In order to support the 1024x600 panel on Yeeloong Loongson MIPS laptop, the original 1024x768-16 table was modified to 1024x600-16, without leaving the original. It causes problem on x86 laptop as the 1024x768-16 support was still claimed but not working.
Fix it by introducing the 1024x768-16 mode.
Signed-off-by: Yifeng Li tomli@tomli.me Cc: stable@vger.kernel.org # v4.4+ --- drivers/video/fbdev/sm712fb.c | 59 +++++++++++++++++++++++++++++++++++ 1 file changed, 59 insertions(+)
diff --git a/drivers/video/fbdev/sm712fb.c b/drivers/video/fbdev/sm712fb.c index a40d0ae7cb66..c39a2641182a 100644 --- a/drivers/video/fbdev/sm712fb.c +++ b/drivers/video/fbdev/sm712fb.c @@ -530,6 +530,65 @@ static const struct modeinit vgamode[] = { 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x15, 0x03, }, }, + { /* 1024 x 768 16Bpp 60Hz */ + 1024, 768, 16, 60, + /* Init_MISC */ + 0xEB, + { /* Init_SR0_SR4 */ + 0x03, 0x01, 0x0F, 0x03, 0x0E, + }, + { /* Init_SR10_SR24 */ + 0xF3, 0xB6, 0xC0, 0xDD, 0x00, 0x0E, 0x17, 0x2C, + 0x99, 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xC4, 0x30, 0x02, 0x01, 0x01, + }, + { /* Init_SR30_SR75 */ + 0x38, 0x03, 0x20, 0x09, 0xC0, 0x3A, 0x3A, 0x3A, + 0x3A, 0x3A, 0x3A, 0x3A, 0x00, 0x00, 0x03, 0xFF, + 0x00, 0xFC, 0x00, 0x00, 0x20, 0x18, 0x00, 0xFC, + 0x20, 0x0C, 0x44, 0x20, 0x00, 0x00, 0x00, 0x3A, + 0x06, 0x68, 0xA7, 0x7F, 0x83, 0x24, 0xFF, 0x03, + 0x0F, 0x60, 0x59, 0x3A, 0x3A, 0x00, 0x00, 0x3A, + 0x01, 0x80, 0x7E, 0x1A, 0x1A, 0x00, 0x00, 0x00, + 0x50, 0x03, 0x74, 0x14, 0x3B, 0x0D, 0x09, 0x02, + 0x04, 0x45, 0x30, 0x30, 0x40, 0x20, + }, + { /* Init_SR80_SR93 */ + 0xFF, 0x07, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0x3A, + 0xF7, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0x3A, 0x3A, + 0x00, 0x00, 0x00, 0x00, + }, + { /* Init_SRA0_SRAF */ + 0x00, 0xFB, 0x9F, 0x01, 0x00, 0xED, 0xED, 0xED, + 0x7B, 0xFB, 0xFF, 0xFF, 0x97, 0xEF, 0xBF, 0xDF, + }, + { /* Init_GR00_GR08 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F, + 0xFF, + }, + { /* Init_AR00_AR14 */ + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, + 0x41, 0x00, 0x0F, 0x00, 0x00, + }, + { /* Init_CR00_CR18 */ + 0xA3, 0x7F, 0x7F, 0x00, 0x85, 0x16, 0x24, 0xF5, + 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x03, 0x09, 0xFF, 0x80, 0x40, 0xFF, 0x00, 0xE3, + 0xFF, + }, + { /* Init_CR30_CR4D */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x02, 0x20, + 0x00, 0x00, 0x00, 0x40, 0x00, 0xFF, 0xBF, 0xFF, + 0xA3, 0x7F, 0x00, 0x86, 0x15, 0x24, 0xFF, 0x00, + 0x01, 0x07, 0xE5, 0x20, 0x7F, 0xFF, + }, + { /* Init_CR90_CRA7 */ + 0x55, 0xD9, 0x5D, 0xE1, 0x86, 0x1B, 0x8E, 0x26, + 0xDA, 0x8D, 0xDE, 0x94, 0x00, 0x00, 0x18, 0x00, + 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x15, 0x03, + }, + }, { /* mode#5: 1024 x 768 24Bpp 60Hz */ 1024, 768, 24, 60, /* Init_MISC */
On Sun, Mar 17, 2019 at 06:25:03AM +0800, Yifeng Li wrote:
In order to support the 1024x600 panel on Yeeloong Loongson MIPS laptop, the original 1024x768-16 table was modified to 1024x600-16, without leaving the original. It causes problem on x86 laptop as the 1024x768-16 support was still claimed but not working.
Fix it by introducing the 1024x768-16 mode.
Signed-off-by: Yifeng Li tomli@tomli.me Cc: stable@vger.kernel.org # v4.4+
Tested-by: Sudip Mukherjee sudipm.mukherjee@gmail.com
-- Regards Sudip
linux-stable-mirror@lists.linaro.org