From: Christoph Schemmel christoph.schemmel@gmail.com
[ Upstream commit a4dc7eee9106a9d2a6e08b442db19677aa9699c7 ]
Adding support for Cinterion MV31 with PID 0x00B7.
T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 11 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=1e2d ProdID=00b7 Rev=04.14 S: Manufacturer=Cinterion S: Product=Cinterion USB Mobile Broadband S: SerialNumber=b3246eed C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
Signed-off-by: Christoph Schemmel christoph.schemmel@gmail.com Link: https://lore.kernel.org/r/20210202084523.4371-1-christoph.schemmel@gmail.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 72a3a5dc51319..5a1d21aae2a9e 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -1354,6 +1354,7 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x1e2d, 0x0082, 5)}, /* Cinterion PHxx,PXxx (2 RmNet) */ {QMI_FIXED_INTF(0x1e2d, 0x0083, 4)}, /* Cinterion PHxx,PXxx (1 RmNet + USB Audio)*/ {QMI_QUIRK_SET_DTR(0x1e2d, 0x00b0, 4)}, /* Cinterion CLS8 */ + {QMI_FIXED_INTF(0x1e2d, 0x00b7, 0)}, /* Cinterion MV31 RmNet */ {QMI_FIXED_INTF(0x413c, 0x81a2, 8)}, /* Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card */ {QMI_FIXED_INTF(0x413c, 0x81a3, 8)}, /* Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card */ {QMI_FIXED_INTF(0x413c, 0x81a4, 8)}, /* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card */
From: Raju Rangoju rajur@chelsio.com
[ Upstream commit 3401e4aa43a540881cc97190afead650e709c418 ]
Signed-off-by: Raju Rangoju rajur@chelsio.com Link: https://lore.kernel.org/r/20210202182511.8109-1-rajur@chelsio.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/chelsio/cxgb4/t4_pci_id_tbl.h | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_pci_id_tbl.h b/drivers/net/ethernet/chelsio/cxgb4/t4_pci_id_tbl.h index 0c5373462cedb..0b1b5f9c67d47 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4_pci_id_tbl.h +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_pci_id_tbl.h @@ -219,6 +219,7 @@ CH_PCI_DEVICE_ID_TABLE_DEFINE_BEGIN CH_PCI_ID_TABLE_FENTRY(0x6089), /* Custom T62100-KR */ CH_PCI_ID_TABLE_FENTRY(0x608a), /* Custom T62100-CR */ CH_PCI_ID_TABLE_FENTRY(0x608b), /* Custom T6225-CR */ + CH_PCI_ID_TABLE_FENTRY(0x6092), /* Custom T62100-CR-LOM */ CH_PCI_DEVICE_ID_TABLE_DEFINE_END;
#endif /* __T4_PCI_ID_TBL_H__ */
From: Shyam Prasad N sprasad@microsoft.com
[ Upstream commit a738c93fb1c17e386a09304b517b1c6b2a6a5a8b ]
While debugging another issue today, Steve and I noticed that if a subdir for a file share is already mounted on the client, any new mount of any other subdir (or the file share root) of the same share results in sharing the cifs superblock, which e.g. can result in incorrect device name.
While setting prefix path for the root of a cifs_sb, CIFS_MOUNT_USE_PREFIX_PATH flag should also be set. Without it, prepath is not even considered in some places, and output of "mount" and various /proc/<>/*mount* related options can be missing part of the device name.
Signed-off-by: Shyam Prasad N sprasad@microsoft.com Reviewed-by: Aurelien Aptel aaptel@suse.com Signed-off-by: Steve French stfrench@microsoft.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/cifs/connect.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index ab9eeb5ff8e57..67c2e6487479a 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -4198,6 +4198,7 @@ int cifs_setup_cifs_sb(struct smb_vol *pvolume_info, cifs_sb->prepath = kstrdup(pvolume_info->prepath, GFP_KERNEL); if (cifs_sb->prepath == NULL) return -ENOMEM; + cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_USE_PREFIX_PATH; }
return 0;
From: Rong Chen rong.a.chen@intel.com
[ Upstream commit 93ca696376dd3d44b9e5eae835ffbc84772023ec ]
The kernel test robot reported the following issue:
CC [M] drivers/soc/litex/litex_soc_ctrl.o sh4-linux-objcopy: Unable to change endianness of input file(s) sh4-linux-ld: cannot find drivers/soc/litex/.tmp_gl_litex_soc_ctrl.o: No such file or directory sh4-linux-objcopy: 'drivers/soc/litex/.tmp_mx_litex_soc_ctrl.o': No such file
The problem is that the format of input file is elf32-shbig-linux, but sh4-linux-objcopy wants to output a file which format is elf32-sh-linux:
$ sh4-linux-objdump -d drivers/soc/litex/litex_soc_ctrl.o | grep format drivers/soc/litex/litex_soc_ctrl.o: file format elf32-shbig-linux
Link: https://lkml.kernel.org/r/20210210150435.2171567-1-rong.a.chen@intel.com Link: https://lore.kernel.org/linux-mm/202101261118.GbbYSlHu-lkp@intel.com Signed-off-by: Rong Chen rong.a.chen@intel.com Reported-by: kernel test robot lkp@intel.com Cc: Yoshinori Sato ysato@users.osdn.me Cc: Rich Felker dalias@libc.org Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- scripts/recordmcount.pl | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/scripts/recordmcount.pl b/scripts/recordmcount.pl index 3f77a5d695c13..0bafed857e171 100755 --- a/scripts/recordmcount.pl +++ b/scripts/recordmcount.pl @@ -268,7 +268,11 @@ if ($arch eq "x86_64") {
# force flags for this arch $ld .= " -m shlelf_linux"; - $objcopy .= " -O elf32-sh-linux"; + if ($endian eq "big") { + $objcopy .= " -O elf32-shbig-linux"; + } else { + $objcopy .= " -O elf32-sh-linux"; + }
} elsif ($arch eq "powerpc") { my $ldemulation;
linux-stable-mirror@lists.linaro.org
-
Sasha Levin