual plane pixel format, make sure the provided value does not exceed 2 planes.

Signed-off-by: Benoit Parrot bparrot@ti.com Reviewed-by: Tomi Valkeinen tomi.valkeinen@ti.com Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Mauro Carvalho Chehab mchehab+samsung@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/platform/ti-vpe/vpe.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c index ca9095b803097..54f0d9d3cc491 100644 --- a/drivers/media/platform/ti-vpe/vpe.c +++ b/drivers/media/platform/ti-vpe/vpe.c @@ -1646,7 +1646,7 @@ static int __vpe_try_fmt(struct vpe_ctx *ctx, struct v4l2_format *f, &pix->height, MIN_H, MAX_H, H_ALIGN, S_ALIGN);

- if (!pix->num_planes) + if (!pix->num_planes || pix->num_planes > 2) pix->num_planes = fmt->coplanar ? 2 : 1; else if (pix->num_planes > 1 && !fmt->coplanar) pix->num_planes = 1;

From: Benoit Parrot bparrot@ti.com

[ Upstream commit 0bac73adea4df8d34048b38f6ff24dc3e73e90b6 ]

v4l2-compliance fails with this message:

fail: v4l2-test-formats.cpp(463): !pfmt.sizeimage fail: v4l2-test-formats.cpp(736): \ Video Capture Multiplanar is valid, \ but TRY_FMT failed to return a format test VIDIOC_TRY_FMT: FAIL

This failure is causd by the driver failing to handle out range 'bytesperline' values from user space applications.

VPDMA hardware is limited to 64k line stride (16 bytes aligned, so 65520 bytes). So make sure the provided or calculated 'bytesperline' is smaller than the maximum value.

Signed-off-by: Benoit Parrot bparrot@ti.com Reviewed-by: Tomi Valkeinen tomi.valkeinen@ti.com Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Mauro Carvalho Chehab mchehab+samsung@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/platform/ti-vpe/vpdma.h | 1 + drivers/media/platform/ti-vpe/vpe.c | 4 ++++ 2 files changed, 5 insertions(+)

diff --git a/drivers/media/platform/ti-vpe/vpdma.h b/drivers/media/platform/ti-vpe/vpdma.h index 7e611501c2916..f29074c849155 100644 --- a/drivers/media/platform/ti-vpe/vpdma.h +++ b/drivers/media/platform/ti-vpe/vpdma.h @@ -60,6 +60,7 @@ struct vpdma_data_format { * line stride of source and dest * buffers should be 16 byte aligned */ +#define VPDMA_MAX_STRIDE 65520 /* Max line stride 16 byte aligned */ #define VPDMA_DTD_DESC_SIZE 32 /* 8 words */ #define VPDMA_CFD_CTD_DESC_SIZE 16 /* 4 words */

diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c index 52d5aebe0fb81..a285b9db7ee86 100644 --- a/drivers/media/platform/ti-vpe/vpe.c +++ b/drivers/media/platform/ti-vpe/vpe.c @@ -1685,6 +1685,10 @@ static int __vpe_try_fmt(struct vpe_ctx *ctx, struct v4l2_format *f, if (stride > plane_fmt->bytesperline) plane_fmt->bytesperline = stride;

+ plane_fmt->bytesperline = clamp_t(u32, plane_fmt->bytesperline, + stride, + VPDMA_MAX_STRIDE); + plane_fmt->bytesperline = ALIGN(plane_fmt->bytesperline, VPDMA_STRIDE_ALIGN);

From: David Galiffi david.galiffi@amd.com

[ Upstream commit dd998291dbe92106d8c4a7581c409b356928d711 ]

[WHY]

During detection: function: get_active_converter_info populates link->dpcd_caps.dongle_caps only when dpcd_rev >= DPCD_REV_11 and DWN_STRM_PORTX_TYPE is DOWN_STREAM_DETAILED_HDMI or DOWN_STREAM_DETAILED_DP_PLUS_PLUS. Otherwise, it is not cleared, and stale information remains.

During mode validation: function: dp_active_dongle_validate_timing reads link->dpcd_caps.dongle_caps->dongle_type to determine the maximum pixel clock to support. This information is now stale and no longer valid.

[HOW] dp_active_dongle_validate_timing should be using link->dpcd_caps->dongle_type instead.

Signed-off-by: David Galiffi david.galiffi@amd.com Reviewed-by: Jun Lei Jun.Lei@amd.com Acked-by: Bhawanpreet Lakha Bhawanpreet.Lakha@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/display/dc/core/dc_link.c | 2 +- drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 1 + 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c index 23a7ef97afdd2..c6f7c1344a9b8 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c @@ -1950,7 +1950,7 @@ static bool dp_active_dongle_validate_timing( break; }

- if (dongle_caps->dongle_type != DISPLAY_DONGLE_DP_HDMI_CONVERTER || + if (dpcd_caps->dongle_type != DISPLAY_DONGLE_DP_HDMI_CONVERTER || dongle_caps->extendedCapValid == false) return true;

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c index 05840f5bddd59..122249da03ab7 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c @@ -2172,6 +2172,7 @@ static void get_active_converter_info( uint8_t data, struct dc_link *link) { union dp_downstream_port_present ds_port = { .byte = data }; + memset(&link->dpcd_caps.dongle_caps, 0, sizeof(link->dpcd_caps.dongle_caps));

/* decode converter info*/ if (!ds_port.fields.PORT_PRESENT) {

From: Sami Tolvanen samitolvanen@google.com

[ Upstream commit 00198a6eaf66609de5e4de9163bb42c7ca9dd7b7 ]

Use COMPAT_SYSCALL_DEFINE0 to define (rt_)sigreturn() syscalls to replace sys32_sigreturn() and sys32_rt_sigreturn(). This fixes indirect call mismatches with Control-Flow Integrity (CFI) checking.

Signed-off-by: Sami Tolvanen samitolvanen@google.com Acked-by: Andy Lutomirski luto@kernel.org Cc: Borislav Petkov bp@alien8.de Cc: H . Peter Anvin hpa@zytor.com Cc: Kees Cook keescook@chromium.org Cc: Linus Torvalds torvalds@linux-foundation.org Cc: Peter Zijlstra peterz@infradead.org Cc: Thomas Gleixner tglx@linutronix.de Link: https://lkml.kernel.org/r/20191008224049.115427-4-samitolvanen@google.com Signed-off-by: Ingo Molnar mingo@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/entry/syscalls/syscall_32.tbl | 4 ++-- arch/x86/ia32/ia32_signal.c | 5 +++-- 2 files changed, 5 insertions(+), 4 deletions(-)

diff --git a/arch/x86/entry/syscalls/syscall_32.tbl b/arch/x86/entry/syscalls/syscall_32.tbl index 3cf7b533b3d13..273e99c0b9110 100644 --- a/arch/x86/entry/syscalls/syscall_32.tbl +++ b/arch/x86/entry/syscalls/syscall_32.tbl @@ -130,7 +130,7 @@ 116 i386 sysinfo sys_sysinfo __ia32_compat_sys_sysinfo 117 i386 ipc sys_ipc __ia32_compat_sys_ipc 118 i386 fsync sys_fsync __ia32_sys_fsync -119 i386 sigreturn sys_sigreturn sys32_sigreturn +119 i386 sigreturn sys_sigreturn __ia32_compat_sys_sigreturn 120 i386 clone sys_clone __ia32_compat_sys_x86_clone 121 i386 setdomainname sys_setdomainname __ia32_sys_setdomainname 122 i386 uname sys_newuname __ia32_sys_newuname @@ -184,7 +184,7 @@ 170 i386 setresgid sys_setresgid16 __ia32_sys_setresgid16 171 i386 getresgid sys_getresgid16 __ia32_sys_getresgid16 172 i386 prctl sys_prctl __ia32_sys_prctl -173 i386 rt_sigreturn sys_rt_sigreturn sys32_rt_sigreturn +173 i386 rt_sigreturn sys_rt_sigreturn __ia32_compat_sys_rt_sigreturn 174 i386 rt_sigaction sys_rt_sigaction __ia32_compat_sys_rt_sigaction 175 i386 rt_sigprocmask sys_rt_sigprocmask __ia32_sys_rt_sigprocmask 176 i386 rt_sigpending sys_rt_sigpending __ia32_compat_sys_rt_sigpending diff --git a/arch/x86/ia32/ia32_signal.c b/arch/x86/ia32/ia32_signal.c index 513ba49c204fe..35ddf2c9848c6 100644 --- a/arch/x86/ia32/ia32_signal.c +++ b/arch/x86/ia32/ia32_signal.c @@ -21,6 +21,7 @@ #include <linux/personality.h> #include <linux/compat.h> #include <linux/binfmts.h> +#include <linux/syscalls.h> #include <asm/ucontext.h> #include <linux/uaccess.h> #include <asm/fpu/internal.h> @@ -118,7 +119,7 @@ static int ia32_restore_sigcontext(struct pt_regs *regs, return err; }

-asmlinkage long sys32_sigreturn(void) +COMPAT_SYSCALL_DEFINE0(sigreturn) { struct pt_regs *regs = current_pt_regs(); struct sigframe_ia32 __user *frame = (struct sigframe_ia32 __user *)(regs->sp-8); @@ -144,7 +145,7 @@ asmlinkage long sys32_sigreturn(void) return 0; }

-asmlinkage long sys32_rt_sigreturn(void) +COMPAT_SYSCALL_DEFINE0(rt_sigreturn) { struct pt_regs *regs = current_pt_regs(); struct rt_sigframe_ia32 __user *frame;

From: Alexandru Ardelean alexandru.ardelean@analog.com

[ Upstream commit 0c8a6e72f3c04bfe92a64e5e0791bfe006aabe08 ]

The iio_triggered_buffer_{predisable,postenable} functions attach/detach the poll functions.

The iio_triggered_buffer_predisable() should be called last, to detach the poll func after the devices has been suspended.

The position of iio_triggered_buffer_postenable() is correct.

Note this is not stable material. It's a fix in the logical model rather fixing an actual bug. These are being tidied up throughout the subsystem to allow more substantial rework that was blocked by variations in how things were done.

Signed-off-by: Alexandru Ardelean alexandru.ardelean@analog.com Acked-by: Matt Ranostay matt.ranostay@konsulko.com Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/iio/chemical/atlas-ph-sensor.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/iio/chemical/atlas-ph-sensor.c b/drivers/iio/chemical/atlas-ph-sensor.c index 3a20cb5d9bffc..6c175eb1c7a7f 100644 --- a/drivers/iio/chemical/atlas-ph-sensor.c +++ b/drivers/iio/chemical/atlas-ph-sensor.c @@ -323,16 +323,16 @@ static int atlas_buffer_predisable(struct iio_dev *indio_dev) struct atlas_data *data = iio_priv(indio_dev); int ret;

- ret = iio_triggered_buffer_predisable(indio_dev); + ret = atlas_set_interrupt(data, false); if (ret) return ret;

- ret = atlas_set_interrupt(data, false); + pm_runtime_mark_last_busy(&data->client->dev); + ret = pm_runtime_put_autosuspend(&data->client->dev); if (ret) return ret;

- pm_runtime_mark_last_busy(&data->client->dev); - return pm_runtime_put_autosuspend(&data->client->dev); + return iio_triggered_buffer_predisable(indio_dev); }

static const struct iio_trigger_ops atlas_interrupt_trigger_ops = {

From: Daniel Kurtz djkurtz@chromium.org

[ Upstream commit fadfee3f9d8f114435a8a3e9f83a227600d89de7 ]

When setting a new display mode, dw_hdmi_setup() calls dw_hdmi_enable_video_path(), which disables all hdmi clocks, including the audio clock.

We should only (re-)enable the audio clock if audio was already enabled when setting the new mode.

Without this patch, on RK3288, there will be HDMI audio on some monitors if i2s was played to headphone when the monitor was plugged. ACER H277HU and ASUS PB278 are two of the monitors showing this issue.

Signed-off-by: Cheng-Yi Chiang cychiang@chromium.org Signed-off-by: Daniel Kurtz djkurtz@chromium.org Signed-off-by: Yakir Yang ykk@rock-chips.com Reviewed-by: Neil Armstrong narmstrong@baylibre.com Signed-off-by: Neil Armstrong narmstrong@baylibre.com Link: https://patchwork.freedesktop.org/patch/msgid/20191008102145.55134-1-cychian... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c index fb396d550275c..2a0a1654d3ce5 100644 --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c @@ -1757,7 +1757,7 @@ static int dw_hdmi_setup(struct dw_hdmi *hdmi, struct drm_display_mode *mode)

/* HDMI Initialization Step E - Configure audio */ hdmi_clk_regenerator_update_pixel_clock(hdmi); - hdmi_enable_audio_clk(hdmi, true); + hdmi_enable_audio_clk(hdmi, hdmi->audio_enable); }

/* not for DVI mode */

From: Jin Yao yao.jin@linux.intel.com

[ Upstream commit 800d3f561659b5436f8c57e7c26dd1f6928b5615 ]

We received a user report that call-graph DWARF mode was enabled in 'perf record' but 'perf report' didn't unwind the callstack correctly. The reason was, libunwind was not compiled in.

We can use 'perf -vv' to check the compiled libraries but it would be valuable to report a warning to user directly (especially valuable for a perf newbie).

The warning is:

Warning: Please install libunwind development packages during the perf build.

Both TUI and stdio are supported.

Signed-off-by: Jin Yao yao.jin@linux.intel.com Cc: Alexander Shishkin alexander.shishkin@linux.intel.com Cc: Andi Kleen ak@linux.intel.com Cc: Jiri Olsa jolsa@kernel.org Cc: Kan Liang kan.liang@linux.intel.com Cc: Peter Zijlstra peterz@infradead.org Link: http://lore.kernel.org/lkml/20191011022122.26369-1-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo acme@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- tools/perf/builtin-report.c | 7 +++++++ 1 file changed, 7 insertions(+)

diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c index b2188e623e229..2f94f7ad65bdc 100644 --- a/tools/perf/builtin-report.c +++ b/tools/perf/builtin-report.c @@ -383,6 +383,13 @@ static int report__setup_sample_type(struct report *rep) PERF_SAMPLE_BRANCH_ANY)) rep->nonany_branch_mode = true;

+#ifndef HAVE_LIBUNWIND_SUPPORT + if (dwarf_callchain_users) { + ui__warning("Please install libunwind development packages " + "during the perf build.\n"); + } +#endif + return 0; }

From: Ingo Rohloff ingo.rohloff@lauterbach.com

[ Upstream commit abb0b3d96a1f9407dd66831ae33985a386d4200d ]

commit 1455cf8dbfd0 ("driver core: emit uevents when device is bound to a driver") added bind and unbind uevents when a driver is bound or unbound to a physical device.

For USB devices which are handled via the generic usbfs layer (via libusb for example), this is problematic: Each time a user space program calls ioctl(usb_fd, USBDEVFS_CLAIMINTERFACE, &usb_intf_nr); and then later ioctl(usb_fd, USBDEVFS_RELEASEINTERFACE, &usb_intf_nr); The kernel will now produce a bind or unbind event, which does not really contain any useful information.

This allows a user space program to run a DoS attack against programs which listen to uevents (in particular systemd/eudev/upowerd): A malicious user space program just has to call in a tight loop

ioctl(usb_fd, USBDEVFS_CLAIMINTERFACE, &usb_intf_nr); ioctl(usb_fd, USBDEVFS_RELEASEINTERFACE, &usb_intf_nr);

With this loop the malicious user space program floods the kernel and all programs listening to uevents with tons of bind and unbind events.

This patch suppresses uevents for ioctls USBDEVFS_CLAIMINTERFACE and USBDEVFS_RELEASEINTERFACE.

Signed-off-by: Ingo Rohloff ingo.rohloff@lauterbach.com Link: https://lore.kernel.org/r/20191011115518.2801-1-ingo.rohloff@lauterbach.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/core/devio.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 29c6414f48f13..00204824bffd8 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -739,8 +739,15 @@ static int claimintf(struct usb_dev_state *ps, unsigned int ifnum) intf = usb_ifnum_to_if(dev, ifnum); if (!intf) err = -ENOENT; - else + else { + unsigned int old_suppress; + + /* suppress uevents while claiming interface */ + old_suppress = dev_get_uevent_suppress(&intf->dev); + dev_set_uevent_suppress(&intf->dev, 1); err = usb_driver_claim_interface(&usbfs_driver, intf, ps); + dev_set_uevent_suppress(&intf->dev, old_suppress); + } if (err == 0) set_bit(ifnum, &ps->ifclaimed); return err; @@ -760,7 +767,13 @@ static int releaseintf(struct usb_dev_state *ps, unsigned int ifnum) if (!intf) err = -ENOENT; else if (test_and_clear_bit(ifnum, &ps->ifclaimed)) { + unsigned int old_suppress; + + /* suppress uevents while releasing interface */ + old_suppress = dev_get_uevent_suppress(&intf->dev); + dev_set_uevent_suppress(&intf->dev, 1); usb_driver_release_interface(&usbfs_driver, intf); + dev_set_uevent_suppress(&intf->dev, old_suppress); err = 0; } return err;

From: Alexandru Ardelean alexandru.ardelean@analog.com

[ Upstream commit c991bf9b650f39481cf3c1137092d4754a2c75de ]

This change replaces indio_dev's mlock with the driver's own lock. The lock is mostly needed to protect state when changing the `dac_cache` info. The lock has been extended to `ad7303_read_raw()`, to make sure that the cache is updated if an SPI-write is already in progress.

Signed-off-by: Alexandru Ardelean alexandru.ardelean@analog.com Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/iio/dac/ad7303.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/iio/dac/ad7303.c b/drivers/iio/dac/ad7303.c index 8f3bd19b6dc35..dc1aea5b579e4 100644 --- a/drivers/iio/dac/ad7303.c +++ b/drivers/iio/dac/ad7303.c @@ -42,6 +42,7 @@ struct ad7303_state { struct regulator *vdd_reg; struct regulator *vref_reg;

+ struct mutex lock; /* * DMA (thus cache coherency maintenance) requires the * transfer buffers to live in their own cache lines. @@ -80,7 +81,7 @@ static ssize_t ad7303_write_dac_powerdown(struct iio_dev *indio_dev, if (ret) return ret;

- mutex_lock(&indio_dev->mlock); + mutex_lock(&st->lock);

if (pwr_down) st->config |= AD7303_CFG_POWER_DOWN(chan->channel); @@ -91,7 +92,7 @@ static ssize_t ad7303_write_dac_powerdown(struct iio_dev *indio_dev, * mode, so just write one of the DAC channels again */ ad7303_write(st, chan->channel, st->dac_cache[chan->channel]);

- mutex_unlock(&indio_dev->mlock); + mutex_unlock(&st->lock); return len; }

@@ -117,7 +118,9 @@ static int ad7303_read_raw(struct iio_dev *indio_dev,

switch (info) { case IIO_CHAN_INFO_RAW: + mutex_lock(&st->lock); *val = st->dac_cache[chan->channel]; + mutex_unlock(&st->lock); return IIO_VAL_INT; case IIO_CHAN_INFO_SCALE: vref_uv = ad7303_get_vref(st, chan); @@ -145,11 +148,11 @@ static int ad7303_write_raw(struct iio_dev *indio_dev, if (val >= (1 << chan->scan_type.realbits) || val < 0) return -EINVAL;

- mutex_lock(&indio_dev->mlock); + mutex_lock(&st->lock); ret = ad7303_write(st, chan->address, val); if (ret == 0) st->dac_cache[chan->channel] = val; - mutex_unlock(&indio_dev->mlock); + mutex_unlock(&st->lock); break; default: ret = -EINVAL; @@ -212,6 +215,8 @@ static int ad7303_probe(struct spi_device *spi)

st->spi = spi;

+ mutex_init(&st->lock); + st->vdd_reg = devm_regulator_get(&spi->dev, "Vdd"); if (IS_ERR(st->vdd_reg)) return PTR_ERR(st->vdd_reg);

From: Szymon Janc szymon.janc@codecoup.pl

[ Upstream commit 4c371bb95cf06ded80df0e6139fdd77cee1d9a94 ]

It appears that some Broadcom controllers (eg BCM20702A0) reject LE Set Advertising Parameters command if advertising intervals provided are not within range for undirected and low duty directed advertising.

Workaround this bug by populating min and max intervals with 'valid' values.

< HCI Command: LE Set Advertising Parameters (0x08|0x0006) plen 15 Min advertising interval: 0.000 msec (0x0000) Max advertising interval: 0.000 msec (0x0000) Type: Connectable directed - ADV_DIRECT_IND (high duty cycle) (0x01) Own address type: Public (0x00) Direct address type: Random (0x01) Direct address: E2:F0:7B:9F:DC:F4 (Static) Channel map: 37, 38, 39 (0x07) Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00)

HCI Event: Command Complete (0x0e) plen 4

LE Set Advertising Parameters (0x08|0x0006) ncmd 1 Status: Invalid HCI Command Parameters (0x12)

Signed-off-by: Szymon Janc szymon.janc@codecoup.pl Tested-by: Sören Beye linux@hypfer.de Signed-off-by: Marcel Holtmann marcel@holtmann.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/bluetooth/hci_conn.c | 8 ++++++++ 1 file changed, 8 insertions(+)

diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c index 15d1cb5aee18d..f5c27065ad44c 100644 --- a/net/bluetooth/hci_conn.c +++ b/net/bluetooth/hci_conn.c @@ -931,6 +931,14 @@ static void hci_req_directed_advertising(struct hci_request *req, return;

memset(&cp, 0, sizeof(cp)); + + /* Some controllers might reject command if intervals are not + * within range for undirected advertising. + * BCM20702A0 is known to be affected by this. + */ + cp.min_interval = cpu_to_le16(0x0020); + cp.max_interval = cpu_to_le16(0x0020); + cp.type = LE_ADV_DIRECT_IND; cp.own_address_type = own_addr_type; cp.direct_addr_type = conn->dst_type;

From: Song Liu songliubraving@fb.com

[ Upstream commit eac9153f2b584c702cea02c1f1a57d85aa9aea42 ]

bpf stackmap with build-id lookup (BPF_F_STACK_BUILD_ID) can trigger A-A deadlock on rq_lock():

rcu: INFO: rcu_sched detected stalls on CPUs/tasks: [...] Call Trace: try_to_wake_up+0x1ad/0x590 wake_up_q+0x54/0x80 rwsem_wake+0x8a/0xb0 bpf_get_stack+0x13c/0x150 bpf_prog_fbdaf42eded9fe46_on_event+0x5e3/0x1000 bpf_overflow_handler+0x60/0x100 __perf_event_overflow+0x4f/0xf0 perf_swevent_overflow+0x99/0xc0 ___perf_sw_event+0xe7/0x120 __schedule+0x47d/0x620 schedule+0x29/0x90 futex_wait_queue_me+0xb9/0x110 futex_wait+0x139/0x230 do_futex+0x2ac/0xa50 __x64_sys_futex+0x13c/0x180 do_syscall_64+0x42/0x100 entry_SYSCALL_64_after_hwframe+0x44/0xa9

This can be reproduced by: 1. Start a multi-thread program that does parallel mmap() and malloc(); 2. taskset the program to 2 CPUs; 3. Attach bpf program to trace_sched_switch and gather stackmap with build-id, e.g. with trace.py from bcc tools: trace.py -U -p <pid> -s <some-bin,some-lib> t:sched:sched_switch

A sample reproducer is attached at the end.

This could also trigger deadlock with other locks that are nested with rq_lock.

Fix this by checking whether irqs are disabled. Since rq_lock and all other nested locks are irq safe, it is safe to do up_read() when irqs are not disable. If the irqs are disabled, postpone up_read() in irq_work.

Fixes: 615755a77b24 ("bpf: extend stackmap to save binary_build_id+offset instead of address") Signed-off-by: Song Liu songliubraving@fb.com Signed-off-by: Alexei Starovoitov ast@kernel.org Cc: Peter Zijlstra peterz@infradead.org Cc: Alexei Starovoitov ast@kernel.org Cc: Daniel Borkmann daniel@iogearbox.net Link: https://lore.kernel.org/bpf/20191014171223.357174-1-songliubraving@fb.com

Reproducer: ============================ 8< ============================

char *filename;

void *worker(void *p) { void *ptr; int fd; char *pptr;

fd = open(filename, O_RDONLY); if (fd < 0) return NULL; while (1) { struct timespec ts = {0, 1000 + rand() % 2000};

ptr = mmap(NULL, 4096 * 64, PROT_READ, MAP_PRIVATE, fd, 0); usleep(1); if (ptr == MAP_FAILED) { printf("failed to mmap\n"); break; } munmap(ptr, 4096 * 64); usleep(1); pptr = malloc(1); usleep(1); pptr[0] = 1; usleep(1); free(pptr); usleep(1); nanosleep(&ts, NULL); } close(fd); return NULL; }

int main(int argc, char *argv[]) { void *ptr; int i; pthread_t threads[THREAD_COUNT];

if (argc < 2) return 0;

filename = argv[1];

for (i = 0; i < THREAD_COUNT; i++) { if (pthread_create(threads + i, NULL, worker, NULL)) { fprintf(stderr, "Error creating thread\n"); return 0; } }

for (i = 0; i < THREAD_COUNT; i++) pthread_join(threads[i], NULL); return 0; } ============================ 8< ============================

Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/bpf/stackmap.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/kernel/bpf/stackmap.c b/kernel/bpf/stackmap.c index 7cb7a7f98a37d..55fff5e6d9831 100644 --- a/kernel/bpf/stackmap.c +++ b/kernel/bpf/stackmap.c @@ -292,7 +292,7 @@ static void stack_map_get_build_id_offset(struct bpf_stack_build_id *id_offs, bool irq_work_busy = false; struct stack_map_irq_work *work = NULL;

- if (in_nmi()) { + if (irqs_disabled()) { work = this_cpu_ptr(&up_read_work); if (work->irq_work.flags & IRQ_WORK_BUSY) /* cannot queue more up_read, fallback */ @@ -300,8 +300,9 @@ static void stack_map_get_build_id_offset(struct bpf_stack_build_id *id_offs, }

/* - * We cannot do up_read() in nmi context. To do build_id lookup - * in nmi context, we need to run up_read() in irq_work. We use + * We cannot do up_read() when the irq is disabled, because of + * risk to deadlock with rq_lock. To do build_id lookup when the + * irqs are disabled, we need to run up_read() in irq_work. We use * a percpu variable to do the irq_work. If the irq_work is * already used by another lookup, we fall back to report ips. *

From: Leo Yan leo.yan@linaro.org

[ Upstream commit 6a5f3d94cb69a185b921cb92c39888dc31009acb ]

As there are several discussions for enabling perf breakpoint signal testing on arm64 platform: arm64 needs to rely on single-step to execute the breakpointed instruction and then reinstall the breakpoint exception handler. But if we hook the breakpoint with a signal, the signal handler will do the stepping rather than the breakpointed instruction, this causes infinite loops as below:

Kernel space | Userspace ---------------------------------|-------------------------------- | __test_function() -> hit | breakpoint breakpoint_handler() | `-> user_enable_single_step() | do_signal() | | sig_handler() -> Step one | instruction and | trap to kernel single_step_handler() | `-> reinstall_suspended_bps() | | __test_function() -> hit | breakpoint again and | repeat up flow infinitely

As Will Deacon mentioned [1]: "that we require the overflow handler to do the stepping on arm/arm64, which is relied upon by GDB/ptrace. The hw_breakpoint code is a complete disaster so my preference would be to rip out the perf part and just implement something directly in ptrace, but it's a pretty horrible job". Though Will commented this on arm architecture, but the comment also can apply on arm64 architecture.

For complete information, I searched online and found a few years back, Wang Nan sent one patch 'arm64: Store breakpoint single step state into pstate' [2]; the patch tried to resolve this issue by avoiding single stepping in signal handler and defer to enable the signal stepping when return to __test_function(). The fixing was not merged due to the concern for missing to handle different usage cases.

Based on the info, the most feasible way is to skip Perf breakpoint signal testing for arm64 and this could avoid the duplicate investigation efforts when people see the failure. This patch skips this case on arm64 platform, which is same with arm architecture.

[1] https://lkml.org/lkml/2018/11/15/205 [2] https://lkml.org/lkml/2015/12/23/477

Signed-off-by: Leo Yan leo.yan@linaro.org Cc: Adrian Hunter adrian.hunter@intel.com Cc: Alexander Shishkin alexander.shishkin@linux.intel.com Cc: Brajeswar Ghosh brajeswar.linux@gmail.com Cc: Florian Fainelli f.fainelli@gmail.com Cc: Jiri Olsa jolsa@redhat.com Cc: Mark Rutland mark.rutland@arm.com Cc: Michael Petlan mpetlan@redhat.com Cc: Namhyung Kim namhyung@kernel.org Cc: Peter Zijlstra peterz@infradead.org Cc: Song Liu songliubraving@fb.com Cc: Souptick Joarder jrdr.linux@gmail.com Cc: Will Deacon will@kernel.org Link: http://lore.kernel.org/lkml/20191018085531.6348-3-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo acme@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- tools/perf/tests/bp_signal.c | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-)

diff --git a/tools/perf/tests/bp_signal.c b/tools/perf/tests/bp_signal.c index 910e25e641883..6cf00650602ef 100644 --- a/tools/perf/tests/bp_signal.c +++ b/tools/perf/tests/bp_signal.c @@ -48,14 +48,6 @@ asm ( "__test_function:\n" "incq (%rdi)\n" "ret\n"); -#elif defined (__aarch64__) -extern void __test_function(volatile long *ptr); -asm ( - ".globl __test_function\n" - "__test_function:\n" - "str x30, [x0]\n" - "ret\n"); - #else static void __test_function(volatile long *ptr) { @@ -301,10 +293,15 @@ bool test__bp_signal_is_supported(void) * stepping into the SIGIO handler and getting stuck on the * breakpointed instruction. * + * Since arm64 has the same issue with arm for the single-step + * handling, this case also gets suck on the breakpointed + * instruction. + * * Just disable the test for these architectures until these * issues are resolved. */ -#if defined(__powerpc__) || defined(__s390x__) || defined(__arm__) +#if defined(__powerpc__) || defined(__s390x__) || defined(__arm__) || \ + defined(__aarch64__) return false; #else return true;

From: Kangjie Lu kjlu@umn.edu

[ Upstream commit ec3b7b6eb8c90b52f61adff11b6db7a8db34de19 ]

"clock" may be copied to "best_clock". Initializing best_clock is not sufficient. The fix initializes clock as well to avoid memory disclosures and informaiton leaks.

Signed-off-by: Kangjie Lu kjlu@umn.edu Signed-off-by: Daniel Vetter daniel.vetter@ffwll.ch Link: https://patchwork.freedesktop.org/patch/msgid/20191018044150.1899-1-kjlu@umn... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/gma500/oaktrail_crtc.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/gma500/oaktrail_crtc.c b/drivers/gpu/drm/gma500/oaktrail_crtc.c index 1b7fd6a9d8a51..f73a02a2a5b39 100644 --- a/drivers/gpu/drm/gma500/oaktrail_crtc.c +++ b/drivers/gpu/drm/gma500/oaktrail_crtc.c @@ -139,6 +139,7 @@ static bool mrst_sdvo_find_best_pll(const struct gma_limit_t *limit, s32 freq_error, min_error = 100000;

memset(best_clock, 0, sizeof(*best_clock)); + memset(&clock, 0, sizeof(clock));

for (clock.m = limit->m.min; clock.m <= limit->m.max; clock.m++) { for (clock.n = limit->n.min; clock.n <= limit->n.max; @@ -195,6 +196,7 @@ static bool mrst_lvds_find_best_pll(const struct gma_limit_t *limit, int err = target;

memset(best_clock, 0, sizeof(*best_clock)); + memset(&clock, 0, sizeof(clock));

for (clock.m = limit->m.min; clock.m <= limit->m.max; clock.m++) { for (clock.p1 = limit->p1.min; clock.p1 <= limit->p1.max;

From: Chris Chiu chiu@endlessm.com

[ Upstream commit 0eeb91ade90ce06d2fa1e2fcb55e3316b64c203c ]

The RTL8723BU has problems connecting to AP after each warm reboot. Sometimes it returns no scan result, and in most cases, it fails the authentication for unknown reason. However, it works totally fine after cold reboot.

Compare the value of register SYS_CR and SYS_CLK_MAC_CLK_ENABLE for cold reboot and warm reboot, the registers imply that the MAC is already powered and thus some procedures are skipped during driver initialization. Double checked the vendor driver, it reads the SYS_CR and SYS_CLK_MAC_CLK_ENABLE also but doesn't skip any during initialization based on them. This commit only tells the RTL8723BU to do full initialization without checking MAC status.

Signed-off-by: Chris Chiu chiu@endlessm.com Signed-off-by: Jes Sorensen Jes.Sorensen@gmail.com Signed-off-by: Kalle Valo kvalo@codeaurora.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 1 + drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c | 1 + drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 3 +++ 3 files changed, 5 insertions(+)

diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h index 8828baf26e7b8..47c2bfe06d030 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h @@ -1349,6 +1349,7 @@ struct rtl8xxxu_fileops { u8 has_s0s1:1; u8 has_tx_report:1; u8 gen2_thermal_meter:1; + u8 needs_full_init:1; u32 adda_1t_init; u32 adda_1t_path_on; u32 adda_2t_path_on_a; diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c index 26b674aca1258..14e207f2466ca 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c @@ -1673,6 +1673,7 @@ struct rtl8xxxu_fileops rtl8723bu_fops = { .has_s0s1 = 1, .has_tx_report = 1, .gen2_thermal_meter = 1, + .needs_full_init = 1, .adda_1t_init = 0x01c00014, .adda_1t_path_on = 0x01c00014, .adda_2t_path_on_a = 0x01c00014, diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c index 2b4fcdf4ec5bb..66c6ee70f00aa 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c @@ -3905,6 +3905,9 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw) else macpower = true;

+ if (fops->needs_full_init) + macpower = false; + ret = fops->power_on(priv); if (ret < 0) { dev_warn(dev, "%s: Failed power on\n", __func__);

From: Thomas Gleixner tglx@linutronix.de

[ Upstream commit df4393424af3fbdcd5c404077176082a8ce459c4 ]

There is an issue with threaded interrupts which are marked ONESHOT and using the fasteoi handler:

if (IS_ONESHOT()) mask_irq(); .... cond_unmask_eoi_irq() chip->irq_eoi(); if (setaffinity_pending) { mask_ioapic(); ... move_affinity(); unmask_ioapic(); }

So if setaffinity is pending the interrupt will be moved and then unconditionally unmasked at the ioapic level, which is wrong in two aspects:

1) It should be kept masked up to the point where the threaded handler finished.

2) The physical chip state and the software masked state are inconsistent

Guard both the mask and the unmask with a check for the software masked state. If the line is marked masked then the ioapic line is also masked, so both mask_ioapic() and unmask_ioapic() can be skipped safely.

Signed-off-by: Thomas Gleixner tglx@linutronix.de Cc: Andy Shevchenko andy.shevchenko@gmail.com Cc: Linus Torvalds torvalds@linux-foundation.org Cc: Peter Zijlstra peterz@infradead.org Cc: Sebastian Siewior bigeasy@linutronix.de Fixes: 3aa551c9b4c4 ("genirq: add threaded interrupt handler support") Link: https://lkml.kernel.org/r/20191017101938.321393687@linutronix.de Signed-off-by: Ingo Molnar mingo@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/kernel/apic/io_apic.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index ab22eded61d25..fa3b85b222e31 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -1724,9 +1724,10 @@ static bool io_apic_level_ack_pending(struct mp_chip_data *data)

static inline bool ioapic_irqd_mask(struct irq_data *data) { - /* If we are moving the irq we need to mask it */ + /* If we are moving the IRQ we need to mask it */ if (unlikely(irqd_is_setaffinity_pending(data))) { - mask_ioapic_irq(data); + if (!irqd_irq_masked(data)) + mask_ioapic_irq(data); return true; } return false; @@ -1763,7 +1764,9 @@ static inline void ioapic_irqd_unmask(struct irq_data *data, bool masked) */ if (!io_apic_level_ack_pending(data->chip_data)) irq_move_masked_irq(data); - unmask_ioapic_irq(data); + /* If the IRQ is masked in the core, leave it: */ + if (!irqd_irq_masked(data)) + unmask_ioapic_irq(data); } } #else

From: Guoqing Jiang guoqing.jiang@cloud.ionos.com

[ Upstream commit fadcbd2901a0f7c8721f3bdb69eac95c272dc8ed ]

We need to move "spin_lock_irq(&bitmap->counts.lock)" before unmap previous storage, otherwise panic like belows could happen as follows.

[ 902.353802] sdl: detected capacity change from 1077936128 to 3221225472 [ 902.616948] general protection fault: 0000 [#1] SMP [snip] [ 902.618588] CPU: 12 PID: 33698 Comm: md0_raid1 Tainted: G O 4.14.144-1-pserver #4.14.144-1.1~deb10 [ 902.618870] Hardware name: Supermicro SBA-7142G-T4/BHQGE, BIOS 3.00 10/24/2012 [ 902.619120] task: ffff9ae1860fc600 task.stack: ffffb52e4c704000 [ 902.619301] RIP: 0010:bitmap_file_clear_bit+0x90/0xd0 [md_mod] [ 902.619464] RSP: 0018:ffffb52e4c707d28 EFLAGS: 00010087 [ 902.619626] RAX: ffe8008b0d061000 RBX: ffff9ad078c87300 RCX: 0000000000000000 [ 902.619792] RDX: ffff9ad986341868 RSI: 0000000000000803 RDI: ffff9ad078c87300 [ 902.619986] RBP: ffff9ad0ed7a8000 R08: 0000000000000000 R09: 0000000000000000 [ 902.620154] R10: ffffb52e4c707ec0 R11: ffff9ad987d1ed44 R12: ffff9ad0ed7a8360 [ 902.620320] R13: 0000000000000003 R14: 0000000000060000 R15: 0000000000000800 [ 902.620487] FS: 0000000000000000(0000) GS:ffff9ad987d00000(0000) knlGS:0000000000000000 [ 902.620738] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 902.620901] CR2: 000055ff12aecec0 CR3: 0000001005207000 CR4: 00000000000406e0 [ 902.621068] Call Trace: [ 902.621256] bitmap_daemon_work+0x2dd/0x360 [md_mod] [ 902.621429] ? find_pers+0x70/0x70 [md_mod] [ 902.621597] md_check_recovery+0x51/0x540 [md_mod] [ 902.621762] raid1d+0x5c/0xeb0 [raid1] [ 902.621939] ? try_to_del_timer_sync+0x4d/0x80 [ 902.622102] ? del_timer_sync+0x35/0x40 [ 902.622265] ? schedule_timeout+0x177/0x360 [ 902.622453] ? call_timer_fn+0x130/0x130 [ 902.622623] ? find_pers+0x70/0x70 [md_mod] [ 902.622794] ? md_thread+0x94/0x150 [md_mod] [ 902.622959] md_thread+0x94/0x150 [md_mod] [ 902.623121] ? wait_woken+0x80/0x80 [ 902.623280] kthread+0x119/0x130 [ 902.623437] ? kthread_create_on_node+0x60/0x60 [ 902.623600] ret_from_fork+0x22/0x40 [ 902.624225] RIP: bitmap_file_clear_bit+0x90/0xd0 [md_mod] RSP: ffffb52e4c707d28

Because mdadm was running on another cpu to do resize, so bitmap_resize was called to replace bitmap as below shows.

PID: 38801 TASK: ffff9ad074a90e00 CPU: 0 COMMAND: "mdadm" [exception RIP: queued_spin_lock_slowpath+56] [snip] -- <NMI exception stack> -- #5 [ffffb52e60f17c58] queued_spin_lock_slowpath at ffffffff9c0b27b8 #6 [ffffb52e60f17c58] bitmap_resize at ffffffffc0399877 [md_mod] #7 [ffffb52e60f17d30] raid1_resize at ffffffffc0285bf9 [raid1] #8 [ffffb52e60f17d50] update_size at ffffffffc038a31a [md_mod] #9 [ffffb52e60f17d70] md_ioctl at ffffffffc0395ca4 [md_mod]

And the procedure to keep resize bitmap safe is allocate new storage space, then quiesce, copy bits, replace bitmap, and re-start.

However the daemon (bitmap_daemon_work) could happen even the array is quiesced, which means when bitmap_file_clear_bit is triggered by raid1d, then it thinks it should be fine to access store->filemap since counts->lock is held, but resize could change the storage without the protection of the lock.

Cc: Jack Wang jinpu.wang@cloud.ionos.com Cc: NeilBrown neilb@suse.com Signed-off-by: Guoqing Jiang guoqing.jiang@cloud.ionos.com Signed-off-by: Song Liu songliubraving@fb.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/md/md-bitmap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/md/md-bitmap.c b/drivers/md/md-bitmap.c index 2fc8c113977fb..fd8607124bdbb 100644 --- a/drivers/md/md-bitmap.c +++ b/drivers/md/md-bitmap.c @@ -2132,6 +2132,7 @@ int md_bitmap_resize(struct bitmap *bitmap, sector_t blocks, memcpy(page_address(store.sb_page), page_address(bitmap->storage.sb_page), sizeof(bitmap_super_t)); + spin_lock_irq(&bitmap->counts.lock); md_bitmap_file_unmap(&bitmap->storage); bitmap->storage = store;

@@ -2147,7 +2148,6 @@ int md_bitmap_resize(struct bitmap *bitmap, sector_t blocks, blocks = min(old_counts.chunks << old_counts.chunkshift, chunks << chunkshift);

- spin_lock_irq(&bitmap->counts.lock); /* For cluster raid, need to pre-allocate bitmap */ if (mddev_is_clustered(bitmap->mddev)) { unsigned long page;

From: Nicholas Nunley nicholas.d.nunley@intel.com

[ Upstream commit 998e5166e604fd37afe94352f7b8c2d816b11049 ]

Since commit 92418fb14750 ("i40e/i40evf: Use usec value instead of reg value for ITR defines") the driver tracks the interrupt throttling intervals in single usec units, although the actual ITRN/ITR0 registers are programmed in 2 usec units. Most register programming flows in the driver correctly handle the conversion, although it is currently not applied when the registers are initialized to their default values. Most of the time this doesn't present a problem since the default values are usually immediately overwritten through the standard adaptive throttling mechanism, or updated manually by the user, but if adaptive throttling is disabled and the interval values are left alone then the incorrect value will persist.

Since the intended default interval of 50 usecs (vs. 100 usecs as programmed) performs better for most traffic workloads, this can lead to performance regressions.

This patch adds the correct conversion when writing the initial values to the ITRN registers.

Signed-off-by: Nicholas Nunley nicholas.d.nunley@intel.com Tested-by: Andrew Bowers andrewx.bowers@intel.com Signed-off-by: Jeff Kirsher jeffrey.t.kirsher@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/intel/i40e/i40e_main.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index 1a66373184d62..23b31b2ff5ccd 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -3441,14 +3441,14 @@ static void i40e_vsi_configure_msix(struct i40e_vsi *vsi) q_vector->rx.target_itr = ITR_TO_REG(vsi->rx_rings[i]->itr_setting); wr32(hw, I40E_PFINT_ITRN(I40E_RX_ITR, vector - 1), - q_vector->rx.target_itr); + q_vector->rx.target_itr >> 1); q_vector->rx.current_itr = q_vector->rx.target_itr;

q_vector->tx.next_update = jiffies + 1; q_vector->tx.target_itr = ITR_TO_REG(vsi->tx_rings[i]->itr_setting); wr32(hw, I40E_PFINT_ITRN(I40E_TX_ITR, vector - 1), - q_vector->tx.target_itr); + q_vector->tx.target_itr >> 1); q_vector->tx.current_itr = q_vector->tx.target_itr;

wr32(hw, I40E_PFINT_RATEN(vector - 1), @@ -3553,11 +3553,11 @@ static void i40e_configure_msi_and_legacy(struct i40e_vsi *vsi) /* set the ITR configuration */ q_vector->rx.next_update = jiffies + 1; q_vector->rx.target_itr = ITR_TO_REG(vsi->rx_rings[0]->itr_setting); - wr32(hw, I40E_PFINT_ITR0(I40E_RX_ITR), q_vector->rx.target_itr); + wr32(hw, I40E_PFINT_ITR0(I40E_RX_ITR), q_vector->rx.target_itr >> 1); q_vector->rx.current_itr = q_vector->rx.target_itr; q_vector->tx.next_update = jiffies + 1; q_vector->tx.target_itr = ITR_TO_REG(vsi->tx_rings[0]->itr_setting); - wr32(hw, I40E_PFINT_ITR0(I40E_TX_ITR), q_vector->tx.target_itr); + wr32(hw, I40E_PFINT_ITR0(I40E_TX_ITR), q_vector->tx.target_itr >> 1); q_vector->tx.current_itr = q_vector->tx.target_itr;

i40e_enable_misc_int_causes(pf); @@ -10735,7 +10735,7 @@ static int i40e_setup_misc_vector(struct i40e_pf *pf)

/* associate no queues to the misc vector */ wr32(hw, I40E_PFINT_LNKLST0, I40E_QUEUE_END_OF_LIST); - wr32(hw, I40E_PFINT_ITR0(I40E_RX_ITR), I40E_ITR_8K); + wr32(hw, I40E_PFINT_ITR0(I40E_RX_ITR), I40E_ITR_8K >> 1);

i40e_flush(hw);

From: Thierry Reding treding@nvidia.com

[ Upstream commit 24e64f86da40e68c5f58af08796110f147b12193 ]

The device tree bindings for the Tegra210 SOR don't require the controller instance to be defined, since the instance can be derived from the compatible string. The index is never used on Tegra210, so we got away with it not getting set. However, subsequent patches will change that, so make sure the proper index is used.

Signed-off-by: Thierry Reding treding@nvidia.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/tegra/sor.c | 5 +++++ 1 file changed, 5 insertions(+)

diff --git a/drivers/gpu/drm/tegra/sor.c b/drivers/gpu/drm/tegra/sor.c index d7fe9f15def1d..89cb70da2bfe6 100644 --- a/drivers/gpu/drm/tegra/sor.c +++ b/drivers/gpu/drm/tegra/sor.c @@ -2922,6 +2922,11 @@ static int tegra_sor_parse_dt(struct tegra_sor *sor) * earlier */ sor->pad = TEGRA_IO_PAD_HDMI_DP0 + sor->index; + } else { + if (sor->soc->supports_edp) + sor->index = 0; + else + sor->index = 1; }

return 0;

From: Hans de Goede hdegoede@redhat.com

[ Upstream commit 932e1ba486117de2fcea3df27ad8218ad6c11470 ]

The Medion Akoya E2215T's ACPI _LID implementation is quite broken:

1. For notifications it uses an ActiveLow Edge GpioInt, rather then an ActiveBoth one, meaning that the device is only notified when the lid is closed, not when it is opened.

2. Matching with this its _LID method simply always returns 0 (closed)

In order for the Linux LID code to work properly with this implementation, the lid_init_state selection needs to be set to ACPI_BUTTON_LID_INIT_OPEN.

This commit adds a DMI quirk for this.

Reviewed-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/acpi/button.c | 11 +++++++++++ 1 file changed, 11 insertions(+)

diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c index a19ff3977ac4a..870eb5c7516a5 100644 --- a/drivers/acpi/button.c +++ b/drivers/acpi/button.c @@ -91,6 +91,17 @@ static const struct dmi_system_id lid_blacklst[] = { DMI_MATCH(DMI_BIOS_VERSION, "BYT70A.YNCHENG.WIN.007"), }, }, + { + /* + * Medion Akoya E2215T, notification of the LID device only + * happens on close, not on open and _LID always returns closed. + */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "MEDION"), + DMI_MATCH(DMI_PRODUCT_NAME, "E2215T MD60198"), + }, + .driver_data = (void *)(long)ACPI_BUTTON_LID_INIT_OPEN, + }, {} };

From: Michal Kalderon michal.kalderon@marvell.com

[ Upstream commit 24e412c1e00ebfe73619e6b88cbc26c2c7d41b85 ]

User QPs pbl's weren't freed properly. MR pbls weren't freed properly.

Fixes: e0290cce6ac0 ("qedr: Add support for memory registeration verbs") Link: https://lore.kernel.org/r/20191027200451.28187-5-michal.kalderon@marvell.com Signed-off-by: Ariel Elior ariel.elior@marvell.com Signed-off-by: Michal Kalderon michal.kalderon@marvell.com Signed-off-by: Jason Gunthorpe jgg@mellanox.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/infiniband/hw/qedr/verbs.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/infiniband/hw/qedr/verbs.c b/drivers/infiniband/hw/qedr/verbs.c index 8cc3df24e04e4..9167a1c40bcf5 100644 --- a/drivers/infiniband/hw/qedr/verbs.c +++ b/drivers/infiniband/hw/qedr/verbs.c @@ -1701,6 +1701,14 @@ static void qedr_cleanup_user(struct qedr_dev *dev, struct qedr_qp *qp) if (qp->urq.umem) ib_umem_release(qp->urq.umem); qp->urq.umem = NULL; + + if (rdma_protocol_roce(&dev->ibdev, 1)) { + qedr_free_pbl(dev, &qp->usq.pbl_info, qp->usq.pbl_tbl); + qedr_free_pbl(dev, &qp->urq.pbl_info, qp->urq.pbl_tbl); + } else { + kfree(qp->usq.pbl_tbl); + kfree(qp->urq.pbl_tbl); + } }

static int qedr_create_user_qp(struct qedr_dev *dev, @@ -2809,8 +2817,8 @@ int qedr_dereg_mr(struct ib_mr *ib_mr)

dev->ops->rdma_free_tid(dev->rdma_ctx, mr->hw_mr.itid);

- if ((mr->type != QEDR_MR_DMA) && (mr->type != QEDR_MR_FRMR)) - qedr_free_pbl(dev, &mr->info.pbl_info, mr->info.pbl_table); + if (mr->type != QEDR_MR_DMA) + free_mr_info(dev, &mr->info);

/* it could be user registered memory. */ if (mr->umem)

From: Mao Wenan maowenan@huawei.com

[ Upstream commit b6989d248a2d13f02895bae1a9321b3bbccc0283 ]

When NET_DSA_SMSC_LAN9303=y and NET_DSA_SMSC_LAN9303_MDIO=y, below errors can be seen: drivers/net/dsa/lan9303_mdio.c:87:23: error: REGMAP_ENDIAN_LITTLE undeclared here (not in a function) .reg_format_endian = REGMAP_ENDIAN_LITTLE, drivers/net/dsa/lan9303_mdio.c:93:3: error: const struct regmap_config has no member named reg_read .reg_read = lan9303_mdio_read,

It should select REGMAP in config NET_DSA_SMSC_LAN9303.

Fixes: dc7005831523 ("net: dsa: LAN9303: add MDIO managed mode support") Signed-off-by: Mao Wenan maowenan@huawei.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/dsa/Kconfig | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/net/dsa/Kconfig b/drivers/net/dsa/Kconfig index d3ce1e4cb4d3c..dbfb6ad80fac8 100644 --- a/drivers/net/dsa/Kconfig +++ b/drivers/net/dsa/Kconfig @@ -66,6 +66,7 @@ config NET_DSA_REALTEK_SMI config NET_DSA_SMSC_LAN9303 tristate select NET_DSA_TAG_LAN9303 + select REGMAP ---help--- This enables support for the SMSC/Microchip LAN9303 3 port ethernet switch chips.

From: Stephan Gerhold stephan@gerhold.net

[ Upstream commit 64f86b9978449ff05bfa6c64b4c5439e21e9c80b ]

Commit f0b5c2c96370 ("phy: qcom-usb-hs: Replace the extcon API") switched from extcon_register_notifier() to the resource-managed API, i.e. devm_extcon_register_notifier().

This is problematic in this case, because the extcon notifier is dynamically registered/unregistered whenever the PHY is powered on/off. The resource-managed API does not unregister the notifier until the driver is removed, so as soon as the PHY is power cycled, attempting to register the notifier again results in:

double register detected WARNING: CPU: 1 PID: 182 at kernel/notifier.c:26 notifier_chain_register+0x74/0xa0 Call trace: ... extcon_register_notifier+0x74/0xb8 devm_extcon_register_notifier+0x54/0xb8 qcom_usb_hs_phy_power_on+0x1fc/0x208 ...

... and USB stops working after plugging the cable out and in another time.

The easiest way to fix this is to make a partial revert of commit f0b5c2c96370 ("phy: qcom-usb-hs: Replace the extcon API") and avoid using the resource-managed API in this case.

Fixes: f0b5c2c96370 ("phy: qcom-usb-hs: Replace the extcon API") Signed-off-by: Stephan Gerhold stephan@gerhold.net Signed-off-by: Kishon Vijay Abraham I kishon@ti.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/phy/qualcomm/phy-qcom-usb-hs.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-usb-hs.c b/drivers/phy/qualcomm/phy-qcom-usb-hs.c index abbbe75070daa..5629d56a62578 100644 --- a/drivers/phy/qualcomm/phy-qcom-usb-hs.c +++ b/drivers/phy/qualcomm/phy-qcom-usb-hs.c @@ -160,8 +160,8 @@ static int qcom_usb_hs_phy_power_on(struct phy *phy) /* setup initial state */ qcom_usb_hs_phy_vbus_notifier(&uphy->vbus_notify, state, uphy->vbus_edev); - ret = devm_extcon_register_notifier(&ulpi->dev, uphy->vbus_edev, - EXTCON_USB, &uphy->vbus_notify); + ret = extcon_register_notifier(uphy->vbus_edev, EXTCON_USB, + &uphy->vbus_notify); if (ret) goto err_ulpi; } @@ -182,6 +182,9 @@ static int qcom_usb_hs_phy_power_off(struct phy *phy) { struct qcom_usb_hs_phy *uphy = phy_get_drvdata(phy);

+ if (uphy->vbus_edev) + extcon_unregister_notifier(uphy->vbus_edev, EXTCON_USB, + &uphy->vbus_notify); regulator_disable(uphy->v3p3); regulator_disable(uphy->v1p8); clk_disable_unprepare(uphy->sleep_clk);

From: Gerald Schaefer gerald.schaefer@de.ibm.com

[ Upstream commit 2416cefc504ba8ae9b17e3e6b40afc72708f96be ]

Unlike pxd_free_tlb(), the pxd_free() functions do not check for folded page tables. This is not an issue so far, as those functions will actually never be called, since no code will reach them when page tables are folded.

In order to avoid future issues, and to make the s390 code more similar to other architectures, add mm_pxd_folded() checks, similar to how it is done in pxd_free_tlb().

This was found by testing a patch from from Anshuman Khandual, which is currently discussed on LKML ("mm/debug: Add tests validating architecture page table helpers").

Signed-off-by: Gerald Schaefer gerald.schaefer@de.ibm.com Signed-off-by: Vasily Gorbik gor@linux.ibm.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/s390/include/asm/pgalloc.h | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/arch/s390/include/asm/pgalloc.h b/arch/s390/include/asm/pgalloc.h index 5ee733720a571..67838df3f3f92 100644 --- a/arch/s390/include/asm/pgalloc.h +++ b/arch/s390/include/asm/pgalloc.h @@ -56,7 +56,12 @@ static inline p4d_t *p4d_alloc_one(struct mm_struct *mm, unsigned long address) crst_table_init(table, _REGION2_ENTRY_EMPTY); return (p4d_t *) table; } -#define p4d_free(mm, p4d) crst_table_free(mm, (unsigned long *) p4d) + +static inline void p4d_free(struct mm_struct *mm, p4d_t *p4d) +{ + if (!mm_p4d_folded(mm)) + crst_table_free(mm, (unsigned long *) p4d); +}

static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long address) { @@ -65,7 +70,12 @@ static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long address) crst_table_init(table, _REGION3_ENTRY_EMPTY); return (pud_t *) table; } -#define pud_free(mm, pud) crst_table_free(mm, (unsigned long *) pud) + +static inline void pud_free(struct mm_struct *mm, pud_t *pud) +{ + if (!mm_pud_folded(mm)) + crst_table_free(mm, (unsigned long *) pud); +}

static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long vmaddr) { @@ -83,6 +93,8 @@ static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long vmaddr)

static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd) { + if (mm_pmd_folded(mm)) + return; pgtable_pmd_page_dtor(virt_to_page(pmd)); crst_table_free(mm, (unsigned long *) pmd); }

From: John Garry john.garry@huawei.com

[ Upstream commit 130f4caf145c3562108b245a576db30b916199d2 ]

With CONFIG_DEBUG_TEST_DRIVER_REMOVE set, we may find the following WARN:

[ 23.452574] ------------[ cut here ]------------ [ 23.457190] WARNING: CPU: 59 PID: 1 at drivers/ata/libata-core.c:6676 ata_host_detach+0x15c/0x168 [ 23.466047] Modules linked in: [ 23.469092] CPU: 59 PID: 1 Comm: swapper/0 Not tainted 5.4.0-rc1-00010-g5b83fd27752b-dirty #296 [ 23.477776] Hardware name: Huawei D06 /D06, BIOS Hisilicon D06 UEFI RC0 - V1.16.01 03/15/2019 [ 23.486286] pstate: a0c00009 (NzCv daif +PAN +UAO) [ 23.491065] pc : ata_host_detach+0x15c/0x168 [ 23.495322] lr : ata_host_detach+0x88/0x168 [ 23.499491] sp : ffff800011cabb50 [ 23.502792] x29: ffff800011cabb50 x28: 0000000000000007 [ 23.508091] x27: ffff80001137f068 x26: ffff8000112c0c28 [ 23.513390] x25: 0000000000003848 x24: ffff0023ea185300 [ 23.518689] x23: 0000000000000001 x22: 00000000000014c0 [ 23.523987] x21: 0000000000013740 x20: ffff0023bdc20000 [ 23.529286] x19: 0000000000000000 x18: 0000000000000004 [ 23.534584] x17: 0000000000000001 x16: 00000000000000f0 [ 23.539883] x15: ffff0023eac13790 x14: ffff0023eb76c408 [ 23.545181] x13: 0000000000000000 x12: ffff0023eac13790 [ 23.550480] x11: ffff0023eb76c228 x10: 0000000000000000 [ 23.555779] x9 : ffff0023eac13798 x8 : 0000000040000000 [ 23.561077] x7 : 0000000000000002 x6 : 0000000000000001 [ 23.566376] x5 : 0000000000000002 x4 : 0000000000000000 [ 23.571674] x3 : ffff0023bf08a0bc x2 : 0000000000000000 [ 23.576972] x1 : 3099674201f72700 x0 : 0000000000400284 [ 23.582272] Call trace: [ 23.584706] ata_host_detach+0x15c/0x168 [ 23.588616] ata_pci_remove_one+0x10/0x18 [ 23.592615] ahci_remove_one+0x20/0x40 [ 23.596356] pci_device_remove+0x3c/0xe0 [ 23.600267] really_probe+0xdc/0x3e0 [ 23.603830] driver_probe_device+0x58/0x100 [ 23.608000] device_driver_attach+0x6c/0x90 [ 23.612169] __driver_attach+0x84/0xc8 [ 23.615908] bus_for_each_dev+0x74/0xc8 [ 23.619730] driver_attach+0x20/0x28 [ 23.623292] bus_add_driver+0x148/0x1f0 [ 23.627115] driver_register+0x60/0x110 [ 23.630938] __pci_register_driver+0x40/0x48 [ 23.635199] ahci_pci_driver_init+0x20/0x28 [ 23.639372] do_one_initcall+0x5c/0x1b0 [ 23.643199] kernel_init_freeable+0x1a4/0x24c [ 23.647546] kernel_init+0x10/0x108 [ 23.651023] ret_from_fork+0x10/0x18 [ 23.654590] ---[ end trace 634a14b675b71c13 ]---

With KASAN also enabled, we may also get many use-after-free reports.

The issue is that when CONFIG_DEBUG_TEST_DRIVER_REMOVE is set, we may attempt to detach the ata_port before it has been probed.

This is because the ata_ports are async probed, meaning that there is no guarantee that the ata_port has probed prior to detach. When the ata_port does probe in this scenario, we get all sorts of issues as the detach may have already happened.

Fix by ensuring synchronisation with async_synchronize_full(). We could alternatively use the cookie returned from the ata_port probe async_schedule() call, but that means managing the cookie, so more complicated.

Signed-off-by: John Garry john.garry@huawei.com Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/ata/libata-core.c | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 133fed8e4a8bb..85ee6c35d8e0b 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -6726,6 +6726,9 @@ void ata_host_detach(struct ata_host *host) { int i;

+ /* Ensure ata_port probe has completed */ + async_synchronize_full(); + for (i = 0; i < host->n_ports; i++) ata_port_detach(host->ports[i]);

From: Jiri Slaby jslaby@suse.cz

[ Upstream commit e9f691d899188679746eeb96e6cb520459eda9b4 ]

There are several reports that the BUG_ON on unsupported command in mv_qc_prep can be triggered under some circumstances: https://bugzilla.suse.com/show_bug.cgi?id=1110252 https://serverfault.com/questions/888897/raid-problems-after-power-outage https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1652185 https://bugs.centos.org/view.php?id=14998

Let sata_mv handle the failure gracefully: warn about that incl. the failed command number and return an AC_ERR_INVALID error. We can do that now thanks to the previous patch.

Remove also the long-standing FIXME.

[v2] use %.2x as commands are defined as hexa.

Signed-off-by: Jiri Slaby jslaby@suse.cz Cc: Jens Axboe axboe@kernel.dk Cc: linux-ide@vger.kernel.org Cc: Sergei Shtylyov sergei.shtylyov@cogentembedded.com Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/ata/sata_mv.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 73ba8e134ca9a..bb6c0220e2aca 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -2111,12 +2111,10 @@ static void mv_qc_prep(struct ata_queued_cmd *qc) * non-NCQ mode are: [RW] STREAM DMA and W DMA FUA EXT, none * of which are defined/used by Linux. If we get here, this * driver needs work. - * - * FIXME: modify libata to give qc_prep a return value and - * return error here. */ - BUG_ON(tf->command); - break; + ata_port_err(ap, "%s: unsupported command: %.2x\n", __func__, + tf->command); + return AC_ERR_INVALID; } mv_crqb_pack_cmd(cw++, tf->nsect, ATA_REG_NSECT, 0); mv_crqb_pack_cmd(cw++, tf->hob_lbal, ATA_REG_LBAL, 0);

From: Alexandru Ardelean alexandru.ardelean@analog.com

[ Upstream commit a7bddfe2dfce1d8859422124abe1964e0ecd386e ]

The iio_triggered_buffer_postenable() hook should be called first to attach the poll function. The iio_triggered_buffer_predisable() hook is called last (as is it should).

This change moves iio_triggered_buffer_postenable() to be called first. It adds iio_triggered_buffer_predisable() on the error paths of the postenable hook. For the predisable hook, some code-paths have been changed to make sure that the iio_triggered_buffer_predisable() hook gets called in case there is an error before it.

Signed-off-by: Alexandru Ardelean alexandru.ardelean@analog.com Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/iio/adc/dln2-adc.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-)

diff --git a/drivers/iio/adc/dln2-adc.c b/drivers/iio/adc/dln2-adc.c index c64c6675cae60..4ab052d76d9f5 100644 --- a/drivers/iio/adc/dln2-adc.c +++ b/drivers/iio/adc/dln2-adc.c @@ -527,6 +527,10 @@ static int dln2_adc_triggered_buffer_postenable(struct iio_dev *indio_dev) u16 conflict; unsigned int trigger_chan;

+ ret = iio_triggered_buffer_postenable(indio_dev); + if (ret) + return ret; + mutex_lock(&dln2->mutex);

/* Enable ADC */ @@ -540,6 +544,7 @@ static int dln2_adc_triggered_buffer_postenable(struct iio_dev *indio_dev) (int)conflict); ret = -EBUSY; } + iio_triggered_buffer_predisable(indio_dev); return ret; }

@@ -553,6 +558,7 @@ static int dln2_adc_triggered_buffer_postenable(struct iio_dev *indio_dev) mutex_unlock(&dln2->mutex); if (ret < 0) { dev_dbg(&dln2->pdev->dev, "Problem in %s\n", __func__); + iio_triggered_buffer_predisable(indio_dev); return ret; } } else { @@ -560,12 +566,12 @@ static int dln2_adc_triggered_buffer_postenable(struct iio_dev *indio_dev) mutex_unlock(&dln2->mutex); }

- return iio_triggered_buffer_postenable(indio_dev); + return 0; }

static int dln2_adc_triggered_buffer_predisable(struct iio_dev *indio_dev) { - int ret; + int ret, ret2; struct dln2_adc *dln2 = iio_priv(indio_dev);

mutex_lock(&dln2->mutex); @@ -580,12 +586,14 @@ static int dln2_adc_triggered_buffer_predisable(struct iio_dev *indio_dev) ret = dln2_adc_set_port_enabled(dln2, false, NULL);

mutex_unlock(&dln2->mutex); - if (ret < 0) { + if (ret < 0) dev_dbg(&dln2->pdev->dev, "Problem in %s\n", __func__); - return ret; - }

- return iio_triggered_buffer_predisable(indio_dev); + ret2 = iio_triggered_buffer_predisable(indio_dev); + if (ret == 0) + ret = ret2; + + return ret; }

static const struct iio_buffer_setup_ops dln2_adc_buffer_setup_ops = {

From: Luiz Augusto von Dentz luiz.von.dentz@intel.com

[ Upstream commit 6012b9346d8959194c239fd60a62dfec98d43048 ]

Instances may have flags set as part of its data in which case the code should not attempt to add it again otherwise it can cause duplication:

< HCI Command: LE Set Extended Advertising Data (0x08|0x0037) plen 35 Handle: 0x00 Operation: Complete extended advertising data (0x03) Fragment preference: Minimize fragmentation (0x01) Data length: 0x06 Flags: 0x04 BR/EDR Not Supported Flags: 0x06 LE General Discoverable Mode BR/EDR Not Supported

Signed-off-by: Luiz Augusto von Dentz luiz.von.dentz@intel.com Signed-off-by: Johan Hedberg johan.hedberg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/bluetooth/hci_request.c | 9 +++++++++ 1 file changed, 9 insertions(+)

diff --git a/net/bluetooth/hci_request.c b/net/bluetooth/hci_request.c index 9448ebd3780a3..a8ddd211e94c2 100644 --- a/net/bluetooth/hci_request.c +++ b/net/bluetooth/hci_request.c @@ -1258,6 +1258,14 @@ static u8 create_instance_adv_data(struct hci_dev *hdev, u8 instance, u8 *ptr)

instance_flags = get_adv_instance_flags(hdev, instance);

+ /* If instance already has the flags set skip adding it once + * again. + */ + if (adv_instance && eir_get_data(adv_instance->adv_data, + adv_instance->adv_data_len, EIR_FLAGS, + NULL)) + goto skip_flags; + /* The Add Advertising command allows userspace to set both the general * and limited discoverable flags. */ @@ -1290,6 +1298,7 @@ static u8 create_instance_adv_data(struct hci_dev *hdev, u8 instance, u8 *ptr) } }

+skip_flags: if (adv_instance) { memcpy(ptr, adv_instance->adv_data, adv_instance->adv_data_len);

From: Manjunath Patil manjunath.b.patil@oracle.com

[ Upstream commit 07066d9dc3d2326fbad8f7b0cb0120cff7b7dedb ]

HW timestamping can only be requested for a packet if the NIC is first setup via ioctl(SIOCSHWTSTAMP). If this step was skipped, then the ixgbe driver still allowed TX packets to request HW timestamping. In this situation, we see 'clearing Tx Timestamp hang' noise in the log.

Fix this by checking that the NIC is configured for HW TX timestamping before accepting a HW TX timestamping request.

Similar-to: commit 26bd4e2db06b ("igb: protect TX timestamping from API misuse") commit 0a6f2f05a2f5 ("igb: Fix a test with HWTSTAMP_TX_ON")

Signed-off-by: Manjunath Patil manjunath.b.patil@oracle.com Tested-by: Andrew Bowers andrewx.bowers@intel.com Signed-off-by: Jeff Kirsher jeffrey.t.kirsher@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index b45a6e2ed8d15..de65ca1e65580 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -8551,7 +8551,8 @@ netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *skb,

if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) && adapter->ptp_clock) { - if (!test_and_set_bit_lock(__IXGBE_PTP_TX_IN_PROGRESS, + if (adapter->tstamp_config.tx_type == HWTSTAMP_TX_ON && + !test_and_set_bit_lock(__IXGBE_PTP_TX_IN_PROGRESS, &adapter->state)) { skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS; tx_flags |= IXGBE_TX_FLAGS_TSTAMP;

From: Vandana BN bnvandana@gmail.com

[ Upstream commit 545b618cfb5cadacd00c25066b9a36540e5ca9e9 ]

v4l_s_fmt, for VFL_TYPE_TOUCH, sets unneeded members of the v4l2_pix_format structure to default values.This was missing in v4l_g_fmt, which would lead to failures in v4l2-compliance tests.

Signed-off-by: Vandana BN bnvandana@gmail.com Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Mauro Carvalho Chehab mchehab@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/v4l2-core/v4l2-ioctl.c | 33 +++++++++++++++------------- 1 file changed, 18 insertions(+), 15 deletions(-)

diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c b/drivers/media/v4l2-core/v4l2-ioctl.c index a4d3e94a400c8..7675b645db2ec 100644 --- a/drivers/media/v4l2-core/v4l2-ioctl.c +++ b/drivers/media/v4l2-core/v4l2-ioctl.c @@ -1415,10 +1415,26 @@ static int v4l_enum_fmt(const struct v4l2_ioctl_ops *ops, return ret; }

+static void v4l_pix_format_touch(struct v4l2_pix_format *p) +{ + /* + * The v4l2_pix_format structure contains fields that make no sense for + * touch. Set them to default values in this case. + */ + + p->field = V4L2_FIELD_NONE; + p->colorspace = V4L2_COLORSPACE_RAW; + p->flags = 0; + p->ycbcr_enc = 0; + p->quantization = 0; + p->xfer_func = 0; +} + static int v4l_g_fmt(const struct v4l2_ioctl_ops *ops, struct file *file, void *fh, void *arg) { struct v4l2_format *p = arg; + struct video_device *vfd = video_devdata(file); int ret = check_fmt(file, p->type);

if (ret) @@ -1456,6 +1472,8 @@ static int v4l_g_fmt(const struct v4l2_ioctl_ops *ops, ret = ops->vidioc_g_fmt_vid_cap(file, fh, arg); /* just in case the driver zeroed it again */ p->fmt.pix.priv = V4L2_PIX_FMT_PRIV_MAGIC; + if (vfd->vfl_type == VFL_TYPE_TOUCH) + v4l_pix_format_touch(&p->fmt.pix); return ret; case V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE: return ops->vidioc_g_fmt_vid_cap_mplane(file, fh, arg); @@ -1491,21 +1509,6 @@ static int v4l_g_fmt(const struct v4l2_ioctl_ops *ops, return -EINVAL; }

-static void v4l_pix_format_touch(struct v4l2_pix_format *p) -{ - /* - * The v4l2_pix_format structure contains fields that make no sense for - * touch. Set them to default values in this case. - */ - - p->field = V4L2_FIELD_NONE; - p->colorspace = V4L2_COLORSPACE_RAW; - p->flags = 0; - p->ycbcr_enc = 0; - p->quantization = 0; - p->xfer_func = 0; -} - static int v4l_s_fmt(const struct v4l2_ioctl_ops *ops, struct file *file, void *fh, void *arg) {

From: Marcel Holtmann marcel@holtmann.org

[ Upstream commit 8670b2b8b029a6650d133486be9d2ace146fd29a ]

udev has a feature of creating /dev/<node> device-nodes if it finds a devnode:<node> modalias. This allows for auto-loading of modules that provide the node. This requires to use a statically allocated minor number for misc character devices.

However, rfkill uses dynamic minor numbers and prevents auto-loading of the module. So allocate the next static misc minor number and use it for rfkill.

Signed-off-by: Marcel Holtmann marcel@holtmann.org Link: https://lore.kernel.org/r/20191024174042.19851-1-marcel@holtmann.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- include/linux/miscdevice.h | 1 + net/rfkill/core.c | 9 +++++++-- 2 files changed, 8 insertions(+), 2 deletions(-)

diff --git a/include/linux/miscdevice.h b/include/linux/miscdevice.h index 3247a3dc79348..b06b75776a32f 100644 --- a/include/linux/miscdevice.h +++ b/include/linux/miscdevice.h @@ -57,6 +57,7 @@ #define UHID_MINOR 239 #define USERIO_MINOR 240 #define VHOST_VSOCK_MINOR 241 +#define RFKILL_MINOR 242 #define MISC_DYNAMIC_MINOR 255

struct device; diff --git a/net/rfkill/core.c b/net/rfkill/core.c index 1355f5ca8d227..7fbc8314f6266 100644 --- a/net/rfkill/core.c +++ b/net/rfkill/core.c @@ -1328,10 +1328,12 @@ static const struct file_operations rfkill_fops = { .llseek = no_llseek, };

+#define RFKILL_NAME "rfkill" + static struct miscdevice rfkill_miscdev = { - .name = "rfkill", .fops = &rfkill_fops, - .minor = MISC_DYNAMIC_MINOR, + .name = RFKILL_NAME, + .minor = RFKILL_MINOR, };

static int __init rfkill_init(void) @@ -1383,3 +1385,6 @@ static void __exit rfkill_exit(void) class_unregister(&rfkill_class); } module_exit(rfkill_exit); + +MODULE_ALIAS_MISCDEV(RFKILL_MINOR); +MODULE_ALIAS("devname:" RFKILL_NAME);

From: Pan Bian bianpan2016@163.com

[ Upstream commit e9a8ba9769a0e354341bc6cc01b98aadcea1dfe9 ]

The channels spfi->tx_ch and spfi->rx_ch are not set to NULL after they are released. As a result, they will be released again, either on the error handling branch in the same function or in the corresponding remove function, i.e. img_spfi_remove(). This patch fixes the bug by setting the two members to NULL.

Signed-off-by: Pan Bian bianpan2016@163.com Link: https://lore.kernel.org/r/1573007769-20131-1-git-send-email-bianpan2016@163.... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi-img-spfi.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/drivers/spi/spi-img-spfi.c b/drivers/spi/spi-img-spfi.c index e6eb979f1b8a0..e4b31d6e6e33e 100644 --- a/drivers/spi/spi-img-spfi.c +++ b/drivers/spi/spi-img-spfi.c @@ -676,6 +676,8 @@ static int img_spfi_probe(struct platform_device *pdev) dma_release_channel(spfi->tx_ch); if (spfi->rx_ch) dma_release_channel(spfi->rx_ch); + spfi->tx_ch = NULL; + spfi->rx_ch = NULL; dev_warn(spfi->dev, "Failed to get DMA channels, falling back to PIO mode\n"); } else { master->dma_tx = spfi->tx_ch;

From: Ping-Ke Shih pkshih@realtek.com

[ Upstream commit 5174f1e41074b5186608badc2e89441d021e8c08 ]

This leak was found by testing the EDIMAX EW-7612 on Raspberry Pi 3B+ with Linux 5.4-rc5 (multi_v7_defconfig + rtlwifi + kmemleak) and noticed a single memory leak during probe:

unreferenced object 0xec13ee40 (size 176): comm "kworker/u8:1", pid 36, jiffies 4294939321 (age 5580.790s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<fc1bbb3e>] __netdev_alloc_skb+0x9c/0x164 [<863dfa6e>] rtl92c_set_fw_rsvdpagepkt+0x254/0x340 [rtl8192c_common] [<9572be0d>] rtl92cu_set_hw_reg+0xf48/0xfa4 [rtl8192cu] [<116df4d8>] rtl_op_bss_info_changed+0x234/0x96c [rtlwifi] [<8933575f>] ieee80211_bss_info_change_notify+0xb8/0x264 [mac80211] [<d4061e86>] ieee80211_assoc_success+0x934/0x1798 [mac80211] [<e55adb56>] ieee80211_rx_mgmt_assoc_resp+0x174/0x314 [mac80211] [<5974629e>] ieee80211_sta_rx_queued_mgmt+0x3f4/0x7f0 [mac80211] [<d91091c6>] ieee80211_iface_work+0x208/0x318 [mac80211] [<ac5fcae4>] process_one_work+0x22c/0x564 [<f5e6d3b6>] worker_thread+0x44/0x5d8 [<82c7b073>] kthread+0x150/0x154 [<b43e1b7d>] ret_from_fork+0x14/0x2c [<794dff30>] 0x0

It is because 8192cu doesn't implement usb_cmd_send_packet(), and this patch just frees the skb within the function to resolve memleak problem by now. Since 8192cu doesn't turn on fwctrl_lps that needs to download command packet for firmware via the function, applying this patch doesn't affect driver behavior.

Reported-by: Stefan Wahren wahrenst@gmx.net Signed-off-by: Ping-Ke Shih pkshih@realtek.com Signed-off-by: Kalle Valo kvalo@codeaurora.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c index 1e60f70481f58..8c60a84941d55 100644 --- a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c +++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c @@ -1556,6 +1556,8 @@ static bool usb_cmd_send_packet(struct ieee80211_hw *hw, struct sk_buff *skb) * This is maybe necessary: * rtlpriv->cfg->ops->fill_tx_cmddesc(hw, buffer, 1, 1, skb); */ + dev_kfree_skb(skb); + return true; }

From: Masami Hiramatsu mhiramat@kernel.org

[ Upstream commit 3895534dd78f0fd4d3f9e05ee52b9cdd444a743e ]

Since debuginfo__find_probe_point() uses dwarf_entrypc() for finding the entry address of the function on which a probe is, it will fail when the function DIE has only ranges attribute.

To fix this issue, use die_entrypc() instead of dwarf_entrypc().

Without this fix, perf probe -l shows incorrect offset:

# perf probe -l probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask+18446744071579263632@work/linux/linux/kernel/cpu.c) probe:clear_tasks_mm_cpumask_1 (on clear_tasks_mm_cpumask+18446744071579263752@work/linux/linux/kernel/cpu.c)

With this:

# perf probe -l probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask@work/linux/linux/kernel/cpu.c) probe:clear_tasks_mm_cpumask_1 (on clear_tasks_mm_cpumask:21@work/linux/linux/kernel/cpu.c)

Committer testing:

Before:

[root@quaco ~]# perf probe -l probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask+18446744071579765152@kernel/cpu.c) [root@quaco ~]#

After:

[root@quaco ~]# perf probe -l probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask@kernel/cpu.c) [root@quaco ~]#

Fixes: 1d46ea2a6a40 ("perf probe: Fix listing incorrect line number with inline function") Signed-off-by: Masami Hiramatsu mhiramat@kernel.org Tested-by: Arnaldo Carvalho de Melo acme@redhat.com Cc: Jiri Olsa jolsa@redhat.com Cc: Namhyung Kim namhyung@kernel.org Link: http://lore.kernel.org/lkml/157199321227.8075.14655572419136993015.stgit@dev... Signed-off-by: Arnaldo Carvalho de Melo acme@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- tools/perf/util/probe-finder.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/tools/perf/util/probe-finder.c b/tools/perf/util/probe-finder.c index c37fbef1711dd..c4fe0678e3228 100644 --- a/tools/perf/util/probe-finder.c +++ b/tools/perf/util/probe-finder.c @@ -1567,7 +1567,7 @@ int debuginfo__find_probe_point(struct debuginfo *dbg, unsigned long addr, /* Get function entry information */ func = basefunc = dwarf_diename(&spdie); if (!func || - dwarf_entrypc(&spdie, &baseaddr) != 0 || + die_entrypc(&spdie, &baseaddr) != 0 || dwarf_decl_line(&spdie, &baseline) != 0) { lineno = 0; goto post; @@ -1584,7 +1584,7 @@ int debuginfo__find_probe_point(struct debuginfo *dbg, unsigned long addr, while (die_find_top_inlinefunc(&spdie, (Dwarf_Addr)addr, &indie)) { /* There is an inline function */ - if (dwarf_entrypc(&indie, &_addr) == 0 && + if (die_entrypc(&indie, &_addr) == 0 && _addr == addr) { /* * addr is at an inline function entry.

From: Masami Hiramatsu mhiramat@kernel.org

[ Upstream commit acb6a7047ac2146b723fef69ee1ab6b7143546bf ]

Since some inlined functions are in lexical blocks of given function, we have to recursively walk through the DIE tree. Without this fix, perf-probe -L can miss the inlined functions which is in a lexical block (like if (..) { func() } case.)

However, even though, to walk the lines in a given function, we don't need to follow the children DIE of inlined functions because those do not have any lines in the specified function.

We need to walk though whole trees only if we walk all lines in a given file, because an inlined function can include another inlined function in the same file.

Fixes: b0e9cb2802d4 ("perf probe: Fix to search nested inlined functions in CU") Signed-off-by: Masami Hiramatsu mhiramat@kernel.org Cc: Jiri Olsa jolsa@redhat.com Cc: Namhyung Kim namhyung@kernel.org Link: http://lore.kernel.org/lkml/157190836514.1859.15996864849678136353.stgit@dev... Signed-off-by: Arnaldo Carvalho de Melo acme@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- tools/perf/util/dwarf-aux.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-)

diff --git a/tools/perf/util/dwarf-aux.c b/tools/perf/util/dwarf-aux.c index 5bbb87f63ecba..6e7cb3537ce01 100644 --- a/tools/perf/util/dwarf-aux.c +++ b/tools/perf/util/dwarf-aux.c @@ -691,10 +691,9 @@ static int __die_walk_funclines_cb(Dwarf_Die *in_die, void *data) if (lw->retval != 0) return DIE_FIND_CB_END; } + if (!lw->recursive) + return DIE_FIND_CB_SIBLING; } - if (!lw->recursive) - /* Don't need to search recursively */ - return DIE_FIND_CB_SIBLING;

if (addr) { fname = dwarf_decl_file(in_die); @@ -741,6 +740,10 @@ static int __die_walk_culines_cb(Dwarf_Die *sp_die, void *data) { struct __line_walk_param *lw = data;

+ /* + * Since inlined function can include another inlined function in + * the same file, we need to walk in it recursively. + */ lw->retval = __die_walk_funclines(sp_die, true, lw->callback, lw->data); if (lw->retval != 0) return DWARF_CB_ABORT; @@ -830,8 +833,9 @@ int die_walk_lines(Dwarf_Die *rt_die, line_walk_callback_t callback, void *data) */ if (rt_die != cu_die) /* - * Don't need walk functions recursively, because nested - * inlined functions don't have lines of the specified DIE. + * Don't need walk inlined functions recursively, because + * inner inlined functions don't have the lines of the + * specified function. */ ret = __die_walk_funclines(rt_die, false, callback, data); else {

From: Masami Hiramatsu mhiramat@kernel.org

[ Upstream commit af04dd2f8ebaa8fbd46f698714acbf43da14da45 ]

Fix to show ranges of variables (--range and --vars option) in functions which DIE has only ranges but no entry_pc attribute.

Without this fix:

# perf probe --range -V clear_tasks_mm_cpumask Available variables at clear_tasks_mm_cpumask @<clear_tasks_mm_cpumask+0> (No matched variables)

With this fix:

# perf probe --range -V clear_tasks_mm_cpumask Available variables at clear_tasks_mm_cpumask @<clear_tasks_mm_cpumask+0> [VAL] int cpu @<clear_tasks_mm_cpumask+[0-35,317-317,2052-2059]>

Committer testing:

Before:

[root@quaco ~]# perf probe --range -V clear_tasks_mm_cpumask Available variables at clear_tasks_mm_cpumask @<clear_tasks_mm_cpumask+0> (No matched variables) [root@quaco ~]#

After:

[root@quaco ~]# perf probe --range -V clear_tasks_mm_cpumask Available variables at clear_tasks_mm_cpumask @<clear_tasks_mm_cpumask+0> [VAL] int cpu @<clear_tasks_mm_cpumask+[0-23,23-105,105-106,106-106,1843-1850,1850-1862]> [root@quaco ~]#

Using it:

[root@quaco ~]# perf probe clear_tasks_mm_cpumask cpu Added new event: probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask with cpu)

You can now use it in all perf tools, such as:

perf record -e probe:clear_tasks_mm_cpumask -aR sleep 1

[root@quaco ~]# perf probe -l probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask@kernel/cpu.c with cpu) [root@quaco ~]# [root@quaco ~]# perf trace -e probe:*cpumask ^C[root@quaco ~]#

Fixes: 349e8d261131 ("perf probe: Add --range option to show a variable's location range") Signed-off-by: Masami Hiramatsu mhiramat@kernel.org Tested-by: Arnaldo Carvalho de Melo acme@redhat.com Cc: Jiri Olsa jolsa@redhat.com Cc: Namhyung Kim namhyung@kernel.org Link: http://lore.kernel.org/lkml/157199323018.8075.8179744380479673672.stgit@devn... Signed-off-by: Arnaldo Carvalho de Melo acme@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- tools/perf/util/dwarf-aux.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/tools/perf/util/dwarf-aux.c b/tools/perf/util/dwarf-aux.c index 6e7cb3537ce01..14a3da24a0a86 100644 --- a/tools/perf/util/dwarf-aux.c +++ b/tools/perf/util/dwarf-aux.c @@ -1010,7 +1010,7 @@ static int die_get_var_innermost_scope(Dwarf_Die *sp_die, Dwarf_Die *vr_die, bool first = true; const char *name;

- ret = dwarf_entrypc(sp_die, &entry); + ret = die_entrypc(sp_die, &entry); if (ret) return ret;

@@ -1073,7 +1073,7 @@ int die_get_var_range(Dwarf_Die *sp_die, Dwarf_Die *vr_die, struct strbuf *buf) bool first = true; const char *name;

- ret = dwarf_entrypc(sp_die, &entry); + ret = die_entrypc(sp_die, &entry); if (ret) return ret;

From: James Clark James.Clark@arm.com

[ Upstream commit 22bd8f1b5a1dd168ba4eba27cb17643a11012f5d ]

When a 'make DEBUG=1' build is done, the command parser is still built with -O6 and is hard to step through, fix it making it use -O0 in that case.

Signed-off-by: James Clark james.clark@arm.com Cc: Adrian Hunter adrian.hunter@intel.com Cc: Ian Rogers irogers@google.com Cc: Jiri Olsa jolsa@kernel.org Cc: Josh Poimboeuf jpoimboe@redhat.com Cc: Namhyung Kim namhyung@kernel.org Cc: nd nd@arm.com Link: http://lore.kernel.org/lkml/20191028113340.4282-1-james.clark@arm.com [ split from a larger patch ] Signed-off-by: Arnaldo Carvalho de Melo acme@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- tools/lib/subcmd/Makefile | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/tools/lib/subcmd/Makefile b/tools/lib/subcmd/Makefile index 5b2cd5e58df09..5dbb0dde208c4 100644 --- a/tools/lib/subcmd/Makefile +++ b/tools/lib/subcmd/Makefile @@ -28,7 +28,9 @@ ifeq ($(DEBUG),0) endif endif

-ifeq ($(CC_NO_CLANG), 0) +ifeq ($(DEBUG),1) + CFLAGS += -O0 +else ifeq ($(CC_NO_CLANG), 0) CFLAGS += -O3 else CFLAGS += -O6

From: Ian Rogers irogers@google.com

[ Upstream commit 8e8714c3d157568b7a769917a5e05573bbaf5af0 ]

If event parsing fails the event list is leaked, instead splice the list onto the out result and let the caller cleanup.

An example input for parse_events found by libFuzzer that reproduces this memory leak is 'm{'.

Signed-off-by: Ian Rogers irogers@google.com Acked-by: Jiri Olsa jolsa@kernel.org Cc: Adrian Hunter adrian.hunter@intel.com Cc: Alexander Shishkin alexander.shishkin@linux.intel.com Cc: Alexei Starovoitov ast@kernel.org Cc: Andi Kleen ak@linux.intel.com Cc: Daniel Borkmann daniel@iogearbox.net Cc: Jin Yao yao.jin@linux.intel.com Cc: John Garry john.garry@huawei.com Cc: Kan Liang kan.liang@linux.intel.com Cc: Mark Rutland mark.rutland@arm.com Cc: Martin KaFai Lau kafai@fb.com Cc: Namhyung Kim namhyung@kernel.org Cc: Peter Zijlstra peterz@infradead.org Cc: Song Liu songliubraving@fb.com Cc: Stephane Eranian eranian@google.com Cc: Yonghong Song yhs@fb.com Cc: bpf@vger.kernel.org Cc: clang-built-linux@googlegroups.com Cc: netdev@vger.kernel.org Link: http://lore.kernel.org/lkml/20191025180827.191916-5-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo acme@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- tools/perf/util/parse-events.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-)

diff --git a/tools/perf/util/parse-events.c b/tools/perf/util/parse-events.c index 1a7c76d2baa80..7ea1a230e89d0 100644 --- a/tools/perf/util/parse-events.c +++ b/tools/perf/util/parse-events.c @@ -1843,15 +1843,20 @@ int parse_events(struct perf_evlist *evlist, const char *str,

ret = parse_events__scanner(str, &parse_state, PE_START_EVENTS); perf_pmu__parse_cleanup(); + + if (!ret && list_empty(&parse_state.list)) { + WARN_ONCE(true, "WARNING: event parser found nothing\n"); + return -1; + } + + /* + * Add list to the evlist even with errors to allow callers to clean up. + */ + perf_evlist__splice_list_tail(evlist, &parse_state.list); + if (!ret) { struct perf_evsel *last;

- if (list_empty(&parse_state.list)) { - WARN_ONCE(true, "WARNING: event parser found nothing\n"); - return -1; - } - - perf_evlist__splice_list_tail(evlist, &parse_state.list); evlist->nr_groups += parse_state.nr_groups; last = perf_evlist__last(evlist); last->cmdline_group_boundary = true;

From: Pan Bian bianpan2016@163.com

[ Upstream commit 946ab8db6953535a3a88c957db8328beacdfed9d ]

The object fence is not set to NULL after its reference is dropped. As a result, its reference may be dropped again if error occurs after that, which may lead to a use after free bug. To avoid the issue, fence is explicitly set to NULL after dropping its reference.

Acked-by: Christian König christian.koenig@amd.com Signed-off-by: Pan Bian bianpan2016@163.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_test.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_test.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_test.c index 8904e62dca7ae..41d3142ef3cf0 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_test.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_test.c @@ -138,6 +138,7 @@ static void amdgpu_do_test_moves(struct amdgpu_device *adev) }

dma_fence_put(fence); + fence = NULL;

r = amdgpu_bo_kmap(vram_obj, &vram_map); if (r) { @@ -183,6 +184,7 @@ static void amdgpu_do_test_moves(struct amdgpu_device *adev) }

dma_fence_put(fence); + fence = NULL;

r = amdgpu_bo_kmap(gtt_obj[i], &gtt_map); if (r) {

From: Ian Rogers irogers@google.com

[ Upstream commit 38f2c4226e6bc3e8c41c318242821ba5dc825aba ]

Avoid a memory leak when the configuration fails.

Signed-off-by: Ian Rogers irogers@google.com Acked-by: Jiri Olsa jolsa@kernel.org Cc: Adrian Hunter adrian.hunter@intel.com Cc: Alexander Shishkin alexander.shishkin@linux.intel.com Cc: Alexei Starovoitov ast@kernel.org Cc: Andi Kleen ak@linux.intel.com Cc: Daniel Borkmann daniel@iogearbox.net Cc: Jin Yao yao.jin@linux.intel.com Cc: John Garry john.garry@huawei.com Cc: Kan Liang kan.liang@linux.intel.com Cc: Mark Rutland mark.rutland@arm.com Cc: Martin KaFai Lau kafai@fb.com Cc: Namhyung Kim namhyung@kernel.org Cc: Peter Zijlstra peterz@infradead.org Cc: Song Liu songliubraving@fb.com Cc: Stephane Eranian eranian@google.com Cc: Yonghong Song yhs@fb.com Cc: bpf@vger.kernel.org Cc: clang-built-linux@googlegroups.com Cc: netdev@vger.kernel.org Link: http://lore.kernel.org/lkml/20191030223448.12930-9-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo acme@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- tools/perf/util/parse-events.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/tools/perf/util/parse-events.c b/tools/perf/util/parse-events.c index 7ea1a230e89d0..95043cae57740 100644 --- a/tools/perf/util/parse-events.c +++ b/tools/perf/util/parse-events.c @@ -1282,8 +1282,15 @@ int parse_events_add_pmu(struct parse_events_state *parse_state, if (get_config_terms(head_config, &config_terms)) return -ENOMEM;

- if (perf_pmu__config(pmu, &attr, head_config, parse_state->error)) + if (perf_pmu__config(pmu, &attr, head_config, parse_state->error)) { + struct perf_evsel_config_term *pos, *tmp; + + list_for_each_entry_safe(pos, tmp, &config_terms, list) { + list_del_init(&pos->list); + free(pos); + } return -EINVAL; + }

evsel = __add_event(list, &parse_state->idx, &attr, get_config_name(head_config), pmu,

From: Masami Hiramatsu mhiramat@kernel.org

[ Upstream commit c701636aeec4c173208697d68da6e4271125564b ]

Make find_best_scope() returns innermost DIE at given address if there is no best matched scope DIE. Since Gcc sometimes generates intuitively strange line info which is out of inlined function address range, we need this fixup.

Without this, sometimes perf probe failed to probe on a line inside an inlined function:

# perf probe -D ksys_open:3 Failed to find scope of probe point. Error: Failed to add events.

With this fix, 'perf probe' can probe it:

# perf probe -D ksys_open:3 p:probe/ksys_open _text+25707308 p:probe/ksys_open_1 _text+25710596 p:probe/ksys_open_2 _text+25711114 p:probe/ksys_open_3 _text+25711343 p:probe/ksys_open_4 _text+25714058 p:probe/ksys_open_5 _text+2819653 p:probe/ksys_open_6 _text+2819701

Signed-off-by: Masami Hiramatsu mhiramat@kernel.org Tested-by: Arnaldo Carvalho de Melo acme@redhat.com Cc: Namhyung Kim namhyung@kernel.org Cc: Ravi Bangoria ravi.bangoria@linux.ibm.com Cc: Steven Rostedt (VMware) rostedt@goodmis.org Cc: Tom Zanussi tom.zanussi@linux.intel.com Link: http://lore.kernel.org/lkml/157291300887.19771.14936015360963292236.stgit@de... Signed-off-by: Arnaldo Carvalho de Melo acme@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- tools/perf/util/probe-finder.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-)

diff --git a/tools/perf/util/probe-finder.c b/tools/perf/util/probe-finder.c index 946b027b45e8a..7ccabb891e5a3 100644 --- a/tools/perf/util/probe-finder.c +++ b/tools/perf/util/probe-finder.c @@ -764,6 +764,16 @@ static int find_best_scope_cb(Dwarf_Die *fn_die, void *data) return 0; }

+/* Return innermost DIE */ +static int find_inner_scope_cb(Dwarf_Die *fn_die, void *data) +{ + struct find_scope_param *fsp = data; + + memcpy(fsp->die_mem, fn_die, sizeof(Dwarf_Die)); + fsp->found = true; + return 1; +} + /* Find an appropriate scope fits to given conditions */ static Dwarf_Die *find_best_scope(struct probe_finder *pf, Dwarf_Die *die_mem) { @@ -775,8 +785,13 @@ static Dwarf_Die *find_best_scope(struct probe_finder *pf, Dwarf_Die *die_mem) .die_mem = die_mem, .found = false, }; + int ret;

- cu_walk_functions_at(&pf->cu_die, pf->addr, find_best_scope_cb, &fsp); + ret = cu_walk_functions_at(&pf->cu_die, pf->addr, find_best_scope_cb, + &fsp); + if (!ret && !fsp.found) + cu_walk_functions_at(&pf->cu_die, pf->addr, + find_inner_scope_cb, &fsp);

return fsp.found ? die_mem : NULL; }

From: Masami Hiramatsu mhiramat@kernel.org

[ Upstream commit f4d99bdfd124823a81878b44b5e8750b97f73902 ]

Skip end-of-sequence and non-statement lines while walking through lines list.

The "end-of-sequence" line information means:

"the current address is that of the first byte after the end of a sequence of target machine instructions." (DWARF version 4 spec 6.2.2)

This actually means out of scope and we can not probe on it.

On the other hand, the statement lines (is_stmt) means:

"the current instruction is a recommended breakpoint location. A recommended breakpoint location is intended to “represent” a line, a statement and/or a semantically distinct subpart of a statement."

(DWARF version 4 spec 6.2.2)

So, non-statement line info also should be skipped.

These can reduce unneeded probe points and also avoid an error.

E.g. without this patch:

# perf probe -a "clear_tasks_mm_cpumask:1" Added new events: probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask:1) probe:clear_tasks_mm_cpumask_1 (on clear_tasks_mm_cpumask:1) probe:clear_tasks_mm_cpumask_2 (on clear_tasks_mm_cpumask:1) probe:clear_tasks_mm_cpumask_3 (on clear_tasks_mm_cpumask:1) probe:clear_tasks_mm_cpumask_4 (on clear_tasks_mm_cpumask:1)

You can now use it in all perf tools, such as:

perf record -e probe:clear_tasks_mm_cpumask_4 -aR sleep 1

#

This puts 5 probes on one line, but acutally it's not inlined function. This is because there are many non statement instructions at the function prologue.

With this patch:

# perf probe -a "clear_tasks_mm_cpumask:1" Added new event: probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask:1)

You can now use it in all perf tools, such as:

perf record -e probe:clear_tasks_mm_cpumask -aR sleep 1

#

Now perf-probe skips unneeded addresses.

Committer testing:

Slightly different results, but similar:

Before:

# uname -a Linux quaco 5.3.8-200.fc30.x86_64 #1 SMP Tue Oct 29 14:46:22 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux # # perf probe -a "clear_tasks_mm_cpumask:1" Added new events: probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask:1) probe:clear_tasks_mm_cpumask_1 (on clear_tasks_mm_cpumask:1) probe:clear_tasks_mm_cpumask_2 (on clear_tasks_mm_cpumask:1)

You can now use it in all perf tools, such as:

perf record -e probe:clear_tasks_mm_cpumask_2 -aR sleep 1

#

After:

# perf probe -a "clear_tasks_mm_cpumask:1" Added new event: probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask:1)

You can now use it in all perf tools, such as:

perf record -e probe:clear_tasks_mm_cpumask -aR sleep 1

# perf probe -l probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask@kernel/cpu.c) #

Fixes: 4cc9cec636e7 ("perf probe: Introduce lines walker interface") Signed-off-by: Masami Hiramatsu mhiramat@kernel.org Tested-by: Arnaldo Carvalho de Melo acme@redhat.com Cc: Jiri Olsa jolsa@redhat.com Cc: Namhyung Kim namhyung@kernel.org Link: http://lore.kernel.org/lkml/157241936090.32002.12156347518596111660.stgit@de... Signed-off-by: Arnaldo Carvalho de Melo acme@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- tools/perf/util/dwarf-aux.c | 7 +++++++ 1 file changed, 7 insertions(+)

diff --git a/tools/perf/util/dwarf-aux.c b/tools/perf/util/dwarf-aux.c index 7ae3106b4e5e0..65a782864bb8f 100644 --- a/tools/perf/util/dwarf-aux.c +++ b/tools/perf/util/dwarf-aux.c @@ -773,6 +773,7 @@ int die_walk_lines(Dwarf_Die *rt_die, line_walk_callback_t callback, void *data) int decl = 0, inl; Dwarf_Die die_mem, *cu_die; size_t nlines, i; + bool flag;

/* Get the CU die */ if (dwarf_tag(rt_die) != DW_TAG_compile_unit) { @@ -803,6 +804,12 @@ int die_walk_lines(Dwarf_Die *rt_die, line_walk_callback_t callback, void *data) "Possible error in debuginfo.\n"); continue; } + /* Skip end-of-sequence */ + if (dwarf_lineendsequence(line, &flag) != 0 || flag) + continue; + /* Skip Non statement line-info */ + if (dwarf_linebeginstatement(line, &flag) != 0 || !flag) + continue; /* Filter lines based on address */ if (rt_die != cu_die) { /*

From: Miaoqing Pan miaoqing@codeaurora.org

[ Upstream commit 05a11003a56507023f18d3249a4d4d119c0a3e9c ]

ath10k does not provide transmit rate info per MSDU in tx completion, mark that as -1 so mac80211 will ignore the rates. This fixes mac80211 update Mesh link metric with invalid transmit rate info.

Tested HW: QCA9984 Tested FW: 10.4-3.9.0.2-00035

Signed-off-by: Hou Bao Hou houbao@codeaurora.org Signed-off-by: Anilkumar Kolli akolli@codeaurora.org Signed-off-by: Miaoqing Pan miaoqing@codeaurora.org Signed-off-by: Kalle Valo kvalo@codeaurora.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/ath/ath10k/txrx.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/txrx.c b/drivers/net/wireless/ath/ath10k/txrx.c index 6f62ddc0494c3..6c47e4b6aa6cd 100644 --- a/drivers/net/wireless/ath/ath10k/txrx.c +++ b/drivers/net/wireless/ath/ath10k/txrx.c @@ -101,6 +101,8 @@ int ath10k_txrx_tx_unref(struct ath10k_htt *htt,

info = IEEE80211_SKB_CB(msdu); memset(&info->status, 0, sizeof(info->status)); + info->status.rates[0].idx = -1; + trace_ath10k_txrx_tx_unref(ar, tx_done->msdu_id);

if (!(info->flags & IEEE80211_TX_CTL_NO_ACK))

From: Mike Isely isely@pobox.com

[ Upstream commit 7f404ae9cf2a285f73b3c18ab9303d54b7a3d8e1 ]

In some device configurations there's no radio or radio support in the driver. That's OK, as the driver sets itself up accordingly. However on tear-down in these caes it's still trying to tear down radio related context when there isn't anything there, leading to dereferences through a null pointer and chaos follows.

How this bug survived unfixed for 11 years in the pvrusb2 driver is a mystery to me.

[hverkuil: fix two checkpatch warnings]

Signed-off-by: Mike Isely isely@pobox.com Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Mauro Carvalho Chehab mchehab@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/usb/pvrusb2/pvrusb2-v4l2.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/media/usb/pvrusb2/pvrusb2-v4l2.c b/drivers/media/usb/pvrusb2/pvrusb2-v4l2.c index e53a80b589a15..04d334152eae2 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-v4l2.c +++ b/drivers/media/usb/pvrusb2/pvrusb2-v4l2.c @@ -916,8 +916,12 @@ static void pvr2_v4l2_internal_check(struct pvr2_channel *chp) pvr2_v4l2_dev_disassociate_parent(vp->dev_video); pvr2_v4l2_dev_disassociate_parent(vp->dev_radio); if (!list_empty(&vp->dev_video->devbase.fh_list) || - !list_empty(&vp->dev_radio->devbase.fh_list)) + (vp->dev_radio && + !list_empty(&vp->dev_radio->devbase.fh_list))) { + pvr2_trace(PVR2_TRACE_STRUCT, + "pvr2_v4l2 internal_check exit-empty id=%p", vp); return; + } pvr2_v4l2_destroy_no_lock(vp); }

@@ -953,7 +957,8 @@ static int pvr2_v4l2_release(struct file *file) kfree(fhp); if (vp->channel.mc_head->disconnect_flag && list_empty(&vp->dev_video->devbase.fh_list) && - list_empty(&vp->dev_radio->devbase.fh_list)) { + (!vp->dev_radio || + list_empty(&vp->dev_radio->devbase.fh_list))) { pvr2_v4l2_destroy_no_lock(vp); } return 0;

From: Herbert Xu herbert@gondor.apana.org.au

[ Upstream commit 1520c72596dde7f22b8bd6bed3ef7df2b8b7ef39 ]

As it is if CONFIG_CRYPTO_DEV_ATMEL_AUTHENC is set to m it is in effect disabled. This patch fixes it by using IS_ENABLED instead of ifdef.

Fixes: 89a82ef87e01 ("crypto: atmel-authenc - add support to...") Signed-off-by: Herbert Xu herbert@gondor.apana.org.au Reviewed-by: Tudor Ambarus tudor.ambarus@microchip.com Signed-off-by: Herbert Xu herbert@gondor.apana.org.au Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/crypto/atmel-aes.c | 18 +++++++++--------- drivers/crypto/atmel-authenc.h | 2 +- drivers/crypto/atmel-sha.c | 2 +- 3 files changed, 11 insertions(+), 11 deletions(-)

diff --git a/drivers/crypto/atmel-aes.c b/drivers/crypto/atmel-aes.c index 801aeab5ab1e6..e659c3d9c2e4f 100644 --- a/drivers/crypto/atmel-aes.c +++ b/drivers/crypto/atmel-aes.c @@ -148,7 +148,7 @@ struct atmel_aes_xts_ctx { u32 key2[AES_KEYSIZE_256 / sizeof(u32)]; };

-#ifdef CONFIG_CRYPTO_DEV_ATMEL_AUTHENC +#if IS_ENABLED(CONFIG_CRYPTO_DEV_ATMEL_AUTHENC) struct atmel_aes_authenc_ctx { struct atmel_aes_base_ctx base; struct atmel_sha_authenc_ctx *auth; @@ -160,7 +160,7 @@ struct atmel_aes_reqctx { u32 lastc[AES_BLOCK_SIZE / sizeof(u32)]; };

-#ifdef CONFIG_CRYPTO_DEV_ATMEL_AUTHENC +#if IS_ENABLED(CONFIG_CRYPTO_DEV_ATMEL_AUTHENC) struct atmel_aes_authenc_reqctx { struct atmel_aes_reqctx base;

@@ -489,13 +489,13 @@ static inline bool atmel_aes_is_encrypt(const struct atmel_aes_dev *dd) return (dd->flags & AES_FLAGS_ENCRYPT); }

-#ifdef CONFIG_CRYPTO_DEV_ATMEL_AUTHENC +#if IS_ENABLED(CONFIG_CRYPTO_DEV_ATMEL_AUTHENC) static void atmel_aes_authenc_complete(struct atmel_aes_dev *dd, int err); #endif

static inline int atmel_aes_complete(struct atmel_aes_dev *dd, int err) { -#ifdef CONFIG_CRYPTO_DEV_ATMEL_AUTHENC +#if IS_ENABLED(CONFIG_CRYPTO_DEV_ATMEL_AUTHENC) if (dd->ctx->is_aead) atmel_aes_authenc_complete(dd, err); #endif @@ -1976,7 +1976,7 @@ static struct crypto_alg aes_xts_alg = { } };

-#ifdef CONFIG_CRYPTO_DEV_ATMEL_AUTHENC +#if IS_ENABLED(CONFIG_CRYPTO_DEV_ATMEL_AUTHENC) /* authenc aead functions */

static int atmel_aes_authenc_start(struct atmel_aes_dev *dd); @@ -2463,7 +2463,7 @@ static void atmel_aes_unregister_algs(struct atmel_aes_dev *dd) { int i;

-#ifdef CONFIG_CRYPTO_DEV_ATMEL_AUTHENC +#if IS_ENABLED(CONFIG_CRYPTO_DEV_ATMEL_AUTHENC) if (dd->caps.has_authenc) for (i = 0; i < ARRAY_SIZE(aes_authenc_algs); i++) crypto_unregister_aead(&aes_authenc_algs[i]); @@ -2510,7 +2510,7 @@ static int atmel_aes_register_algs(struct atmel_aes_dev *dd) goto err_aes_xts_alg; }

-#ifdef CONFIG_CRYPTO_DEV_ATMEL_AUTHENC +#if IS_ENABLED(CONFIG_CRYPTO_DEV_ATMEL_AUTHENC) if (dd->caps.has_authenc) { for (i = 0; i < ARRAY_SIZE(aes_authenc_algs); i++) { err = crypto_register_aead(&aes_authenc_algs[i]); @@ -2522,7 +2522,7 @@ static int atmel_aes_register_algs(struct atmel_aes_dev *dd)

return 0;

-#ifdef CONFIG_CRYPTO_DEV_ATMEL_AUTHENC +#if IS_ENABLED(CONFIG_CRYPTO_DEV_ATMEL_AUTHENC) /* i = ARRAY_SIZE(aes_authenc_algs); */ err_aes_authenc_alg: for (j = 0; j < i; j++) @@ -2713,7 +2713,7 @@ static int atmel_aes_probe(struct platform_device *pdev)

atmel_aes_get_cap(aes_dd);

-#ifdef CONFIG_CRYPTO_DEV_ATMEL_AUTHENC +#if IS_ENABLED(CONFIG_CRYPTO_DEV_ATMEL_AUTHENC) if (aes_dd->caps.has_authenc && !atmel_sha_authenc_is_ready()) { err = -EPROBE_DEFER; goto iclk_unprepare; diff --git a/drivers/crypto/atmel-authenc.h b/drivers/crypto/atmel-authenc.h index 2a60d1224143a..7f6742d35dd5a 100644 --- a/drivers/crypto/atmel-authenc.h +++ b/drivers/crypto/atmel-authenc.h @@ -23,7 +23,7 @@ #ifndef __ATMEL_AUTHENC_H__ #define __ATMEL_AUTHENC_H__

-#ifdef CONFIG_CRYPTO_DEV_ATMEL_AUTHENC +#if IS_ENABLED(CONFIG_CRYPTO_DEV_ATMEL_AUTHENC)

#include <crypto/authenc.h> #include <crypto/hash.h> diff --git a/drivers/crypto/atmel-sha.c b/drivers/crypto/atmel-sha.c index 8a19df2fba6a3..ef125d4be8fc4 100644 --- a/drivers/crypto/atmel-sha.c +++ b/drivers/crypto/atmel-sha.c @@ -2215,7 +2215,7 @@ static struct ahash_alg sha_hmac_algs[] = { }, };

-#ifdef CONFIG_CRYPTO_DEV_ATMEL_AUTHENC +#if IS_ENABLED(CONFIG_CRYPTO_DEV_ATMEL_AUTHENC) /* authenc functions */

static int atmel_sha_authenc_init2(struct atmel_sha_dev *dd);

From: Chuhong Yuan hslester96@gmail.com

[ Upstream commit 2df200ab234a86836a8879a05a8007d6b884eb14 ]

The driver misses calling v4l2_ctrl_handler_free and v4l2_device_unregister in remove like what is done in probe failure. Add the calls to fix it.

Signed-off-by: Chuhong Yuan hslester96@gmail.com Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Mauro Carvalho Chehab mchehab@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/radio/si470x/radio-si470x-i2c.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/drivers/media/radio/si470x/radio-si470x-i2c.c b/drivers/media/radio/si470x/radio-si470x-i2c.c index e3b3ecd14a4dd..ae7540b765e1d 100644 --- a/drivers/media/radio/si470x/radio-si470x-i2c.c +++ b/drivers/media/radio/si470x/radio-si470x-i2c.c @@ -485,6 +485,8 @@ static int si470x_i2c_remove(struct i2c_client *client) video_unregister_device(&radio->videodev); kfree(radio);

+ v4l2_ctrl_handler_free(&radio->hdl); + v4l2_device_unregister(&radio->v4l2_dev); return 0; }

From: Chuhong Yuan hslester96@gmail.com

[ Upstream commit 5eb263ef08b5014cfc2539a838f39d2fd3531423 ]

pxa2xx_spi_init_pdata misses checks for devm_clk_get and platform_get_irq. Add checks for them to fix the bugs.

Since ssp->clk and ssp->irq are used in probe, they are mandatory here. So we cannot use _optional() for devm_clk_get and platform_get_irq.

Signed-off-by: Chuhong Yuan hslester96@gmail.com Link: https://lore.kernel.org/r/20191109080943.30428-1-hslester96@gmail.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi-pxa2xx.c | 6 ++++++ 1 file changed, 6 insertions(+)

diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index f41333817c501..525388126e260 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -1470,7 +1470,13 @@ pxa2xx_spi_init_pdata(struct platform_device *pdev) }

ssp->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(ssp->clk)) + return NULL; + ssp->irq = platform_get_irq(pdev, 0); + if (ssp->irq < 0) + return NULL; + ssp->type = type; ssp->pdev = pdev; ssp->port_id = pxa2xx_spi_get_port_id(adev);

From: Stefan Popa stefan.popa@analog.com

[ Upstream commit 6376cbe549fffb378403cee78efd26b8a2c8e450 ]

The AD5600 is a single channel, 16-bit resolution, voltage output digital to analog converter (DAC). The AD5600 uses a 3-wire SPI interface. It is part of the AD5541 family of DACs.

The ad5446 IIO driver implements support for some of these DACs (in the AD5441 family), so the change is a simple entry in this driver.

Link: https://www.analog.com/media/en/technical-documentation/data-sheets/AD5600.p...

Signed-off-by: Stefan Popa stefan.popa@analog.com Signed-off-by: Alexandru Ardelean alexandru.ardelean@analog.com Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/iio/dac/Kconfig | 4 ++-- drivers/iio/dac/ad5446.c | 6 ++++++ 2 files changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig index 80beb64e9e0c6..69f4cfa6494b5 100644 --- a/drivers/iio/dac/Kconfig +++ b/drivers/iio/dac/Kconfig @@ -59,8 +59,8 @@ config AD5446 help Say yes here to build support for Analog Devices AD5300, AD5301, AD5310, AD5311, AD5320, AD5321, AD5444, AD5446, AD5450, AD5451, AD5452, AD5453, - AD5512A, AD5541A, AD5542A, AD5543, AD5553, AD5601, AD5602, AD5611, AD5612, - AD5620, AD5621, AD5622, AD5640, AD5641, AD5660, AD5662 DACs + AD5512A, AD5541A, AD5542A, AD5543, AD5553, AD5600, AD5601, AD5602, AD5611, + AD5612, AD5620, AD5621, AD5622, AD5640, AD5641, AD5660, AD5662 DACs as well as Texas Instruments DAC081S101, DAC101S101, DAC121S101.

To compile this driver as a module, choose M here: the diff --git a/drivers/iio/dac/ad5446.c b/drivers/iio/dac/ad5446.c index fd26a4272fc5b..d3ce5def4f659 100644 --- a/drivers/iio/dac/ad5446.c +++ b/drivers/iio/dac/ad5446.c @@ -328,6 +328,7 @@ enum ad5446_supported_spi_device_ids { ID_AD5541A, ID_AD5512A, ID_AD5553, + ID_AD5600, ID_AD5601, ID_AD5611, ID_AD5621, @@ -382,6 +383,10 @@ static const struct ad5446_chip_info ad5446_spi_chip_info[] = { .channel = AD5446_CHANNEL(14, 16, 0), .write = ad5446_write, }, + [ID_AD5600] = { + .channel = AD5446_CHANNEL(16, 16, 0), + .write = ad5446_write, + }, [ID_AD5601] = { .channel = AD5446_CHANNEL_POWERDOWN(8, 16, 6), .write = ad5446_write, @@ -449,6 +454,7 @@ static const struct spi_device_id ad5446_spi_ids[] = { {"ad5542a", ID_AD5541A}, /* ad5541a and ad5542a are compatible */ {"ad5543", ID_AD5541A}, /* ad5541a and ad5543 are compatible */ {"ad5553", ID_AD5553}, + {"ad5600", ID_AD5600}, {"ad5601", ID_AD5601}, {"ad5611", ID_AD5611}, {"ad5621", ID_AD5621},

From: Ilya Leoshkevich iii@linux.ibm.com

[ Upstream commit 544f1d62e3e6c6e6d17a5e56f6139208acb5ff46 ]

Due to kptr_restrict, JITted BPF code is now displayed like this:

000000000b6ed1b2: ebdff0800024 stmg %r13,%r15,128(%r15) 000000004cde2ba0: 41d0f040 la %r13,64(%r15) 00000000fbad41b0: a7fbffa0 aghi %r15,-96

Leaking kernel addresses to dmesg is not a concern in this case, because this happens only when JIT debugging is explicitly activated, which only root can do.

Use %px in this particular instance, and also to print an instruction address in show_code and PCREL (e.g. brasl) arguments in print_insn. While at present functionally equivalent to %016lx, %px is recommended by Documentation/core-api/printk-formats.rst for such cases.

Signed-off-by: Ilya Leoshkevich iii@linux.ibm.com Reviewed-by: Vasily Gorbik gor@linux.ibm.com Signed-off-by: Vasily Gorbik gor@linux.ibm.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/s390/kernel/dis.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/arch/s390/kernel/dis.c b/arch/s390/kernel/dis.c index b2c68fbf26346..41925f2206940 100644 --- a/arch/s390/kernel/dis.c +++ b/arch/s390/kernel/dis.c @@ -462,10 +462,11 @@ static int print_insn(char *buffer, unsigned char *code, unsigned long addr) ptr += sprintf(ptr, "%%c%i", value); else if (operand->flags & OPERAND_VR) ptr += sprintf(ptr, "%%v%i", value); - else if (operand->flags & OPERAND_PCREL) - ptr += sprintf(ptr, "%lx", (signed int) value - + addr); - else if (operand->flags & OPERAND_SIGNED) + else if (operand->flags & OPERAND_PCREL) { + void *pcrel = (void *)((int)value + addr); + + ptr += sprintf(ptr, "%px", pcrel); + } else if (operand->flags & OPERAND_SIGNED) ptr += sprintf(ptr, "%i", value); else ptr += sprintf(ptr, "%u", value); @@ -537,7 +538,7 @@ void show_code(struct pt_regs *regs) else *ptr++ = ' '; addr = regs->psw.addr + start - 32; - ptr += sprintf(ptr, "%016lx: ", addr); + ptr += sprintf(ptr, "%px: ", (void *)addr); if (start + opsize >= end) break; for (i = 0; i < opsize; i++) @@ -565,7 +566,7 @@ void print_fn_code(unsigned char *code, unsigned long len) opsize = insn_length(*code); if (opsize > len) break; - ptr += sprintf(ptr, "%p: ", code); + ptr += sprintf(ptr, "%px: ", code); for (i = 0; i < opsize; i++) ptr += sprintf(ptr, "%02x", code[i]); *ptr++ = '\t';

From: Stefan Wahren wahrenst@gmx.net

[ Upstream commit da38802211cc3fd294211a642932edb09e3af632 ]

This adds the missing support for the PHY mode RGMII_RXID. It's necessary for the Raspberry Pi 4.

Signed-off-by: Stefan Wahren wahrenst@gmx.net Acked-by: Florian Fainelli f.fainelli@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/broadcom/genet/bcmmii.c | 5 +++++ 1 file changed, 5 insertions(+)

diff --git a/drivers/net/ethernet/broadcom/genet/bcmmii.c b/drivers/net/ethernet/broadcom/genet/bcmmii.c index a5049d637791d..10dcf8cb523f2 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmmii.c +++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c @@ -283,6 +283,11 @@ int bcmgenet_mii_config(struct net_device *dev, bool init) bcmgenet_sys_writel(priv, PORT_MODE_EXT_GPHY, SYS_PORT_CTRL); break; + + case PHY_INTERFACE_MODE_RGMII_RXID: + phy_name = "external RGMII (RX delay)"; + port_ctrl = PORT_MODE_EXT_GPHY; + break; default: dev_err(kdev, "unknown phy mode: %d\n", priv->phy_interface); return -EINVAL;

From: Coly Li colyli@suse.de

[ Upstream commit 2d8869518a525c9bce5f5268419df9dfbe3dfdeb ]

Commit cafe56359144 ("bcache: A block layer cache") leads to the following static checker warning:

./drivers/md/bcache/super.c:770 bcache_device_free() warn: variable dereferenced before check 'd->disk' (see line 766)

drivers/md/bcache/super.c 762 static void bcache_device_free(struct bcache_device *d) 763 { 764 lockdep_assert_held(&bch_register_lock); 765 766 pr_info("%s stopped", d->disk->disk_name); ^^^^^^^^^ Unchecked dereference.

767 768 if (d->c) 769 bcache_device_detach(d); 770 if (d->disk && d->disk->flags & GENHD_FL_UP) ^^^^^^^ Check too late.

771 del_gendisk(d->disk); 772 if (d->disk && d->disk->queue) 773 blk_cleanup_queue(d->disk->queue); 774 if (d->disk) { 775 ida_simple_remove(&bcache_device_idx, 776 first_minor_to_idx(d->disk->first_minor)); 777 put_disk(d->disk); 778 } 779

It is not 100% sure that the gendisk struct of bcache device will always be there, the warning makes sense when there is problem in block core.

This patch tries to remove the static checking warning by checking d->disk to avoid NULL pointer deferences.

Reported-by: Dan Carpenter dan.carpenter@oracle.com Signed-off-by: Coly Li colyli@suse.de Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/md/bcache/super.c | 24 ++++++++++++++++-------- 1 file changed, 16 insertions(+), 8 deletions(-)

diff --git a/drivers/md/bcache/super.c b/drivers/md/bcache/super.c index 14d381cc6d747..2d60bcdb5b9c1 100644 --- a/drivers/md/bcache/super.c +++ b/drivers/md/bcache/super.c @@ -747,20 +747,28 @@ static inline int idx_to_first_minor(int idx)

static void bcache_device_free(struct bcache_device *d) { + struct gendisk *disk = d->disk; + lockdep_assert_held(&bch_register_lock);

- pr_info("%s stopped", d->disk->disk_name); + if (disk) + pr_info("%s stopped", disk->disk_name); + else + pr_err("bcache device (NULL gendisk) stopped");

if (d->c) bcache_device_detach(d); - if (d->disk && d->disk->flags & GENHD_FL_UP) - del_gendisk(d->disk); - if (d->disk && d->disk->queue) - blk_cleanup_queue(d->disk->queue); - if (d->disk) { + + if (disk) { + if (disk->flags & GENHD_FL_UP) + del_gendisk(disk); + + if (disk->queue) + blk_cleanup_queue(disk->queue); + ida_simple_remove(&bcache_device_idx, - first_minor_to_idx(d->disk->first_minor)); - put_disk(d->disk); + first_minor_to_idx(disk->first_minor)); + put_disk(disk); }

bioset_exit(&d->bio_split);

From: Lianbo Jiang lijiang@redhat.com

[ Upstream commit 112eee5d06007dae561f14458bde7f2a4879ef4e ]

Add a forward declaration of struct kimage to the crash.h header because future changes will invoke a crash-specific function from the realmode init path and the compiler will complain otherwise like this:

In file included from arch/x86/realmode/init.c:11: ./arch/x86/include/asm/crash.h:5:32: warning: ‘struct kimage’ declared inside\ parameter list will not be visible outside of this definition or declaration 5 | int crash_load_segments(struct kimage *image); | ^~~~~~ ./arch/x86/include/asm/crash.h:6:37: warning: ‘struct kimage’ declared inside\ parameter list will not be visible outside of this definition or declaration 6 | int crash_copy_backup_region(struct kimage *image); | ^~~~~~ ./arch/x86/include/asm/crash.h:7:39: warning: ‘struct kimage’ declared inside\ parameter list will not be visible outside of this definition or declaration 7 | int crash_setup_memmap_entries(struct kimage *image, |

[ bp: Rewrite the commit message. ]

Reported-by: kbuild test robot lkp@intel.com Signed-off-by: Lianbo Jiang lijiang@redhat.com Signed-off-by: Borislav Petkov bp@suse.de Cc: bhe@redhat.com Cc: d.hatayama@fujitsu.com Cc: dhowells@redhat.com Cc: dyoung@redhat.com Cc: ebiederm@xmission.com Cc: horms@verge.net.au Cc: "H. Peter Anvin" hpa@zytor.com Cc: Ingo Molnar mingo@redhat.com Cc: Jürgen Gross jgross@suse.com Cc: kexec@lists.infradead.org Cc: Thomas Gleixner tglx@linutronix.de Cc: Tom Lendacky thomas.lendacky@amd.com Cc: vgoyal@redhat.com Cc: x86-ml x86@kernel.org Link: https://lkml.kernel.org/r/20191108090027.11082-4-lijiang@redhat.com Link: https://lkml.kernel.org/r/201910310233.EJRtTMWP%25lkp@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/include/asm/crash.h | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/arch/x86/include/asm/crash.h b/arch/x86/include/asm/crash.h index a7adb2bfbf0b8..6b8ad6fa3979a 100644 --- a/arch/x86/include/asm/crash.h +++ b/arch/x86/include/asm/crash.h @@ -2,6 +2,8 @@ #ifndef _ASM_X86_CRASH_H #define _ASM_X86_CRASH_H

+struct kimage; + int crash_load_segments(struct kimage *image); int crash_copy_backup_region(struct kimage *image); int crash_setup_memmap_entries(struct kimage *image,

From: Yuming Han yuming.han@unisoc.com

[ Upstream commit 6ee40511cb838f9ced002dff7131bca87e3ccbdd ]

Fail to allocate memory for tgid_map, because it requires order-6 page. detail as:

c3 sh: page allocation failure: order:6, mode:0x140c0c0(GFP_KERNEL), nodemask=(null) c3 sh cpuset=/ mems_allowed=0 c3 CPU: 3 PID: 5632 Comm: sh Tainted: G W O 4.14.133+ #10 c3 Hardware name: Generic DT based system c3 Backtrace: c3 [<c010bdbc>] (dump_backtrace) from [<c010c08c>](show_stack+0x18/0x1c) c3 [<c010c074>] (show_stack) from [<c0993c54>](dump_stack+0x84/0xa4) c3 [<c0993bd0>] (dump_stack) from [<c0229858>](warn_alloc+0xc4/0x19c) c3 [<c0229798>] (warn_alloc) from [<c022a6e4>](__alloc_pages_nodemask+0xd18/0xf28) c3 [<c02299cc>] (__alloc_pages_nodemask) from [<c0248344>](kmalloc_order+0x20/0x38) c3 [<c0248324>] (kmalloc_order) from [<c0248380>](kmalloc_order_trace+0x24/0x108) c3 [<c024835c>] (kmalloc_order_trace) from [<c01e6078>](set_tracer_flag+0xb0/0x158) c3 [<c01e5fc8>] (set_tracer_flag) from [<c01e6404>](trace_options_core_write+0x7c/0xcc) c3 [<c01e6388>] (trace_options_core_write) from [<c0278b1c>](__vfs_write+0x40/0x14c) c3 [<c0278adc>] (__vfs_write) from [<c0278e10>](vfs_write+0xc4/0x198) c3 [<c0278d4c>] (vfs_write) from [<c027906c>](SyS_write+0x6c/0xd0) c3 [<c0279000>] (SyS_write) from [<c01079a0>](ret_fast_syscall+0x0/0x54)

Switch to use kvcalloc to avoid unexpected allocation failures.

Link: http://lkml.kernel.org/r/1571888070-24425-1-git-send-email-chunyan.zhang@uni...

Signed-off-by: Yuming Han yuming.han@unisoc.com Signed-off-by: Chunyan Zhang chunyan.zhang@unisoc.com Signed-off-by: Steven Rostedt (VMware) rostedt@goodmis.org Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/trace/trace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index bdd7f3d78724e..b6ff2f84df174 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -4389,7 +4389,7 @@ int set_tracer_flag(struct trace_array *tr, unsigned int mask, int enabled)

if (mask == TRACE_ITER_RECORD_TGID) { if (!tgid_map) - tgid_map = kcalloc(PID_MAX_DEFAULT + 1, + tgid_map = kvcalloc(PID_MAX_DEFAULT + 1, sizeof(*tgid_map), GFP_KERNEL); if (!tgid_map) {

From: Andrea Righi andrea.righi@canonical.com

[ Upstream commit 84c529aea182939e68f618ed9813740c9165c7eb ]

bcache_allocator can call the following:

bch_allocator_thread() -> bch_prio_write() -> bch_bucket_alloc() -> wait on &ca->set->bucket_wait

But the wake up event on bucket_wait is supposed to come from bch_allocator_thread() itself => deadlock:

[ 1158.490744] INFO: task bcache_allocato:15861 blocked for more than 10 seconds. [ 1158.495929] Not tainted 5.3.0-050300rc3-generic #201908042232 [ 1158.500653] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1158.504413] bcache_allocato D 0 15861 2 0x80004000 [ 1158.504419] Call Trace: [ 1158.504429] __schedule+0x2a8/0x670 [ 1158.504432] schedule+0x2d/0x90 [ 1158.504448] bch_bucket_alloc+0xe5/0x370 [bcache] [ 1158.504453] ? wait_woken+0x80/0x80 [ 1158.504466] bch_prio_write+0x1dc/0x390 [bcache] [ 1158.504476] bch_allocator_thread+0x233/0x490 [bcache] [ 1158.504491] kthread+0x121/0x140 [ 1158.504503] ? invalidate_buckets+0x890/0x890 [bcache] [ 1158.504506] ? kthread_park+0xb0/0xb0 [ 1158.504510] ret_from_fork+0x35/0x40

Fix by making the call to bch_prio_write() non-blocking, so that bch_allocator_thread() never waits on itself.

Moreover, make sure to wake up the garbage collector thread when bch_prio_write() is failing to allocate buckets.

BugLink: https://bugs.launchpad.net/bugs/1784665 BugLink: https://bugs.launchpad.net/bugs/1796292 Signed-off-by: Andrea Righi andrea.righi@canonical.com Signed-off-by: Coly Li colyli@suse.de Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/md/bcache/alloc.c | 5 ++++- drivers/md/bcache/bcache.h | 2 +- drivers/md/bcache/super.c | 27 +++++++++++++++++++++------ 3 files changed, 26 insertions(+), 8 deletions(-)

diff --git a/drivers/md/bcache/alloc.c b/drivers/md/bcache/alloc.c index 9c3beb1e382b9..46794cac167e7 100644 --- a/drivers/md/bcache/alloc.c +++ b/drivers/md/bcache/alloc.c @@ -377,7 +377,10 @@ static int bch_allocator_thread(void *arg) if (!fifo_full(&ca->free_inc)) goto retry_invalidate;

- bch_prio_write(ca); + if (bch_prio_write(ca, false) < 0) { + ca->invalidate_needs_gc = 1; + wake_up_gc(ca->set); + } } } out: diff --git a/drivers/md/bcache/bcache.h b/drivers/md/bcache/bcache.h index 83f0b91aeb90d..4677b18ac2810 100644 --- a/drivers/md/bcache/bcache.h +++ b/drivers/md/bcache/bcache.h @@ -959,7 +959,7 @@ bool bch_cached_dev_error(struct cached_dev *dc); __printf(2, 3) bool bch_cache_set_error(struct cache_set *c, const char *fmt, ...);

-void bch_prio_write(struct cache *ca); +int bch_prio_write(struct cache *ca, bool wait); void bch_write_bdev_super(struct cached_dev *dc, struct closure *parent);

extern struct workqueue_struct *bcache_wq; diff --git a/drivers/md/bcache/super.c b/drivers/md/bcache/super.c index 2d60bcdb5b9c1..c45d9ad010770 100644 --- a/drivers/md/bcache/super.c +++ b/drivers/md/bcache/super.c @@ -525,12 +525,29 @@ static void prio_io(struct cache *ca, uint64_t bucket, int op, closure_sync(cl); }

-void bch_prio_write(struct cache *ca) +int bch_prio_write(struct cache *ca, bool wait) { int i; struct bucket *b; struct closure cl;

+ pr_debug("free_prio=%zu, free_none=%zu, free_inc=%zu", + fifo_used(&ca->free[RESERVE_PRIO]), + fifo_used(&ca->free[RESERVE_NONE]), + fifo_used(&ca->free_inc)); + + /* + * Pre-check if there are enough free buckets. In the non-blocking + * scenario it's better to fail early rather than starting to allocate + * buckets and do a cleanup later in case of failure. + */ + if (!wait) { + size_t avail = fifo_used(&ca->free[RESERVE_PRIO]) + + fifo_used(&ca->free[RESERVE_NONE]); + if (prio_buckets(ca) > avail) + return -ENOMEM; + } + closure_init_stack(&cl);

lockdep_assert_held(&ca->set->bucket_lock); @@ -540,9 +557,6 @@ void bch_prio_write(struct cache *ca) atomic_long_add(ca->sb.bucket_size * prio_buckets(ca), &ca->meta_sectors_written);

- //pr_debug("free %zu, free_inc %zu, unused %zu", fifo_used(&ca->free), - // fifo_used(&ca->free_inc), fifo_used(&ca->unused)); - for (i = prio_buckets(ca) - 1; i >= 0; --i) { long bucket; struct prio_set *p = ca->disk_buckets; @@ -560,7 +574,7 @@ void bch_prio_write(struct cache *ca) p->magic = pset_magic(&ca->sb); p->csum = bch_crc64(&p->magic, bucket_bytes(ca) - 8);

- bucket = bch_bucket_alloc(ca, RESERVE_PRIO, true); + bucket = bch_bucket_alloc(ca, RESERVE_PRIO, wait); BUG_ON(bucket == -1);

mutex_unlock(&ca->set->bucket_lock); @@ -589,6 +603,7 @@ void bch_prio_write(struct cache *ca)

ca->prio_last_buckets[i] = ca->prio_buckets[i]; } + return 0; }

static void prio_read(struct cache *ca, uint64_t bucket) @@ -1884,7 +1899,7 @@ static int run_cache_set(struct cache_set *c)

mutex_lock(&c->bucket_lock); for_each_cache(ca, c, i) - bch_prio_write(ca); + bch_prio_write(ca, true); mutex_unlock(&c->bucket_lock);

err = "cannot allocate new UUID bucket";

From: Michael Walle michael@walle.cc

[ Upstream commit e9149b8c00d25dbaef1aa174fc604bed207e576d ]

The current code assumes that the power is turned off in SND_SOC_BIAS_OFF. If there are no actual regulator the codec isn't turned off and the registers are not reset to their default values but the regcache is still marked as dirty. Thus a value might not be written to the hardware if it is set to the default value. Do a software reset before turning off the power to make sure the registers are always reset to their default states.

Signed-off-by: Michael Walle michael@walle.cc Acked-by: Charles Keepax ckeepax@opensource.cirrus.com Link: https://lore.kernel.org/r/20191112223629.21867-1-michael@walle.cc Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/wm8904.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/sound/soc/codecs/wm8904.c b/sound/soc/codecs/wm8904.c index 1965635ec07c7..d14e851b91605 100644 --- a/sound/soc/codecs/wm8904.c +++ b/sound/soc/codecs/wm8904.c @@ -1902,6 +1902,7 @@ static int wm8904_set_bias_level(struct snd_soc_component *component, snd_soc_component_update_bits(component, WM8904_BIAS_CONTROL_0, WM8904_BIAS_ENA, 0);

+ snd_soc_component_write(component, WM8904_SW_RESET_AND_ID, 0); regcache_cache_only(wm8904->regmap, true); regcache_mark_dirty(wm8904->regmap);

From: Petar Penkov ppenkov@google.com

[ Upstream commit c39e342a050a4425348e6fe7f75827c0a1a7ebc5 ]

There is a race in the TUN driver between napi_busy_loop and napi_gro_frags. This commit resolves the race by adding the NAPI struct via netif_tx_napi_add, instead of netif_napi_add, which disables polling for the NAPI struct.

KCSAN reported: BUG: KCSAN: data-race in gro_normal_list.part.0 / napi_busy_loop

write to 0xffff8880b5d474b0 of 4 bytes by task 11205 on cpu 0: gro_normal_list.part.0+0x77/0xb0 net/core/dev.c:5682 gro_normal_list net/core/dev.c:5678 [inline] gro_normal_one net/core/dev.c:5692 [inline] napi_frags_finish net/core/dev.c:5705 [inline] napi_gro_frags+0x625/0x770 net/core/dev.c:5778 tun_get_user+0x2150/0x26a0 drivers/net/tun.c:1976 tun_chr_write_iter+0x79/0xd0 drivers/net/tun.c:2022 call_write_iter include/linux/fs.h:1895 [inline] do_iter_readv_writev+0x487/0x5b0 fs/read_write.c:693 do_iter_write fs/read_write.c:970 [inline] do_iter_write+0x13b/0x3c0 fs/read_write.c:951 vfs_writev+0x118/0x1c0 fs/read_write.c:1015 do_writev+0xe3/0x250 fs/read_write.c:1058 __do_sys_writev fs/read_write.c:1131 [inline] __se_sys_writev fs/read_write.c:1128 [inline] __x64_sys_writev+0x4e/0x60 fs/read_write.c:1128 do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x44/0xa9

read to 0xffff8880b5d474b0 of 4 bytes by task 11168 on cpu 1: gro_normal_list net/core/dev.c:5678 [inline] napi_busy_loop+0xda/0x4f0 net/core/dev.c:6126 sk_busy_loop include/net/busy_poll.h:108 [inline] __skb_recv_udp+0x4ad/0x560 net/ipv4/udp.c:1689 udpv6_recvmsg+0x29e/0xe90 net/ipv6/udp.c:288 inet6_recvmsg+0xbb/0x240 net/ipv6/af_inet6.c:592 sock_recvmsg_nosec net/socket.c:871 [inline] sock_recvmsg net/socket.c:889 [inline] sock_recvmsg+0x92/0xb0 net/socket.c:885 sock_read_iter+0x15f/0x1e0 net/socket.c:967 call_read_iter include/linux/fs.h:1889 [inline] new_sync_read+0x389/0x4f0 fs/read_write.c:414 __vfs_read+0xb1/0xc0 fs/read_write.c:427 vfs_read fs/read_write.c:461 [inline] vfs_read+0x143/0x2c0 fs/read_write.c:446 ksys_read+0xd5/0x1b0 fs/read_write.c:587 __do_sys_read fs/read_write.c:597 [inline] __se_sys_read fs/read_write.c:595 [inline] __x64_sys_read+0x4c/0x60 fs/read_write.c:595 do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 11168 Comm: syz-executor.0 Not tainted 5.4.0-rc6+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Fixes: 943170998b20 ("tun: enable NAPI for TUN/TAP driver") Signed-off-by: Petar Penkov ppenkov@google.com Reported-by: syzbot syzkaller@googlegroups.com Reviewed-by: Eric Dumazet edumazet@google.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/tun.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/tun.c b/drivers/net/tun.c index e1ac1c57089ff..bbd92221c6ca4 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -319,8 +319,8 @@ static void tun_napi_init(struct tun_struct *tun, struct tun_file *tfile, tfile->napi_enabled = napi_en; tfile->napi_frags_enabled = napi_en && napi_frags; if (napi_en) { - netif_napi_add(tun->dev, &tfile->napi, tun_napi_poll, - NAPI_POLL_WEIGHT); + netif_tx_napi_add(tun->dev, &tfile->napi, tun_napi_poll, + NAPI_POLL_WEIGHT); napi_enable(&tfile->napi); } }

From: Eugeniu Rosca erosca@de.adit-jv.com

[ Upstream commit c91843463e9e821dc3b48fe37e3155fa38299f6e ]

Isolated initially to renesas_sdhi_internal_dmac [1], Ulf suggested adding MMC_CAP_ERASE to the TMIO mmc core:

On Fri, Nov 15, 2019 at 10:27:25AM +0100, Ulf Hansson wrote: -- snip -- This test and due to the discussions with Wolfram and you in this thread, I would actually suggest that you enable MMC_CAP_ERASE for all tmio variants, rather than just for this particular one.

In other words, set the cap in tmio_mmc_host_probe() should be fine, as it seems none of the tmio variants supports HW busy detection at this point. -- snip --

Testing on R-Car H3ULCB-KF doesn't reveal any issues (v5.4-rc7):

root@rcar-gen3:~# lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT mmcblk0 179:0 0 59.2G 0 disk <--- eMMC mmcblk0boot0 179:8 0 4M 1 disk mmcblk0boot1 179:16 0 4M 1 disk mmcblk1 179:24 0 30G 0 disk <--- SD card

root@rcar-gen3:~# time blkdiscard /dev/mmcblk0 real 0m8.659s user 0m0.001s sys 0m1.920s

root@rcar-gen3:~# time blkdiscard /dev/mmcblk1 real 0m1.176s user 0m0.001s sys 0m0.124s

[1] https://lore.kernel.org/linux-renesas-soc/20191112134808.23546-1-erosca@de.a...

Cc: Wolfram Sang wsa+renesas@sang-engineering.com Cc: Masahiro Yamada yamada.masahiro@socionext.com Cc: Andrew Gabbasov andrew_gabbasov@mentor.com Originally-by: Harish Jenny K N harish_kandiga@mentor.com Suggested-by: Ulf Hansson ulf.hansson@linaro.org Signed-off-by: Eugeniu Rosca erosca@de.adit-jv.com Reviewed-by: Wolfram Sang wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson ulf.hansson@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mmc/host/tmio_mmc_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mmc/host/tmio_mmc_core.c b/drivers/mmc/host/tmio_mmc_core.c index 35630ccbe9e5d..33c9ca8f14a97 100644 --- a/drivers/mmc/host/tmio_mmc_core.c +++ b/drivers/mmc/host/tmio_mmc_core.c @@ -1267,7 +1267,7 @@ int tmio_mmc_host_probe(struct tmio_mmc_host *_host) return ret; }

- mmc->caps |= MMC_CAP_4_BIT_DATA | pdata->capabilities; + mmc->caps |= MMC_CAP_ERASE | MMC_CAP_4_BIT_DATA | pdata->capabilities; mmc->caps2 |= pdata->capabilities2; mmc->max_segs = pdata->max_segs ? : 32; mmc->max_blk_size = 512;

From: Omar Sandoval osandov@fb.com

[ Upstream commit c495dcd6fbe1dce51811a76bb85b4675f6494938 ]

We hit the following very strange deadlock on a system with Btrfs on a loop device backed by another Btrfs filesystem:

1. The top (loop device) filesystem queues an async_cow work item from cow_file_range_async(). We'll call this work X. 2. Worker thread A starts work X (normal_work_helper()). 3. Worker thread A executes the ordered work for the top filesystem (run_ordered_work()). 4. Worker thread A finishes the ordered work for work X and frees X (work->ordered_free()). 5. Worker thread A executes another ordered work and gets blocked on I/O to the bottom filesystem (still in run_ordered_work()). 6. Meanwhile, the bottom filesystem allocates and queues an async_cow work item which happens to be the recently-freed X. 7. The workqueue code sees that X is already being executed by worker thread A, so it schedules X to be executed _after_ worker thread A finishes (see the find_worker_executing_work() call in process_one_work()).

Now, the top filesystem is waiting for I/O on the bottom filesystem, but the bottom filesystem is waiting for the top filesystem to finish, so we deadlock.

This happens because we are breaking the workqueue assumption that a work item cannot be recycled while it still depends on other work. Fix it by waiting to free the work item until we are done with all of the related ordered work.

P.S.:

One might ask why the workqueue code doesn't try to detect a recycled work item. It actually does try by checking whether the work item has the same work function (find_worker_executing_work()), but in our case the function is the same. This is the only key that the workqueue code has available to compare, short of adding an additional, layer-violating "custom key". Considering that we're the only ones that have ever hit this, we should just play by the rules.

Unfortunately, we haven't been able to create a minimal reproducer other than our full container setup using a compress-force=zstd filesystem on top of another compress-force=zstd filesystem.

Suggested-by: Tejun Heo tj@kernel.org Reviewed-by: Johannes Thumshirn jthumshirn@suse.de Signed-off-by: Omar Sandoval osandov@fb.com Reviewed-by: David Sterba dsterba@suse.com Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/btrfs/async-thread.c | 56 ++++++++++++++++++++++++++++++++--------- 1 file changed, 44 insertions(+), 12 deletions(-)

diff --git a/fs/btrfs/async-thread.c b/fs/btrfs/async-thread.c index d522494698fa4..02e4e903dfe9f 100644 --- a/fs/btrfs/async-thread.c +++ b/fs/btrfs/async-thread.c @@ -252,16 +252,17 @@ static inline void thresh_exec_hook(struct __btrfs_workqueue *wq) } }

-static void run_ordered_work(struct __btrfs_workqueue *wq) +static void run_ordered_work(struct __btrfs_workqueue *wq, + struct btrfs_work *self) { struct list_head *list = &wq->ordered_list; struct btrfs_work *work; spinlock_t *lock = &wq->list_lock; unsigned long flags; + void *wtag; + bool free_self = false;

while (1) { - void *wtag; - spin_lock_irqsave(lock, flags); if (list_empty(list)) break; @@ -287,16 +288,47 @@ static void run_ordered_work(struct __btrfs_workqueue *wq) list_del(&work->ordered_list); spin_unlock_irqrestore(lock, flags);

- /* - * We don't want to call the ordered free functions with the - * lock held though. Save the work as tag for the trace event, - * because the callback could free the structure. - */ - wtag = work; - work->ordered_free(work); - trace_btrfs_all_work_done(wq->fs_info, wtag); + if (work == self) { + /* + * This is the work item that the worker is currently + * executing. + * + * The kernel workqueue code guarantees non-reentrancy + * of work items. I.e., if a work item with the same + * address and work function is queued twice, the second + * execution is blocked until the first one finishes. A + * work item may be freed and recycled with the same + * work function; the workqueue code assumes that the + * original work item cannot depend on the recycled work + * item in that case (see find_worker_executing_work()). + * + * Note that the work of one Btrfs filesystem may depend + * on the work of another Btrfs filesystem via, e.g., a + * loop device. Therefore, we must not allow the current + * work item to be recycled until we are really done, + * otherwise we break the above assumption and can + * deadlock. + */ + free_self = true; + } else { + /* + * We don't want to call the ordered free functions with + * the lock held though. Save the work as tag for the + * trace event, because the callback could free the + * structure. + */ + wtag = work; + work->ordered_free(work); + trace_btrfs_all_work_done(wq->fs_info, wtag); + } } spin_unlock_irqrestore(lock, flags); + + if (free_self) { + wtag = self; + self->ordered_free(self); + trace_btrfs_all_work_done(wq->fs_info, wtag); + } }

static void normal_work_helper(struct btrfs_work *work) @@ -324,7 +356,7 @@ static void normal_work_helper(struct btrfs_work *work) work->func(work); if (need_order) { set_bit(WORK_DONE_BIT, &work->flags); - run_ordered_work(wq); + run_ordered_work(wq, work); } if (!need_order) trace_btrfs_all_work_done(wq->fs_info, wtag);

From: Chuhong Yuan hslester96@gmail.com

[ Upstream commit cd050abeba2a95fe5374eec28ad2244617bcbab6 ]

The driver forgets to call pm_runtime_disable in probe failure and remove. Add the missed calls to fix it.

Signed-off-by: Chuhong Yuan hslester96@gmail.com Link: https://lore.kernel.org/r/20191118024848.21645-1-hslester96@gmail.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi-st-ssc4.c | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/drivers/spi/spi-st-ssc4.c b/drivers/spi/spi-st-ssc4.c index a4e43fc19ece5..5df01ffdef468 100644 --- a/drivers/spi/spi-st-ssc4.c +++ b/drivers/spi/spi-st-ssc4.c @@ -385,6 +385,7 @@ static int spi_st_probe(struct platform_device *pdev) return 0;

clk_disable: + pm_runtime_disable(&pdev->dev); clk_disable_unprepare(spi_st->clk); put_master: spi_master_put(master); @@ -396,6 +397,8 @@ static int spi_st_remove(struct platform_device *pdev) struct spi_master *master = platform_get_drvdata(pdev); struct spi_st *spi_st = spi_master_get_devdata(master);

+ pm_runtime_disable(&pdev->dev); + clk_disable_unprepare(spi_st->clk);

pinctrl_pm_select_sleep_state(&pdev->dev);

From: Hans de Goede hdegoede@redhat.com

[ Upstream commit 0bb887709eb16bdc4b5baddd8337abf3de72917f ]

When the Acer Switch 10 SW5-012 quirk was added we did not have jack-detection support yet; and the builtin microphone selection of the original quirk is wrong too.

Fix the microphone-input quirk and add jack-detection info so that the internal-microphone and headphone/set jack on the Switch 10 work properly.

Signed-off-by: Hans de Goede hdegoede@redhat.com Reviewed-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Acked-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20191119145138.59162-1-hdegoede@redhat.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/intel/boards/bytcr_rt5640.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index b6dc524830b21..6acd5dd599dc4 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -414,10 +414,12 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { DMI_MATCH(DMI_SYS_VENDOR, "Acer"), DMI_MATCH(DMI_PRODUCT_NAME, "Aspire SW5-012"), }, - .driver_data = (void *)(BYT_RT5640_IN1_MAP | - BYT_RT5640_MCLK_EN | - BYT_RT5640_SSP0_AIF1), - + .driver_data = (void *)(BYT_RT5640_DMIC1_MAP | + BYT_RT5640_JD_SRC_JD2_IN4N | + BYT_RT5640_OVCD_TH_2000UA | + BYT_RT5640_OVCD_SF_0P75 | + BYT_RT5640_SSP0_AIF1 | + BYT_RT5640_MCLK_EN), }, { .matches = {

From: Rafał Miłecki rafal@milecki.pl

[ Upstream commit 4f61563da075bc8faefddfd5f8fc0cc14c49650a ]

This fixes a minor WARNING in the cfg80211: [ 130.658034] ------------[ cut here ]------------ [ 130.662805] WARNING: CPU: 1 PID: 610 at net/wireless/core.c:954 wiphy_unregister+0xb4/0x198 [cfg80211]

Signed-off-by: Rafał Miłecki rafal@milecki.pl Signed-off-by: Kalle Valo kvalo@codeaurora.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c | 5 +++++ 1 file changed, 5 insertions(+)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c index 0f56be13c7adf..584e05fdca6ad 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c @@ -1246,6 +1246,11 @@ void brcmf_detach(struct device *dev)

brcmf_proto_detach_pre_delif(drvr);

+ if (drvr->mon_if) { + brcmf_net_detach(drvr->mon_if->ndev, false); + drvr->mon_if = NULL; + } + /* make sure primary interface removed last */ for (i = BRCMF_MAX_IFS-1; i > -1; i--) brcmf_remove_interface(drvr->iflist[i], false);

From: Andy Shevchenko andriy.shevchenko@linux.intel.com

[ Upstream commit 21f585480deb4bcf0d92b08879c35d066dfee030 ]

New GCC warns about inappropriate use of strncpy():

drivers/staging/fbtft/fbtft-core.c: In function ‘fbtft_framebuffer_alloc’: drivers/staging/fbtft/fbtft-core.c:665:2: warning: ‘strncpy’ specified bound 16 equals destination size [-Wstringop-truncation] 665 | strncpy(info->fix.id, dev->driver->name, 16); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Later on the copy is being used with the assumption to be NULL terminated. Make sure string is NULL terminated by switching to snprintf().

Signed-off-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Link: https://lore.kernel.org/r/20191120095716.26628-1-andriy.shevchenko@linux.int... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/staging/fbtft/fbtft-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/staging/fbtft/fbtft-core.c b/drivers/staging/fbtft/fbtft-core.c index 16fcf633e60f8..3fe4738720eab 100644 --- a/drivers/staging/fbtft/fbtft-core.c +++ b/drivers/staging/fbtft/fbtft-core.c @@ -771,7 +771,7 @@ struct fb_info *fbtft_framebuffer_alloc(struct fbtft_display *display, fbdefio->deferred_io = fbtft_deferred_io; fb_deferred_io_init(info);

- strncpy(info->fix.id, dev->driver->name, 16); + snprintf(info->fix.id, sizeof(info->fix.id), "%s", dev->driver->name); info->fix.type = FB_TYPE_PACKED_PIXELS; info->fix.visual = FB_VISUAL_TRUECOLOR; info->fix.xpanstep = 0;

From: Kusanagi Kouichi slash@ac.auone-net.jp

[ Upstream commit 4250b047039d324e0ff65267c8beb5bad5052a86 ]

If DEBUG_FS=n, compile fails with the following error:

kernel/trace/trace.c: In function 'tracing_init_dentry': kernel/trace/trace.c:8658:9: error: passing argument 3 of 'debugfs_create_automount' from incompatible pointer type [-Werror=incompatible-pointer-types] 8658 | trace_automount, NULL); | ^~~~~~~~~~~~~~~ | | | struct vfsmount * (*)(struct dentry *, void *) In file included from kernel/trace/trace.c:24: ./include/linux/debugfs.h:206:25: note: expected 'struct vfsmount * (*)(void *)' but argument is of type 'struct vfsmount * (*)(struct dentry *, void *)' 206 | struct vfsmount *(*f)(void *), | ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~

Signed-off-by: Kusanagi Kouichi slash@ac.auone-net.jp Link: https://lore.kernel.org/r/20191121102021787.MLMY.25002.ppp.dion.ne.jp@dmta00... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- include/linux/debugfs.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/include/linux/debugfs.h b/include/linux/debugfs.h index 3b0ba54cc4d5b..3bc1034c57e66 100644 --- a/include/linux/debugfs.h +++ b/include/linux/debugfs.h @@ -54,6 +54,8 @@ static const struct file_operations __fops = { \ .llseek = no_llseek, \ }

+typedef struct vfsmount *(*debugfs_automount_t)(struct dentry *, void *); + #if defined(CONFIG_DEBUG_FS)

struct dentry *debugfs_lookup(const char *name, struct dentry *parent); @@ -75,7 +77,6 @@ struct dentry *debugfs_create_dir(const char *name, struct dentry *parent); struct dentry *debugfs_create_symlink(const char *name, struct dentry *parent, const char *dest);

-typedef struct vfsmount *(*debugfs_automount_t)(struct dentry *, void *); struct dentry *debugfs_create_automount(const char *name, struct dentry *parent, debugfs_automount_t f, @@ -204,7 +205,7 @@ static inline struct dentry *debugfs_create_symlink(const char *name,

static inline struct dentry *debugfs_create_automount(const char *name, struct dentry *parent, - struct vfsmount *(*f)(void *), + debugfs_automount_t f, void *data) { return ERR_PTR(-ENODEV);