From: Yizhuo yzhai003@ucr.edu

[ Upstream commit 1252b283141f03c3dffd139292c862cae10e174d ]

In function pfuze100_regulator_probe(), variable "val" could be initialized if regmap_read() fails. However, "val" is used to decide the control flow later in the if statement, which is potentially unsafe.

Signed-off-by: Yizhuo yzhai003@ucr.edu Link: https://lore.kernel.org/r/20190929170957.14775-1-yzhai003@ucr.edu Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/regulator/pfuze100-regulator.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c index 86b348740fcdc..ffb1f61d2c752 100644 --- a/drivers/regulator/pfuze100-regulator.c +++ b/drivers/regulator/pfuze100-regulator.c @@ -608,7 +608,13 @@ static int pfuze100_regulator_probe(struct i2c_client *client,

/* SW2~SW4 high bit check and modify the voltage value table */ if (i >= sw_check_start && i <= sw_check_end) { - regmap_read(pfuze_chip->regmap, desc->vsel_reg, &val); + ret = regmap_read(pfuze_chip->regmap, + desc->vsel_reg, &val); + if (ret) { + dev_err(&client->dev, "Fails to read from the register.\n"); + return ret; + } + if (val & sw_hi) { if (pfuze_chip->chip_id == PFUZE3000) { desc->volt_table = pfuze3000_sw2hi;

From: Robin Murphy robin.murphy@arm.com

[ Upstream commit b1e620e7d32f5aad5353cc3cfc13ed99fea65d3a ]

If rockchip_pcm_platform_register() fails, e.g. upon deferring to wait for an absent DMA channel, we return without disabling RPM, which makes subsequent re-probe attempts scream with errors about the unbalanced enable. Don't do that.

Fixes: ebb75c0bdba2 ("ASoC: rockchip: i2s: Adjust devm usage") Signed-off-by: Robin Murphy robin.murphy@arm.com Link: https://lore.kernel.org/r/bcb12a849a05437fb18372bc7536c649b94bdf07.157002986... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/rockchip/rockchip_i2s.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/rockchip/rockchip_i2s.c b/sound/soc/rockchip/rockchip_i2s.c index 08bfee447a365..94b6f9c7dd6bb 100644 --- a/sound/soc/rockchip/rockchip_i2s.c +++ b/sound/soc/rockchip/rockchip_i2s.c @@ -649,7 +649,7 @@ static int rockchip_i2s_probe(struct platform_device *pdev) ret = devm_snd_dmaengine_pcm_register(&pdev->dev, NULL, 0); if (ret) { dev_err(&pdev->dev, "Could not register PCM\n"); - return ret; + goto err_suspend; }

return 0;

From: Dan Carpenter dan.carpenter@oracle.com

[ Upstream commit 39b65fbb813089e366b376bd8acc300b6fd646dc ]

The pinctrl->functions[] array has pinctrl->num_functions elements and the pinctrl->groups[] array is the same way. These are set in ns2_pinmux_probe(). So the > comparisons should be >= so that we don't read one element beyond the end of the array.

Fixes: b5aa1006e4a9 ("pinctrl: ns2: add pinmux driver support for Broadcom NS2 SoC") Signed-off-by: Dan Carpenter dan.carpenter@oracle.com Link: https://lore.kernel.org/r/20190926081426.GB2332@mwanda Acked-by: Scott Branden scott.branden@broadcom.com Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pinctrl/bcm/pinctrl-ns2-mux.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/pinctrl/bcm/pinctrl-ns2-mux.c b/drivers/pinctrl/bcm/pinctrl-ns2-mux.c index 13a4c27741572..6adfb379ac7e6 100644 --- a/drivers/pinctrl/bcm/pinctrl-ns2-mux.c +++ b/drivers/pinctrl/bcm/pinctrl-ns2-mux.c @@ -640,8 +640,8 @@ static int ns2_pinmux_enable(struct pinctrl_dev *pctrl_dev, const struct ns2_pin_function *func; const struct ns2_pin_group *grp;

- if (grp_select > pinctrl->num_groups || - func_select > pinctrl->num_functions) + if (grp_select >= pinctrl->num_groups || + func_select >= pinctrl->num_functions) return -EINVAL;

func = &pinctrl->functions[func_select];

From: Hannes Reinecke hare@suse.com

[ Upstream commit b6ce6fb121a655aefe41dccc077141c102145a37 ]

Some arrays are not capable of returning RTPG data during state transitioning, but rather return an 'LUN not accessible, asymmetric access state transition' sense code. In these cases we can set the state to 'transitioning' directly and don't need to evaluate the RTPG data (which we won't have anyway).

Link: https://lore.kernel.org/r/20191007135701.32389-1-hare@suse.de Reviewed-by: Laurence Oberman loberman@redhat.com Reviewed-by: Ewan D. Milne emilne@redhat.com Reviewed-by: Bart Van Assche bvanassche@acm.org Signed-off-by: Hannes Reinecke hare@suse.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/device_handler/scsi_dh_alua.c | 21 ++++++++++++++++----- 1 file changed, 16 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c index 98787588247bf..60c288526355a 100644 --- a/drivers/scsi/device_handler/scsi_dh_alua.c +++ b/drivers/scsi/device_handler/scsi_dh_alua.c @@ -527,6 +527,7 @@ static int alua_rtpg(struct scsi_device *sdev, struct alua_port_group *pg) unsigned int tpg_desc_tbl_off; unsigned char orig_transition_tmo; unsigned long flags; + bool transitioning_sense = false;

if (!pg->expiry) { unsigned long transition_tmo = ALUA_FAILOVER_TIMEOUT * HZ; @@ -571,13 +572,19 @@ static int alua_rtpg(struct scsi_device *sdev, struct alua_port_group *pg) goto retry; } /* - * Retry on ALUA state transition or if any - * UNIT ATTENTION occurred. + * If the array returns with 'ALUA state transition' + * sense code here it cannot return RTPG data during + * transition. So set the state to 'transitioning' directly. */ if (sense_hdr.sense_key == NOT_READY && - sense_hdr.asc == 0x04 && sense_hdr.ascq == 0x0a) - err = SCSI_DH_RETRY; - else if (sense_hdr.sense_key == UNIT_ATTENTION) + sense_hdr.asc == 0x04 && sense_hdr.ascq == 0x0a) { + transitioning_sense = true; + goto skip_rtpg; + } + /* + * Retry on any other UNIT ATTENTION occurred. + */ + if (sense_hdr.sense_key == UNIT_ATTENTION) err = SCSI_DH_RETRY; if (err == SCSI_DH_RETRY && pg->expiry != 0 && time_before(jiffies, pg->expiry)) { @@ -665,7 +672,11 @@ static int alua_rtpg(struct scsi_device *sdev, struct alua_port_group *pg) off = 8 + (desc[7] * 4); }

+ skip_rtpg: spin_lock_irqsave(&pg->lock, flags); + if (transitioning_sense) + pg->state = SCSI_ACCESS_STATE_TRANSITIONING; + sdev_printk(KERN_INFO, sdev, "%s: port group %02x state %c %s supports %c%c%c%c%c%c%c\n", ALUA_DH_NAME, pg->group_id, print_alua_state(pg->state),

From: Thomas Bogendoerfer tbogendoerfer@suse.de

[ Upstream commit 8cbf0c173aa096dda526d1ccd66fc751c31da346 ]

When building a kernel with SCSI_SNI_53C710 enabled, Kconfig warns:

WARNING: unmet direct dependencies detected for 53C700_LE_ON_BE Depends on [n]: SCSI_LOWLEVEL [=y] && SCSI [=y] && SCSI_LASI700 [=n] Selected by [y]: - SCSI_SNI_53C710 [=y] && SCSI_LOWLEVEL [=y] && SNI_RM [=y] && SCSI [=y]

Add the missing depends SCSI_SNI_53C710 to 53C700_LE_ON_BE to fix it.

Link: https://lore.kernel.org/r/20191009151128.32411-1-tbogendoerfer@suse.de Signed-off-by: Thomas Bogendoerfer tbogendoerfer@suse.de Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 17b1574920fd6..941e3f25b4a9f 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -986,7 +986,7 @@ config SCSI_SNI_53C710

config 53C700_LE_ON_BE bool - depends on SCSI_LASI700 + depends on SCSI_LASI700 || SCSI_SNI_53C710 default y

config SCSI_STEX

From: Yunfeng Ye yeyunfeng@huawei.com

[ Upstream commit 1abecfcaa7bba21c9985e0136fa49836164dd8fd ]

The memory @orig_flags is allocated by strdup(), it is freed on the normal path, but leak to free on the error path.

Fix this by adding free(orig_flags) on the error path.

Fixes: 0e11115644b3 ("perf kmem: Print gfp flags in human readable string") Signed-off-by: Yunfeng Ye yeyunfeng@huawei.com Cc: Alexander Shishkin alexander.shishkin@linux.intel.com Cc: Feilong Lin linfeilong@huawei.com Cc: Hu Shiyuan hushiyuan@huawei.com Cc: Jiri Olsa jolsa@redhat.com Cc: Mark Rutland mark.rutland@arm.com Cc: Namhyung Kim namhyung@kernel.org Cc: Peter Zijlstra peterz@infradead.org Link: http://lore.kernel.org/lkml/f9e9f458-96f3-4a97-a1d5-9feec2420e07@huawei.com Signed-off-by: Arnaldo Carvalho de Melo acme@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- tools/perf/builtin-kmem.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/tools/perf/builtin-kmem.c b/tools/perf/builtin-kmem.c index d426dcb18ce9a..496a4ca116671 100644 --- a/tools/perf/builtin-kmem.c +++ b/tools/perf/builtin-kmem.c @@ -674,6 +674,7 @@ static char *compact_gfp_flags(char *gfp_flags) new = realloc(new_flags, len + strlen(cpt) + 2); if (new == NULL) { free(new_flags); + free(orig_flags); return NULL; }

From: Bodo Stroesser bstroesser@ts.fujitsu.com

[ Upstream commit 27e84243cb63601a10e366afe3e2d05bb03c1cb5 ]

passthrough_parse_cdb() - used by TCMU and PSCSI - attepts to reset the LUN field of SCSI-2 CDBs (bits 5,6,7 of byte 1). The current code is wrong as for newer commands not having the LUN field it overwrites relevant command bits (e.g. for SECURITY PROTOCOL IN / OUT). We think this code was unnecessary from the beginning or at least it is no longer useful. So we remove it entirely.

Link: https://lore.kernel.org/r/12498eab-76fd-eaad-1316-c2827badb76a@ts.fujitsu.co... Signed-off-by: Bodo Stroesser bstroesser@ts.fujitsu.com Reviewed-by: Bart Van Assche bvanassche@acm.org Reviewed-by: Hannes Reinecke hare@suse.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/target/target_core_device.c | 21 --------------------- 1 file changed, 21 deletions(-)

diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c index cc38a3509f78c..c3d576ed6f135 100644 --- a/drivers/target/target_core_device.c +++ b/drivers/target/target_core_device.c @@ -1046,27 +1046,6 @@ passthrough_parse_cdb(struct se_cmd *cmd, { unsigned char *cdb = cmd->t_task_cdb;

- /* - * Clear a lun set in the cdb if the initiator talking to use spoke - * and old standards version, as we can't assume the underlying device - * won't choke up on it. - */ - switch (cdb[0]) { - case READ_10: /* SBC - RDProtect */ - case READ_12: /* SBC - RDProtect */ - case READ_16: /* SBC - RDProtect */ - case SEND_DIAGNOSTIC: /* SPC - SELF-TEST Code */ - case VERIFY: /* SBC - VRProtect */ - case VERIFY_16: /* SBC - VRProtect */ - case WRITE_VERIFY: /* SBC - VRProtect */ - case WRITE_VERIFY_12: /* SBC - VRProtect */ - case MAINTENANCE_IN: /* SPC - Parameter Data Format for SA RTPG */ - break; - default: - cdb[1] &= 0x1f; /* clear logical unit number */ - break; - } - /* * For REPORT LUNS we always need to emulate the response, for everything * else, pass it up.

From: Jonas Gorski jonas.gorski@gmail.com

[ Upstream commit e4f5cb1a9b27c0f94ef4f5a0178a3fde2d3d0e9e ]

The vectors span more than one byte, so mark them as arrays.

Fixes the following build error when building when using GCC 8.3:

In file included from ./include/linux/string.h:19, from ./include/linux/bitmap.h:9, from ./include/linux/cpumask.h:12, from ./arch/mips/include/asm/processor.h:15, from ./arch/mips/include/asm/thread_info.h:16, from ./include/linux/thread_info.h:38, from ./include/asm-generic/preempt.h:5, from ./arch/mips/include/generated/asm/preempt.h:1, from ./include/linux/preempt.h:81, from ./include/linux/spinlock.h:51, from ./include/linux/mmzone.h:8, from ./include/linux/bootmem.h:8, from arch/mips/bcm63xx/prom.c:10: arch/mips/bcm63xx/prom.c: In function 'prom_init': ./arch/mips/include/asm/string.h:162:11: error: '__builtin_memcpy' forming offset [2, 32] is out of the bounds [0, 1] of object 'bmips_smp_movevec' with type 'char' [-Werror=array-bounds] __ret = __builtin_memcpy((dst), (src), __len); \ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ arch/mips/bcm63xx/prom.c:97:3: note: in expansion of macro 'memcpy' memcpy((void *)0xa0000200, &bmips_smp_movevec, 0x20); ^~~~~~ In file included from arch/mips/bcm63xx/prom.c:14: ./arch/mips/include/asm/bmips.h:80:13: note: 'bmips_smp_movevec' declared here extern char bmips_smp_movevec;

Fixes: 18a1eef92dcd ("MIPS: BMIPS: Introduce bmips.h") Signed-off-by: Jonas Gorski jonas.gorski@gmail.com Reviewed-by: Florian Fainelli f.fainelli@gmail.com Signed-off-by: Paul Burton paulburton@kernel.org Cc: linux-mips@vger.kernel.org Cc: Ralf Baechle ralf@linux-mips.org Cc: James Hogan jhogan@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/mips/bcm63xx/prom.c | 2 +- arch/mips/include/asm/bmips.h | 10 +++++----- arch/mips/kernel/smp-bmips.c | 8 ++++---- 3 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/mips/bcm63xx/prom.c b/arch/mips/bcm63xx/prom.c index 7019e2967009e..bbbf8057565b2 100644 --- a/arch/mips/bcm63xx/prom.c +++ b/arch/mips/bcm63xx/prom.c @@ -84,7 +84,7 @@ void __init prom_init(void) * Here we will start up CPU1 in the background and ask it to * reconfigure itself then go back to sleep. */ - memcpy((void *)0xa0000200, &bmips_smp_movevec, 0x20); + memcpy((void *)0xa0000200, bmips_smp_movevec, 0x20); __sync(); set_c0_cause(C_SW0); cpumask_set_cpu(1, &bmips_booted_mask); diff --git a/arch/mips/include/asm/bmips.h b/arch/mips/include/asm/bmips.h index a92aee7b977ac..23f55af7d6bad 100644 --- a/arch/mips/include/asm/bmips.h +++ b/arch/mips/include/asm/bmips.h @@ -75,11 +75,11 @@ static inline int register_bmips_smp_ops(void) #endif }

-extern char bmips_reset_nmi_vec; -extern char bmips_reset_nmi_vec_end; -extern char bmips_smp_movevec; -extern char bmips_smp_int_vec; -extern char bmips_smp_int_vec_end; +extern char bmips_reset_nmi_vec[]; +extern char bmips_reset_nmi_vec_end[]; +extern char bmips_smp_movevec[]; +extern char bmips_smp_int_vec[]; +extern char bmips_smp_int_vec_end[];

extern int bmips_smp_enabled; extern int bmips_cpu_offset; diff --git a/arch/mips/kernel/smp-bmips.c b/arch/mips/kernel/smp-bmips.c index d4a293b68249b..416d53f587e7c 100644 --- a/arch/mips/kernel/smp-bmips.c +++ b/arch/mips/kernel/smp-bmips.c @@ -453,10 +453,10 @@ static void bmips_wr_vec(unsigned long dst, char *start, char *end)

static inline void bmips_nmi_handler_setup(void) { - bmips_wr_vec(BMIPS_NMI_RESET_VEC, &bmips_reset_nmi_vec, - &bmips_reset_nmi_vec_end); - bmips_wr_vec(BMIPS_WARM_RESTART_VEC, &bmips_smp_int_vec, - &bmips_smp_int_vec_end); + bmips_wr_vec(BMIPS_NMI_RESET_VEC, bmips_reset_nmi_vec, + bmips_reset_nmi_vec_end); + bmips_wr_vec(BMIPS_WARM_RESTART_VEC, bmips_smp_int_vec, + bmips_smp_int_vec_end); }

struct reset_vec_info {

From: Eric Dumazet edumazet@google.com

[ Upstream commit 3d1e5039f5f87a8731202ceca08764ee7cb010d3 ]

For some reason I missed the case of DCCP passive flows in my previous patch.

Fixes: a904a0693c18 ("inet: stop leaking jiffies on the wire") Signed-off-by: Eric Dumazet edumazet@google.com Reported-by: Thiemo Nagel tnagel@google.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/dccp/ipv4.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/dccp/ipv4.c +++ b/net/dccp/ipv4.c @@ -417,7 +417,7 @@ struct sock *dccp_v4_request_recv_sock(c RCU_INIT_POINTER(newinet->inet_opt, rcu_dereference(ireq->ireq_opt)); newinet->mc_index = inet_iif(skb); newinet->mc_ttl = ip_hdr(skb)->ttl; - newinet->inet_id = jiffies; + newinet->inet_id = prandom_u32();

if (dst == NULL && (dst = inet_csk_route_child_sock(sk, newsk, req)) == NULL) goto put_and_exit;

From: Jiangfeng Xiao xiaojiangfeng@huawei.com

[ Upstream commit e56bd641ca61beb92b135298d5046905f920b734 ]

This is due to error in over budget processing. When dealing with high throughput, the used buffers that exceeds the budget is not cleaned up. In addition, it takes a lot of cycles to clean up the used buffer, and then the buffer where the valid data is located can take effect.

Signed-off-by: Jiangfeng Xiao xiaojiangfeng@huawei.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/hisilicon/hip04_eth.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-)

--- a/drivers/net/ethernet/hisilicon/hip04_eth.c +++ b/drivers/net/ethernet/hisilicon/hip04_eth.c @@ -174,6 +174,7 @@ struct hip04_priv { dma_addr_t rx_phys[RX_DESC_NUM]; unsigned int rx_head; unsigned int rx_buf_size; + unsigned int rx_cnt_remaining;

struct device_node *phy_node; struct phy_device *phy; @@ -487,7 +488,6 @@ static int hip04_rx_poll(struct napi_str struct hip04_priv *priv = container_of(napi, struct hip04_priv, napi); struct net_device *ndev = priv->ndev; struct net_device_stats *stats = &ndev->stats; - unsigned int cnt = hip04_recv_cnt(priv); struct rx_desc *desc; struct sk_buff *skb; unsigned char *buf; @@ -500,8 +500,8 @@ static int hip04_rx_poll(struct napi_str

/* clean up tx descriptors */ tx_remaining = hip04_tx_reclaim(ndev, false); - - while (cnt && !last) { + priv->rx_cnt_remaining += hip04_recv_cnt(priv); + while (priv->rx_cnt_remaining && !last) { buf = priv->rx_buf[priv->rx_head]; skb = build_skb(buf, priv->rx_buf_size); if (unlikely(!skb)) { @@ -547,11 +547,13 @@ refill: hip04_set_recv_desc(priv, phys);

priv->rx_head = RX_NEXT(priv->rx_head); - if (rx >= budget) + if (rx >= budget) { + --priv->rx_cnt_remaining; goto done; + }

- if (--cnt == 0) - cnt = hip04_recv_cnt(priv); + if (--priv->rx_cnt_remaining == 0) + priv->rx_cnt_remaining += hip04_recv_cnt(priv); }

if (!(priv->reg_inten & RCV_INT)) { @@ -636,6 +638,7 @@ static int hip04_mac_open(struct net_dev int i;

priv->rx_head = 0; + priv->rx_cnt_remaining = 0; priv->tx_head = 0; priv->tx_tail = 0; hip04_reset_ppe(priv);

From: Wei Wang weiwan@google.com

[ Upstream commit d64479a3e3f9924074ca7b50bd72fa5211dca9c1 ]

This test reports EINVAL for getsockopt(SOL_SOCKET, SO_DOMAIN) occasionally due to the uninitialized length parameter. Initialize it to fix this, and also use int for "test_family" to comply with the API standard.

Fixes: d6a61f80b871 ("soreuseport: test mixed v4/v6 sockets") Reported-by: Maciej Żenczykowski maze@google.com Signed-off-by: Eric Dumazet edumazet@google.com Signed-off-by: Wei Wang weiwan@google.com Cc: Craig Gallek cgallek@google.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- tools/testing/selftests/net/reuseport_dualstack.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/tools/testing/selftests/net/reuseport_dualstack.c +++ b/tools/testing/selftests/net/reuseport_dualstack.c @@ -128,7 +128,7 @@ static void test(int *rcv_fds, int count { struct epoll_event ev; int epfd, i, test_fd; - uint16_t test_family; + int test_family; socklen_t len;

epfd = epoll_create(1); @@ -145,6 +145,7 @@ static void test(int *rcv_fds, int count send_from_v4(proto);

test_fd = receive_once(epfd, proto); + len = sizeof(test_family); if (getsockopt(test_fd, SOL_SOCKET, SO_DOMAIN, &test_family, &len)) error(1, errno, "failed to read socket domain"); if (test_family != AF_INET)

From: Vivien Didelot vivien.didelot@gmail.com

[ Upstream commit 50c7d2ba9de20f60a2d527ad6928209ef67e4cdd ]

If there are multiple switch trees on the device, only the last one will be listed, because the arguments of list_add_tail are swapped.

Fixes: 83c0afaec7b7 ("net: dsa: Add new binding implementation") Signed-off-by: Vivien Didelot vivien.didelot@gmail.com Reviewed-by: Florian Fainelli f.fainelli@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/dsa/dsa2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/dsa/dsa2.c +++ b/net/dsa/dsa2.c @@ -59,7 +59,7 @@ static struct dsa_switch_tree *dsa_add_d dst->tree = tree; dst->cpu_switch = -1; INIT_LIST_HEAD(&dst->list); - list_add_tail(&dsa_switch_trees, &dst->list); + list_add_tail(&dst->list, &dsa_switch_trees); kref_init(&dst->refcount);

return dst;

From: Xin Long lucien.xin@gmail.com

[ Upstream commit eadf52cf1852196a1363044dcda22fa5d7f296f7 ]

This patch is to improve the tun_info options_len by dropping the skb when TUNNEL_VXLAN_OPT is set but options_len is less than vxlan_metadata. This can void a potential out-of-bounds access on ip_tun_info.

Fixes: ee122c79d422 ("vxlan: Flow based tunneling") Signed-off-by: Xin Long lucien.xin@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/vxlan.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -2049,8 +2049,11 @@ static void vxlan_xmit_one(struct sk_buf label = info->key.label; udp_sum = !!(info->key.tun_flags & TUNNEL_CSUM);

- if (info->options_len) + if (info->options_len) { + if (info->options_len < sizeof(*md)) + goto drop; md = ip_tunnel_info_opts(info); + } } else { md->gbp = skb->mark; }

From: Eric Dumazet edumazet@google.com

[ Upstream commit a904a0693c189691eeee64f6c6b188bd7dc244e9 ]

Historically linux tried to stick to RFC 791, 1122, 2003 for IPv4 ID field generation.

RFC 6864 made clear that no matter how hard we try, we can not ensure unicity of IP ID within maximum lifetime for all datagrams with a given source address/destination address/protocol tuple.

Linux uses a per socket inet generator (inet_id), initialized at connection startup with a XOR of 'jiffies' and other fields that appear clear on the wire.

Thiemo Nagel pointed that this strategy is a privacy concern as this provides 16 bits of entropy to fingerprint devices.

Let's switch to a random starting point, this is just as good as far as RFC 6864 is concerned and does not leak anything critical.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet edumazet@google.com Reported-by: Thiemo Nagel tnagel@google.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/dccp/ipv4.c | 2 +- net/ipv4/datagram.c | 2 +- net/ipv4/tcp_ipv4.c | 4 ++-- net/sctp/socket.c | 2 +- 4 files changed, 5 insertions(+), 5 deletions(-)

--- a/net/dccp/ipv4.c +++ b/net/dccp/ipv4.c @@ -121,7 +121,7 @@ int dccp_v4_connect(struct sock *sk, str inet->inet_daddr, inet->inet_sport, inet->inet_dport); - inet->inet_id = dp->dccps_iss ^ jiffies; + inet->inet_id = prandom_u32();

err = dccp_connect(sk); rt = NULL; --- a/net/ipv4/datagram.c +++ b/net/ipv4/datagram.c @@ -75,7 +75,7 @@ int __ip4_datagram_connect(struct sock * inet->inet_dport = usin->sin_port; sk->sk_state = TCP_ESTABLISHED; sk_set_txhash(sk); - inet->inet_id = jiffies; + inet->inet_id = prandom_u32();

sk_dst_set(sk, &rt->dst); err = 0; --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -239,7 +239,7 @@ int tcp_v4_connect(struct sock *sk, stru inet->inet_sport, usin->sin_port);

- inet->inet_id = tp->write_seq ^ jiffies; + inet->inet_id = prandom_u32();

err = tcp_connect(sk);

@@ -1307,7 +1307,7 @@ struct sock *tcp_v4_syn_recv_sock(const inet_csk(newsk)->icsk_ext_hdr_len = 0; if (inet_opt) inet_csk(newsk)->icsk_ext_hdr_len = inet_opt->opt.optlen; - newinet->inet_id = newtp->write_seq ^ jiffies; + newinet->inet_id = prandom_u32();

if (!dst) { dst = inet_csk_route_child_sock(sk, newsk, req); --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -7734,7 +7734,7 @@ void sctp_copy_sock(struct sock *newsk, newinet->inet_rcv_saddr = inet->inet_rcv_saddr; newinet->inet_dport = htons(asoc->peer.port); newinet->pmtudisc = inet->pmtudisc; - newinet->inet_id = asoc->next_tsn ^ jiffies; + newinet->inet_id = prandom_u32();

newinet->uc_ttl = inet->uc_ttl; newinet->mc_loop = 1;

From: Masahiro Yamada yamada.masahiro@socionext.com

[ Upstream commit a73619a845d5625079cc1b3b820f44c899618388 ]

The __FILE__ macro is used everywhere in the kernel to locate the file printing the log message, such as WARN_ON(), etc. If the kernel is built out of tree, this can be a long absolute path, like this:

WARNING: CPU: 1 PID: 1 at /path/to/build/directory/arch/arm64/kernel/foo.c:...

This is because Kbuild runs in the objtree instead of the srctree, then __FILE__ is expanded to a file path prefixed with $(srctree)/.

Commit 9da0763bdd82 ("kbuild: Use relative path when building in a subdir of the source tree") improved this to some extent; $(srctree) becomes ".." if the objtree is a child of the srctree.

For other cases of out-of-tree build, __FILE__ is still the absolute path. It also means the kernel image depends on where it was built.

A brand-new option from GCC, -fmacro-prefix-map, solves this problem. If your compiler supports it, __FILE__ is the relative path from the srctree regardless of O= option. This provides more readable log and more reproducible builds.

Please note __FILE__ is always an absolute path for external modules.

Signed-off-by: Masahiro Yamada yamada.masahiro@socionext.com Signed-off-by: Sasha Levin sashal@kernel.org --- Makefile | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/Makefile b/Makefile index 19c7e30684077..62ce3766032c9 100644 --- a/Makefile +++ b/Makefile @@ -837,6 +837,9 @@ KBUILD_CFLAGS += $(call cc-option,-Werror=incompatible-pointer-types) # Require designated initializers for all marked structures KBUILD_CFLAGS += $(call cc-option,-Werror=designated-init)

+# change __FILE__ to the relative path from the srctree +KBUILD_CFLAGS += $(call cc-option,-fmacro-prefix-map=$(srctree)/=) + # use the deterministic mode of AR if available KBUILD_ARFLAGS := $(call ar-option,D)

From: Eric Dumazet edumazet@google.com

commit 55667441c84fa5e0911a0aac44fb059c15ba6da2 upstream.

UDP IPv6 packets auto flowlabels are using a 32bit secret (static u32 hashrnd in net/core/flow_dissector.c) and apply jhash() over fields known by the receivers.

Attackers can easily infer the 32bit secret and use this information to identify a device and/or user, since this 32bit secret is only set at boot time.

Really, using jhash() to generate cookies sent on the wire is a serious security concern.

Trying to change the rol32(hash, 16) in ip6_make_flowlabel() would be a dead end. Trying to periodically change the secret (like in sch_sfq.c) could change paths taken in the network for long lived flows.

Let's switch to siphash, as we did in commit df453700e8d8 ("inet: switch IP ID generator to siphash")

Using a cryptographically strong pseudo random function will solve this privacy issue and more generally remove other weak points in the stack.

Packet schedulers using skb_get_hash_perturb() benefit from this change.

Fixes: b56774163f99 ("ipv6: Enable auto flow labels by default") Fixes: 42240901f7c4 ("ipv6: Implement different admin modes for automatic flow labels") Fixes: 67800f9b1f4e ("ipv6: Call skb_get_hash_flowi6 to get skb->hash in ip6_make_flowlabel") Fixes: cb1ce2ef387b ("ipv6: Implement automatic flow label generation on transmit") Signed-off-by: Eric Dumazet edumazet@google.com Reported-by: Jonathan Berger jonathann1@walla.com Reported-by: Amit Klein aksecurity@gmail.com Reported-by: Benny Pinkas benny@pinkas.net Cc: Tom Herbert tom@herbertland.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Mahesh Bandewar maheshb@google.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- include/linux/skbuff.h | 3 +- include/net/flow_dissector.h | 3 +- include/net/fq.h | 2 - include/net/fq_impl.h | 4 +-- net/core/flow_dissector.c | 48 +++++++++++++++++-------------------------- net/sched/sch_fq_codel.c | 6 ++--- net/sched/sch_hhf.c | 8 +++---- net/sched/sch_sfb.c | 13 ++++++----- net/sched/sch_sfq.c | 14 +++++++----- 9 files changed, 49 insertions(+), 52 deletions(-)

--- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -1178,7 +1178,8 @@ static inline __u32 skb_get_hash_flowi4( return skb->hash; }

-__u32 skb_get_hash_perturb(const struct sk_buff *skb, u32 perturb); +__u32 skb_get_hash_perturb(const struct sk_buff *skb, + const siphash_key_t *perturb);

static inline __u32 skb_get_hash_raw(const struct sk_buff *skb) { --- a/include/net/flow_dissector.h +++ b/include/net/flow_dissector.h @@ -3,6 +3,7 @@

#include <linux/types.h> #include <linux/in6.h> +#include <linux/siphash.h> #include <uapi/linux/if_ether.h>

/** @@ -151,7 +152,7 @@ struct flow_dissector { struct flow_keys { struct flow_dissector_key_control control; #define FLOW_KEYS_HASH_START_FIELD basic - struct flow_dissector_key_basic basic; + struct flow_dissector_key_basic basic __aligned(SIPHASH_ALIGNMENT); struct flow_dissector_key_tags tags; struct flow_dissector_key_vlan vlan; struct flow_dissector_key_keyid keyid; --- a/include/net/fq.h +++ b/include/net/fq.h @@ -70,7 +70,7 @@ struct fq { struct list_head backlogs; spinlock_t lock; u32 flows_cnt; - u32 perturbation; + siphash_key_t perturbation; u32 limit; u32 memory_limit; u32 memory_usage; --- a/include/net/fq_impl.h +++ b/include/net/fq_impl.h @@ -105,7 +105,7 @@ static struct fq_flow *fq_flow_classify(

lockdep_assert_held(&fq->lock);

- hash = skb_get_hash_perturb(skb, fq->perturbation); + hash = skb_get_hash_perturb(skb, &fq->perturbation); idx = reciprocal_scale(hash, fq->flows_cnt); flow = &fq->flows[idx];

@@ -252,7 +252,7 @@ static int fq_init(struct fq *fq, int fl INIT_LIST_HEAD(&fq->backlogs); spin_lock_init(&fq->lock); fq->flows_cnt = max_t(u32, flows_cnt, 1); - fq->perturbation = prandom_u32(); + get_random_bytes(&fq->perturbation, sizeof(fq->perturbation)); fq->quantum = 300; fq->limit = 8192; fq->memory_limit = 16 << 20; /* 16 MBytes */ --- a/net/core/flow_dissector.c +++ b/net/core/flow_dissector.c @@ -563,45 +563,34 @@ out_bad: } EXPORT_SYMBOL(__skb_flow_dissect);

-static u32 hashrnd __read_mostly; +static siphash_key_t hashrnd __read_mostly; static __always_inline void __flow_hash_secret_init(void) { net_get_random_once(&hashrnd, sizeof(hashrnd)); }

-static __always_inline u32 __flow_hash_words(const u32 *words, u32 length, - u32 keyval) +static const void *flow_keys_hash_start(const struct flow_keys *flow) { - return jhash2(words, length, keyval); -} - -static inline const u32 *flow_keys_hash_start(const struct flow_keys *flow) -{ - const void *p = flow; - - BUILD_BUG_ON(FLOW_KEYS_HASH_OFFSET % sizeof(u32)); - return (const u32 *)(p + FLOW_KEYS_HASH_OFFSET); + BUILD_BUG_ON(FLOW_KEYS_HASH_OFFSET % SIPHASH_ALIGNMENT); + return &flow->FLOW_KEYS_HASH_START_FIELD; }

static inline size_t flow_keys_hash_length(const struct flow_keys *flow) { - size_t diff = FLOW_KEYS_HASH_OFFSET + sizeof(flow->addrs); - BUILD_BUG_ON((sizeof(*flow) - FLOW_KEYS_HASH_OFFSET) % sizeof(u32)); - BUILD_BUG_ON(offsetof(typeof(*flow), addrs) != - sizeof(*flow) - sizeof(flow->addrs)); + size_t len = offsetof(typeof(*flow), addrs) - FLOW_KEYS_HASH_OFFSET;

switch (flow->control.addr_type) { case FLOW_DISSECTOR_KEY_IPV4_ADDRS: - diff -= sizeof(flow->addrs.v4addrs); + len += sizeof(flow->addrs.v4addrs); break; case FLOW_DISSECTOR_KEY_IPV6_ADDRS: - diff -= sizeof(flow->addrs.v6addrs); + len += sizeof(flow->addrs.v6addrs); break; case FLOW_DISSECTOR_KEY_TIPC_ADDRS: - diff -= sizeof(flow->addrs.tipcaddrs); + len += sizeof(flow->addrs.tipcaddrs); break; } - return (sizeof(*flow) - diff) / sizeof(u32); + return len; }

__be32 flow_get_u32_src(const struct flow_keys *flow) @@ -667,14 +656,15 @@ static inline void __flow_hash_consisten } }

-static inline u32 __flow_hash_from_keys(struct flow_keys *keys, u32 keyval) +static inline u32 __flow_hash_from_keys(struct flow_keys *keys, + const siphash_key_t *keyval) { u32 hash;

__flow_hash_consistentify(keys);

- hash = __flow_hash_words(flow_keys_hash_start(keys), - flow_keys_hash_length(keys), keyval); + hash = siphash(flow_keys_hash_start(keys), + flow_keys_hash_length(keys), keyval); if (!hash) hash = 1;

@@ -684,12 +674,13 @@ static inline u32 __flow_hash_from_keys( u32 flow_hash_from_keys(struct flow_keys *keys) { __flow_hash_secret_init(); - return __flow_hash_from_keys(keys, hashrnd); + return __flow_hash_from_keys(keys, &hashrnd); } EXPORT_SYMBOL(flow_hash_from_keys);

static inline u32 ___skb_get_hash(const struct sk_buff *skb, - struct flow_keys *keys, u32 keyval) + struct flow_keys *keys, + const siphash_key_t *keyval) { skb_flow_dissect_flow_keys(skb, keys, FLOW_DISSECTOR_F_STOP_AT_FLOW_LABEL); @@ -737,7 +728,7 @@ u32 __skb_get_hash_symmetric(struct sk_b NULL, 0, 0, 0, FLOW_DISSECTOR_F_STOP_AT_FLOW_LABEL);

- return __flow_hash_from_keys(&keys, hashrnd); + return __flow_hash_from_keys(&keys, &hashrnd); } EXPORT_SYMBOL_GPL(__skb_get_hash_symmetric);

@@ -757,13 +748,14 @@ void __skb_get_hash(struct sk_buff *skb)

__flow_hash_secret_init();

- hash = ___skb_get_hash(skb, &keys, hashrnd); + hash = ___skb_get_hash(skb, &keys, &hashrnd);

__skb_set_sw_hash(skb, hash, flow_keys_have_l4(&keys)); } EXPORT_SYMBOL(__skb_get_hash);

-__u32 skb_get_hash_perturb(const struct sk_buff *skb, u32 perturb) +__u32 skb_get_hash_perturb(const struct sk_buff *skb, + const siphash_key_t *perturb) { struct flow_keys keys;

--- a/net/sched/sch_fq_codel.c +++ b/net/sched/sch_fq_codel.c @@ -57,7 +57,7 @@ struct fq_codel_sched_data { struct fq_codel_flow *flows; /* Flows table [flows_cnt] */ u32 *backlogs; /* backlog table [flows_cnt] */ u32 flows_cnt; /* number of flows */ - u32 perturbation; /* hash perturbation */ + siphash_key_t perturbation; /* hash perturbation */ u32 quantum; /* psched_mtu(qdisc_dev(sch)); */ u32 drop_batch_size; u32 memory_limit; @@ -75,7 +75,7 @@ struct fq_codel_sched_data { static unsigned int fq_codel_hash(const struct fq_codel_sched_data *q, struct sk_buff *skb) { - u32 hash = skb_get_hash_perturb(skb, q->perturbation); + u32 hash = skb_get_hash_perturb(skb, &q->perturbation);

return reciprocal_scale(hash, q->flows_cnt); } @@ -482,7 +482,7 @@ static int fq_codel_init(struct Qdisc *s q->memory_limit = 32 << 20; /* 32 MBytes */ q->drop_batch_size = 64; q->quantum = psched_mtu(qdisc_dev(sch)); - q->perturbation = prandom_u32(); + get_random_bytes(&q->perturbation, sizeof(q->perturbation)); INIT_LIST_HEAD(&q->new_flows); INIT_LIST_HEAD(&q->old_flows); codel_params_init(&q->cparams); --- a/net/sched/sch_hhf.c +++ b/net/sched/sch_hhf.c @@ -4,11 +4,11 @@ * Copyright (C) 2013 Nandita Dukkipati nanditad@google.com */

-#include <linux/jhash.h> #include <linux/jiffies.h> #include <linux/module.h> #include <linux/skbuff.h> #include <linux/vmalloc.h> +#include <linux/siphash.h> #include <net/pkt_sched.h> #include <net/sock.h>

@@ -125,7 +125,7 @@ struct wdrr_bucket {

struct hhf_sched_data { struct wdrr_bucket buckets[WDRR_BUCKET_CNT]; - u32 perturbation; /* hash perturbation */ + siphash_key_t perturbation; /* hash perturbation */ u32 quantum; /* psched_mtu(qdisc_dev(sch)); */ u32 drop_overlimit; /* number of times max qdisc packet * limit was hit @@ -263,7 +263,7 @@ static enum wdrr_bucket_idx hhf_classify }

/* Get hashed flow-id of the skb. */ - hash = skb_get_hash_perturb(skb, q->perturbation); + hash = skb_get_hash_perturb(skb, &q->perturbation);

/* Check if this packet belongs to an already established HH flow. */ flow_pos = hash & HHF_BIT_MASK; @@ -593,7 +593,7 @@ static int hhf_init(struct Qdisc *sch, s

sch->limit = 1000; q->quantum = psched_mtu(qdisc_dev(sch)); - q->perturbation = prandom_u32(); + get_random_bytes(&q->perturbation, sizeof(q->perturbation)); INIT_LIST_HEAD(&q->new_buckets); INIT_LIST_HEAD(&q->old_buckets);

--- a/net/sched/sch_sfb.c +++ b/net/sched/sch_sfb.c @@ -22,7 +22,7 @@ #include <linux/errno.h> #include <linux/skbuff.h> #include <linux/random.h> -#include <linux/jhash.h> +#include <linux/siphash.h> #include <net/ip.h> #include <net/pkt_sched.h> #include <net/inet_ecn.h> @@ -48,7 +48,7 @@ struct sfb_bucket { * (Section 4.4 of SFB reference : moving hash functions) */ struct sfb_bins { - u32 perturbation; /* jhash perturbation */ + siphash_key_t perturbation; /* siphash key */ struct sfb_bucket bins[SFB_LEVELS][SFB_NUMBUCKETS]; };

@@ -219,7 +219,8 @@ static u32 sfb_compute_qlen(u32 *prob_r,

static void sfb_init_perturbation(u32 slot, struct sfb_sched_data *q) { - q->bins[slot].perturbation = prandom_u32(); + get_random_bytes(&q->bins[slot].perturbation, + sizeof(q->bins[slot].perturbation)); }

static void sfb_swap_slot(struct sfb_sched_data *q) @@ -314,9 +315,9 @@ static int sfb_enqueue(struct sk_buff *s /* If using external classifiers, get result and record it. */ if (!sfb_classify(skb, fl, &ret, &salt)) goto other_drop; - sfbhash = jhash_1word(salt, q->bins[slot].perturbation); + sfbhash = siphash_1u32(salt, &q->bins[slot].perturbation); } else { - sfbhash = skb_get_hash_perturb(skb, q->bins[slot].perturbation); + sfbhash = skb_get_hash_perturb(skb, &q->bins[slot].perturbation); }

@@ -352,7 +353,7 @@ static int sfb_enqueue(struct sk_buff *s /* Inelastic flow */ if (q->double_buffering) { sfbhash = skb_get_hash_perturb(skb, - q->bins[slot].perturbation); + &q->bins[slot].perturbation); if (!sfbhash) sfbhash = 1; sfb_skb_cb(skb)->hashes[slot] = sfbhash; --- a/net/sched/sch_sfq.c +++ b/net/sched/sch_sfq.c @@ -18,7 +18,7 @@ #include <linux/errno.h> #include <linux/init.h> #include <linux/skbuff.h> -#include <linux/jhash.h> +#include <linux/siphash.h> #include <linux/slab.h> #include <linux/vmalloc.h> #include <net/netlink.h> @@ -120,7 +120,7 @@ struct sfq_sched_data { u8 headdrop; u8 maxdepth; /* limit of packets per flow */

- u32 perturbation; + siphash_key_t perturbation; u8 cur_depth; /* depth of longest slot */ u8 flags; unsigned short scaled_quantum; /* SFQ_ALLOT_SIZE(quantum) */ @@ -158,7 +158,7 @@ static inline struct sfq_head *sfq_dep_h static unsigned int sfq_hash(const struct sfq_sched_data *q, const struct sk_buff *skb) { - return skb_get_hash_perturb(skb, q->perturbation) & (q->divisor - 1); + return skb_get_hash_perturb(skb, &q->perturbation) & (q->divisor - 1); }

static unsigned int sfq_classify(struct sk_buff *skb, struct Qdisc *sch, @@ -607,9 +607,11 @@ static void sfq_perturbation(unsigned lo struct Qdisc *sch = (struct Qdisc *)arg; struct sfq_sched_data *q = qdisc_priv(sch); spinlock_t *root_lock = qdisc_lock(qdisc_root_sleeping(sch)); + siphash_key_t nkey;

+ get_random_bytes(&nkey, sizeof(nkey)); spin_lock(root_lock); - q->perturbation = prandom_u32(); + q->perturbation = nkey; if (!q->filter_list && q->tail) sfq_rehash(sch); spin_unlock(root_lock); @@ -681,7 +683,7 @@ static int sfq_change(struct Qdisc *sch, del_timer(&q->perturb_timer); if (q->perturb_period) { mod_timer(&q->perturb_timer, jiffies + q->perturb_period); - q->perturbation = prandom_u32(); + get_random_bytes(&q->perturbation, sizeof(q->perturbation)); } sch_tree_unlock(sch); kfree(p); @@ -737,7 +739,7 @@ static int sfq_init(struct Qdisc *sch, s q->quantum = psched_mtu(qdisc_dev(sch)); q->scaled_quantum = SFQ_ALLOT_SIZE(q->quantum); q->perturb_period = 0; - q->perturbation = prandom_u32(); + get_random_bytes(&q->perturbation, sizeof(q->perturbation));

if (opt) { int err = sfq_change(sch, opt);

From: Petr Vorel pvorel@suse.cz

Fix backport of commit f18ddc13af981ce3c7b7f26925f099e7c6929aba upstream.

Update backport to change ENOTSUPP to EOPNOTSUPP in alarm_timer_{del,set}(), which were removed in f2c45807d3992fe0f173f34af9c347d907c31686 in v4.13-rc1.

Fixes: 65b7a5a36afb11a6769a70308c1ef3a2afae6bf4

Signed-off-by: Petr Vorel pvorel@suse.cz Acked-by: Thadeu Lima de Souza Cascardo cascardo@canonical.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- kernel/time/alarmtimer.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/kernel/time/alarmtimer.c +++ b/kernel/time/alarmtimer.c @@ -586,7 +586,7 @@ static void alarm_timer_get(struct k_iti static int alarm_timer_del(struct k_itimer *timr) { if (!rtcdev) - return -ENOTSUPP; + return -EOPNOTSUPP;

if (alarm_try_to_cancel(&timr->it.alarm.alarmtimer) < 0) return TIMER_RETRY; @@ -610,7 +610,7 @@ static int alarm_timer_set(struct k_itim ktime_t exp;

if (!rtcdev) - return -ENOTSUPP; + return -EOPNOTSUPP;

if (flags & ~TIMER_ABSTIME) return -EINVAL;