Fix UBSAN warnings that occur when using a system with 32 physical cpu cores or more, or when the user defines a number of ethernet queues greater than or equal to FP_SB_MAX_E1x.
The value of the maximum number of Ethernet queues should be limited to FP_SB_MAX_E1x in case FCOE is disabled or to [FP_SB_MAX_E1x-1] if enabled to avoid out of bounds reads and writes.
Stack trace:
UBSAN: array-index-out-of-bounds in /home/kernel/COD/linux/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c:1529:11 index 20 is out of range for type 'stats_query_entry [19]' CPU: 12 PID: 858 Comm: systemd-network Not tainted 6.9.0-060900rc7-generic #202405052133 Hardware name: HP ProLiant DL360 Gen9/ProLiant DL360 Gen9, BIOS P89 10/21/2019 Call Trace: <TASK> dump_stack_lvl+0x76/0xa0 dump_stack+0x10/0x20 __ubsan_handle_out_of_bounds+0xcb/0x110 bnx2x_prep_fw_stats_req+0x2e1/0x310 [bnx2x] bnx2x_stats_init+0x156/0x320 [bnx2x] bnx2x_post_irq_nic_init+0x81/0x1a0 [bnx2x] bnx2x_nic_load+0x8e8/0x19e0 [bnx2x] bnx2x_open+0x16b/0x290 [bnx2x] __dev_open+0x10e/0x1d0 __dev_change_flags+0x1bb/0x240 ? sock_def_readable+0x52/0xf0 dev_change_flags+0x27/0x80 do_setlink+0xab7/0xe50 ? rtnl_getlink+0x3c7/0x470 ? __nla_validate_parse+0x49/0x1d0 rtnl_setlink+0x12f/0x1f0 ? security_capable+0x47/0x80 rtnetlink_rcv_msg+0x170/0x440 ? ep_done_scan+0xe4/0x100 ? __pfx_rtnetlink_rcv_msg+0x10/0x10 netlink_rcv_skb+0x5d/0x110 rtnetlink_rcv+0x15/0x30 netlink_unicast+0x243/0x380 netlink_sendmsg+0x213/0x460 __sys_sendto+0x21e/0x230 __x64_sys_sendto+0x24/0x40 x64_sys_call+0x1c33/0x25c0 do_syscall_64+0x7e/0x180 ? __task_pid_nr_ns+0x6c/0xc0 ? syscall_exit_to_user_mode+0x81/0x270 ? do_syscall_64+0x8b/0x180 ? do_syscall_64+0x8b/0x180 ? __task_pid_nr_ns+0x6c/0xc0 ? syscall_exit_to_user_mode+0x81/0x270 ? do_syscall_64+0x8b/0x180 ? do_syscall_64+0x8b/0x180 ? exc_page_fault+0x93/0x1b0 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x736223927a0a Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89 RSP: 002b:00007ffc0bb2ada8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000583df50f9c78 RCX: 0000736223927a0a RDX: 0000000000000020 RSI: 0000583df50ee510 RDI: 0000000000000003 RBP: 0000583df50d4940 R08: 00007ffc0bb2adb0 R09: 0000000000000080 R10: 0000000000000000 R11: 0000000000000246 R12: 0000583df5103ae0 R13: 000000000000035a R14: 0000583df50f9c30 R15: 0000583ddddddf00 </TASK> ---[ end trace ]--- ------------[ cut here ]------------ UBSAN: array-index-out-of-bounds in /home/kernel/COD/linux/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c:1546:11 index 28 is out of range for type 'stats_query_entry [19]' CPU: 12 PID: 858 Comm: systemd-network Not tainted 6.9.0-060900rc7-generic #202405052133 Hardware name: HP ProLiant DL360 Gen9/ProLiant DL360 Gen9, BIOS P89 10/21/2019 Call Trace: <TASK> dump_stack_lvl+0x76/0xa0 dump_stack+0x10/0x20 __ubsan_handle_out_of_bounds+0xcb/0x110 bnx2x_prep_fw_stats_req+0x2fd/0x310 [bnx2x] bnx2x_stats_init+0x156/0x320 [bnx2x] bnx2x_post_irq_nic_init+0x81/0x1a0 [bnx2x] bnx2x_nic_load+0x8e8/0x19e0 [bnx2x] bnx2x_open+0x16b/0x290 [bnx2x] __dev_open+0x10e/0x1d0 __dev_change_flags+0x1bb/0x240 ? sock_def_readable+0x52/0xf0 dev_change_flags+0x27/0x80 do_setlink+0xab7/0xe50 ? rtnl_getlink+0x3c7/0x470 ? __nla_validate_parse+0x49/0x1d0 rtnl_setlink+0x12f/0x1f0 ? security_capable+0x47/0x80 rtnetlink_rcv_msg+0x170/0x440 ? ep_done_scan+0xe4/0x100 ? __pfx_rtnetlink_rcv_msg+0x10/0x10 netlink_rcv_skb+0x5d/0x110 rtnetlink_rcv+0x15/0x30 netlink_unicast+0x243/0x380 netlink_sendmsg+0x213/0x460 __sys_sendto+0x21e/0x230 __x64_sys_sendto+0x24/0x40 x64_sys_call+0x1c33/0x25c0 do_syscall_64+0x7e/0x180 ? __task_pid_nr_ns+0x6c/0xc0 ? syscall_exit_to_user_mode+0x81/0x270 ? do_syscall_64+0x8b/0x180 ? do_syscall_64+0x8b/0x180 ? __task_pid_nr_ns+0x6c/0xc0 ? syscall_exit_to_user_mode+0x81/0x270 ? do_syscall_64+0x8b/0x180 ? do_syscall_64+0x8b/0x180 ? exc_page_fault+0x93/0x1b0 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x736223927a0a Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89 RSP: 002b:00007ffc0bb2ada8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000583df50f9c78 RCX: 0000736223927a0a RDX: 0000000000000020 RSI: 0000583df50ee510 RDI: 0000000000000003 RBP: 0000583df50d4940 R08: 00007ffc0bb2adb0 R09: 0000000000000080 R10: 0000000000000000 R11: 0000000000000246 R12: 0000583df5103ae0 R13: 000000000000035a R14: 0000583df50f9c30 R15: 0000583ddddddf00 </TASK> ---[ end trace ]--- bnx2x 0000:04:00.1: 32.000 Gb/s available PCIe bandwidth (5.0 GT/s PCIe x8 link) bnx2x 0000:04:00.1 eno50: renamed from eth0 ------------[ cut here ]------------ UBSAN: array-index-out-of-bounds in /home/kernel/COD/linux/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:1895:8 index 29 is out of range for type 'stats_query_entry [19]' CPU: 13 PID: 163 Comm: kworker/u96:1 Not tainted 6.9.0-060900rc7-generic #202405052133 Hardware name: HP ProLiant DL360 Gen9/ProLiant DL360 Gen9, BIOS P89 10/21/2019 Workqueue: bnx2x bnx2x_sp_task [bnx2x] Call Trace: <TASK> dump_stack_lvl+0x76/0xa0 dump_stack+0x10/0x20 __ubsan_handle_out_of_bounds+0xcb/0x110 bnx2x_iov_adjust_stats_req+0x3c4/0x3d0 [bnx2x] bnx2x_storm_stats_post.part.0+0x4a/0x330 [bnx2x] ? bnx2x_hw_stats_post+0x231/0x250 [bnx2x] bnx2x_stats_start+0x44/0x70 [bnx2x] bnx2x_stats_handle+0x149/0x350 [bnx2x] bnx2x_attn_int_asserted+0x998/0x9b0 [bnx2x] bnx2x_sp_task+0x491/0x5c0 [bnx2x] process_one_work+0x18d/0x3f0 worker_thread+0x304/0x440 ? __pfx_worker_thread+0x10/0x10 kthread+0xe4/0x110 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x47/0x70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> ---[ end trace ]---
Fixes: 7d0445d66a76 ("bnx2x: clamp num_queues to prevent passing a negative value") Signed-off-by: Ghadi Elie Rahme ghadi.rahme@canonical.com --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index a8e07e51418f..837617b99089 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -66,7 +66,12 @@ static int bnx2x_calc_num_queues(struct bnx2x *bp) if (is_kdump_kernel()) nq = 1;
- nq = clamp(nq, 1, BNX2X_MAX_QUEUES(bp)); + int max_nq = FP_SB_MAX_E1x - 1; + + if(NO_FCOE(bp)) + max_nq = FP_SB_MAX_E1x; + + nq = clamp(nq, 1, max_nq); return nq; }
Hi,
Thanks for your patch.
FYI: kernel test robot notices the stable kernel rule is not satisfied.
The check is based on https://www.kernel.org/doc/html/latest/process/stable-kernel-rules.html#opti...
Rule: add the tag "Cc: stable@vger.kernel.org" in the sign-off area to have the patch automatically included in the stable tree. Subject: [PATCH net] bnx2x: Fix multiple UBSAN array-index-out-of-bounds Link: https://lore.kernel.org/stable/20240612135657.153658-1-ghadi.rahme%40canonic...
On Wed, Jun 12, 2024 at 04:56:57PM +0300, Ghadi Elie Rahme wrote:
Fix UBSAN warnings that occur when using a system with 32 physical cpu cores or more, or when the user defines a number of ethernet queues greater than or equal to FP_SB_MAX_E1x.
The value of the maximum number of Ethernet queues should be limited to FP_SB_MAX_E1x in case FCOE is disabled or to [FP_SB_MAX_E1x-1] if enabled to avoid out of bounds reads and writes.
Stack trace:
UBSAN: array-index-out-of-bounds in /home/kernel/COD/linux/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c:1529:11 index 20 is out of range for type 'stats_query_entry [19]' CPU: 12 PID: 858 Comm: systemd-network Not tainted 6.9.0-060900rc7-generic #202405052133 Hardware name: HP ProLiant DL360 Gen9/ProLiant DL360 Gen9, BIOS P89 10/21/2019 Call Trace:
<TASK> dump_stack_lvl+0x76/0xa0 dump_stack+0x10/0x20 __ubsan_handle_out_of_bounds+0xcb/0x110 bnx2x_prep_fw_stats_req+0x2e1/0x310 [bnx2x] bnx2x_stats_init+0x156/0x320 [bnx2x] bnx2x_post_irq_nic_init+0x81/0x1a0 [bnx2x] bnx2x_nic_load+0x8e8/0x19e0 [bnx2x] bnx2x_open+0x16b/0x290 [bnx2x] __dev_open+0x10e/0x1d0 __dev_change_flags+0x1bb/0x240 ? sock_def_readable+0x52/0xf0 dev_change_flags+0x27/0x80 do_setlink+0xab7/0xe50 ? rtnl_getlink+0x3c7/0x470 ? __nla_validate_parse+0x49/0x1d0 rtnl_setlink+0x12f/0x1f0 ? security_capable+0x47/0x80 rtnetlink_rcv_msg+0x170/0x440 ? ep_done_scan+0xe4/0x100 ? __pfx_rtnetlink_rcv_msg+0x10/0x10 netlink_rcv_skb+0x5d/0x110 rtnetlink_rcv+0x15/0x30 netlink_unicast+0x243/0x380 netlink_sendmsg+0x213/0x460 __sys_sendto+0x21e/0x230 __x64_sys_sendto+0x24/0x40 x64_sys_call+0x1c33/0x25c0 do_syscall_64+0x7e/0x180 ? __task_pid_nr_ns+0x6c/0xc0 ? syscall_exit_to_user_mode+0x81/0x270 ? do_syscall_64+0x8b/0x180 ? do_syscall_64+0x8b/0x180 ? __task_pid_nr_ns+0x6c/0xc0 ? syscall_exit_to_user_mode+0x81/0x270 ? do_syscall_64+0x8b/0x180 ? do_syscall_64+0x8b/0x180 ? exc_page_fault+0x93/0x1b0 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x736223927a0a Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89 RSP: 002b:00007ffc0bb2ada8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000583df50f9c78 RCX: 0000736223927a0a RDX: 0000000000000020 RSI: 0000583df50ee510 RDI: 0000000000000003 RBP: 0000583df50d4940 R08: 00007ffc0bb2adb0 R09: 0000000000000080 R10: 0000000000000000 R11: 0000000000000246 R12: 0000583df5103ae0 R13: 000000000000035a R14: 0000583df50f9c30 R15: 0000583ddddddf00 </TASK> ---[ end trace ]--- ------------[ cut here ]------------ UBSAN: array-index-out-of-bounds in /home/kernel/COD/linux/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c:1546:11 index 28 is out of range for type 'stats_query_entry [19]' CPU: 12 PID: 858 Comm: systemd-network Not tainted 6.9.0-060900rc7-generic #202405052133 Hardware name: HP ProLiant DL360 Gen9/ProLiant DL360 Gen9, BIOS P89 10/21/2019 Call Trace: <TASK> dump_stack_lvl+0x76/0xa0 dump_stack+0x10/0x20 __ubsan_handle_out_of_bounds+0xcb/0x110 bnx2x_prep_fw_stats_req+0x2fd/0x310 [bnx2x] bnx2x_stats_init+0x156/0x320 [bnx2x] bnx2x_post_irq_nic_init+0x81/0x1a0 [bnx2x] bnx2x_nic_load+0x8e8/0x19e0 [bnx2x] bnx2x_open+0x16b/0x290 [bnx2x] __dev_open+0x10e/0x1d0 __dev_change_flags+0x1bb/0x240 ? sock_def_readable+0x52/0xf0 dev_change_flags+0x27/0x80 do_setlink+0xab7/0xe50 ? rtnl_getlink+0x3c7/0x470 ? __nla_validate_parse+0x49/0x1d0 rtnl_setlink+0x12f/0x1f0 ? security_capable+0x47/0x80 rtnetlink_rcv_msg+0x170/0x440 ? ep_done_scan+0xe4/0x100 ? __pfx_rtnetlink_rcv_msg+0x10/0x10 netlink_rcv_skb+0x5d/0x110 rtnetlink_rcv+0x15/0x30 netlink_unicast+0x243/0x380 netlink_sendmsg+0x213/0x460 __sys_sendto+0x21e/0x230 __x64_sys_sendto+0x24/0x40 x64_sys_call+0x1c33/0x25c0 do_syscall_64+0x7e/0x180 ? __task_pid_nr_ns+0x6c/0xc0 ? syscall_exit_to_user_mode+0x81/0x270 ? do_syscall_64+0x8b/0x180 ? do_syscall_64+0x8b/0x180 ? __task_pid_nr_ns+0x6c/0xc0 ? syscall_exit_to_user_mode+0x81/0x270 ? do_syscall_64+0x8b/0x180 ? do_syscall_64+0x8b/0x180 ? exc_page_fault+0x93/0x1b0 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x736223927a0a Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89 RSP: 002b:00007ffc0bb2ada8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000583df50f9c78 RCX: 0000736223927a0a RDX: 0000000000000020 RSI: 0000583df50ee510 RDI: 0000000000000003 RBP: 0000583df50d4940 R08: 00007ffc0bb2adb0 R09: 0000000000000080 R10: 0000000000000000 R11: 0000000000000246 R12: 0000583df5103ae0 R13: 000000000000035a R14: 0000583df50f9c30 R15: 0000583ddddddf00 </TASK> ---[ end trace ]--- bnx2x 0000:04:00.1: 32.000 Gb/s available PCIe bandwidth (5.0 GT/s PCIe x8 link) bnx2x 0000:04:00.1 eno50: renamed from eth0 ------------[ cut here ]------------ UBSAN: array-index-out-of-bounds in /home/kernel/COD/linux/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:1895:8 index 29 is out of range for type 'stats_query_entry [19]' CPU: 13 PID: 163 Comm: kworker/u96:1 Not tainted 6.9.0-060900rc7-generic #202405052133 Hardware name: HP ProLiant DL360 Gen9/ProLiant DL360 Gen9, BIOS P89 10/21/2019 Workqueue: bnx2x bnx2x_sp_task [bnx2x] Call Trace: <TASK> dump_stack_lvl+0x76/0xa0 dump_stack+0x10/0x20 __ubsan_handle_out_of_bounds+0xcb/0x110 bnx2x_iov_adjust_stats_req+0x3c4/0x3d0 [bnx2x] bnx2x_storm_stats_post.part.0+0x4a/0x330 [bnx2x] ? bnx2x_hw_stats_post+0x231/0x250 [bnx2x] bnx2x_stats_start+0x44/0x70 [bnx2x] bnx2x_stats_handle+0x149/0x350 [bnx2x] bnx2x_attn_int_asserted+0x998/0x9b0 [bnx2x] bnx2x_sp_task+0x491/0x5c0 [bnx2x] process_one_work+0x18d/0x3f0 worker_thread+0x304/0x440 ? __pfx_worker_thread+0x10/0x10 kthread+0xe4/0x110 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x47/0x70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> ---[ end trace ]---
Fixes: 7d0445d66a76 ("bnx2x: clamp num_queues to prevent passing a negative value") Signed-off-by: Ghadi Elie Rahme ghadi.rahme@canonical.com
drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index a8e07e51418f..837617b99089 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -66,7 +66,12 @@ static int bnx2x_calc_num_queues(struct bnx2x *bp) if (is_kdump_kernel()) nq = 1;
- nq = clamp(nq, 1, BNX2X_MAX_QUEUES(bp));
- int max_nq = FP_SB_MAX_E1x - 1;
- if(NO_FCOE(bp))
max_nq = FP_SB_MAX_E1x;- nq = clamp(nq, 1, max_nq); return nq;
} -- 2.43.0
Did you not run checkpatch on this?
Also:
<formletter>
This is not the correct way to submit patches for inclusion in the stable kernel tree. Please read: https://www.kernel.org/doc/html/latest/process/stable-kernel-rules.html for how to do this properly.
</formletter>
Apologies, I accidentally sent an older version of the patch before checkpatch was ran and noticed it right after sending it. I will re-upload the proper version as soon as I am able to.
On 12/06/2024 17:06, Greg KH wrote:
On Wed, Jun 12, 2024 at 04:56:57PM +0300, Ghadi Elie Rahme wrote:
Fix UBSAN warnings that occur when using a system with 32 physical cpu cores or more, or when the user defines a number of ethernet queues greater than or equal to FP_SB_MAX_E1x.
The value of the maximum number of Ethernet queues should be limited to FP_SB_MAX_E1x in case FCOE is disabled or to [FP_SB_MAX_E1x-1] if enabled to avoid out of bounds reads and writes.
Stack trace:
UBSAN: array-index-out-of-bounds in /home/kernel/COD/linux/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c:1529:11 index 20 is out of range for type 'stats_query_entry [19]' CPU: 12 PID: 858 Comm: systemd-network Not tainted 6.9.0-060900rc7-generic #202405052133 Hardware name: HP ProLiant DL360 Gen9/ProLiant DL360 Gen9, BIOS P89 10/21/2019 Call Trace:
<TASK> dump_stack_lvl+0x76/0xa0 dump_stack+0x10/0x20 __ubsan_handle_out_of_bounds+0xcb/0x110 bnx2x_prep_fw_stats_req+0x2e1/0x310 [bnx2x] bnx2x_stats_init+0x156/0x320 [bnx2x] bnx2x_post_irq_nic_init+0x81/0x1a0 [bnx2x] bnx2x_nic_load+0x8e8/0x19e0 [bnx2x] bnx2x_open+0x16b/0x290 [bnx2x] __dev_open+0x10e/0x1d0 __dev_change_flags+0x1bb/0x240 ? sock_def_readable+0x52/0xf0 dev_change_flags+0x27/0x80 do_setlink+0xab7/0xe50 ? rtnl_getlink+0x3c7/0x470 ? __nla_validate_parse+0x49/0x1d0 rtnl_setlink+0x12f/0x1f0 ? security_capable+0x47/0x80 rtnetlink_rcv_msg+0x170/0x440 ? ep_done_scan+0xe4/0x100 ? __pfx_rtnetlink_rcv_msg+0x10/0x10 netlink_rcv_skb+0x5d/0x110 rtnetlink_rcv+0x15/0x30 netlink_unicast+0x243/0x380 netlink_sendmsg+0x213/0x460 __sys_sendto+0x21e/0x230 __x64_sys_sendto+0x24/0x40 x64_sys_call+0x1c33/0x25c0 do_syscall_64+0x7e/0x180 ? __task_pid_nr_ns+0x6c/0xc0 ? syscall_exit_to_user_mode+0x81/0x270 ? do_syscall_64+0x8b/0x180 ? do_syscall_64+0x8b/0x180 ? __task_pid_nr_ns+0x6c/0xc0 ? syscall_exit_to_user_mode+0x81/0x270 ? do_syscall_64+0x8b/0x180 ? do_syscall_64+0x8b/0x180 ? exc_page_fault+0x93/0x1b0 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x736223927a0a Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89 RSP: 002b:00007ffc0bb2ada8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000583df50f9c78 RCX: 0000736223927a0a RDX: 0000000000000020 RSI: 0000583df50ee510 RDI: 0000000000000003 RBP: 0000583df50d4940 R08: 00007ffc0bb2adb0 R09: 0000000000000080 R10: 0000000000000000 R11: 0000000000000246 R12: 0000583df5103ae0 R13: 000000000000035a R14: 0000583df50f9c30 R15: 0000583ddddddf00 </TASK> ---[ end trace ]--- ------------[ cut here ]------------ UBSAN: array-index-out-of-bounds in /home/kernel/COD/linux/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c:1546:11 index 28 is out of range for type 'stats_query_entry [19]' CPU: 12 PID: 858 Comm: systemd-network Not tainted 6.9.0-060900rc7-generic #202405052133 Hardware name: HP ProLiant DL360 Gen9/ProLiant DL360 Gen9, BIOS P89 10/21/2019 Call Trace: <TASK> dump_stack_lvl+0x76/0xa0 dump_stack+0x10/0x20 __ubsan_handle_out_of_bounds+0xcb/0x110 bnx2x_prep_fw_stats_req+0x2fd/0x310 [bnx2x] bnx2x_stats_init+0x156/0x320 [bnx2x] bnx2x_post_irq_nic_init+0x81/0x1a0 [bnx2x] bnx2x_nic_load+0x8e8/0x19e0 [bnx2x] bnx2x_open+0x16b/0x290 [bnx2x] __dev_open+0x10e/0x1d0 __dev_change_flags+0x1bb/0x240 ? sock_def_readable+0x52/0xf0 dev_change_flags+0x27/0x80 do_setlink+0xab7/0xe50 ? rtnl_getlink+0x3c7/0x470 ? __nla_validate_parse+0x49/0x1d0 rtnl_setlink+0x12f/0x1f0 ? security_capable+0x47/0x80 rtnetlink_rcv_msg+0x170/0x440 ? ep_done_scan+0xe4/0x100 ? __pfx_rtnetlink_rcv_msg+0x10/0x10 netlink_rcv_skb+0x5d/0x110 rtnetlink_rcv+0x15/0x30 netlink_unicast+0x243/0x380 netlink_sendmsg+0x213/0x460 __sys_sendto+0x21e/0x230 __x64_sys_sendto+0x24/0x40 x64_sys_call+0x1c33/0x25c0 do_syscall_64+0x7e/0x180 ? __task_pid_nr_ns+0x6c/0xc0 ? syscall_exit_to_user_mode+0x81/0x270 ? do_syscall_64+0x8b/0x180 ? do_syscall_64+0x8b/0x180 ? __task_pid_nr_ns+0x6c/0xc0 ? syscall_exit_to_user_mode+0x81/0x270 ? do_syscall_64+0x8b/0x180 ? do_syscall_64+0x8b/0x180 ? exc_page_fault+0x93/0x1b0 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x736223927a0a Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89 RSP: 002b:00007ffc0bb2ada8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000583df50f9c78 RCX: 0000736223927a0a RDX: 0000000000000020 RSI: 0000583df50ee510 RDI: 0000000000000003 RBP: 0000583df50d4940 R08: 00007ffc0bb2adb0 R09: 0000000000000080 R10: 0000000000000000 R11: 0000000000000246 R12: 0000583df5103ae0 R13: 000000000000035a R14: 0000583df50f9c30 R15: 0000583ddddddf00 </TASK> ---[ end trace ]--- bnx2x 0000:04:00.1: 32.000 Gb/s available PCIe bandwidth (5.0 GT/s PCIe x8 link) bnx2x 0000:04:00.1 eno50: renamed from eth0 ------------[ cut here ]------------ UBSAN: array-index-out-of-bounds in /home/kernel/COD/linux/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:1895:8 index 29 is out of range for type 'stats_query_entry [19]' CPU: 13 PID: 163 Comm: kworker/u96:1 Not tainted 6.9.0-060900rc7-generic #202405052133 Hardware name: HP ProLiant DL360 Gen9/ProLiant DL360 Gen9, BIOS P89 10/21/2019 Workqueue: bnx2x bnx2x_sp_task [bnx2x] Call Trace: <TASK> dump_stack_lvl+0x76/0xa0 dump_stack+0x10/0x20 __ubsan_handle_out_of_bounds+0xcb/0x110 bnx2x_iov_adjust_stats_req+0x3c4/0x3d0 [bnx2x] bnx2x_storm_stats_post.part.0+0x4a/0x330 [bnx2x] ? bnx2x_hw_stats_post+0x231/0x250 [bnx2x] bnx2x_stats_start+0x44/0x70 [bnx2x] bnx2x_stats_handle+0x149/0x350 [bnx2x] bnx2x_attn_int_asserted+0x998/0x9b0 [bnx2x] bnx2x_sp_task+0x491/0x5c0 [bnx2x] process_one_work+0x18d/0x3f0 worker_thread+0x304/0x440 ? __pfx_worker_thread+0x10/0x10 kthread+0xe4/0x110 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x47/0x70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> ---[ end trace ]---
Fixes: 7d0445d66a76 ("bnx2x: clamp num_queues to prevent passing a negative value") Signed-off-by: Ghadi Elie Rahme ghadi.rahme@canonical.com
drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index a8e07e51418f..837617b99089 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -66,7 +66,12 @@ static int bnx2x_calc_num_queues(struct bnx2x *bp) if (is_kdump_kernel()) nq = 1;
- nq = clamp(nq, 1, BNX2X_MAX_QUEUES(bp));
- int max_nq = FP_SB_MAX_E1x - 1;
- if(NO_FCOE(bp))
max_nq = FP_SB_MAX_E1x;- nq = clamp(nq, 1, max_nq); return nq; }
2.43.0
Did you not run checkpatch on this?
Also:
<formletter>
This is not the correct way to submit patches for inclusion in the stable kernel tree. Please read: https://www.kernel.org/doc/html/latest/process/stable-kernel-rules.html for how to do this properly.
</formletter>
linux-stable-mirror@lists.linaro.org
-
Ghadi Elie Rahme -
Ghadi Rahme
-
Greg KH -
kernel test robot