This is a note to let you know that I've just added the patch titled

iio: pressure: bmp280: Fix waiting time for BMP3xx configuration

to my char-misc git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git in the char-misc-testing branch.

The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.)

The patch will be merged to the char-misc-next branch sometime soon, after it passes testing, and the merge window is open.

If you have any questions about this process, please let me know.

From 262a6634bcc4f0c1c53d13aa89882909f281a6aa Mon Sep 17 00:00:00 2001 From: Vasileios Amoiridis vassilisamir@gmail.com Date: Thu, 11 Jul 2024 23:15:50 +0200 Subject: iio: pressure: bmp280: Fix waiting time for BMP3xx configuration

According to the datasheet, both pressure and temperature can go up to oversampling x32. With this option, the maximum measurement time is not 80ms (this is for press x32 and temp x2), but it is 130ms nominal (calculated from table 3.9.2) and since most of the maximum values are around +15%, it is configured to 150ms.

Fixes: 8d329309184d ("iio: pressure: bmp280: Add support for BMP380 sensor family") Signed-off-by: Vasileios Amoiridis vassilisamir@gmail.com Link: https://patch.msgid.link/20240711211558.106327-3-vassilisamir@gmail.com Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com --- drivers/iio/pressure/bmp280-core.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c index cc8553177977..3deaa57bb3f5 100644 --- a/drivers/iio/pressure/bmp280-core.c +++ b/drivers/iio/pressure/bmp280-core.c @@ -1581,10 +1581,11 @@ static int bmp380_chip_config(struct bmp280_data *data) } /* * Waits for measurement before checking configuration error - * flag. Selected longest measure time indicated in - * section 3.9.1 in the datasheet. + * flag. Selected longest measurement time, calculated from + * formula in datasheet section 3.9.2 with an offset of ~+15% + * as it seen as well in table 3.9.1. */ - msleep(80); + msleep(150);

/* Check config error flag */ ret = regmap_read(data->regmap, BMP380_REG_ERROR, &tmp);